Search

Pesticide compounding technology for disease and pest control emerges as an effective way to increase the effectiveness of pesticides while reducing pesticides resistance. Nanomaterials and encapsulation technology have offered a new insight into preparing efficient pesticide formulations, especially constructing a co-delivery nanoparticle for synergistic pesticides. In this study, a dinotefuran/avermectin co-delivery nanoparticles (DACNPs) against pear tree pests with polylactic acid (PLA) as the wall material were constructed by double-emulsion method combined with high-pressure homogenization technique. The drug content of the DACNPs was 39.1% with an average size of 245.7 ± 4.2 nm and the mean polymer dispersity index (PDI) value was 0.123. The DACNPs showed high foliar retention and good spread performance on target leaves due to the nanoscale effect. The obtained DACNPs showed a better control effect on Grapholitha molesta Busck and Psylla chinensis Yang et Li compared with the commercial formulations, which could significantly prolong the effective duration and enhance the bioactivity with lower amounts and application frequency of pesticides. This study may provide new insights into developing novel pesticide formulations to improve the utilization rate of pesticides, reduce environmental pollution and minimize the cost of farming.

Pesticides play an important role in agricultural disease and pest control. However, the low utilization efficiency and environmentally unfriendly disadvantages of conventional pesticide formulations cause substantial environmental and ecological damage. Constructing intelligent controlled-release pesticide systems

Pesticides are commonly used in modern agriculture and are important for global food security. However, postapplication losses due to degradation, photolysis, evaporation, leaching, surface runoff, and other processes may substantially reduce their efficacy. Controlled-release formulations can achieve the permeation-regulated transfer of an active ingredient from a reservoir to a target surface. Thus, they can maintain an active ingredient at a predetermined concentration for a specified period. This can reduce degradation and dissipation and other losses and has the potential to improve efficacy. Recent developments in controlled-release technology have adapted the concepts of intelligence and precision from the pharmaceutical industry. In this review, we present recent advances in the development of controlled-release formulations and discuss details of the preparation methods, material improvements, and application technologies.

Pesticides play an important role in pest control. However, they can be limited due to low utilization efficiency, causing substantial losses to the environment and ecological damage. Nanotechnology is an active area of research regarding encapsulation of pesticides for sustainable pest control. Here, we developed intelligent formulations of avermectin (Av) quaternary ammonium chitosan surfactant (QACS) nanocapsules (

Pesticides play a very important role in pest control and plant protection. However, they can be limited by a tendency to cause ecological system damage due to significant losses into the environment. To increase pesticide utilization efficiency, we developed highly leaf-adhesive avermectin nanocapsules (Av-pH-cat@CS) with pH-responsive controlled release properties. The Av-pH-cat@CS nanocapsules displayed good thermal stability and photostability in response to UV light irradiation. The Av-pH-cat@CS nanocapsules could be disrupted at low pH and they exhibited excellent controlled release in response to pH, which improved the release of avermectins. In addition, the Av-pH-cat@CS nanocapsules were highly adhesive to crop leaves as a result of strong hydrogen bonding, which prolonged the retention time on crop leaves. The Av-pH-cat@CS nanocapsules with pH-responsive release and strong leaf adhesion improved the control efficacy and enhanced the utilization efficiency. Our findings offer a promising approach to prolonging pesticide duration on crop leaves and improving the utilization efficiency.

Emamectin benzoate (EMB), a frequently used biopesticide, is poorly soluble in water, making it difficult to wet the leaf surface, is prone to degrade in sunlight and readily loses its bioactivity. Traditional methods such as organic solvent application, pH adjustment and addition of photoprotectants either increase the economic and environmental costs or barely achieve the desired goal. We hypothesized that nanotechnology could improve the solubility, foliar affinity, photostability and bioactivity of EMB. This research set out to prepare a nano-EMB solid powder (nano-EMB-SP) and test this hypothesis.Nano-EMB-SP was prepared using a self-emulsifying method combined with carrier solidification. The mean particle size and Polydispersity index (PDI) of nano-EMB-SP were 14.64 nm and 0.24, respectively. A scanning electron microscopy image showed that EMB nanoparticles were mainly spherical or ellipsoidal in shape. Without organic solvent, the aqueous solubility of EMB in nano-EMB-SP was 4500 mg LNano-EMB-SP is an eco-friendly and efficient way to improve the solubility, foliar affinity, photostability and bioactivity of EMB. This research provides a good approach to improving the efficacy of poorly soluble and UV-sensitive pesticides. © 2022 Society of Chemical Industry.

