Search

In order to tackle the issue of terramycin mycelial dreg (TMD) diagnosis and removal of terramycin and antibiotic resistance genes (ARGs), this study adopted aerobic composting (AC) technology and added homemade compound microbial inoculum (HCMI) to promote the AC of TMD and enhance the removal of terramycin and ARGs. The findings demonstrated that terramycin residue could be basically harmless after AC. Moreover, HCMI not only reduced QacB and tetH but also increased the degradation rates of VanRA, VanT, and dfrA24 by 40.81%, 5.65%, and 54.18%, respectively. The HCMI improved the removal rate of ARG subtypes to a certain extent. According to redundancy analysis, during AC, the succession of the microbial community had a stronger influence on the variance of ARG subtype than the environmental conditions. Differences in the abundance of various bacteria due to changes in temperature may be an intrinsic mechanism for the variation of ARG subtypes.

Antibiotic mycelial residues (AMRs), as recyclable hazardous waste, can realize efficient utilization by reasonable treatment. To solve the problems of undeveloped pore structure and low specific surface area existed in AMR biochar, this study first modified biochar by phosphoric acid (H

To address the problem of antibiotic mycelial dreg (AMD) treatment and removal of antibiotic resistance genes (ARGs), this study adopted anaerobic digestion (AD) technology, and added biochar (BC) and biochar loaded with nanosized zero-valent iron (nZVI-BC) to promote the AD of AMD and enhance the removal of ARGs. Results showed that nZVI-BC was better than BC in promoting AD due to the hydrogen evolution corrosion and the synergistic effect of nZVI and BC. In addition, BC and nZVI-BC can enhance the oxidative stress response and reduce ammonia stress phenomenon, which significantly reduces the abundance of aadA, ant(2″)-Ⅰ, qacEdelta1 and sul1. In conclusion, the enhance effect of nZVI-BC is greater than BC. The removal efficiency rates of nZVI-BC on the above-mentioned four ARGs were improved by 33%, 9%, 24% and 11%.

This study investigated methane production, long-chain fatty acids (LCFAs) profile, and predominant microorganisms in anaerobic digestion (AD) of lipid-rich swine slaughterhouse waste (SSW). The maximum methane yield was 999.2 mL/g VS. LCFAs, as inhibitory hydrolysis products, accumulated first to 1165 mg/L on day 3, and then decreased sharply to 125.7 mg/L on day 9, and finally were degraded to 20 mg/L on day 27. Linoleic acid (C18:2), oleic acid (C18:1) and palmitic acid (C16:0) were the dominant LCFAs. The easy conversion of C18:1 to C16:0 compared with difficult degradation of C16:0 resulted in an increase of C16:0 on day 4–6. Predominant microorganisms were Clostridium, Syntrophomonas and Methanospirillum. This study proved the high methane potential of lipid-rich SSW and gained insights into the degradation process by analysis of intermediates of LCFAs and predominant microorganisms. The results can provide valuable guidance for efficient utilization of this waste to produce methane in future.

Dry-wet combined anaerobic digestion is a novel approach for treating lignocellulosic waste by increasing the organic load of reactor while accelerating the conversion of organic acids. Here, we investigated the effect of regulated substrate ratios and initial pH in the dry acidogenesis stage on the bioconversion efficiency of dry-wet combined anaerobic digestion. Our data revealed microbial interactions and further identified key microbes based on microbial co-occurrence network analysis. On day three of acidification, the kinetic hydrolysis rate and acidification yield reached 1.66 and 60.07%, respectively; this was attributed to enhancement of the synergistic effect between Clostridiales and Methanosaeta, which increased the proportion of corn straw in the substrate or lowered the initial spray slurry pH to 5.5-6.5. With increased acidification capacity, acetoclastic methanogens were enriched in the wet methanogenesis stage; the syntrophic effect of Syntrophomonadales, Syntrophobacterales and Methanospirillum, meanwhile, was enhanced, leading to an overall improvement in biogas production.

The purpose of this study was to evaluate biomethane production in anaerobic digestion of swine slaughterhouse waste (SSW) and the effect of lipase pretreatment on biomethane yield. Lipase extracted from porcine pancreas was employed to hydrolyze SSW at 37 °C for 24 h. Three different lipase concentrations of 0.04, 0.2, and 0.4% (w/v) were adopted. Anaerobic digestion was carried out in batch style for 50 days. The results showed that the highest experimental biomethane yield (EMY) of 851.6 mL/g of VSadded was achieved when the lipase concentration of 0.2% (w/v) was used, which was significantly higher (18.4%; α < 0.05) than that of the untreated group. Furthermore, the highest biodegradability (Bd) of 72.7% was also achieved at 0.2% (w/v) lipase-pretreated group. Results proved that the conversion of SSW to biomethane was improved through pretreatment of lipase hydrolysis and offered a promising method for disposal of SSW.

China produces large amount of cotton stalk (CS) residues as agricultural biomass, which are incinerated on-site, causing air pollution. The high organic content of CS could be utilized for biogas production, but the direct digestion without pretreatment always leads to a low methane yield and biodegradability, due to the complicated structure of lignocellulose. In order to search best fitting pretreatment methods in effective anaerobic digestion (AD) of CS, effects of various pretreatments including KOH, NaOH, Ca(OH)2, alkali hydrogen peroxide (AHP), H2SO4, H3PO4 and steam explosion (SE) were studied. It was seen that all treatments resulted in varying methane yields. Among all the pretreatments, acid pretreatment is not suitable for AD of CS. The results showed that the highest cumulative methane yield (CMY) of 192.4 mL·gVS−1 was obtained after 3% AHP pretreatment of CS, and the methane yield improved by 254.3% than the untreated CS. Therefore, AHP treatment was proven to be an efficient pretreatment technique. XRD and FTIR analyses had shown that pretreated CS had favorable structural changes. This research is beneficial in developing environment friendly and cost-effective pretreatment technologies to utilize CS for methane production in future application.