Search

Chalcogenide perovskites such as BaZrS3 are promising candidates for next generation optoelectronics such as photodetectors and solar cells. Compared to widely studied polycrystalline thin films, single crystals of BaZrS3 with minimal extended and point defects, are ideal platform to study the material's intrinsic transport properties and to make first-generation optoelectronic devices. However, the surface dielectrics formed on BaZrS3 single crystals due to sulfating or oxidation have led to significant challenges to achieving high quality electrical contacts, and hence, realizing the high-performance optoelectronic devices. Here, we report the development of electrical contact fabrication processes on BaZrS3 single crystals, where various processes were employed to address the surface dielectric issue. Moreover, with optimized electrical contacts fabricated through dry etching, high-performance BaZrS3 photoconductive devices with a low dark current of 0.1 nA at 10 V bias and a fast transient photoresponse with rise and decay time of <0.2 s were demonstrated.

Noncollinear ferroic materials are sought after as testbeds to explore the intimate connections between topology and symmetry, which result in electronic, optical and magnetic functionalities not observed in collinear ferroic materials. For example, ferroaxial materials have ordered rotational structural distortions that break mirror symmetry and induce chirality. When ferroaxial order is coupled with ferroelectricity arising from a broken inversion symmetry, it offers the prospect of electric-field-control of the ferroaxial distortions and opens up new tunable functionalities. However, chiral ferroelectrics, especially ones stable at room temperature, are rare. We report the discovery of a strain-stabilized, room-temperature chiral ferroelectric phase in single crystals of BaTiS$_3$, a quasi-one-dimensional (1D) hexagonal chalcogenide. Using first-principles calculations, we predict the stabilization of this multiferroic phase having $P6_3$ space group for biaxial tensile strains exceeding 1.5% applied on the basal ab-plane of the room temperature $P6_3cm$ phase of BaTiS$_3$. The chiral ferroelectric phase is characterized by rotational distortions of select TiS$_6$ octahedra around the long $c$-axis and polar displacement of Ti atoms along the $c$-axis. We used an innovative approach using focused ion beam milling to make appropriately strained samples of BaTiS$_3$. The ferroaxial and ferroelectric distortions, and their domains in $P6_3$-BaTiS$_3$ were directly resolved using atomic resolution scanning transmission electron microscopy. Landau-based phenomenological modeling predicts a strong coupling between the ferroelectric and the ferroaxial order making $P6_3$-BaTiS$_3$ an attractive test bed for achieving electric-field control of chirality-related phenomena such as circular photo-galvanic current and the Rashba effect., Comment: 19 pages, 4 figures

Topological defects, such as vortices and skyrmions in magnetic and dipolar systems, can give rise to properties that are not observed in typical magnets or dielectrics. Here, we report the discovery of an atomic-scale dipolar vortex lattice in the charge-density-wave (CDW) phase of BaTiS3, a quasi-one-dimensional (quasi-1D) hexagonal chalcogenide, using X-ray synchrotron single-crystal diffraction studies. The vortex lattice consists of a periodic array of vortex-vortex-antivortex patterns composed of electric dipoles from off-center displacements of octahedrally coordinated Ti atoms. Using first-principles calculations and phenomenological modeling, we show that the dipolar vortex lattice in BaTiS3 arises from the coupling between multiple lattice instabilities arising from flat, soft phonon bands. This mechanism contrasts with classical dipolar textures in ferroelectric heterostructures that emerge from the competition between electrostatic and strain energies, and necessitate a dimensional reduction in the form of thin films and heterostructures to stabilize the textures. The observation of dipolar vortices in BaTiS3 brings the ultimate scaling limit for dipolar topologies down to about a nanometer and unveils the intimate connection between crystal symmetry and real-space topology. Our work sets up zero-filling triangular lattice materials with instabilities as a playground for realizing and understanding quantum polarization topologies.

