Search

The Unified S-Band (USB) ranging/Doppler system and the Very Long Baseline Interferometry (VLBI) system as the ground tracking system jointly supported the lunar orbit capture of both Chang’E-2 (CE-2) and Chang’E-1 (CE-1) missions. The tracking system is also responsible for providing precise orbits for scientific data processing. New VLBI equipment and data processing strategies have been proposed based on CE-1 experiences and implemented for CE-2. In this work the role VLBI tracking data played was reassessed through precision orbit determination (POD) experiments for CE-2. Significant improvement in terms of both VLBI delay and delay rate data accuracy was achieved with the noise level of X-band band-width synthesis delay data reaching 0.2–0.3 ns. Short-arc orbit determination experiments showed that the combination of only 15 min’s range and VLBI data was able to improve the accuracy of 3 h’s orbit using range data only by a 1–1.5 order of magnitude, confirming a similar conclusion for CE-1. Moreover, because of the accuracy improvement, VLBI data was able to contribute to CE-2’s long-arc POD especially in the along-track and orbital normal directions. Orbital accuracy was assessed through the orbital overlapping analysis (2 h arc overlapping for 18 h POD arc). Compared with about 100 m position error of CE-1’s 200 km200 km lunar orbit, for CE-2’s 100 km100 km lunar orbit, the position errors were better than 31 and 6 m in the radial direction, and for CE-2’s 15 km100 km orbit, the position errors were better than 45 and 12 m in the radial direction. In addition, in trying to analyze the Delta Differential One-Way Ranging (DOR) experiments data we concluded that the accuracy of DOR delay was dramatically improved with the noise level better than 0.1 ns and systematic errors better calibrated, and the Short-arc POD tests with DOR data showed excellent results. Although unable to support the development of an independent lunar gravity model, the tracking data of CE-2 provided evaluations of different lunar gravity models through POD. It is found that for the 100 km100 km lunar orbit, with a degree and order expansion up to 165, JPL’s gravity model LP165P did not show noticeable improvement over Japan’s SGM series models (100×100), but for the 15 km×100 km lunar orbit, a higher degree-order model can significantly improve the orbit accuracy. Chang’E-2, VLBI, orbit determination, lunar gravity field

The satellite “Tance 1” of the “Double-Star Program” is the first truly scientific experimentation satellite of China. Its orbit is the farthest so far launched in China, with a geocentric apogee reaching 78 thousand kilometers. The tracking of “Tance 1” and of more distant space targets, such as the lunar exploration craft, can be realized with the VLBI technique of radio astronomy. In order to test and verify the role which the VLBI technique plays in the lunar exploration program of China, Shanghai Astronomical Observatory organized the only 3 tracking stations in China (located at Shanghai, Urumqi and Kunming), to carry out test tracking of “Tance 1,” and used the time delay data obtained to determine the orbit of “Tance 1” over a two-day period, so providing a preliminary assessment of the possibility of VLBI orbit determination. The fitting error of the orbit so obtained is about 5.5 m in the time delay and about 2 cm/s in the delay rate (this for checking only), much better than is provided by the preliminary orbit (used merely for ensuring tracking) in which the corresponding figures are around 2 km and 15 cm/s. Further, if the orbit is determined by using both the time delay and time delay rate data (with weights according to their internal accuracies), then the residuals are 5.5 m in the time delay and 2 cm/s in the delay rate. For an appreciation of the true accuracy of the VLBI orbit determination, we used simulation data (of the observed two-day VLBI data) and found the results depended greatly on the error in the dynamic model of the satellite which, however, is difficult to assess, while the formal residuals are of the order of 1 kin in the delay and of cm/s in the delay rate. The simulation computation also indicates that a joint determination using both VLBI and USB data will have an improved accuracy.