Search

During the true triaxial hydraulic fracturing experiments, the compression stress applied to the specimen surface cannot be transferred to the interior immediately, resulting in inconsistency with in-situ stress conditions. To quantitatively analyze the stress transfer process from the surface to the interior of the specimen, an experimental method for monitoring the inside stress was proposed based on Fiber Bragg Grating (FBG) sensing technique, based on which the true triaxial stress loading experiments were conducted on a concrete-like specimen of 30 cm × 30 cm × 30 cm. The results show that the stresses inside the specimen require a certain loading time to reach the uniform state. The loading time required for stress transfer from the surface to the interior of the specimen decreases with the increase of compression stresses. The stress transfer process in rock materials is determined by creep. The closure of microcracks results in stress redistribution inside the specimen during creep. Moreover, a 3-D Burgers model is modified to describe the stress transfer process. Finally, the stress transfer phenomenon during hydraulic fracturing was verified by coal fracturing experiments. This study can help to understand the stress transfer mechanism, providing guidance for standardizing the laboratory simulation of in-situ stress. [ABSTRACT FROM AUTHOR]

BACKGROUND Few reports have focused on the association between apparent treatment-resistant hypertension (aTRH) and cardiovascular (CV) mortality in peritoneal dialysis (PD) population, thus we conducted this retrospective cohort to explore it. METHODS This was a retrospective cohort study conducted from January 2011 to January 2020 with PD patients in 4 Chinese dialysis centers. aTRH was defined according to the American College of Cardiology and American Heart Association guidelines. aTRH duration was calculated as the total number of months when patients met the diagnostic criteria in the first PD year. The primary outcome was CV mortality, and the secondary outcomes were CV events, all-cause mortality, combined endpoint (all-cause mortality and transferred to hemodialysis [HD]), and PD withdrawal (all-cause mortality, transferred to HD, and kidney transplantation). Cox proportional hazards models were used to assess the association. RESULTS A total of 1,422 patients were finally included in the analysis. During a median follow-up period of 26 months, 83 (5.8%) PD patients incurred CV mortality. The prevalence of aTRH was 24.1%, 19.9%, and 24.6% at 0, 3, and 12 months after PD initiation, respectively. Overall, aTRH duration in the first PD year positively associated with CV mortality (per 3 months increment, adjusted hazards ratio [HR], 1.29; 95% confidence interval 1.10, 1.53; P  = 0.002). After categorized, those with aTRH duration more than 6 months presented the highest adjusted HR of 2.92. Similar results were found for secondary outcomes, except for the CV event. CONCLUSIONS Longer aTRH duration in the first PD year is associated with higher CV mortality and worse long-term clinical outcomes. Larger studies are warranted to confirm these findings. CLINICAL TRIALS REGISTRATION There is no clinical trial registration for this retrospective study. [ABSTRACT FROM AUTHOR]

This study investigates the effects of different lubrication conditions on drawing force and microcup formation during micro deep drawing (MDD). Results show that graphene lubricant, in combination with TiO2 nanolubricants, has the potential to reduce friction during MDD. The peak drawing force was reduced by 15.39% when both lubricants were used together, while the use of TiO2 nanolubricant and 10.0 mg/ml graphene lubricant reduced it by 6.03% and 14.52%, respectively. The study also reveals that lubricants reduce wrinkling during the formation of microcups by minimising energy consumption during the primary formation. However, the combination of TiO2 nanolubricant and graphene lubricant can cause inhomogeneous formation on the upper part of the blank, leading to more apparent wrinkling. Overall, the study highlights the potential of TiO2 nanolubricant and graphene lubricant in reducing friction and improving microcup formation during MDD. [ABSTRACT FROM AUTHOR]

When the overhead line passes through the forest area, the conductor may contact the line to induce the tree-contact single-phase-to-ground fault (TSF), and the persistence of TSF may induce wildfires, bringing serious consequences. However, the amount of TSF electrical features is weak, and traditional protection devices cannot operate effectively, so it is urgent to obtain typical characteristics of TSF. In this study, the simulation experiment is carried out for the tree-contact single-phase-to-ground fault. Firstly, the relativity between fault and characteristics like zero-sequence voltage, zero-sequence current, and differential current are analyzed theoretically. Then, the simulation experiment platform of TSF is built, and the time-varying fault characteristics are acquired. The experimental results show that the average value of the zero-sequence voltage, the amplitude of the power-frequency component of the zero-sequence current, and the amplitude of the power-frequency component of the first and end differential current can accurately reflect the fault current development trend of the single-phase contact tree fault of the conductor, and can be used as the typical characteristic quantity of TSF. The results of this study are helpful for further understanding the fault characteristics of TSF and provide theoretical support for the identification and protection design of TSF. [ABSTRACT FROM AUTHOR]