Hydrogen has been identified as a clean, zero carbon, sustainable, and promising energy source for the future, and electrochemical water splitting for hydrogen production is an emission-free, efficient energy conversion technology. A major limitation of this approach is the unavailability of efficient, abundant, inexpensive catalysts, which prompts the need for new catalytic materials. Here, we report the synthesis and electrocatalytic properties of a novel transition metal-based ternary chalcogenide family, LaMS$_3$ (M = Mn, Fe, Co, Ni). Powder X-ray diffraction confirms the phase purity of these materials, while composition analysis using energy dispersive spectroscopy (EDS) confirms the presence of the stoichiometric ratio of elements in these compounds. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were used to study the chemical states on the surface and in bulk, respectively. These materials exhibit bifunctional catalytic activity towards the two half-reactions of the water-splitting process, with LaNiS$_3$ being the most active material for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The LaMS$_3$ compounds show long-term stability with negligible change in the overpotential at a constant current density of 10 mA cm$^{-2}$ over 18 hours of measurements. As compared to the corresponding ternary oxides, the LaMS$_3$ materials exhibit higher activity and significantly lower Tafel slopes. The ability to catalyze both half-reactions of water electrolysis makes these materials promising candidates for bifunctional catalysts and presents a new avenue to search for high-efficiency electrocatalysts for water splitting.

BaTiS3, a quasi-1D complex chalcogenide, has gathered considerable scientific and technological interest due to its giant optical anisotropy and electronic phase transitions. However, the synthesis of high-quality BaTiS3 crystals, particularly those featuring crystal sizes of millimeters or larger, remains a challenge. Here, we investigate the growth of BaTiS3 crystals utilizing a molten salt flux of either potassium iodide, or a mixture of barium chloride and barium iodide. The crystals obtained through this method exhibit a substantial increase in volume compared to those synthesized via the chemical vapor transport method, while preserving their intrinsic optical and electronic properties. Our flux growth method provides a promising route towards the production of high-quality, large-scale single crystals of BaTiS3, which will greatly facilitate advanced characterizations of BaTiS3 and its practical applications that require large crystal dimensions. Additionally, our approach offers an alternative synthetic route for other emerging complex chalcogenides.

Polarimetric infrared detection bolsters IR thermography by leveraging the polarization of light. Optical anisotropy, i.e., birefringence and dichroism, can be leveraged to achieve polarimetric detection. Recently, giant optical anisotropy was discovered in quasi-1D narrow-bandgap hexagonal perovskite sulfides, A1+xTiS3, specifically BaTiS3[1,2] and Sr9/8TiS3[3,4]. In these materials, the critical role of atomic-scale structure modulations[4,5] in the unconventional electrical[5,6], optical[7,8], and thermal[7,9] properties raises the broader question of other materials that belong to this family. To address this issue, for the first time, we synthesized high-quality single crystals of a largely unexplored member of the A1+xTiX3 (X = S, Se) family, BaTiSe3. Single-crystal X-ray diffraction determined the room-temperature structure with the P31c space group, which is a superstructure of the earlier reported[10] P63/mmc structure. The crystal structure of BaTiSe3 features antiparallel c-axis displacements similar to BaTiS3,[2] but is of lower symmetry. Polarization-resolved Raman and Fourier transform infrared (FTIR) spectroscopy were used to characterize the optical anisotropy of BaTiSe3, whose refractive index along the ordinary (perpendicular to c) and extraordinary (parallel to c) optical axes was quantitatively determined by combining ellipsometry studies with FTIR. With a giant birefringence {\Delta}n~0.9, BaTiSe3 emerges as a new candidate for miniaturized birefringent optics for mid-wave infrared to long-wave infrared imaging.

Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded single crystals in which heat transport is impeded by other means. Here, we report intrinsic, glass-like, ultralow thermal conductivity and ultrahigh elastic-modulus/thermal-conductivity ratio in single-crystalline Ruddlesden-Popper Ban+1ZrnS3n+1, n = 2,3, which are derivatives of BaZrS3. Their key features are strong anharmonicity and intra-unit-cell rock-salt blocks. The latter produce strongly bonded intrinsic superlattices, impeding heat conduction by broadband reduction of phonon velocities and mean free paths and concomitant strong phonon localization. The present study initiates a paradigm of mechanically stiff phonon glasses.