Poorly water-soluble pesticide compounds are difficult to be formulated as environmentally friendly formulations with high efficacy. For the conventional formulations, more than 50% of pesticides are lost during application due to the decomposition of active ingredient, dust drift and running off. Therefore, there is an urgent need to construct a novel formulation for improving the bioavailability of pesticides. The avermectin B2 solid nanodispersion was developed by self-emulsifying and solidification technology. The average particle size, surface tension and contact angle on cabbage leaves of the solid nanodispersion were 35.3 nm, 36.6 mN/m and 58°, respectively. The toxicities of the nanoformulation against diamondback moths and root-knot nematode were more than 1.7 times that of conventional emulsion in water and water dispersible granule. This investigation demonstrated that for foliage-applied pesticides, the formulation bioavailability had positive correlation with wettability which was negatively correlated with surface tension and contact angle. This study provides an easy and scalable technique to construct the effective and environmentally friendly nanoformulations. The toxicity improvement of the solid nanodispersion will significantly reduce dosage and environmental pollution of pesticide. The clarified relationship between formulation parameters and biological activity will contribute to the design and construction of novel pesticide formulations.

Nanotechnology could greatly improve global agricultural food production. Chlorantraniliprole and lambda cyhalothrin double-loaded nano-microcapsules were fabricated to enhance the control of pests by pesticides and improve the pesticide utilization efficiency. The nano-microcapsules were synthesized using a method involving the solid in oil in water encapsulation technique and solvent evaporation. The nano-microcapsules slowly and simultaneously released lambda cyhalothrin and chlorantraniliprole. The cumulative lambda cyhalothrin and chlorantraniliprole release rates at 40 h were 80% and 70%, respectively. Indoor Spodoptera frugiperda control tests indicated that the double-loaded nano-microcapsules were more toxic than lambda cyhalothrin water-dispersible granules, chlorantraniliprole water-dispersible granules, and a mixture of lambda cyhalothrin water-dispersible granules and chlorantraniliprole water-dispersible granules, indicating that the pesticides in the nano-microcapsules synergistically controlled Spodoptera frugiperda. The results indicated that pesticide nano-microcapsules with synergistic effects can be developed that can improve the effective pesticide utilization efficiency and pesticide bioavailability. This is a new idea for achieving environmentally intelligent pesticide delivery.

Vectors and carriers play an indispensable role in gene therapy and drug delivery. Non-viral vectors are widely developed and applied in clinical practice due to their low immunogenicity, good biocompatibility, easy synthesis and modification, and low cost of production. This review summarized a variety of non-viral vectors and carriers including polymers, liposomes, gold nanoparticles, mesoporous silica nanoparticles and carbon nanotubes from the aspects of physicochemical characteristics, synthesis methods, functional modifications, and research applications. Notably, non-viral vectors can enhance the absorption of cargos, prolong the circulation time, improve therapeutic effects, and provide targeted delivery. Additional studies focused on recent innovation of novel synthesis techniques for vector materials. We also elaborated on the problems and future research directions in the development of non-viral vectors, which provided a theoretical basis for their broad applications.

Poor utilization efficiency of conventional pesticide formulation has resulted in overuse, which could increase costs, toxicity to other non-target organisms, concerns about human health and safety, groundwater contamination, causing ecosystem destruction and food pollution. The folia-adhesive formulation is supposed to enhance foliar retention time and utilization efficiency. According to the microstructure of the foliage, the nanopesticides surfaces were modified by affinity groups to improve folia adhesion and decrease the loss from crop foliage. In this study, tannic acid, a bioadhesive natural molecule, has been applied to develop abamectin nanopesticide (Abam-PLA-Tannin-NS) and azoxystrobin nanopesticide (Azox-PLA-Tannin-NS) with strong adhesion to foliage by chemical modification. Abam-PLA-Tannin-NS and Azox-PLA-Tannin-NS presented better photostability and continuous release behavior. The retention rates of Abam-PLA-Tannin-NS and Azox-PLA-Tannin-NS on the foliage was remarkably enhanced by more than 50%, compared with unmodified nanopesticides. Resultantly, the indoor toxicity of Abam-PLA-Tannin-NS and antifungal activity of Azox-PLA-Tannin-NS were enhanced. The interaction force between tannic acid coating nanoparticles and foliage was mainly from hydrogen bonding. Our findings could be beneficial to develop novel leaf-adhesive nanopesticides with high retention time and bioavailability.

