Search

Analyzing the impacts of urban landscape patterns on the thermal environment has become one of the key research areas in addressing urban heat islands (UHIs) and improving the living environment. A case study was carried out in Fuzhou, Fujian Province of China, and bi-temporal Landsat imagery was selected to calculate land surface temperature (LST), percent impervious surface area (ISA), and fractional vegetation cover (FVC). The urban area was further divided into three concentric urban zones, ranging from the city center to the urban periphery, based on urban development densities. The spatial pattern of LST and its variance were analyzed and compared between different zones and different dates. The thermal environment contribution of different zones was also quantified to indicate the change in urban landscape patterns resulting from urban expansion in different zones. Furthermore, Geodetector was used to explore the single factors and interaction factors controlling the spatial patterns of LST in each zone. The results showed that (i) urban expansion primarily increased in Zone 2 and Zone 3, and the areal proportion of high and sub-high LST areas increased from 56.11% and 21.08% to 62.03% and 32.49% in Zone 2 and Zone 3, respectively, from 2004 to 2021; (ii) the heat effect contribution of Zones 2 and 3 reached from 75.16% in 2004 to 89.40% in 2021, indicating that the increase in ISA with >LSTmean was more pronounced in Zone 3 and Zone 2 during the period; (iii) the driving factors of LST spatial distribution were regionally different because of the different landscape patterns, and the explanatory power for the heterogeneity of LST in Zone 1 was weaker than in Zone 2 and Zone 3 in the study area; (iv) the interaction of different factors had a higher explanatory power in the spatial distribution of LST than a single factor in each zone because the distributions of land cover types are heterogeneous in urban areas. The results of this study can be used to improve urban planning for urban ecology and UHI mitigation. [ABSTRACT FROM AUTHOR]

The urban heat island (UHI) effect is the phenomenon of increased surface temperatures in urban environments compared to their surroundings. It is linked to decreased vegetation cover, high proportions of artificial impervious surfaces, and high proportions of anthropogenic heat discharge. We evaluated the surface heat balance to clarify the contribution of anthropogenic heat discharges into the urban thermal environment. We used a heat balance model and satellite images (Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper Plus (ETM+) images acquired in 1989 and 2001), together with meteorological station data to assess the urban thermal environment in the city of Fuzhou, China. The objective of this study was to estimate the anthropogenic heat discharge in the form of sensible heat flux in complex urban environments. In order to increase the accuracy of the anthropogenic heat flux analysis, the sub-pixel fractional vegetation cover (FVC) was calculated by linear spectral unmixing. The results were then used to estimate latent heat flux in urban areas and to separate anthropogenic heat discharge from heat radiation due to insolation. Spatial and temporal distributions of anthropogenic heat flux were analysed as a function of land-cover type, percentage of impervious surface area, and FVC. The accuracy of heat fluxes was assessed using the ratios of sensible heat flux (H), latent heat flux (L), and ground heat flux (G) to net radiation (R n), which were compared to the results from other studies. It is apparent that the contribution of anthropogenic heat is smaller in suburban areas and larger in high-density urban areas. However, seasonal disparities of anthropogenic heat discharge are small, and the variance of anthropogenic heat discharge is influenced by urban expansion, land-cover change, and increasing energy consumption. The results suggest that anthropogenic heat release probably plays a significant role in the UHI effect, and must be considered in urban climate change adaptation strategies. Remote sensing can play a role in mapping the spatial and temporal patterns of UHIs and can differentiate the anthropogenic heat from the solar radiative fluxes. The findings presented here have important implications for urban development planning. [ABSTRACT FROM PUBLISHER]

Land surface temperature (LST) is essentially considered to be one of the most important indicators used for assessment of the urban thermal environment. It is quite evident that land-use/land-cover (LULC) and landscape patterns have ecological implications at varying spatial scales, which in turn influence the distribution of habitat and material/energy fluxes in the landscape. This article attempts to quantitatively analyse the complex interrelationships between urban LST and LULC landscape patterns with the purpose of elucidating their relation to landscape processes. The study employed an integrated approach involving remote-sensing, geographic information system (GIS), and landscape ecology techniques on bi-temporal Landsat Thematic Mapper images of Southwestern Sydney metropolitan region and the surrounding fringe, taken at approximately the same time of the year in July 1993 and July 2006. First, the LULC categories and LST were extracted from the bi-temporal images. The LST distribution and changes and LST of the LULC categories were then quantitatively analysed using landscape metrics and LST zones. The results show that large differences in temperature existed in even a single LULC category, except for variations between different LULC categories. In each LST zone, the regressive function of LST with fractional vegetation cover (FVC) indicated a significant relationship between LST and FVC. Landscape metrics of LULC categories in each zone in relation to the other zones showed changing patterns between 1993 and 2006. This study also illustrates that a method integrating retrieval of LST and FVC from remote-sensing images combined with landscape metrics provides a novel and feasible way to describe the spatial distribution and temporal variation in urban thermal patterns and associated LULC conditions in a quantitative manner. [ABSTRACT FROM AUTHOR]

Surface reflectance (SR) estimation is the most essential preprocessing step for multi-sensor remote sensing inversion of geophysical parameters. Therefore, accurate and stable atmospheric correction is particularly important, which is the premise and basis of the quantitative application of remote sensing. It can also be used to directly compare different images and sensors. The Landsat-8 Operational Land Imager (OLI) and Sentinel-2 Multi-Spectral Instrument (MSI) surface reflectance products are publicly available and demonstrate high accuracy. However, there is not enough validation using synchronous spectral measurements over China's land surface. In this study, we utilized Moderate Resolution Imaging Spectroradiometer (MODIS) atmospheric products reconstructed by Categorical Boosting (CatBoost) and 30 m ASTER Global Digital Elevation Model (ASTER GDEM) data to adjust the relevant parameters to optimize the Second Simulation of Satellite Signal in the Solar Spectrum (6S) model. The accuracy of surface reflectance products obtained from the optimized 6S model was compared with that of the original 6S model and the most commonly used Fast Line-of-sight Atmospheric Analysis of Spectral Hypercubes (FLAASH) model. Surface reflectance products were validated and evaluated with synchronous in situ measurements from 16 sites located in five provinces of China: Fujian, Gansu, Jiangxi, Hunan, and Guangdong. Through the indirect and direct validation across two sensors and three methods, it provides evidence that the synchronous measurements have the higher and more reliable validation accuracy. The results of the validation indicated that, for Landsat-8 OLI and Sentinel-2 MSI SR products, the overall root mean square error (RMSE) calculated results of optimized 6S, original 6S and FLAASH across all spectral bands were 0.0295, 0.0378, 0.0345, and 0.0313, 0.0450, 0.0380, respectively. R2 values reached 0.9513, 0.9254, 0.9316 and 0.9377, 0.8822, 0.9122 respectively. Compared with the original 6S model and FLAASH model, the mean percent absolute error (MPAE) of the optimized 6S model was reduced by 32.20% and 15.86% for Landsat-8 OLI, respectively. On the other, for the Sentinel-2 MSI SR product, the MPAE value was reduced by 33.56% and 33.32%. For the two kinds of data, the accuracy of each band was improved to varying extents by the optimized 6S model with the auxiliary data. These findings support the hypothesis that reliable auxiliary data are helpful in reducing the influence of the atmosphere on images and restoring reality as much as is feasible. [ABSTRACT FROM AUTHOR]