Structural disorder has been shown to enhance and modulate magnetic, electrical, dipolar, electrochemical, and mechanical properties of materials. However, the possibility of obtaining novel optical and optoelectronic properties from structural disorder remains an open question. Here, we show unambiguous evidence of disorder in the form of anisotropic, picoscale atomic displacements modulating the refractive index tensor and resulting in the giant optical anisotropy observed in BaTiS$_3$, a quasi-one-dimensional hexagonal chalcogenide. Single crystal X-ray diffraction studies reveal the presence of antipolar displacements of Ti atoms within adjacent TiS$_6$ chains along the c-axis, and three-fold degenerate Ti displacements in the a-b plane. $^{47/49}$Ti solid-state NMR provides additional evidence for those Ti displacements in the form of a three-horned NMR lineshape resulting from a low symmetry local environment around Ti atoms. We used scanning transmission electron microscopy to directly observe the globally disordered Ti a-b plane displacements and find them to be ordered locally over a few unit cells. First-principles calculations show that the Ti a-b plane displacements selectively reduce the refractive index along the ab-plane, while having minimal impact on the refractive index along the chain direction, thus resulting in a giant enhancement in the optical anisotropy. By showing a strong connection between structural disorder with picoscale displacements and the optical response in BaTiS$_3$, this study opens a pathway for designing optical materials with high refractive index and functionalities such as large optical anisotropy and nonlinearity., Comment: 24 pages, 3 figures

Chalcogenide perovskites, such as BaZrS$_3$, are emerging semiconductors with potential for high photovoltaic power conversion efficiency. The role of defects in the efficiency of the generation and collection of photo-excited carriers has not been experimentally investigated extensively. We study the effect of processing-induced defects on the photoconductive properties of single crystals of BaZrS$_3$. We achieved ohmic contacts to single crystals of BaZrS$_3$ and observed positive surface photovoltage, which is typically observed in p-type semiconductors. However, mechanical polishing of BaZrS$_3$ to remove the surface oxide leads to dense deformation grain boundaries and leads to trap-dominated photoconductive response. In comparison, ohmic contacts achieved in cleaved crystals leave fewer deformation defects and greatly improve optoelectronic properties. Defect-controlled crystal growth and contact fabrication are potentially limiting factors for achieving high photon-to-excited electron conversion efficiency in BaZrS$_3$.

In 2002, M.Ram Murty showed that if p is a prime with k-adic expansion :$p = \sum_{i = 0}^n a_i k^i$ , then the polynomial $f(x) = \sum_{i = 0}^n a_ix^i$ is irreducible in $\mathbb{Z}[x]$.When $k = 10$ , it's a result of A.Cohn. I think this kind of polynomials is really interesting and worse to speak more. So I plan to find more conclusions about this kind of polynomials. In the first section of this article, author proves a stronger version of this theorem that if we multiply prime $p$ by a factor $t$ that is smaller than $k$ ,the conclusion also holds. In the second section, author further consider larger multiplier $t$ ,and gives a technique to control one of the factors of the polynomial.

Electron-lattice coupling effects in low dimensional materials give rise to charge density wave (CDW) order and phase transitions. These phenomena are critical ingredients for superconductivity and predominantly occur in metallic model systems such as doped cuprates, transition metal dichalcogenides, and more recently, in Kagome lattice materials. However, CDW in semiconducting systems, specifically at the limit of low carrier concentration region, is uncommon. Here, we combine electrical transport, synchrotron X-ray diffraction and optical spectroscopy to discover CDW order in a quasi-one-dimensional (1D), dilute d-band semiconductor, BaTiS3, which suggests the existence of strong electron-phonon coupling. The CDW state further undergoes an unusual transition featuring a sharp increase in carrier mobility. Our work establishes BaTiS3 as a unique platform to study the CDW physics in the dilute filling limit to explore novel electronic phases.

