Search

Cereal cyst nematode (Heterodera avenae), an important plant-parasitic nematode causing yield losses of wheat, has been found in many provinces in China. It is urgent to develop an effective method of protecting wheat from H. avenae damage. Because of its novel mode of action, fluopyram has been registered for controlling root-knot nematodes on cucumber and tomato in China. However, the bioactivity of fluopyram against H. avenae and whether this seed treatment can effectively control H. avenae on wheat remains unknown. In this study, a bioactivity assay revealed that fluopyram increased the mortality of H. avenae second-stage juveniles (J2), with lethal concentrations (LC) required to kill 50% (LC50) and 90% (LC90) of 0.92 mg⋅liter−1 and 2.92 mg⋅liter−1, respectively. Hatching tests showed that the H. avenae egg hatching percent was reduced by 35.2 to 69.2% with fluopyram at rates of 1.6 to 6.4 mg⋅liter−1, and that the egg hatching period was delayed by 3 to 9 days compared with the control. During pot and field trials, fluopyram seed treatment significantly reduced the H. avenae population density and increased wheat yield by 3.0 to 13.7%. Therefore, fluopyram seed treatment is an effective approach for the management of H. avenae on wheat in China.

It is highly desirable to fabricate a pesticide delivery system with excellent permeability to reduce the damage caused by root-knot nematodes in the soil. In this work, a novel electronegative pesticide nanocarrier was established by bonding anionic lignosulfonate with epoxy resin nanocarriers, which were loaded with abamectin (Aba). The results demonstrated that nanoparticles were negatively charged (-38.4 mV) spheres with an average size of 150 nm, and the encapsulation efficiency of nanocarriers for Aba was 93.4%. Polymer nanocarriers could prevent premature release of Aba and protect active ingredients from microbiological degradation. The adsorption strength of the soil to Aba loaded in nanocarriers was reduced by 6 to 10 times, so nanonematicides have remarkable soil mobility. Meanwhile, nanoparticles could easily penetrate the roots and nematodes. The application test confirmed that the control effect of this nanopesticide was 26-40% higher than that of the other agrochemicals. In consideration of its superior bioactivity and utilization rate, this pesticide delivery system has promising potential to control root-knot nematodes and improve the pesticide's utilization efficiency.

Root-knot nematodes are sedentary, soil-dwelling parasites that infect plant roots to disturb their nutrient and water utilization, causing significant yield losses. Avermectin is widely used in th...

At present, it is highly important to develop a simple and compatible nano delivery system for pesticides for foliar application, which can improve their insecticidal efficacy and resistance to adverse climates while reducing the environmental risks. Polyethylene glycol and 4,4-methylenediphenyl diisocyanate are used as hydrophilic soft and hydrophobic hard segments, respectively, for polymer self-assembly and polyurethane gelation in a nanoreactor. The nanocarrier synthesis and the pesticide loading are realized by a one-step integration procedure and suited well for hydrophobic active compounds. Modifying the molecular structure of the soft segment can adjust the flexibility of the nanocarriers and result in viscosity and deformation characteristics. After foliar spray application, the foliar flattening state of the nanogels increases the foliar protection area by 2.21 times and improves both pesticide exposure area and target contact efficiency. Concurrently, the flexibility and viscosity of the nanogels increase the washing resistance and the retention rate of the pesticide by approximately 80 times under continuous washing. The encapsulation of the nanogels reduces the foliar ultraviolet (UV) degradation and aquatic pesticide exposure, which increase the security of λ-cyhalothrine by 9.33 times. Moreover, the degradability of nanogels is beneficial for pesticide exposure and reducing pollution. This system has simple preparation, good properties, and environmental friendliness, making the nanocarriers promising for delivering pesticides.

