Search

When estimating soil organic carbon using visible and near-infrared spectra measured in situ, the interference of soil moisture content (SMC) needs to be eliminated. The existing SMC removal methods are mainly based on spectral transformation, but they change the original form of the soil spectrum. In this article, a new deep-learning-based SMC influence removal network (MIRNet) is proposed to establish the relationship between the spectra of moist soil and that of dry soil. This method constructs a spectral extraction module with two 1-D ghost modules to extract soil spectral characteristics and a context extraction module with a two-layer dilated convolutional neural network to extract the context information of the spectra. Then, these extracted features are combined to reconstruct the SMC influence with a two-layer deconvolution using residual learning. Finally, a new loss function that combines spectral distance and spectral shape measurement (D-S loss) is proposed. The input of MIRNet is the moist soil spectra, and the output is the dry soil spectra. Black soil collected from Harbin and yellow-brown soil collected from Nanjing are selected as the research objects. The $ R^{2}$ reaches 0.703, 0.747, 0.907, 0.892, 0.866, 0.907, and 0.926, respectively, when using spectra processed by external parameter orthogonalization, orthogonal signal correction, support vector regression, convolutional neural network, deep neural network, denoising convolutional neural network, and MIRNet. Therefore, the proposed MIRNet achieves competitive results compared with these state-of-the-art methods.

Abstract Over the past years the International Global Navigation Satellite System (GNSS) Monitoring and Assessment System (iGMAS) Wuhan Innovation Application Center (IAC) dedicated to exploring the potential of multi-GNSS signals and providing a set of products and services. This contribution summarizes the strategies, achievements, and innovations of multi-GNSS orbit/clock/bias determination in iGMAS Wuhan IAC. Both the precise products and Real-Time Services (RTS) are evaluated and discussed. The precise orbit and clock products have comparable accuracy with the precise products of the International GNSS Service (IGS) and iGMAS. The multi-frequency code and phase bias products for Global Positioning System (GPS), BeiDou Navigation Satellite System (BDS), Galileo navigation satellite system (Galileo), and GLObal NAvigation Satellite System (GLONASS) are provided to support multi-GNSS and multi-frequency Precise Point Positioning (PPP) Ambiguity Resolution (AR). Compared with dual-frequency PPP AR, the time to first fix of triple-frequency solution is improved by 30%. For RTS, the proposed orbit prediction strategy improves the three dimensional accuracy of predicted orbit by 1 cm. The multi-thread strategy and high-performance matrix library are employed to accelerate the real-time orbit and clock determination. The results with respect to the IGS precise products show the high accuracy of RTS orbits and clocks, 4–9 cm and 0.1–0.2 ns, respectively. Using real-time satellite corrections, real-time PPP solutions achieve satisfactory performance with horizontal and vertical positioning errors within 2 and 4 cm, respectively, and convergence time of 16.97 min.

Introduction: As a successor to Haiyang-2A (HY-2A), HY-2B is China’s second marine dynamic satellite. Equipped with a scanning microwave radiometer (SMR), it can measure the precipitable water vapor (PWV) over the oceans, providing valuable climate and weather insights. This study aims to evaluate the accuracy of HY-2B SMR PWV data from January 2019 to December 2021 using various validation methods.Methods: to validate HY-2B SMR PWV, fifth-generation European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis (ERA5) data, radiosonde data, and global navigation satellite system (GNSS) observations are used.Results: the validation shows that the HY-2B SMR PWV data agree well with the ERA5 PWV data, with a root mean square error (RMSE) of 1.61 mm and a mean value of 0.71 mm. However, RMSEs of approximately 3.5 mm are observed when comparing the HY-2B SMR PWV data to GNSS and radiosonde data, likely due to temporal and spatial gaps. Geographically, there are greater differences between the HY-2B SMR and ERA5 in lower-latitude areas. The reason could be attributed to a higher water vapor content and more frequent cloudy weather in the areas.Discussion: The results demonstrate that the HY-2B SMR PWV meets requirement (RMSE≤3.5 mm). The HY-2B SMR PWV has a high quality, with a slight observational drift of only 0.1 mm/year, but regular validation and calibration are still necessary.

