Search

To solve the problem of the lack of physical properties of pedicels and the changing pattern for designing the end-effector of tomato harvesting robot and different harvesting modes, research was conducted on the physical properties of tomato pedicels and their change patterns. Using a Universal TA texture analyzer, tensile, three-point bending, and shearing tests were performed on tomato pedicels in the early firm-ripening stage. The tomato variety used was Syngenta Spectrum, cultivated seasonally with two crops per year. Spring crop tomatoes were used in this study. The experimental results provide a theoretical basis for designing tomato harvesting robots across three harvesting modes. Tensile tests measured the pull-off force and tensile strength of the abscission zone with varying diameters. These results are crucial for designing robots using a tensile harvesting mode. The location of the tomato pedicel significantly affects the shearing force. A one-way test was conducted on the shearing part. The results showed that the shearing force and energy required for the proximal pedicel are significantly greater than for the distal pedicel. To reduce the shearing force and energy needed by the end-effector's shearing mechanism on distal pedicels, a response surface test was conducted. Three factors were examined: shearing speed, angle, and distal pedicel diameter. Design–Expert software optimized these factors to minimize shearing energy and force, leading to the best shearing parameters for different distal pedicel diameters. From the three-point bending tests, the average maximum bending breaking force, bending modulus, and bending strength of the tomato abscission zone were determined. These findings offer a theoretical basis for designing tomato harvesting robots with a bending-type harvesting mode. [ABSTRACT FROM AUTHOR]

Tomatoes are a critical economic crop. The realization of tomato harvesting automation is of great significance in solving the labor shortage and improving the efficiency of the current harvesting operation. Accurate recognition of fruits is the key to realizing automated harvesting. Harvesting fruit at optimum ripeness ensures the highest nutrient content, flavor and market value levels, thus maximizing economic benefits. Owing to foliage and non-target fruits obstructing target fruits, as well as the alteration in color due to light, there is currently a low recognition rate and missed detection. We take the greenhouse tomato as the object of research. This paper proposes a tomato recognition model based on the improved YOLOv8 architecture to adapt to detecting tomato fruits in complex situations. First, to improve the model's sensitivity to local features, we introduced an LSKA (Large Separable Kernel Attention) attention mechanism to aggregate feature information from different locations for better feature extraction. Secondly, to provide a higher quality upsampling effect, the ultra-lightweight and efficient dynamic upsampler Dysample (an ultra-lightweight and efficient dynamic upsampler) replaced the traditional nearest neighbor interpolation methods, which improves the overall performance of YOLOv8. Subsequently, the Inner-IoU function replaced the original CIoU loss function to hasten bounding box regression and raise model detection performance. Finally, the model test comparison was conducted on the self-built dataset, and the test results show that the mAP0.5 of the YOLOv8-Tomato model reached 99.4% and the recall rate reached 99.0%, which exceeds the original YOLOv8 model detection effect. Compared with faster R-CNN, SSD, YOLOv3-tiny, YOLOv5, and YOLOv8 models, the average accuracy is 7.5%, 11.6%, 8.6%, 3.3%, and 0.6% higher, respectively. This study demonstrates the model's capacity to efficiently and accurately recognize tomatoes in unstructured growing environments, providing a technical reference for automated tomato harvesting. [ABSTRACT FROM AUTHOR]

This paper addresses challenges in the application of existing colters in Chinese ecological tea plantations due to abundant straw roots and insufficient tillage depth. Aligned with the agronomic requirements of hilly eco-tea plantations, our study optimizes the structural advantages of the joint use of rotary tillage blades and double-disc colters to design an efficient trenching device. Our investigation explores the motion characteristics of a double-disc colter during deep trenching operations, in conjunction with rotary tillage blades. Employing discrete element method (DEM) simulations, this paper aims to minimize the working resistance and enhance the tillage depth stability. Single-factor experiments are conducted to determine the impact of key structural parameters on the tillage depth stability and working resistance. The optimal parameters are determined as a relative height of 80 mm to 120 mm, a 280 mm to 320 mm diameter for the double-disc colter, and a 10° to 14° angle between the two discs. The central composite design method is used to optimize the structural parameters of the double-disc colter. The results indicate that when the relative height is 82 mm, the diameter of the double-disc colter is 297 mm, and the angle between the two discs is 14°, the tillage depth stability performance reaches 91.64%. With a working resistance of merely 93.93 N, the trenching device achieves optimal operational performance under these conditions. Field validation testing shows a tillage depth stability coefficient of 92.37% and a working resistance of 104.2 N. These values deviate by 0.73% and 10.93%, respectively, from the simulation results, confirming the reliability of the simulation model. A field validation test further confirms that the operational performance of the colter aligns with the agronomic requirements of ecological tea plantations, offering valuable insights for research on trenching devices in such environments. [ABSTRACT FROM AUTHOR]

The purpose of this study was to address the problem of the poor quality of rotary cutting and soil collection during the process of mechanical ridge building in paddy fields. In order to improve the soil collection rate and decrease the coefficient of variation of soil collection uniformity, the present work mainly combined the advanced rotary-cutting and tillage technology and the rotary-cutting soil collection device, at domestic and international, to study the motion characteristics and distribution situation of soil particles during rotary-cutting and soil collection operations. The test of rotary-cutting soil collection device was simulated by using the EDEM2018 Version: 4.0.0, the accuracy of numerical model was validated by the data of trial test. The results of the single-factor experiment indicated that the working speed level of the rotary blades was 450 r/min to 550 r/min, the operating speed level of the rotary blades was 0.6 km/h to 1.0 km/h, and the tilling depth level of the rotary blades was 180 mm to 200 mm. Moreover, the operating parameter of the rotary-cutting soil collection device were obtained by a multi-factor test, and it was proved that the rotary-cutting soil collection device performed better and the soil collection quality was higher, with a soil collection rate and a coefficient of variation of soil collection uniformity of 87.22% and 6.73%. This study could provide technical support for the research of rotary tillage devices and improve the level of mechanized ridge building in paddy fields. [ABSTRACT FROM AUTHOR]