Background Safe and efficient nanopesticides for pest control have attracted attention because of their ability to enhance target efficiency and reduce undesirable side effects. Nanoformulations have a significant role in solving the problem of water solubility for insoluble drugs. However, there are few studies on the physicochemical properties and biological activities of pesticides of different particle sizes and remains unclear how these key physicochemical properties are affected by particle size. In this study, a series of glucose-loaded lambda-cyhalothrin nanoparticles (LCNs) with a tunable size were developed via shearing emulsification and carrier loading in order to evaluate insecticidal action. Results The mean particle sizes of the LCNs were 50.6, 115.2 and 221 nm. The wettability, dispersibility and stability of nanoparticles were particle size-dependent, and were mainly determined by particle size and the uniformity of distribution. Furthermore, the insecticidal activity of LCNs was inversely proportional to the particle size. Conclusion This study not only provides a facile technology for the preparation of nanopesticides with a tunable particle size, but also clarifies the effect of particle size on the performance of pesticides. © 2020 Society of Chemical Industry.

The effective utilization of many conventional pesticide formulations is less than 30%, which can increase the environmental impact of these substances. This degree of waste could be reduced by improving the adhesion of pesticides to foliage. In the present work, a complex comprising tannic acid (TA) and Fe3+ ions was used to encapsulate azoxystrobin and avermectin water dispersible granule (WDG) formulations (termed Az-WDG-TA and Av-WDG-TA) to improve adhesion. The treated pesticides exhibited improved photostability as well as sustained continuous release behavior. The retention proportions of the Az-WDG-TA and Av-WDG-TA on cucumber and lettuce foliage were improved by more than 50%. The ability of solutions of these materials to wet foliage was also enhanced after coating, such that the toxicity of Av-WDG-TA to aphids and the antifungal activity of Az-WDG-TA to Fusarium oxysporum were increased by nearly 50%. Given the low cost of TA and Fe3+ compounds and the simple synthesis process, this method represents a promising means of producing foliage-adhesive pesticide formulations with increased retention and bioavailability.

Poorly water-soluble pesticide compounds are difficult to be formulated as environmentally friendly formulations with high efficacy. For the conventional formulations, more than 50% of pesticides are lost during application due to the decomposition of active ingredient, dust drift and running off. Therefore, there is an urgent need to construct a novel formulation for improving the bioavailability of pesticides. The avermectin B2 solid nanodispersion was developed by self-emulsifying and solidification technology. The average particle size, surface tension and contact angle on cabbage leaves of the solid nanodispersion were 35.3 nm, 36.6 mN/m and 58°, respectively. The toxicities of the nanoformulation against diamondback moths and root-knot nematode were more than 1.7 times that of conventional emulsion in water and water dispersible granule. This investigation demonstrated that for foliage-applied pesticides, the formulation bioavailability had positive correlation with wettability which was negatively correlated with surface tension and contact angle. This study provides an easy and scalable technique to construct the effective and environmentally friendly nanoformulations. The toxicity improvement of the solid nanodispersion will significantly reduce dosage and environmental pollution of pesticide. The clarified relationship between formulation parameters and biological activity will contribute to the design and construction of novel pesticide formulations.

The prevention and control of pests and diseases are becoming increasingly difficult owing to extensive pesticide resistance. The synergistic use of pesticides for disease control is an effective way of slowing pesticide resistance, reducing the number of pesticide applications, and protecting the environment. In this study, a dual-functionalized pesticide nanocapsule delivery system loaded with two active ingredients (AIs)&mdash, validamycin and thifluzamide&mdash, was developed to prevent and control rice sheath blight, the nanocapsule system was based on a water&ndash, oil&ndash, water double emulsion method combined with high-pressure homogenization technology. Our results showed that the dual-functionalized pesticide nanocapsules were monodisperse spheres with a mean particle size of ~260 nm and had good storage stability. Compared with commercial formulations, the dual-functionalized pesticide nanocapsules exhibited good foliar spread owing to their small size, which is beneficial for reducing the loss of pesticides on the leaves. The 50% median effect concentration and synergistic ratio against Rhizoctonia solani of the dual-functionalized pesticide nanocapsules and commercial formulation were 0.0082 and 0.0350 &mu, g/mL, and 2.088 and 0.917, respectively. These findings indicate that the bioactivity of the dual-functionalized system was significantly better than that of the commercial formulations and that the dual-functionalized system demonstrated a clear synergistic effect between the two AIs. The system presented here is simple, fast, and capable of dual-pesticide loading with significant synergistic effects. Our findings could help to facilitate the improvement of pesticides efficiency and the slowing of pesticide resistance.