To reduce the negative impact of nanopesticide carriers of on the environment, a greener nanodelivery system is necessary. Nanogels are nontoxic and degradable carriers, however, the potential of nanogels for delivering pesticides has not been proven. In this study, poly(vinyl alcohol)-valine, an ecofriendly polymer, was synthesized and used to fabricate emamectin benzoate nanogel suspension (EB NS). The nanoformulation showed favorable stability at low temperature, high temperature or one year storage, and in water with different hardnesses. The retention of the EB NS solution on leaves was higher than that of an EB emulsifiable concentrate (EC) by approximately 9% at a concentration of 10 mg L−1. The half-life of EB nanogels under Ultra Violet irradiation was prolonged by 3.3-fold. Moreover, the bioactivity of the EB NS against Plutella xylostella was higher than that of the EB EC. These advantages resulted in a relatively long duration of pest control. The response of nanogels to laccase, a digestive enzyme in the digestive tract of lepidopteran pests, enables pesticide release on demand. Nanogels have the advantages of being ecofriendly carriers, exhibiting higher utilization, and prolonged pest control periods, and they have a brilliant future in pesticide delivery.

The conventional emulsifiable concentrate (EC) formulation contains a large amount of aromatic solvents, which causes adverse effects to both the environment and human health due to the toxicity of the solvents. Here, we developed a 2.5% lambda-cyhalothrin EC formulation with ethylene glycol diacetate (EGDA) as the solvent, and the developed formulation serves as an environmental-friendly alternative to overcome the adverse effects of aromatic solvents. The physicochemical characterizations, wettability properties, phytotoxicity and bioassays of the EGDA-EC formulation were systematically investigated and compared with that of the EC formulation with xylene as the solvent. The results showed that both EC formulations had excellent emulsion properties and storage stabilities. Additionally, the EGDA-EC formulation possessed a higher flash point (96 °C), indicating safer production, storage and transport. The retentions of the EGDA-EC sample on leaves were 1.22–1.46-fold higher than that of the xylene-EC sample, and the EGDA-EC also exhibited lower surface tensions and contact angles, which would benefit decreasing drift-off and improving utilization. Furthermore, the bioassays demonstrated that the EGDA-EC formulation had lower acute toxicity to aquatic organisms and higher control efficacy to target insects compared with the xylene-EC formulation. Therefore, EGDA is a promising carrier for oil-soluble agrochemicals to improve their application performance and reduce their adverse effects.

Microcapsules (MCs) prepared with diverse wall material structures may exhibit different properties. In this study, MCs were fabricated with three kinds of epoxy phenolic novolac resins (EPNs), which possessed unique epoxy values as wall-forming materials by interfacial polymerization. The effects of the EPN types on the surface morphology, particle size distribution, encapsulation efficiency, thermal stability as well as release behavior and bioactivity of the MCs were investigated. In all three samples, the MCs had nearly spherical shapes with fine monodispersities and sizes in the range of 7–30 μm. Scanning electron microscopy (SEM) images showed that some small pores (ranging from 50 nm to 400 nm) appeared on the microcapsule surfaces and that the porosity decreased with an increasing of epoxy value. The X-ray diffractometer (XRD) analysis indicated that the cured EPN shells had larger degrees of crosslinking with higher epoxy values, leading to better thermal stabilities. Moreover, the release rate of the core material (pendimethalin) decreased with an increasing of epoxy value and thus resulted in a lower herbicidal control efficacy. The results of our research will enhance the potential application of EPNs as smart wall-forming materials to prepare porous MCs for controlled release.

To reduce the amount of organic solvents in pendimethalin emulsifiable concentrate (EC), small-size microcapsules (S-MCs) and large-size microcapsules (L-MCs) were prepared with polyurea as a wall material. Petri-dish bioassays were carried out to investigate the bioactivity of formulations and the influence of both organic matter and moisture. The relationships between degradation and the biological activity of three pendimethalin formulations in the soil were investigated, and field experiments were executed to verify the laboratory results. The laboratory tests showed the following: (1) the bioactivity of EC and S-MCs was similar and greater than that of L-MCs; (2) organic matter could reduce the bioactivity of MCs and EC, and the impact of organic matter on L-MCs was greater; (3) increased soil moisture content had no significant effect on the bioactivity of EC but slightly reduced that of the MCs; and (4) the L-MCs showed significantly more prolonged residual and effective persistence in the soil than did EC and S-MCs. However, the field experiments indicated that the herbicidal efficacies of L-MCs at the early and late stages were both lower than those of EC. Comprehensive analysis of the results indicated that the main reason that the herbicidal efficacy of L-MCs was lower than that of EC in the field was that L-MCs missed the optimal herbicidal periods due to the slow-release characteristics of L-MCs. The S-MCs had both similar release rates and herbicidal efficacy in the field as EC. Therefore, to develop a good pesticide formulation, the occurrence and damage characteristic of pests must be considered.

