Search

Abstract Metallacyclobutadienes (MCBDs) are key intermediates of alkyne metathesis reactions. There are in principle two isomerization pathway from kinetic to thermodynamic MCBDs, intermolecular and intramolecular. However, systems that simultaneously isolate two kinds of MCBD isomers have not been achieved, thus restricting the mechanistic studies of the isomerization. Here the reactivity of a metallapentalyne that contains an M≡C bond within the aromatic ring, with alkynes to afford a series of MCBD‐fused metallapentalenes is studied. In some cases, both kinetic and thermodynamic products are isolated in the same system, which has never been observed in previous MCBD reactions. Furthermore, the isomerization of MCBD‐fused metallapentalenes is investigated both experimentally and theoretically, indicating that it is an intramolecular process involving a metallatetrahedrane (MTd) intermediate. This research provides experimental evidence demonstrating that one MCBD can undergo intramolecular rearrangement to transform into another.

Abstract Carbolong complexes are one of the primary types of metallaaromatics, and they include metallapentalynes and metallapentalenes. A series of 7C-10C and 12C-carbolong complexes with planar ligand skeletons respectively containing 7-10 and 12 carbon atoms in their backbones, have been previously reported. Herein, two classes of strained substances, metallabenzyne-fused metallapentalenes and metallabenzene-fused metallapentalynes, were prepared, both representing 11C-carbolong complexes with a planar carbon-chain ligand. Furthermore, the former type is also the carbolong derivatives containing a metallabenzyne skeleton, another primary metallaaromatic framework. Metallabenzyne-fused metallapentalenes show versatile reactivities, and the most interesting one is the metal carbyne bond shift from a 6-membered to a more strained 5-membered ring, affording the above-mentioned metallabenzene-fused metallapentalyne. This work makes carbolong chemistry more complete, and provides a method to achieve metallabenzynes, which is anticipated to concurrently advance the development of these two types of metallaaromatics.

Benzene, as a typical toxic gas and carcinogen, is an important detection object in the field of environmental monitoring. However, it remains challenging for the conventional resistance-type gas sensor to effectively detect low-concentration (ppb-level) benzene gas molecules, owing to their insufficient reaction activation energy, especially when operating at room temperature. Herein, a field-effect transistor (FET)-type gas sensor using carbon nanotubes as a channel material is proposed for the efficient detection of trace benzene, where carbon nanotubes (CNTs) with high semiconductor purity act as the main channel material, and ZnO/WS2 nanocomposites serve as the gate sensitive material. On the basis of the remarkable amplification effect in CNTs-based FET, the proposed gas sensor manifests desirable sensitive ability with the detection limit as low as 500 ppb for benzene even working at room temperature, and the sensor also exhibits fast response speed (90 s), high consistency with a response deviation of less than 5%, and long-term stability of up to 30 days. Furthermore, utilizing Tenax TA as the screening unit, the as-proposed gas sensor can achieve the feasible selective detection of benzene. These experimental results demonstrate that the strategy proposed here can provide significant guidance for the development of high-performance gas sensors to detect trace benzene gas at room temperature.

Highlights Highly performed perovskite solar cells are achieved via introducing organic–inorganic CL–NH complex as multifunctional interfacial layer. CL–NH complex not only reduces oxygen vacancies on the surface of SnO2 but also regulates film crystallization, resulting in a superior device efficiency of 23.69%. The resulting device performs excellent stability with 91.5% initial power conversion efficiency retained after 500 h light illumination.