Background Pesticide is an important agricultural necessity to control plant diseases and pests, ensuring safe production of food. However, the low efficacy, large dosage and high-frequency use of conventional pesticide formulation seriously induced food safety and ecological environment issues. In this research, lambda-cyhalothrin solid nanodispersion (LCSND) was developed by a self-dispersing method. Results The mean particle size of the lambda-cyhalothrin solid nanodispersion was 32.7 ± 1.1 nm. It exhibited excellent dispersibility, wettability and stability, especially the improved bioavailability compared to the commercial formulations. Notably, the solid nanodisperison had a small particle size and large specific surface area. The solid nanodispersion without organic solvents can minimize the environment pollution and overcome the instability characteristic of the liquid formulations. Conclusion Therefore, lambda-cyhalothrin solid nanodispersion has broad application prospects in agricultural production and environmental protection. © 2018 Society of Chemical Industry.

Background The development of efficient and safe green pesticides is a scientific strategy to alleviate current pesticide residues, environmental pollution, and threats to non-target organisms. Pesticide controlled-release formulations (CRFs) have attracted wide attention because they can control the rate of release of active ingredients and prolong the effective duration. In particular, nanoscale pesticide sustained-release systems have excellent biological activity and distribution performance because of their small particle size. Some technical difficulties remain in obtaining nanoscale CRFs. Results We successfully fabricated pyraclostrobin nanosphere CRF by combining high-pressure homogenization technology and emulsion-solvent evaporation methods. The pyraclostrobin nanospheres had a uniform spherical shape with a mean particle size of 450 nm and polydispersity index of less than 0.3. The pyraclostrobin loading capacity reached 53.6%, with excellent storage stability. The contact angle of nanospheres on cucumber leaf surfaces demonstrated that it had good wettability. Compared with pyraclostrobin technical and commercial formulations, the nanosphere systems showed a significantly sustained release of pyraclostrobin for longer (up to 250 h). A preliminary bioassay against Penicillium ochrochloron showed that the bioactivity and long-term efficiency of pyraclostrobin nanospheres were superior to those of the commercial formulation. Conclusion This research introduced a simple, fast, expandable method for preparing pyraclostrobin nanospheres. The results showed that pyraclostrobin nanospheres could prolong the duration of pesticide efficacy and enhance bioactivity. Furthermore, this technology provides a platform for scale-up production of nano-scale pesticide CRFs. © 2020 Society of Chemical Industry.

To improve the bioavailability of the poorly water-soluble fungicide, an azoxystrobin nanosuspension was prepared by the wet media milling method. Due to their reduced mean particle size and polydispersity index, 1-Dodecanesulfonic acid sodium salt and polyvinylpyrrolidone K30 were selected from six conventional surfactants, the content only accounting for 15% of the active compound. The mean particle size, polydispersity index, and $$\zeta$$ ζ potential of the nanosuspension were determined to be 238.1 ± 1.5 nm, 0.17 ± 0.02 and − 31.8 ± 0.3 mV, respectively. The lyophilized nanosuspension mainly retained crystalline state, with only a little amorphous content as determined by powder X-ray diffraction. Compared to conventional fungicide formulations, the nanosuspension presented an increased retention volume and a reduced contact angle, indicating enhanced wettability and adhesion. In addition, the azoxystrobin nanosuspension showed the highest antifungal activity, with a medial lethal concentration of 1.4243 μg/mL against Fusarium oxysporum. In optical micrographs, hyphal deformations of thinner and intertwined hyphae were detected in the exposed group. Compared to the control group, the total soluble protein content, superoxide dismutase, and catalase activities were initially increased and then decreased with prolonged exposure time. The azoxystrobin nanosuspension reduced the defensive antioxidant capability of Fusarium oxysporum and resulted in the generation of excessive reactive oxygen species. This study provides a novel method for preparing nanosuspension formulation of poorly soluble antifungal agents to enhance the biological activity and decrease the negative environmental impact.