Bursaphelenchus xylophilus causes pine wilt disease (PWD), which severely damages pine species. The plant volatile trans‑2-hexenal has strong activity against nematodes, although the precise mechanism of this inhibitory action remains unclear. In this paper, the fumigant effects of the LC10 and LC30 of trans‑2-hexenal on B. xylophilus were demonstrated. The trans‑2-hexenal treatments significantly inhibited the dispersal ability of nematodes. The results also indicated that trans‑2-hexenal affects the metabolism of nutrients and the activity of digestive enzymes. Among detoxifying enzymes, after treatment with trans‑2-hexenal, glutathione S-transferase activity increased significantly and general esterase activity decreased significantly. Based on these results, trans‑2-hexenal disturbs the normal physiological and biochemical activities of this nematode. These results provide valuable insight into the nematicidal mechanisms of trans‑2-hexenal.

Sustained-release profile is an important component in the quality control of microcapsules. In the current study, we propose a reliable, convenient, and versatile strategy to assess the controlled-release performance of MCs under artificial, simulated conditions. Dissolution tests were performed using an experimental device equipped with syringe filters. The optimum experimental conditions utilized 80% v/v methanol (3 ml) as a release medium at each sampling point, Nylon 6 filters (13 mm diameter, 0.22 μm pore size) as diffusion barriers, and a sampling regime based on predetermined changed intervals. Validation tests demonstrated that this strategy possessed favorable universality for three wall materials (polyurea, polyurethane and urea-formaldehyde) and three core materials (phoxim, pyraclostrobin and clomazone), as all sampling points had standard errors below 3.4%. Our proposed method also showed apparent advantages in experimental precision and the demand for a release medium compared with dynamic dialysis.

BACKGROUND Bursaphelenchus xylophilus is a serious quarantined pest that causes severe damage and major economic losses to pine forests. Because of the adverse effects of some traditional nematicides on humans and the environment, the search for new plant toxicants against these nematodes has intensified. Nematicidal activity of trans-2-hexenal, which is a six-carbon aldehyde present in many plants, was tested against the nematode. RESULTS trans-2-Hexenal showed significant efficacy against B. xylophilus in a dose range of 349.5–699 g m−3 by fumigation of pinewood logs. Additionally, it had significant nematicidal activity against different life stages of B. xylophilus in an in vitro test, with second-stage larvae (L2s) being the most sensitive, with an LC50 value of 9.87 µg mL−1 at 48 h. Egg hatch was also significantly inhibited. Further studies revealed that trans-2-hexenal inhibited the reproductive activity of B. xylophilus, with negative effects on reproduction rate and egg numbers. Moreover, trans-2-hexenal reduced the body length of B. xylophilus. Respiratory rate and thrashing behaviour of B. xylophilus also decreased following treatment with this compound. CONCLUSION trans-2-Hexenal had significant nematicidal activity against B. xylophilus, providing a basis for elucidation of the mode of action of trans-2-hexenal against plant-parasitic nematodes in future studies. © 2016 Society of Chemical Industry

The application of pesticide microcapsules (MCs) in agriculture is becoming more and more popular. In this study, the effects of different wall materials on the stomach toxicity, contact toxicity, length of efficacy, and photolysis characteristics of pesticide microcapsules were investigated. The results showed that microencapsulation reduced the stomach and contact toxicities of phoxim and prolonged the efficacy of this light-sensitive chemical in the greenhouse test. Neither of the degradation curves for microencapsulated phoxim under ultraviolet light fit a first-order model, although the emulsifiable concentrate (EC) degradation curve fit it well. The phoxim-loaded polyurea microcapsules (PUA-MCs) showed significantly increased UV-resistance ability, stomach toxicity, and contact toxicity compared with the phoxim-loaded urea-formaldehyde microcapsules (UF-MCs). These experiments indicated that it is crucial to select the appropriate wall materials for pesticide microcapsules on the basis of application sites and physicochemical properties of pesticide active ingredients.

