Search

Acute lung injury (ALI) is a severe respiratory disease with a high mortality rate. The integrity of the pulmonary endothelial barrier influences the development and prognosis of ALI. Therefore, it has become an important target for ALI treatment. Extracellular vesicles (EVs) are promising nanotherapeutic agents against ALI. Herein, endothelium‐derived engineered extracellular vesicles (eEVs) that deliver microRNA‐125b‐5p (miRNA‐125b) to lung tissues exerting a protective effect on endothelial barrier integrity are reported. eEVs that are modified with lung microvascular endothelial cell‐targeting peptides (LET) exhibit a prolonged retention time in lung tissues and targeted lung microvascular endothelial cells in vivo and in vitro. To improve the efficacy of the EVs, miRNA‐125b is loaded into EVs. Finally, LET‐EVs‐miRNA‐125b is constructed. The results show that compared to the EVs, miRNA‐125b, and EVs‐miRNA‐125b, LET‐EVs‐miRNA‐125b exhibit the most significant treatment efficacy in ALI. Moreover, LET‐EVs‐miRNA‐125b is found to have an important protective effect on endothelial barrier integrity by inhibiting cell apoptosis, promoting angiogenesis, and protecting intercellular junctions. Sequencing analysis reveals that LET‐EVs‐miRNA‐125b downregulates early growth response‐1 (EGR1) levels, which may be a potential mechanism of action. Taken together, these findings suggest that LET‐EVs‐miRNA‐125b can treat ALI by protecting the endothelial barrier integrity. [ABSTRACT FROM AUTHOR]

Flexible, lightweight, and cost‐effective organic light‐emitting diodes (OLEDs) show great promise for use in displays and lighting applications. However, creating highly efficient and stable deep‐blue OLEDs remains a challenge due to a lack of efficient functional materials, specifically hole transport materials (HTM). In this report, two new spiro‐HTMs are introduced with fluorene (FBP‐SFX) or dibenzofuran (DBF‐SFX) peripheral substituents. This study finds that the DBF‐SFX variant produces highly efficient deep‐blue OLEDs with a narrow emission (full‐width at half‐maximum FWHM of 25 nm) and the highest external quantum efficiency (EQE) of 33.2% among the FBP‐SFX (12.2%) and NPB (11.9%) variants. The superior performance of DBF‐SFX is attributed to its deeper highest occupied molecular orbital level (HOMO) and small trap density, which results in reduced band‐edge offset, lower turn‐on voltages, and balanced charge carrier densities. Importantly, the blue fluorescence OLED with DBF‐SFX displays exceptional device stability with LT95 over 420 h with an initial luminance of 1000 cd m−2. This is due to the stronger bond dissociation energy (BDE) and suppressed Exciton–Polaron Annihilation (EPA) using the dibenzofuran substituent. This work demonstrates a new HTM design approach using a spiro‐core architecture and dibenzofuran substituents to create efficient and long‐lasting deep‐blue OLEDs. [ABSTRACT FROM AUTHOR]

Multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters have immense potential for use in the development of high color purity and high-resolution organic light-emitting diode (OLED) displays. However, the scarcity of high-performance narrowband blue emitters has been a challenge. Herein, three blue MR-TADF emitters have been synthesized using halogen borylation. The introduction of dibenzofuran to extend the π-conjugate skeletons has resulted in emitters with exceptional properties such as large reverse intersystem crossing (RISC) rates, a high photoluminescence quantum yield (PLQY) of 92% and a small full width at half maximum (FWHM) value of 25 nm. The electroluminescent devices utilizing DABNA-3-DBF as emitters have displayed remarkable external quantum efficiencies (EQEs) of 25.9% and Commission Internationale de l'Eclairage (CIE) coordinates of (0.16, 0.07). This work presents a viable strategy for the development of high-performance blue MR-TADF with a narrow FWHM. [ABSTRACT FROM AUTHOR]

Background: Sulfur mustard (SM) is a highly toxic chemical warfare agent that has caused numerous casualties during wars and conflicts in the past century. Specific antidotes or therapeutic strategies are rare due to the complicated mechanism of toxicity, which still awaits elucidation. Clinical data show that acute lung injury (ALI) is responsible for most mortality and morbidity after SM exposure. Extracellular vesicles are natural materials that participate in intercellular communication by delivering various substances and can be modified. In this study, we aim to show that extracellular vesicles derived from human umbilical cord mesenchymal stromal cells (hucMSC-EVs) could exert therapeutic effects on SM-induced ALI, and to explain the underlying mechanism of effects. Methods: MiR-146a-5p contained in hucMSC-EVs may be involved in the process of hucMSC-EVs modulating the inflammatory response to SM-induced ALI. We utilized miR-146a-5p delivered by extracellular vesicles and further modified hucMSCs with a miR-146a-5p mimic or inhibitor to collect miR-146a-5p-overexpressing extracellular vesicles (miR-146a-5p+-EVs) or miR-146a-5p-underexpressing extracellular vesicles (miR-146a-5p−-EVs), respectively. Through in vivo and in vitro experiments, we investigated the mechanism. Results: The effect of miR-146a-5p+-EVs on improving the inflammatory reaction tied to SM injury was better than that of hucMSC-EVs. We demonstrated that miR-146a-5p delivered by hucMSC-EVs targeted TRAF6 to negatively regulate inflammation in SM-induced ALI models in vitro and in vivo. Conclusion: In summary, miR-146a-5p delivered by hucMSC-EVs targeted TRAF6, causing hucMSC-EVs to exert anti-inflammatory effects in SM-induced ALI; thus, hucMSC-EVs treatment may be a promising clinical therapeutic after SM exposure. [ABSTRACT FROM AUTHOR]