Current methods of transgenic animal production suffer from low efficiency, cumbersome operation, and high cost. Magnetic nanoparticles (MagNPs) have several characteristics, such as a high carrying efficiency, non-immunogenicity, and strong targeting inducible via magnetic fields, that make them well-suited for use in the generation of transgenic animals. In this study, we used magnetic nano-carriers combined with sperm-mediated gene transfer (SMGT) to generate transgenic mice that harbor the enhanced green fluorescent protein (EGFP) gene. Exogenous plasmid DNA loaded onto Fe3O4 MagNPs were first delivered into mouse sperm cells under a magnetic field. Transfected sperm cells were then incubated with oocytes to complete fertilization, and transgenic mice were successfully generated though embryo transplantation. We demonstrate that this method is exceedingly facile, fast, and cost-effective, with higher transfection efficiency than that of conventional liposome methods.

Genetic modification plays a vital role in breeding new crops with excellent traits. Almost all the current genetic modification methods require regeneration from tissue culture, involving complicated, long and laborious processes. In particular, many crop species such as cotton are difficult to regenerate. Here, we report a novel transformation platform technology, pollen magnetofection, to directly produce transgenic seeds without regeneration. In this system, exogenous DNA loaded with magnetic nanoparticles was delivered into pollen in the presence of a magnetic field. Through pollination with magnetofected pollen, transgenic plants were successfully generated from transformed seeds. Exogenous DNA was successfully integrated into the genome, effectively expressed and stably inherited in the offspring. Our system is culture-free and genotype independent. In addition, it is simple, fast and capable of multi-gene transformation. We envision that pollen magnetofection can transform almost all crops, greatly facilitating breeding processes of new varieties of transgenic crops.

Pesticides are chemical or biological substances to control pests and protect the crop yield. Most pesticides suffering from large amounts of losses in the environment lead to damage of ecological systems and food pollution. To reduce their losses and increase the utilization rate, we have developed bioinspired mussel avermectin nanoparticles [P(St-MAA)-Av-Cat] with strong adhesion to crop foliage by the emulsion-solvent evaporation method and chemical modification. They were near spheres with a diameter of around 120 nm. They displayed remarkable high avermectin content of more than 50% (w/w) and presented excellent storage stability as well as continuous sustained release. The photosensitive avermectins loaded were highly improved against ultraviolet light. Meanwhile, the retention rate of P(St-MAA)-Av-Cat on the crop foliage surfaces was significantly increased. As a result, the indoor toxicity of P(St-MAA)-Av-Cat was highly enhanced. The adhesive property strongly depended upon the functional groups on the nanoparticle surface. The multimodal binding mode of P(St-MAA)-Av-Cat to the crop foliage surface resulted in stronger adhesion and a longer retention time.

Pesticides are important to defend against biological disasters and ensure food security. Most conventional pesticide formulations suffer from heavy losses to the surrounding environment and low effective utilization rate, leading to the pollution of ecological systems and food because of their weak adhesion to crop foliage. To increase both the adhesion to foliage and effective utilization rate of pesticides, we developed three types of functionalized abamectin poly(lactic acid) (Abam-PLA) nanoparticles (CH3CO-PLA-NS, HOOC-PLA-NS and H2N-PLA-NS) with different adhesion abilities to cucumber foliage. The Abam-PLA nanoparticles were spherical with diameters of around 450 nm, and their maximum abamectin loading rate was around 50%. The nanoparticles exhibited better continuous release behavior and photostability compared with active abamectin. The Abam-PLA nanoparticles showed favorable deposition on the surface of cucumber foliage, and their adhesion to cucumber foliage surface followed the order: H2N-PLA-NS > CH3CO-PLA-NS > HOOC-PLA-NS. The adhesion of the nanoparticles to the foliage surface strongly depended on the functional groups on the nanoparticle surface. H2N-PLA-NS interacted with the cucumber foliage surface by hydrogen bond, electrostatic attraction, and covalent bond. In contrast, HOOC-PLA-NS interacted with the cucumber foliage through hydrogen bond and electrostatic repulsion. Regulatable adhesion could be achieved by tuning the interaction mode between the nanoparticles and foliage surface. This study provided a visual method to better understand the interaction mechanism between nanoparticles and crop foliage. Our results will be helpful to develop pesticide nanoparticles with strong adhesion to foliage, improving the effective utilization rate and bioavailability of pesticides.