Abstract Automatic modulation classification (AMC) is a core technique in noncooperative communication systems. In particular, feature-based (FB) AMC algorithms have been widely studied. Current FB AMC methods are commonly designed for a limited set of modulation and lack of generalization ability; to tackle this challenge, a robust AMC method using convolutional neural networks (CNN) is proposed in this paper. In total, 15 different modulation types are considered. The proposed method can classify the received signal directly without feature extracion, and it can automatically learn features from the received signals. The features learned by the CNN are presented and analyzed. The robust features of the received signals in a specific SNR range are studied. The accuracy of classification using CNN is shown to be remarkable, particularly for low SNRs. The generalization ability of robust features is also proven to be excellent using the support vector machine (SVM). Finally, to help us better understand the process of feature learning, some outputs of intermediate layers of the CNN are visualized.

In multiple-input multiple-output wireless communication system, artificial noise (AN) is designed to be aligned into the null space of the legitimate channel so that it has no effect on the legitimate channel. Meanwhile, AN will reduce the secrecy capacity of the eavesdropping channel so that AN increase the secrecy capacity of the wireless communication system. Nevertheless, AN technology only pays attention to the CSI of the legitimate channel but does not pay attention to the CSI of the eavesdropping channel so that the secrecy capacity of the system can be further improved. In this paper, we analyze the performance of traditional AN. A secrecy capacity optimization artificial noise for the whole communication system to further improve the system's secrecy capacity is proposed. The secrecy capacity optimization artificial noise is considered as a kind of artificial noise which is disadvantageous to the legitimate receiver but more disadvantageous to the eavesdropper. Furthermore, we further analyzed the technical details of AN technology and found the key factor affecting the secrecy capacity. Meanwhile, the secrecy capacity optimization artificial noise is effectively designed by applying these conclusions and the key factors of secrecy capacity optimization artificial noise affecting the secrecy capacity of the wireless communication system are described. The analysis and simulation results in practical environments show that the proposed method has a good performance on improving the secrecy capacity.

Cognitive radio, as a key technology to improve the utilization of radio spectrum, acquired much attention. Moreover, spectrum sensing has an irreplaceable position in the field of cognitive radio and was widely studied. The convolutional neural networks (CNNs) and the gate recurrent unit (GRU) are complementary in their modelling capabilities. In this paper, we introduce a CNN-GRU network to obtain the local information for single-node spectrum sensing, in which CNN is used to extract spatial feature and GRU is used to extract the temporal feature. Then, the combination network receives the features extracted by the CNN-GRU network to achieve multifeatures combination and obtains the final cooperation result. The cooperative spectrum sensing scheme based on Multifeatures Combination Network enhances the sensing reliability by fusing the local information from different sensing nodes. To accommodate the detection of multiple types of signals, we generated 8 kinds of modulation types to train the model. Theoretical analysis and simulation results show that the cooperative spectrum sensing algorithm proposed in this paper improved detection performance with no prior knowledge about the information of primary user or channel state. Our proposed method achieved competitive performance under the condition of large dynamic signal-to-noise ratio.

Laguerre-Gaussian (LG) beams with orbital angular momenta (OAM) are widely used in optical communication systems to increase capacities because of their orthogonality and completeness. However, the apertures of practical OAM-based multiplexing systems are always finite and inevitably affect the orthogonality and completeness. In this paper, the influences of finite apertures on the orthogonality of LG eigen beams and on the completeness of the set of LG bases are investigated. The closed-form inner product of arbitrary LG beams in finite apertures is derived. The results show that in finite apertures, the orthogonality of LG eigen beams with the same topological charge is partially lost, whereas the orthogonality of those with different integer topological charges is preserved and independent of the aperture sizes and the radial indices. The subset of LG eigen beams satisfying the root mean square radius condition is proven to be incomplete by evaluating the approximation accuracy of the truncated LG expansions of arbitrary real-order LG beams. The peaks of the root mean square error of the truncated LG expansions are greater than 0.225 under the root mean square radius condition when approximating fractional LG beams. The results can be utilized in analyzing and designing optical communication systems using LG beams with both radial and azimuthal degrees of freedom under the finite aperture limitation.