Fusarium crown and root rot is among the world's major agricultural diseases caused by Fusarium. oxysporum f. sp. radicis-lycopersici, which always resulted in serious damage to vegetable production worldwide. Pyraclostrobin is a broad-spectrum and highly effective fungicide with strong activity against F. oxysporum f. sp. radicis-lycopersici. However, the limited distribution of pyraclostrobin in the soil compromises its field fungicidal performance due to the difficulty in providing a large protection zone surrounding the growing root system of the plant. Nanotechnology offers a great opportunity to develop new strategies for functionalized pesticide loading systems. In this study, the physicochemical properties of pyraclostrobin in the soil were manipulated by encapsulating the active ingredients in a lignin-modified polymer nanocapsule (NCS) to produce a nanoscale delivery system with excellent soil mobility. These nanocapsules exhibited a stable core-shell structure and rapid release performance. In addition, they also increased the distribution of particles on the surface of target organisms and enhanced the soil mobility of pyraclostrobin, mainly benefitting from the nanocapsule's negatively charged polymer shell and nanoscale size. Pot experiments showed that, compared to treatment with nanosized emulsion in water (NEW) and micron-grade microcapsule suspension (CS) of pyraclostrobin, the NCS provided improved control efficacy on tomato crown and root rot. They also showed lower pesticide residue in the soil than CS treatment.

The southern root-knot nematode (RKN), Meloidogyne incognita, is the most disastrous and prevalent nematode threat to the production of crops, especially vegetables. In the current study, second-stage juveniles (J2) of M. incognita were collected from five regions near Tai’an, China. The toxicity of abamectin to these J2 had insignificant differences, with LC50 values of approximately 2 mg/L. Two pesticide application approaches (i.e., blending-of-soil and root-irrigation) were adopted in pot experiments; blending-of-soil was more beneficial for promoting the efficacy of abamectin on the RKN of tomatoes. Abamectin microcapsule suspension exhibited superiority to emulsifiable concentrate (EC) at dosages of 5 and 10 mg active ingredient per plant integrating efficacy, root length, plant height, the fresh weight of roots, and the fresh weight of stems + leaves. Adsorption, leaching, and mobility of abamectin in the soil also verified bioactivity test results. Modifying the formulation of abamectin can promot...

A model thiacloprid 25% suspension concentrate was prepared using Tersperse2700 (X1), AE1601 (X2), xanthan gum (X3) and Veegum (X4). A response surface methodology (RSM) was used to evaluate the influences of four experimental factors on the aqueous separation ratio (R1), centrifugal sedimentation ratio (R2) and viscosity (R3). The results show that the main factors influencing the three responses were X3, X4 and X2 followed by X1; moreover, several interactions were also significant. Multiple-response optimization was performed based on a desirability function, considering the minimum R1, R2, and R3 as well as the financial cost. The integrated optimum conditions were X3 = 0.24%, X4 = 1.33%, X2 = 0.50%, and X1 = 2.90% (mass fraction). A verification experiment demonstrated that the optimized formula R1, R2, and R3 were 1.69%, 2.63% and 257.74 mPa s with the average relative predicted value errors 7.69%, 4.18% and −1.41%, respectively. The response surface methodology is an effective approach for optimizing the suspension concentrate formula with comprehensive advantages.