Low-dimensional materials with chain-like (one-dimensional) or layered (twodimensional) structures are of significant interest due to their anisotropic electrical, optical, thermal properties. One material with chain-like structure, BaTiS3 (BTS), was recently shown to possess giant in-plane optical anisotropy and glass-like thermal conductivity. To understand the origin of these effects, it is necessary to fully characterize the optical, thermal, and electronic anisotropy of BTS. To this end, BTS crystals with different orientations (aand c-axis orientations) were grown by chemical vapor transport. X-ray absorption spectroscopy (XAS) was used to characterize the local structure and electronic anisotropy of BTS. Fourier transform infrared (FTIR) reflection/transmission spectra show a large inplane optical anisotropy in the a-oriented crystals, while the c-axis oriented crystals were nearly isotropic in-plane. BTS platelet crystals are promising uniaxial materials for IR optics with their optic axis parallel to the c-axis. The thermal conductivity measurements revealed a thermal anisotropy of ~4.5 between the c- and a-axis. Time-domain Brillouin scattering showed that the longitudinal sound speed along the two axes is nearly the same suggesting that the thermal anisotropy is a result of different phonon scattering rates.

Chalcogenide perovskites have emerged as a new class of electronic materials, but fundamental properties and applications of chalcogenide perovskites remain limited by the lack of high quality epitaxial thin films. We report epitaxial thin film growth of BaZrS3, a prototypical chalcogenide, by pulsed laser deposition. X-ray diffraction studies show that the films are strongly textured out of plane and have a clear in-plane epitaxial relationship with the substrate. Electron microscopy studies confirm the presence of epitaxy for the first few layers of the film at the interface, even though away from the interface the films are polycrystalline with a large number of extended defects suggesting the potential for further improvement in growth. X-Ray reflectivity and atomic force microscopy show smooth film surfaces and interfaces between the substrate and the film. The films show strong light absorption near the band edge and photoluminescence in the visible region. The photodetector devices show fast and efficient photo response with the highest ON/OFF ratio reported for BaZrS3 films thus far. Our study opens up opportunities to realize epitaxial thin films, heterostructures, and superlattices of chalcogenide perovskites to probe fundamental physical phenomena and the resultant electronic and photonic device technologies.

There are few known semiconductors exhibiting both strong optical response and large dielectric polarizability. Inorganic materials with large dielectric polarizability tend to be wide-band gap complex oxides. Semiconductors with strong photoresponse to visible and infrared light tend to be weakly polarizable. Interesting exceptions to these trends are halide perovskites and phase-change chalcogenides. Here we introduce complex chalcogenides in the Ba-Zr-S system in perovskite and Ruddlesden-Popper structures as a new family of highly polarizable semiconductors. We report the results of impedance spectroscopy on single crystals that establish BaZrS3 and Ba3Zr2S7 as semiconductors with low-frequency relative dielectric constant (${\epsilon}_0$) in the range 50 - 100, and band gap in the range 1.3 - 1.8 eV. Our electronic structure calculations indicate the enhanced dielectric response in perovskite BaZrS3 versus Ruddlesden-Popper Ba3Zr2S7 is primarily due to enhanced IR mode-effective charges, and variations in phonon frequencies along $\langle 001 \rangle$; differences in the Born effective charges and the lattice stiffness are of secondary importance. This combination of covalent bonding in crystal structures more common to complex oxides results in a sizable Fr\"ohlich coupling constant, which suggests that charge carriers are large polarons., Comment: 22 pages, 5 figures

We investigate the variation of the band gap across the Ruddlesden-Popper (RP) series (An+1BnX3n+1) in model chalcogenide, oxide, and halide materials to understand the factors influencing band gap evolution. In contrast to the oxides and halides, we find the band gap of the chalcogenides evolve differently with the thickness of the perovskite blocks in these natural superlattices. We show that octahedral rotations (i.e. deviation of the B-X-B bond angles from 180) and quantum confinement effects compete to decide the band gap evolution of RP phases. The insights gained here will allow us to rationally design layered perovskite phases for electronics and optoelectronics.