Unmanned aerial vehicle (UAV) is suitable to improve connectivity of wireless communication networks in harsh environment due to its flexible deployment and high mobility. In this paper, we consider the case that a UAV is employed as a mobile relay to ferry data between two disconnected ground nodes. The amplify-and-forward mobile relay technique is studied. By exploiting the channel state variation induced by the movement of UAV, we consider maximizing the end-to-end throughput of this mobile relay system by optimizing the source/relay power allocation, as well as the UAV's trajectory. However, the formulated problem is non-convex and intractable to solve. To address this non-convex problem, we propose two iterative algorithms to optimize the source/relay power allocation with the fixed UAV's trajectory and the UAV's trajectory with fixed power allocation, by successive convex optimization, respectively. Then, an iterative algorithm is proposed to optimize the source/relay power allocation and UAV's trajectory in an alternate manner. By exploiting the predictable channel variation via the proposed power and trajectory optimization scheme, numerical results show that significant throughput gains can be achieved.

Convolutional neural networks have an immense impact on computer vision tasks. However, the accuracy of convolutional neural networks on a dataset is tremendously affected when images within the dataset highly vary. Test images of plant leaves are usually taken in situ. These images, apart from the region of interest, contain unwanted parts of plants, soil, rocks, and/or human body parts. Segmentation helps isolate the target region and a deep convolutional neural network classifies images precisely. Therefore, we combined edge and morphological based segmentation, background subtraction, and the convolutional neural network to help improve accuracy on image sets with images containing clean and cluttered backgrounds. In the proposed system, segmentation was applied to first extract leaf images in the foreground. Several images contained a leaf of interest interposed between unfavorable foregrounds and backgrounds. Background subtraction was implemented to remove the foreground image followed by segmentation to obtain the region of interest. Finally, the images were classified by a pre-trained classification network. The experimental results on two, four, and eight classes of datasets show that the proposed method achieves 98.7%, 96.7%, and 93.57% accuracy by fine-tuned DenseNet121, InceptionV3, and DenseNet121 models, respectively, on a clean dataset. For two class datasets, the accuracy obtained was about 12% higher for a dataset with images taken in the homogeneous background compared to that of a dataset with testing images with a cluttered background. Results also suggest that image sets with clean backgrounds tend to start training with higher accuracy and converge faster.

Automatic modulation classification (AMC) plays a key role in non-cooperative communication systems. Feature-based (FB) methods have been widely studied in particular. Most existing FB methods are deployed at a fixed SNR level, and the pre-trained classifiers may no longer be effective when the SNR level changes. The classifiers may also need to be re-trained to be suitable for the varying channel environment. To address these problems, a robust AMC method under varying noise conditions is proposed in this paper. The method attempts to select noise-insensitive features from a large feature set to ensure that the trained classifiers will be robust to SNR variations. First, a feature set consisting of 25 types of features is extracted, and 4 features that are insensitive to noise are chosen through a feature selection method based on rough set theory. The generalizability of an SVM classifier trained on the 4 chosen features is evaluated based on numerical results. The classification accuracy remains reasonable when the SNR varies between 5 and 20 dB, indicating that the proposed method can be deployed under varying noise conditions.