Objective: Transmission of antimicrobial resistant bacteria between people and household pets, such as dogs and cats, is an emerging global public health problem. This scoping review synthesized existing evidence of human-pet bacteria transmission to understand the magnitude and breadth of this issue. Methods: The search included specific and generic terms for bacteria, resistance, transmission, pets, and humans. Searches were conducted through PubMed, Scopus, Web of Science, CABI Global Health, Networked Digital Library of Theses and Dissertations, Google Scholar. All studies published in English and Mandarin that isolated bacteria from pets (cats and dogs) and humans who had contact with the pets, and reported phenotypic or genotypic antimicrobial sensitivity test results, were included in this review. In cases of bacterial species that are commonly associated with pets, such as Staphylococcus pseudintermedius and Pasteurella multocida, we also included studies that only isolated bacteria from humans. Results: After removing duplication, the search captured 9355 studies. A total of 1098 papers were screened in the full-text review, and 562 studies were identified as eligible according to our inclusion criteria. The primary reason for exclusion was the lack of sensitivity testing. The included studies were published between 1973 and 2021. The most common study location was the United States (n = 176, 31.3%), followed by the United Kingdom (n = 53, 9.4%), Japan (n = 29, 5.2%), and Canada (n = 25, 4.4%). Most of the included studies were case reports (n = 367, 63.4%), cross-sectional/prevalence studies (n = 130, 22.4%), and case series (n = 51, 8.8%). Only few longitudinal studies (n = 14, 2.4%), case-control studies (n = 12, 2.1%), and cohort studies (n = 5, 0.9%) were included in our review. Most studies focused on Pasteurella multocida (n = 221, 39.3%), Staphylococcus aureus (n = 81, 14.4%), and Staphylococcus pseudintermedius (n = 52, 8.9%). For the 295 studies that used strain typing methods to compare bacteria from humans and pets, most used DNA banding pattern-based methods (n = 133, 45.1%) and DNA sequencing-based methods (n = 118, 40.0%). Conclusion: Transmission of bacteria could occur in both directions: pets to humans (e.g., S. pseudintermedius and P. multocida) and humans to pets (e.g., S. aureus). The majority of studies provided a low level of evidence of transmission (e.g., case reports), suggesting that more rigorous longitudinal, cohort, or case-control studies are needed to fully understand the risk of human-pet resistant bacterial transmission.

BackgroundCerebral amyloid angiopathy (CAA) is the most common cause of lobar intracerebral hemorrhage (ICH) in the elderly, and its multifocal and recurrent nature leads to high rates of disability and mortality. Therefore, this study aimed to summarize the evidence regarding the recurrence rate and risk factors for CAA-related ICH (CAA-ICH).MethodsWe performed a systematic literature search of all English studies published in PubMed, Embase, Web of Science, Cochrane Library, Scopus, and CINAHL from inception to June 10, 2023. Studies reporting CAA-ICH recurrence rates and risk factors for CAA-ICH recurrence were included. We calculated pooled odds ratios (ORs) with their corresponding 95% confidence intervals (CIs) using a random/fixed-effects model based on the I2 assessment of heterogeneity between studies. Publication bias was assessed using Egger's test.ResultsThirty studies were included in the final analysis. Meta-analysis showed that the recurrence rate of CAA-ICH was 23% (95% CI: 18–28%, I2 = 96.7%). The risk factors significantly associated with CAA-ICH recurrence were: previous ICH (OR = 2.03; 95% CI: 1.50–2.75; I2 = 36.8%; N = 8), baseline ICH volume (OR = 1.01; 95% CI: 1–1.02; I2 = 0%; N = 4), subarachnoid hemorrhage (cSAH) (OR = 3.05; 95% CI: 1.86–4.99; I2 = 0%; N = 3), the presence of cortical superficial siderosis (cSS) (OR = 2.04; 95% CI: 1.46–2.83; I2 = 0%; N = 5), disseminated cSS (OR = 3.21; 95% CI: 2.25–4.58; I2 = 16.0%; N = 6), and centrum semiovale-perivascular spaces (CSO-PVS) severity (OR = 1.67; 95% CI: 1.14–2.45; I2 = 0%; N = 4).ConclusionCAA-ICH has a high recurrence rate. cSAH, cSS (especially if disseminated), and CSO-PVS were significant markers for recurrent CAA-ICH. The onset of ICH in patients with CAA is usually repeated several times, and recurrence is partly related to the index ICH volume. Identifying clinical and neuroimaging predictors of CAA-ICH recurrence is of great significance for evaluating outcomes and improving the prognosis of patients with CAA-ICH.Systematic review registrationhttps://www.crd.york.ac.uk/PROSPERO/display_record.php?RecordID=400240, identifier [CRD42023400240].

