Search

Abstract Face recognition systems have been widely applied in various scenarios in people's daily lives. The recognition rate and speed of face recognition systems have always been the two key technical factors that researchers focus on. Many excellent recognition algorithms achieve high recognition rates or good recognition speeds. However, more research is needed to develop algorithms that can effectively balance these two indicators. In this study, we introduce an improved particle swarm optimization algorithm into a face recognition algorithm based on image feature compensation techniques. This allows the system to achieve high recognition rates while simultaneously enhancing the recognition efficiency, aiming to strike a balance between the two aspects. This approach provides a new perspective for the application of image feature compensation techniques in face recognition systems. It helps achieve a broader range of applications for face recognition technology by reducing the recognition speed as much as possible while maintaining a satisfactory recognition rate. Ultimately, this leads to an improved user experience.

Textured coating technology is an effective method to improve the friction and wear performance of mold surfaces. The adhesion strength at the interface between the texture and the coating is crucial for its long-term serviceability. This paper studies the adhesion strength of micro-dimple's topography textured coatings, aiming to reveal the influence mechanism of micro-dimples on the adhesion strength of textured coating interfaces. Different diameters or texture area ratios of micro-dimples were prepared on the sample surface using a picosecond laser, followed by PVD coating deposition. Scratching tests and indentation tests were then conducted on the textured coating surface. The adhesion strength and crack propagation behavior of the coating on the surface of different samples were studied under dynamic and static contact conditions. The results showed that under dynamic contact conditions, the critical load for coating failure of most textured samples was higher than that of non-textured samples. As the depth and diameter of the micro-dimple's topography increased, the critical load first increased and then decreased, with the maximum critical load being 14.9% higher than that of the non-textured samples. Under static contact conditions, almost no coating spalling was observed around the indentation on the surface of the micro-dimple's topography textured coating, while the spalling areas of non-textured samples were mainly at the edges and surrounding areas of the indentation. In contrast, the spalling regions of the textured samples were primarily concentrated at the edges of the texture. It can be seen that the dimpled texture hinders crack propagation and reduces the interlocking network of cracks, thereby reducing coating spalling. The research results provide important theoretical guidance for the design and optimization of textured coatings on mold surfaces. [ABSTRACT FROM AUTHOR]

The triboelectric nanogenerator (TENG), as a novel energy harvesting technology, has garnered widespread attention. As a relatively young field in nanogenerator research, investigations into various aspects of the TENG are still ongoing. This review summarizes the development and dissemination of the fundamental principles of triboelectricity generation. It outlines the evolution of triboelectricity principles, ranging from the fabrication of the first TENG to the selection of triboelectric materials and the confirmation of the electron cloud overlapping model. Furthermore, recent advancements in TENG application scenarios are discussed from four perspectives, along with the research progress in performance optimization through three primary approaches, highlighting their respective strengths and limitations. Finally, the paper addresses the major challenges hindering the practical application and widespread adoption of TENGs, while also providing insights into future developments. With continued research on the TENG, it is expected that these challenges can be overcome, paving the way for its extensive utilization in various real-world scenarios. [ABSTRACT FROM AUTHOR]

This paper focuses on the prediction of piezoelectric coefficients, Young's moduli and shear moduli of unidirectional piezoelectric fiber/carbon nanotube (CNT)/graphene nanoplatelet (GNP)-reinforced polymer composites using a novel micromechanics modeling technique. The multiphase composite configuration is that piezoelectric fibers are embedded within a polymer matrix filled by CNT/GNP hybrids. Agglomeration of hybrid nanofillers as a significant factor is identified and incorporated in the micromechanical calculation. Parametric studies are carried out to understand the effect of volume fraction, size and dispersion type of carbonous nanofillers as well as the piezoelectric fiber volume fraction on the effective material constants of multiphase composites. It is found that in comparison with the piezoelectric fibrous composite, the piezoelectric fiber multiphase composite containing CNT/GNP hybrids shows better elastic and piezoelectric properties. Also, further improvement in effective properties can be obtained by increasing the length and percentage of CNTs and GNPs. But, degradation in the elastic and piezoelectric constants is observed by the agglomeration of CNT/GNP hybrids. The current results are found to be in close proximity with the experimental data and other numerical results available in the literature. [ABSTRACT FROM AUTHOR]

In this paper, the free vibration response of a stiffened functionally graded graphene nanoplatelet (GPL)-reinforced composite multilayer cylindrical shell panel is studied for the first time. The shell is stiffened by both stringers and rings. Additionally, the effect of reinforcing the shell panel, ring and stinger with GPLs is independently studied. Halpin–Tsai relations are employed to evaluate the mechanical properties of the shell panel, rings and stringers. The first-order shear deformation shell theory, accompanied by the Lekhnitsky smeared stiffener model, using the numerical finite element method and Hamilton principle, is employed to develop the governing motion equations of the shell panel. Four different types of GPL patterns, including FG-A, FG-X, FG-O and UD, are assumed across the thickness of the shell panel, rings and stringers. The effects of different factors, including various weight fractions and patterns of GPLs nanofillers, the geometry of the shell panel and stiffeners and two displacement boundary conditions, on the natural frequencies of the shell panel, have been studied. [ABSTRACT FROM AUTHOR]