Perovskite chalcogenides are gaining substantial interest as an emerging class of semiconductors for optoelectronic applications. High quality samples are of vital importance to examine their inherent physical properties. We report the successful crystal growth of the model system, BaZrS$_3$ and its Ruddlesden-Popper phase Ba$_3$Zr$_2$S$_7$ by flux method. X-ray diffraction analyses showed space group of $Pnma$ with lattice constants of $a$ = 7.056(3) \AA\/, $b$ = 9.962(4) \AA\/, $c$ = 6.996(3) \AA\/ for BaZrS$_3$ and $P4_2/mnm$ with $a$ = 7.071(2) \AA\/, $b$ = 7.071(2) \AA\/, $c$ = 25.418(5) \AA\/ for Ba$_3$Zr$_2$S$_7$. Rocking curves with full-width-at-half-maximum of 0.011$^\circ$ for BaZrS$_3$ and 0.027$^\circ$ for Ba$_3$Zr$_2$S$_7$ were observed. Pole figure analysis, scanning transmission electron microscopy images and electron diffraction patterns also establish high quality of grown crystals. The octahedra tilting in the corner-sharing octahedra network are analyzed by extracting the torsion angles., Comment: 4 Figures, 2 Tables

Neuro-inspired computing architectures are one of the leading candidates to solve complex, large-scale associative learning problems. The two key building blocks for neuromorphic computing are the synapse and the neuron, which form the distributed computing and memory units. Solid state implementations of these units remain an active area of research. Specifically, voltage or current controlled oscillators are considered a minimal representation of neurons for hardware implementations. Such oscillators should demonstrate synchronization and coupling dynamics for demonstrating collective learning behavior, besides the desirable individual characteristics such as scaling, power, and performance. To this end, we propose the use of nanoscale, epitaxial heterostructures of phase change oxides and oxides with metallic conductivity as a fundamental unit of an ultralow power, tunable electrical oscillator capable of operating in the microwave regime. Our simulations show that optimized heterostructure design with low thermal boundary resistance can result in operation frequency of up to 3 GHz and power consumption as low as 15 fJ/cycle with rich coupling dynamics between the oscillators.

Transition metal perovskite chalcogenides, a class of materials with rich tunability in functionalities, are gaining increased attention as candidate materials for renewable energy applications. Perovskite oxides are considered excellent n-type thermoelectric materials. Compared to oxide counterparts, we expect the chalcogenides to possess more favorable thermoelectric properties such as lower lattice thermal conductivity and smaller band gap, making them promising material candidates for high temperature thermoelectrics. Thus, it is necessary to study the thermal properties of these materials in detail, especially thermal stability, to evaluate their potential. In this work, we report the synthesis and thermal stability study of five compounds, \alpha-SrZrS$_3$, \beta-SrZrS$_3$, BaZrS$_3$, Ba$_2$ZrS$_4$, and Ba$_3$Zr$_2$S$_7$. These materials cover several structural types including distorted perovskite, needle-like, and Ruddlesden-Popper phases. Differential scanning calorimeter and thermo-gravimetric analysis measurements were performed up to 1200{\deg}C in air. Structural and chemical characterizations such as X-ray diffraction, Raman spectroscopy, and energy dispersive analytical X-ray spectroscopy were performed on all the samples before and after the heat treatment to understand the oxidation process. Our studies show that perovskite chalcogenides possess excellent thermal stability in air at least up to 600{\deg}C., Comment: 9 Figures

Mid-wave infrared (IR) and long-wave IR spectral ranges are of growing interest in various applications such as thermal imaging, thermography-based remote sensing, and night vision. Materials widely used for IR photodetectors in this regime include cadmium mercury telluride alloys and nanostructures of compound semiconductor. The materials development for IR optics will drive down the cost of IR optical systems and enable larger scale deployment. Here, we report a mid-wave IR responsive material composed of earth abundant and non-toxic elements, Sr1+xTiS3. It has a highly anisotropic quasi-one-dimensional structure similar to hexagonal perovskites. We grew large, high quality single crystals and studied its anisotropic optical properties. We observed two distinct optical absorption edges at ~2.5 um and ~5 um, respectively, for linear polarizations along two principal axes. The material demonstrated strong and broadband linear dichroism spanning mid-wave IR and long-wave IR, with a dichroitic ratio of up to 22., Comment: 4 Figures