Antimicrobial resistance (AMR) is a global One Health threat. A portion of AMR development can be attributed to antimicrobial use (AMU) in animals, including dairy cattle. Quantifying AMU on U.S. dairy farms is necessary to inform antimicrobial stewardship strategies and help evaluate the relationship between AMU and AMR. Many AMU indicators have been proposed for quantifying AMU in dairy cattle. However, these indicators are difficult to interpret and compare because they differ in the type of data used, the calculation approach, and the definitions of variables and parameters used in the calculation. Therefore, we selected 16 indicators (count-based, mass-based, and dose-based) applicable for quantifying AMU on U.S. dairy farms. We systematized the indicators by standardizing their variables and parameters to improve their interchangeability, interpretation, and comparability. We scored indicators against six data-driven criteria (assessing their accuracy, data and effort needs, and level of privacy concern) and five stewardship-driven criteria (assessing their ability to capture trends and inform antimicrobial stewardship). The derived standardized indicators will aid farmers and veterinarians in selecting suitable indicators based on data availability and stewardship needs on a farm. The comparison of indicators revealed a trade-off requiring farmers to balance the granularity of data necessary for an accurate indicator and effort to collect the data, and a trade-off relevant to farmers interested in data sharing to inform stewardship because more accurate indicators are typically based on more sensitive information. Indicators with better accuracy tended to score better in stewardship criteria. Overall, two dose-based indicators, estimating the number of treatments and administered doses, scored best in accuracy and stewardship. Conversely, two count-based indicators, estimating the length of AMU, and a mass-based indicator, estimating the mass of administered antimicrobials, performed best in the effort and privacy criteria. These findings are expected to benefit One Health by aiding the uptake of farm-level AMU indicators by U.S. dairy farms.

Abstract Background The position of the aorta relative to the spine in kyphosis secondary to Pott's deformity is little understood. The purpose of this study was to investigate the anatomic relationship between the aorta and the spine in patients with Pott’s deformity and to compare it with the normal people. Methods Seventy-six patients with Pott’s deformity (Group TB) and seventy-two age- and sex-matched patients with a normal spine (group NC) were enrolled in this study. The relative position of aorta to the spine was evaluated from T4 to L4 on the computed tomographic angiography scans for controls and at the apex level for TB patient, and was classified into 4 kinds of degrees. Results The left pedicle-aorta angle in group TB was significantly larger than that in group NC at the T6-L3 levels. Group TB exhibited significantly smaller left pedicle-aorta distance, pedicular line-aorta distance and vertebra/rib-aorta distance than those in group NC at the T5-T10 levels, but bigger at the L1-3 levels. Patients with grade 3 and 4 aorta had more segments involved compared with those with grade 1 aorta. Patients with grade 2, 3, and 4 aorta showed larger kyphotic angles than those with grade 1. Conclusions Patients whose morbid segments involved only thoracic vertebrae presented with an “Ω” shaped aorta in sagittal plane, and 4 different kinds of degrees of aorta relative to the vertebra/rib in axial plane. Patients whose morbid segments covered lumbar vertebrae presented with an “M” shaped aorta in sagittal plane, and the aorta shifted further from apex vertebra but was located in close proximity to the vertebral body at levels above and below the osteotomy levels in axial plane.