In this paper, we consider the physical layer security problem of the wireless communication system. For the multiple-input, multiple-output (MIMO) wireless communication system, secrecy capacity optimization artificial noise (SCO−AN) is introduced and studied. Unlike its traditional counterpart, SCO−AN is an artificial noise located in the range space of the channel state information space and thus results in a significant increase in the secrecy capacity. Due to the limitation of transmission power, making rational use of this power is crucial to effectively increase the secrecy capacity. Hence, in this paper, the objective function of transmission power allocation is constructed. We also consider the imperfect channel estimation in the power allocation problems. In traditional AN research conducted in the past, the expression of the imperfect channel estimation effect was left unknown. Still, the extent to which the channel estimation error impacts the accuracy of secrecy capacity computation is not negligible. We derive the expression of channel estimation error for least square (LS) and minimum mean squared error (MMSE) channel estimation. The objective function for transmission power allocation is non-convex. That is, the traditional gradient method cannot be used to solve this non-convex optimization problem of power allocation. An improved sequence quadratic program (ISQP) is therefore applied to solve this optimization problem. The numerical result shows that the ISQP is better than other algorithms, and the power allocation as derived from ISQP significantly increases secrecy capacity.

Automatic Modulation Classification (AMC) is of paramount importance in wireless communication systems. Existing methods usually adopt a single category of neural network or stack different categories of networks in series, and rarely extract different types of features simultaneously in a proper way. When it comes to the output layer, softmax function is applied for classification to expand the inter-class distance. In this paper, we propose a hybrid parallel network for the AMC problem. Our proposed method designs a hybrid parallel structure which utilizes Convolution Neural Network (CNN) and Gate Rate Unit (GRU) to extract spatial features and temporal features respectively. Instead of superposing these two categories of features directly, three different attention mechanisms are applied to assign weights for different types of features. Finally, a cosine similarity metric named Additive Margin softmax function, which can expand the inter-class distance and compress the intra-class distance simultaneously, is adopted for output. Simulation results demonstrate that the proposed method can achieve remarkable performance on an open access dataset.

In this paper, the decision-level data fusion techniques are extended to the multiuser detection (MUD) field. Then two novel MUD algorithms, that is the chairman arbitrating decision-level fusion criterion (CA-DFC) based MUD algorithm and the veto logic decision-level fusion criterion (VL-DFC) based MUD algorithm, are proposed for DS-UWB communication systems. In CA-DFC based method, the chairman can make his arbitration among the preliminary decisions from sub-optimal detectors by his own rule. In the VL-DFC based method, the undetermined bits in these preliminary decisions are considered to construct a simplified solution space, and then the chairman can make his final decision within this space. Simulation results demonstrate that the performances of CA-DFC and VL-DFC based MUD algorithms are superior to those of other sub-optimal MUD algorithms, and even close to that of OMD. Moreover, both of these proposed algorithms have lower computational complexity than OMD, which reveals their efficiency. Compared with CA-DFC, VL-DFC based algorithm achieves a little improvement in its performance, at the cost of the increment in its computational complexity. Thus, they can be applied to different practical situations.

Orthogonal frequency division multiple access (OFDMA), which is widely used in the wireless sensor networks, allows different users to obtain different subcarriers according to their subchannel gains. Therefore, how to assign subcarriers and power to different users to achieve a high system sum rate is an important research area in OFDMA systems. In this paper, the focus of study is on the rate adaptive (RA) based resource allocation with proportional fairness constraints. Since the resource allocation is a NP-hard and non-convex optimization problem, a new efficient resource allocation algorithm ACO-SPA is proposed, which combines ant colony optimization (ACO) and suboptimal power allocation (SPA). To reduce the computational complexity, the optimization problem of resource allocation in OFDMA systems is separated into two steps. For the first one, the ant colony optimization algorithm is performed to solve the subcarrier allocation. Then, the suboptimal power allocation algorithm is developed with strict proportional fairness, and the algorithm is based on the principle that the sums of power and the reciprocal of channel-to-noise ratio for each user in different subchannels are equal. To support it, plenty of simulation results are presented. In contrast with root-finding and linear methods, the proposed method provides better performance in solving the proportional resource allocation problem in OFDMA systems.