Biomineralization induced by microorganisms has become a hot spot in the field of carbonate sedimentology; however, the mechanisms involved still need to be explored. In this study, the bacterium Bacillus subtilis J2 (GenBank MG575432) was used to induce the precipitation of calcium carbonate minerals at Mg/Ca molar ratios of 0, 3, 6, 9, and 12. Bacillus subtilis J2 bacteria released ammonia to increase pH, but the ammonia released only made the pH increase to 8.25. Carbonic anhydrase was also produced to catalyze the hydration of carbon dioxide, and this process released carbonate and bicarbonate ions that not only increased pH but also elevated carbonate supersaturation. The biominerals formed at a Mg/Ca molar ratio of 0 were spherulitic, elongated, dumbbell-shaped, and irregularly rhombohedral calcite; at a Mg/Ca molar ratio of 3, the biominerals were calcite and aragonite, the weight ratio of calcite decreased from 26.7% to 15.6%, and that of aragonite increased from 73.3% to 84.4% with increasing incubation time. At higher Mg/Ca molar ratios, the biominerals were aragonite, and the crystallinity and thermal stability of aragonite decreased with increasing Mg/Ca molar ratios. FTIR results showed that many organic functional groups were present on/within the biominerals, such as C–O–C, N–H, C=O, O–H, and C–H. HRTEM-SAED examination of the ultra-thin slices of B. subtilis J2 bacteria showed that nano-sized minerals with poor crystal structure had grown or been adsorbed on the EPS coating. The EPS of the B. subtilis J2 strain contained abundant glutamic acid and aspartic acid, which could be deprotonated in an alkaline condition to adsorb Ca2+ and Mg2+ ions; this made EPS act as the nucleation sites. This study may provide some references for further understanding of the mechanism of biomineralization induced by microorganisms. [ABSTRACT FROM AUTHOR]

Robot-assisted minimally invasive surgery (RAMIS) has gained significant traction in clinical practice in recent years. However, most surgical robots rely on touch-based human-robot interaction (HRI), which increases the risk of bacterial diffusion. This risk is particularly concerning when surgeons must operate various equipment with their bare hands, necessitating repeated sterilization. Thus, achieving touch-free and precise manipulation with a surgical robot is challenging. To address this challenge, we propose a novel HRI interface based on gesture recognition, leveraging hand-keypoint regression and hand-shape reconstruction methods. By encoding the 21 keypoints from the recognized hand gesture, the robot can successfully perform the corresponding action according to predefined rules, which enables the robot to perform fine-tuning of surgical instruments without the need for physical contact with the surgeon. We evaluated the surgical applicability of the proposed system through both phantom and cadaver studies. In the phantom experiment, the average needle tip location error was 0.51  mm, and the mean angle error was 0.34 degrees. In the simulated nasopharyngeal carcinoma biopsy experiment, the needle insertion error was 0.16  mm, and the angle error was 0.10 degrees. These results indicate that the proposed system achieves clinically acceptable accuracy and can assist surgeons in performing contactless surgery with hand gesture interaction., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Wang, Zhang, Chen and Song.)

There is little investigation into the impact of molecular conformation on device efficiency and degradation of boron-nitrogen thermally activated delayed fluorescence emitters (BN-TADF). Herein, three highly-efficient green BN-TADF emitters have been designed to unveil the impact of peripheral phenyl groups on device efficiencies and lifetimes. Compared to BN-PhOH with the lowest EQE max of 19 %, BN-PhOCH 3 and BN-PhN(CH 3 ) 2 have achieved strongly enhanced EQE max of 25.6 % and 24.1 %, respectively. Importantly, the device lifetimes (LT 50 ) are dramatically improved from 1.7 h of BN-PhOH to 4.4 h of BN-PhOCH 3 and 7.7 h of BN-PhN(CH 3 ) 2 without encapsulation. According to in situ Raman spectroscopy and simulations, BN-PhN(CH 3 ) 2 of less conformation change after aging exhibits the best photostability. It is proposed that the torsion angle change between the BN core and the peripheral phenyl group results in BN-TADF degradation. This knowledge means precisely tuning peripheral groups of BN-TADF can achieve both higher device efficiencies and longer lifetimes., (© 2022 Wiley-VCH GmbH.)