IntroductionKaixinsan (KXS) has been in use as an effective classic formulation of traditional Chinese medicine for depression. However, its active components and action mechanism against depression remain elusive. The purpose of this study was to summarize and evaluate the efficacy and potential pharmacological mechanisms of KXS in antidepressant treatment.Materials and methodsReports on the use of KXS in the treatment of depression were systematically collected from PubMed, Web of Science, Embase, China National Knowledge Infrastructure, Chongqing VIP, and Wanfang Data from the establishment to July 2022, including those on mood disorders in neurological diseases such as Alzheimer’s disease. Meta-analysis was conducted with the Review Manager 5.3 software. Online datasets, traditional Chinese medicine system pharmacological analysis platform, GeneCards, online Mendelian inheritance in man, and DisGeNET were used to investigate the depression-related genes. The gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichments were performed to construct the ‘component-target-pathways’ network using Metascape online analyses.ResultTen studies were included in the analysis. Meta-analysis showed that both low-dose KXS (SMD = 19.66, Z = 7.96, and I2 = 42%) and high-dose KXS (SMD = 23.84, Z = 8.46, and I2 = 13%) could increase the sucrose preference in depression models. In addition, 5-hydroxytryptamine (5-HT) (SMD = 10.91, Z = 2.95, and I2 = 50%) returned to normal level after the treatment at low dose KXS. In network pharmacology, 50 active components and 376 gene targets were screened out. AKT1, GAPDH, ALB, TNF, and TP53 were the core target proteins. GO analysis showed that KXS mainly treats depression in biological processes such as response to drugs, cellular calcium ion homeostasis, and regulation of chemical synaptic signal transmission. KEGG results show that the mechanism of action of KXS in treating depression is through neural activity ligand-receptor interaction, the calcium signaling and CAMP signaling pathways.DiscussionThe study reveals the active components and potential molecular mechanism of KXS in the treatment of depression and provides evidence for future basic research.

Abstract Perovskite solar cells (PSCs) via two‐step sequential method have received great attention in recent years due to their high reproducibility and low processing costs. However, the relatively high trap‐state density and poor charge carrier extraction efficiency pose challenges. Herein, highly efficient and stable PSCs via a two‐step sequential method are fabricated using organic—inorganic (OI) complexes as multifunctional interlayers. In addition to reduce the under‐coordinated Pb2+ ions related trap states by forming interactions with the functional groups, the complexes interlayer tends to form dipole moment which can enhance the built‐in electric field, thus facilitating charge carrier extraction. Consequently, with rational molecular design, the resulting devices with a vertical dipole moment that parallels with the built‐in electric field yield a champion efficiency of 23.55% with negligible hysteresis. More importantly, the hydrophobicity of the (OI) complexes contributes to an excellent ambient stability of the resulting device with 91% of initial efficiency maintained after 3000 h storage.

Offshore wind farms (OWFs) have developed rapidly in recent years. However, it is difficult to accurately evaluate their impact on marine ecosystems and the marine environment due to the complexity of marine dynamic monitoring and various marine environment evaluation indicators. The spatial distribution of chlorophyll-a (Chl-a) on the surface of seawater is one of basic spatial information of the sea area, which is the key determines the distribution and productivity of offshore biological resources at different spatial levels. Evaluating the impact of OWFs on the spatial distribution of Chl-a is of significance but the research carried out to date has been scarce. In this study, 682 Landsat images were selected from 1990 to 2021 as well as 38 OWFs from around the world as the research areas. The spatial distribution of Chl-a on the sea surface was calculated using the O’Reilly band ratio OC2 algorithm and HU color index (CI) algorithm and the influence of OWFs on the spatial distribution pattern of Chl-a was determined by using the global and local Moran Indexes. Among the 38 wind farms, it was found that: (1) the spatial autocorrelation of Chl-a concentration at 37 wind farms increased after the construction of the wind turbines; (2) the spatial distribution pattern of Chl-a at 28 wind farms showed pronounced aggregation after the construction of the wind turbines. Therefore, it was determined that the construction of OWFs will change the spatial distribution pattern of Chl-a, which may affect the original balance of local marine ecosystems.