In this paper, porous microcapsules with tunable pore sizes were prepared using interfacial polymerization by employing a temperature-responsive cross-linking agent above its so-called cloud point temperature (Tscp). The influences of porosity on the surface morphology, release profile and biological activity of the microcapsules were investigated. The results showed that both pore size and pore density could be controlled by regulating either the amount of cross-linking agent or the ratio of core material to shell material. Furthermore, the porosity of the microcapsules determined their release properties and further regulated the bioactivity of the microcapsules. In addition, the mechanism of pore formation was confirmed by investigating the morphology of microcapsules below the Tscp. The microencapsulation methodology described here is convenient and versatile, which can be easily extended to encapsulate a broad range of lipophilic core materials.

A model 25% suspension concentrate (SC) of thiacloprid was adopted to evaluate an integrative approach of uniform design and response surface methodology. Tersperse2700, PE1601, xanthan gum and veegum were the four experimental factors, and the aqueous separation ratio and viscosity were the two dependent variables. Linear and quadratic polynomial models of stepwise regression and partial least squares were adopted to test the fit of the experimental data. Verification tests revealed satisfactory agreement between the experimental and predicted data. The measured values for the aqueous separation ratio and viscosity were 3.45% and 278.8 mPa·s, respectively, and the relative errors of the predicted values were 9.57% and 2.65%, respectively (prepared under the proposed conditions). Comprehensive benefits could also be obtained by appropriately adjusting the amount of certain adjuvants based on practical requirements. Integrating uniform design and response surface methodology is an effective strategy for optimizing SC formulas.

Botanical nematicides have recently received increasing interest because of the high risks of some traditional nematicides to human health and the environment. This study evaluated the nematicidal activity of a plant volatile, trans-2-hexenal, against Meloidogyne incognita. This compound exhibited higher activity in a fumigation experiment than in the aqueous phase in vitro. Both in pot tests and in field trials, trans-2-hexenal showed significant efficacy against M. incognita while maintaining excellent plant growth, especially at doses of 1000 and 500 L ha–1, which were superior to that of abamectin at 180 g ha–1 via hole application treatment but not significantly different from fumigation with 400 kg ha–1 of dazomet. Furthermore, plants treated with 500 L ha–1 trans-2-hexenal had fruit yields 20.2 and 45% greater than the control group. On this basis, trans-2-hexenal may be a potential alternative fumigation agent for controlling M. incognita on tomato crops.

A model chlorpyrifos microcapsule was prepared using coordination assembly between Fe3+ and tannic acid (TA). The influence of independent variables such as the dropping rate of TA (X1) and Fe3+ (X3), the concentration of TA (X2) and Fe3+ (X4), and the reaction temperature (X5) on the encapsulation efficiency (R1) and release characteristics (R2) of the microcapsule had been investigated, based on a central composite design with five factors and five levels. The results showed that the main factors influencing R1 and R2 were X4 and X2, then the interaction between X2 and X4, followed by X5 and X3. The optimal formula mainly based on higher R1 and lower R2 were determined and then tested. The optimized conditions led to an encapsulation efficiency and cumulative release proportion of 97.12% ± 0.72% and 40.07% ± 0.53%, along with the average relative errors of predicted values being 1.78% and −1.60%, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42865.

The broad-spectrum and widely used fungicide pyraclostrobin is encapsulated using a coordination assembly between Fe3+ and tannic acid to promote its efficacy and environmental safety. The deposition is confirmed by the surface zeta potential and energy dispersive spectroscopy. Optical microscopy, scanning electron microscopy, transmission electron microscopy (TEM), and atomic force microscopy (AFM) observations are integrated to characterize the pyraclostrobin-loaded microcapsules (MCs). These MCs retain a spherical shape when suspended in water but quickly deform or rupture after the water evaporates when deposited for 1 cycle. After sequential deposition of the membrane, the membrane thickness increases linearly according to TEM and AFM height analyses. These MCs show satisfactory efficacy on rice blast, resulting in significantly higher yields at doses of 120 and 180 g ha−1. Moreover, these MCs display significantly lower toxicity to Brachydanio rerio, Daphnia magna, Xenopus laevis, and Rana nigromaculata. Overall, this novel microencapsulation strategy is capable of promoting the efficacy and environmental safety of pyraclostrobin.