Interference alignment (IA) is a novel technique that can effectively eliminate the interference and approach the sum capacity of wireless sensor networks (WSNs) when the signal-to-noise ratio (SNR) is high, by casting the desired signal and interference into different signal subspaces. The traditional alternating minimization interference leakage (AMIL) algorithm for IA shows good performance in high SNR regimes, however, the complexity of the AMIL algorithm increases dramatically as the number of users and antennas increases, posing limits to its applications in the practical systems. In this paper, a novel IA algorithm, called directional quartic optimal (DQO) algorithm, is proposed to minimize the interference leakage with rapid convergence and low complexity. The properties of the AMIL algorithm are investigated, and it is discovered that the difference between the two consecutive iteration results of the AMIL algorithm will approximately point to the convergence solution when the precoding and decoding matrices obtained from the intermediate iterations are sufficiently close to their convergence values. Based on this important property, the proposed DQO algorithm employs the line search procedure so that it can converge to the destination directly. In addition, the optimal step size can be determined analytically by optimizing a quartic function. Numerical results show that the proposed DQO algorithm can suppress the interference leakage more rapidly than the traditional AMIL algorithm, and can achieve the same level of sum rate as that of AMIL algorithm with far less iterations and execution time.

Spectrum sensing technology plays an increasingly important role in cognitive radio networks. Consequently, several spectrum sensing algorithms have been proposed in the literature. In this paper, we present a new spectrum sensing algorithm “Differential Characteristics-Based OFDM (DC-OFDM)” for detecting OFDM signal on account of differential characteristics. We put the primary value on channel gain Ɵ around zero to detect the presence of primary user. Furthermore, utilizing the same method of differential operation, we improve two traditional OFDM sensing algorithms (cyclic prefix and pilot tones detecting algorithms), and propose a “Differential Characteristics-Based Cyclic Prefix (DC-CP)” detector and a “Differential Characteristics-Based Pilot Tones (DC-PT)” detector, respectively. DC-CP detector is based on auto-correlation vector to sense the spectrum, while the DC-PT detector takes the frequency-domain cross-correlation of PT as the test statistic to detect the primary user. Moreover, the distributions of the test statistics of the three proposed methods have been derived. Simulation results illustrate that all of the three proposed methods can achieve good performance under low signal to noise ratio (SNR) with the presence of timing delay. Specifically, the DC-OFDM detector gets the best performance among the presented detectors. Moreover, both of the DC-CP and DC-PT detector achieve significant improvements compared with their corresponding original detectors.

The major challenges for Ultra-wide Band (UWB) indoor ranging systems are the dense multipath and non-line-of-sight (NLOS) problems of the indoor environment. To precisely estimate the time of arrival (TOA) of the first path (FP) in such a poor environment, a novel approach of entropy-based TOA estimation and support vector machine (SVM) regression-based ranging error mitigation is proposed in this paper. The proposed method can estimate the TOA precisely by measuring the randomness of the received signals and mitigate the ranging error without the recognition of the channel conditions. The entropy is used to measure the randomness of the received signals and the FP can be determined by the decision of the sample which is followed by a great entropy decrease. The SVM regression is employed to perform the ranging-error mitigation by the modeling of the regressor between the characteristics of received signals and the ranging error. The presented numerical simulation results show that the proposed approach achieves significant performance improvements in the CM1 to CM4 channels of the IEEE 802.15.4a standard, as compared to conventional approaches.

Interference alignment (IA) has been put forward as a promising technique which can mitigate interference and effectively increase the throughput of wireless sensor networks (WSNs). However, the number of users is strictly restricted by the IA feasibility condition, and the interference leakage will become so strong that the quality of service will degrade significantly when there are more users than that IA can support. In this paper, a novel joint spatial-code clustered (JSCC)-IA scheme is proposed to solve this problem. In the proposed scheme, the users are clustered into several groups so that feasible IA can be achieved within each group. In addition, each group is assigned a pseudo noise (PN) code in order to suppress the inter-group interference via the code dimension. The analytical bit error rate (BER) expressions of the proposed JSCC-IA scheme are formulated for the systems with identical and different propagation delays, respectively. To further improve the performance of the JSCC-IA scheme in asymmetric networks, a random grouping selection (RGS) algorithm is developed to search for better grouping combinations. Numerical results demonstrate that the proposed JSCC-IA scheme is capable of accommodating many more users to communicate simultaneously in the same frequency band with better performance.