The salinization and alkalization of soil are widespread environmental problems. Sugar beet (B. vulgaris L.) is a moderately salt tolerant glycophyte, but little is known about the different mechanisms of sugar beet response to salt and alkaline stresses. The aim of this study was to investigate the influence of neutral salt (NaCl:Na2SO4, 1:1) and alkaline salt (Na2CO3) treatment on physiological and transcriptome changes in sugar beet. We found that a low level of neutral salt (NaCl:Na2SO4; 1:1, Na+ 25 mM) or alkaline salt (Na2CO3, Na+ 25 mM) significantly enhanced total biomass, leaf area and photosynthesis indictors in sugar beet. Under a high concentration of alkaline salt (Na2CO3, Na+ 100 mM), the growth of plants was not significantly affected compared with the control. But a high level of neutral salt (NaCl: Na2SO4; 1:1, Na+ 100 mM) significantly inhibited plant growth and photosynthesis. Furthermore, sugar beet tends to synthesize higher levels of soluble sugar and reducing sugar to cope with high neutral salt stress, and more drastic changes in indole acetic acid (IAA) and abscisic acid (ABA) contents were detected. We used next-generation RNA-Seq technique to analyze transcriptional changes under neutral salt and alkaline salt treatment in sugar beet. Overall, 4,773 and 2,251 differentially expressed genes (DEGs) were identified in leaves and roots, respectively. Kyoto encyclopedia of genes and genomes (KEGG) analysis showed that genes involving cutin, suberine and wax biosynthesis, sesquiterpenoid and triterpenoid biosynthesis and flavonoid biosynthesis had simultaneously changed expression under low neutral salt or alkaline salt, so these genes may be related to stimulating sugar beet growth in both low salt treatments. Genes enriched in monoterpenoid biosynthesis, amino acids metabolism and starch and sucrose metabolism were specifically regulated to respond to the high alkaline salt. Meanwhile, compared with high alkaline salt, high neutral salt induced the expression change of genes involved in DNA replication, and decreased the expression of genes participating in cutin, suberine and wax biosynthesis, and linoleic acid metabolism. These results indicate the presence of different mechanisms responsible for sugar beet responses to neutral salt and alkaline salt stresses.

This paper analyzes the unique nonlinear characteristics of a high-speed drive circuit for proportional solenoid, i.e., the inverse discharging drive circuit (IDDC), which has a faster discharging speed than a traditional drive circuit. The experimental results clearly show the piecewise nonlinear relationship between the current and the pulse-width modulation (PWM) duty ratio of the control signal of the IDDC. The mathematical model of the IDDC working processes in one PWM period is constructed in detail to analyze the IDDC nonlinear characteristics. The computational equations of the significant nonlinear features, including the critical PWM duty ratio, the steady-state current, the amplitude of the current oscillation, and the response time of the circuit, are deduced through algebraic analyses, which are verified by a comparison between the experimental and calculated results. These analyses aid the design and control of a solenoid drive circuit for a hydraulic proportional valve. Finally, a modified PI controller that considers the nonlinear characteristics of the IDDC is designed, and the experimental results show that the designed controller significantly improves the response speed of the solenoid current.

An improved scheme of a dual-switch forward converter is proposed in this paper. Compared with the original converter, the new one can provide higher resetting voltage during the hold-up time interval under the action of an additional reset capacitor. Namely, it allows the converter's duty cycle to be larger than 50%. As a result, the proposed method can transfer more energy stored in the bulk capacitor to the load side during the hold-up interval. Therefore, a smaller bulk capacitor can be used for the converter's hold-up time requirement. Since the additional reset capacitor acts only as a compensation, it would not affect other performance of the converter. The additional circuit can be applied for the dual-switch forward converter when small-volume and high power density are required. The working principle and the performance of the converter are analysed, and the relevant theory formulas are deduced. Then the parameters of key components are given. Finally, the theoretical analysis is validated through a 200 W experimental prototype.