The solid nanodispersion of 15% emamectin benzoate was prepared by the method of solidifying nanoemulsion. The mean particle size and polydispersity index of the solid nanodispersions were 96.6±1.7 nm and 0.352±0.041, respectively. The high zeta potential value of 31.3±0.5 mV and stable crystalline state of the nanoparticles suggested the excellent physical and chemical stabilities. The contact angle and retention compared with microemulsions and water dispersible granules on rice, cabbage, and cucumber leaves indicated its improved wettability and adhesion properties. The bioassay compared with microemulsions and water dispersible granules against diamondback moths and green peach aphids provided an evidence of its enhanced biological activity. This formulation composition could avoid organic solvents and obviously reduce surfactants. It is perspective in raising bioavailability and reducing residual pollution of pesticides and further improving agricultural production and environmental safety.

Abamectin is a common biocide used to control agricultural insect pests. However, the water insolubility of abamectin may result in extra organic solvent introduced in the environment. To solve this issue, it is desirable to develop nanoformulations to encapsulate abamectin with environment-friendly polymers. In this study, two polylactic acid based abamectin nanoformulations were prepared. The average particle sizes, measured by dynamic light scattering and transmission electron microscope, were 240 nm and 150 nm, respectively. The insecticidal activity of these nano-formulated abamectin was examined in the laboratory on the pea aphid, Acyrthosiphon pisum (Hemiptera: Aphididae). The acute toxicity of nano-formulated abamectin on non-target aphid predator Adalia bipunctata (Coleoptera: Coccinellidae) was also evaluated by topical, residual and oral exposure. The two nano-formulated abamectin had comparable insecticidal effect with commercial abamectin formulation against the pea aphid. Taking median lethal concentration (LC50) as the toxicological endpoint, nanoformulations had higher contact toxicity and lower oral toxicity to first-instar larvae of the predator A. bipunctata. These results are expected to contribute to the application of solvent-free nano-formulated pesticides that comply with the integrated pest management (IPM) strategies.

Background Pathogenic fungi are the causal agents of 70-80% of plant diseases. Therefore, it is imperative to explore new and high effective fungicides. Constructing nanoscale fungicides using nanomaterial and nanotechnology has attracted wide attention in recent years. Results In this research, a pyraclostrobin solid nanodispersion (PSND) was prepared using the self-emulsifying method. The solid nanodispersion had a mean particle size of 20 nm and a zeta potential of -29.3 mV. The solubility and dissolution rate of the PSND increased owing to the decrease in particle size and the actions of the surfactants. The contact angle and retention volumes of the PSND on cucumber and cabbage leaf surfaces were greater than those of the commercial water dispersible granule. In addition, the median lethal concentration against Fusarium oxysporum was 0.7 43 µg mL-1 . The toxicity of the nanoparticles was 4.5 times that of the water dispersible granule (WDG). The high fungicidal activity of PSND promoted the production of excess reactive oxygen species (ROS). The activity levels of the antioxidant enzymes containing superoxide dismutase (SOD) and catalase (CAT) decreased in F. oxysporum. Conclusion The research introduced a new method for preparing insoluble pyraclostrobin solid nanoformulation for fungicides to enhance the fungicidal activity and reduce environmental pollution. © 2019 Society of Chemical Industry.

Recent years have witnessed significant progress in nanotechnology and pesticide research in pest control and crop protection. There are more motivations to develop nanoformulations that are less harmful to environment than conventional formulations. The use of nanosuspension has been proposed as a novel formulation to process poorly soluble pesticides. In this study, the lambda-cyhalothrin nanosuspension (LCNS) was prepared in a melt emulsification method. The prepared nanosuspension had a mean particle size of 12.0 &plusmn, 0.1 nm and a polydispersity index of 0.279 &plusmn, 0.135. The smaller particle size and polydispersity confer better wettability, stability and bioavailability than conventional suspension concentrates. The excellent properties of the nanosuspension were attributed to the reduced particle size and the emulsification and dispersion of the surfactants. The LCNS eliminates the need for organic solvents and significantly reduces the amount of surfactant required. The simple production process of LCNS saves production and equipment costs. The results indicate that lambda-cyhalothrin nanosuspensions would have a broad application prospect in agricultural production systems.