Haiyang-2A (HY-2A) has been working in-flight for over seven years, and the accuracy of HY-2A calibration microwave radiometer (CMR) data is extremely important for the wet troposphere delay correction (WTC) in sea surface height (SSH) determination. We present a comprehensive evaluation of the HY-2A CMR observation using the numerical weather model (NWM) for all the data available period from October 2011 to February 2018, including the WTC and the precipitable water vapor (PWV). The ERA(ECMWF Re-Analysis)-Interim products from European Centre for Medium-Range Weather Forecasts (ECMWF) are used for the validation of HY-2A WTC and PWV products. In general, a global agreement of root-mean-square (RMS) of 2.3 cm in WTC and 3.6 mm in PWV are demonstrated between HY-2A observation and ERA-Interim products. Systematic biases are revealed where before 2014 there was a positive WTC/PWV bias and after that, a negative one. Spatially, HY-2A CMR products show a larger bias in polar regions compared with mid-latitude regions and tropical regions and agree better in the Antarctic than in the Arctic with NWM. Moreover, HY-2A CMR products have larger biases in the coastal area, which are all caused by the brightness temperature (TB) contamination from land or sea ice. Temporally, the WTC/PWV biases increase from October 2011 to March 2014 with a systematic bias over 1 cm in WTC and 2 mm in PWV, and the maximum RMS values of 4.62 cm in WTC and 7.61 mm in PWV occur in August 2013, which is because of the unsuitable retrieval coefficients and systematic TB measurements biases from 37 GHz band. After April 2014, the TB bias is corrected, HY-2A CMR products agree very well with NWM from April 2014 to May 2017 with the average RMS of 1.68 cm in WTC and 2.65 mm in PWV. However, since June 2017, TB measurements from the 18.7 GHz band become unstable, which led to the huge differences between HY-2A CMR products and the NWM with an average RMS of 2.62 cm in WTC and 4.33 mm in PWV. HY-2A CMR shows high accuracy when three bands work normally and further calibration for HY-2A CMR is in urgent need. Furtherly, 137 global coastal radiosonde stations were used to validate HY-2A CMR. The validation based on radiosonde data shows the same variation trend in time of HY-2A CMR compared to the results from ECMWF, which verifies the results from ECMWF.

Due to the increasing complexity of electromagnetic signals, there exists a significant challenge for recognizing radar emitter signals. In this paper, a hybrid recognition approach is presented that classifies radar emitter signals by exploiting the different separability of samples. The proposed approach comprises two steps, namely the primary signal recognition and the advanced signal recognition. In the former step, a novel rough k-means classifier, which comprises three regions, i.e., certain area, rough area and uncertain area, is proposed to cluster the samples of radar emitter signals. In the latter step, the samples within the rough boundary are used to train the relevance vector machine (RVM). Then RVM is used to recognize the samples in the uncertain area; therefore, the classification accuracy is improved. Simulation results show that, for recognizing radar emitter signals, the proposed hybrid recognition approach is more accurate, and presents lower computational complexity than traditional approaches.

High throughput, low latency and reliable communication has always been a hot topic for wireless sensor networks (WSNs) in various applications. Multiuser detection is widely used to suppress the bad effect of multiple access interference in WSNs. In this paper, a novel multiuser detection method based on differential characteristics is proposed to suppress multiple access interference. The proposed iterative receive method consists of three stages. Firstly, a differential characteristics function is presented based on the optimal multiuser detection decision function; then on the basis of differential characteristics, a preliminary threshold detection is utilized to find the potential wrongly received bits; after that an error bit corrector is employed to correct the wrong bits. In order to further lower the bit error ratio (BER), the differential characteristics calculation, threshold detection and error bit correction process described above are iteratively executed. Simulation results show that after only a few iterations the proposed multiuser detection method can achieve satisfactory BER performance. Besides, BER and near far resistance performance are much better than traditional suboptimal multiuser detection methods. Furthermore, the proposed iterative multiuser detection method also has a large system capacity.