The prediction of remaining useful life is an important function of battery management systems. Existing research typically focused on factors that determine the quantity of the remaining useful capacity, and are able to determine the remaining useful capacity several years before battery failure to counter hysteresis of variables of lead–acid batteries. These techniques are not suitable at the end of service-life for backup batteries. This paper proposes a linear-superposition–voltage-aging model with three improvements. First, the estimation of the deep-discharge of the proposed voltage model does not require the remaining useful capacity. Second, the internal resistance of the deep-discharge is predicted from the contacting resistance of electrochemical impedance spectroscopy. Third, a morphology correction factor of internal resistance is about to saturate at the end of battery service-life. The model accurately forecasts battery failure at the end of service-life in two groups of accelerated-aging experiments. The proposed method in this paper focuses on the factors that determine quality of remaining useful capacity to counter hysteresis of variables of lead–acid batteries and judge battery failure at the end of service-life.

Fusarium asiaticum belongs to one of the phylogenetical subgroups of the F. graminearum species complex and is epidemically predominant in the East Asia area. The life cycle of F. asiaticum is significantly regulated by light. In this study, the fungal blue light receptor white collar complex (WCC), including FaWC1 and FaWC2, were characterized in F. asiaticum. The knockout mutants ΔFawc1 and ΔFawc2 were generated by replacing the target genes via homologous recombination events. The two mutants showed similar defects in light-induced carotenoid biosynthesis, UV-C resistance, sexual fruiting body development, and the expression of the light-responsive marker genes, while in contrast, all these light responses were characteristics in wild-type (WT) and their complementation strains, indicating that FaWC1 and FaWC2 are involved in the light sensing of F. asiaticum. Unexpectedly, however, the functions of Fawc1 and Fawc2 diverged in regulating virulence, as the ΔFawc1 was avirulent to the tested host plant materials, but ΔFawc2 was equivalent to WT in virulence. Moreover, functional analysis of FaWC1 by partial disruption revealed that its light−oxygen−voltage (LOV) domain was required for light sensing but dispensable for virulence, and its Zinc-finger domain was required for virulence expression but not for light signal transduction. Collectively, these results suggest that the conserved fungal blue light receptor WCC not only endows F. asiaticum with light-sensing ability to achieve adaptation to environment, but it also regulates virulence expression by the individual component FaWC1 in a light-independent manner, and the latter function opens a way for investigating the pathogenicity mechanisms of this important crop disease agent.

Both the frequency domain Nyquist curve of electrochemical impedance spectroscopy (EIS) and time domain simulation of DC equivalent first principle linear circuit (FPLCDCequ) are some of the fundamentals of lead-acid batteries management system design. The Nyquist curve is used to evaluate batteries’ state of health (SoH), but the curve does not distinguish charging/discharging impedances on electrode−electrolyte interfaces in the frequency domain. FPLCDCequ is used to simulate batteries’ terminal electrical variables, and the circuit distinguishes charging/discharging impedances on electrode−electrolyte interfaces in the time domain. Therefore, there is no direct physical relationship between Nyquist and FPLCDCequ This paper proposes an AC equivalent first principle linear circuit (FPLCACequ) by average switch modeling, and the novel circuit distinguishes charging/discharging impedances on electrode−electrolyte interfaces in Nyquist. The novel circuit establishes a physical bridge between Nyquist and FPLCDCequ for lead-acid batteries management system design.

In order to reduce the cost and improve the reliability, real-time performance, and installation convenience of remote-controlled light-emitting diode (LED) lighting systems, a networked LED driving technology based on the direct current (DC) grid power line carrier is proposed. In this system, an alternating current (AC)/DC bus converter converts the mains into a DC bus with multiple distributed LED drive powers on the DC bus. The AC/DC bus converter receives the user’s control command and modulates it into the DC bus voltage. The DC bus waveform changes to a square wave containing the high and low changes of the address information and command information. The LED drive power of the corresponding address receives energy from the DC bus and demodulates the commands, such as turning the lights on and off, dimming, etc., and performs the action. In order to make the waveform of the AC/DC bus converter have better rising and falling edge, this paper adopts the half-bridge topology with variable modal control. In the modulation process, the circuit works in buck mode and boost mode. Distributed LED drivers have DC/DC circuits and very simple demodulation circuits that dissipate energy and information from the DC bus. Through experiments, the technology not only simplifies the use of communication technology in application, but also reduces the application difficulty.