A new multiple access scheme, Waveform Division Multiple Access (WDMA) based on the orthogonal wavelet function, is presented. After studying the correlation properties of different categories of single wavelet functions, the one with the best correlation property will be chosen as the foundation for combined waveform. In the communication system, each user is assigned to different combined orthogonal waveform. Demonstrated by simulation, combined waveform is more suitable than single wavelet function to be a communication medium in WDMA system. Due to the excellent orthogonality, the bit error rate (BER) of multiuser with combined waveforms is so close to that of single user in a synchronous system. That is to say, the multiple access interference (MAI) is almost eliminated. Furthermore, even in an asynchronous system without multiuser detection after matched filters, the result is still pretty ideal and satisfactory by using the third combination mode that will be mentioned in the study.

A fast and robust ellipse-detection method based on sorted merging is proposed in this paper. This method first represents the edge bitmap approximately with a set of line segments and then gradually merges the line segments into elliptical arcs and ellipses. To achieve high accuracy, a sorted merging strategy is proposed: the merging degrees of line segments/elliptical arcs are estimated, and line segments/elliptical arcs are merged in descending order of the merging degrees, which significantly improves the merging accuracy. During the merging process, multiple properties of ellipses are utilized to filter line segment/elliptical arc pairs, making the method very efficient. In addition, an ellipse-fitting method is proposed that restricts the maximum ratio of the semimajor axis and the semiminor axis, further improving the merging accuracy. Experimental results indicate that the proposed method is robust to outliers, noise, and partial occlusion and is fast enough for real-time applications.

This study mainly focuses on multiuser detection in tracking and data relay satellite (TDRS) system forward link. Minimum mean square error (MMSE) is a low complexity multiuser detection method, but MMSE detector cannot achieve satisfactory bit error ratio and near-far resistance, whereas artificial fish swarm algorithm (AFSA) is expert in optimization and it can realize the global convergence efficiently. Therefore, a hybrid multiuser detector based on MMSE and AFSA (MMSE-AFSA) is proposed in this paper. The result of MMSE and its modified formations are used as the initial values of artificial fishes to accelerate the speed of global convergence and reduce the iteration times for AFSA. The simulation results show that the bit error ratio and near-far resistance performances of the proposed detector are much better, compared with MF, DEC, and MMSE, and are quite close to OMD. Furthermore, the proposed MMSE-AFSA detector also has a large system capacity.

Artificial Bee Colony (ABC) algorithm is an optimization algorithm based on the intelligent behavior of honey bee swarm. The ABC algorithm was developed to solve optimizing numerical problems and revealed premising results in processing time and solution quality. In ABC, a colony of artificial bees search for rich artificial food sources; the optimizing numerical problems are converted to the problem of finding the best parameter which minimizes an objective function. Then, the artificial bees randomly discover a population of initial solutions and then iteratively improve them by employing the behavior: moving towards better solutions by means of a neighbor search mechanism while abandoning poor solutions. In this paper, an efficient multiuser detector based on a suboptimal code mapping multiuser detector and artificial bee colony algorithm (SCM-ABC-MUD) is proposed and implemented in direct-sequence ultra-wideband (DS-UWB) systems under the additive white Gaussian noise (AWGN) channel. The simulation results demonstrate that the BER and the near-far effect resistance performances of this proposed algorithm are quite close to those of the optimum multiuser detector (OMD) while its computational complexity is much lower than that of OMD. Furthermore, the BER performance of SCM-ABC-MUD is not sensitive to the number of active users and can obtain a large system capacity.