Search

The pool fires that occur behind obstructions in a ventilated environment are very different from other wind-blown pool fires. The pool fire formed by fuel leakage in an engine nacelle is a typical example of a pool fire influenced by cross winds and baffles. Mastering the combustion characteristics of this type of fire is of great significance for fire prevention and control. In this study, the burning rate, flame length, and flame tilt angle of heptane pool fires behind a baffle under different cross wind velocities (ranging from 0 to 5 m/s) were experimentally investigated. Square pool fires with dimension of 8 cm and 12 cm with baffle height from 4 to 12 cm and different distances between fire and baffle (0, 20, 30 cm) were tested in a wind tunnel. The experimental results show that the burning rate increases with the increase in cross wind velocity for each baffle height. As wind velocity exceeds 2 m/s, the burning rate first decreases and then increases with the increase in baffle height. The flame length initially increases and then decreases with increasing wind velocity. The upper flame tilt angle is mainly affected by the cross wind, while the bottom flame tilt angle is influenced by the combined effects of cross wind velocity, baffle height, and distance between baffle and flame. The empirical correlations under different distances between baffle and flame, with wind velocity and baffle height accounted for, are then proposed for the dimensionless heat release rate and the flame length of heptane pool fires. [ABSTRACT FROM AUTHOR]

In this study, styrene‐acrylonitrile‐glycidyl methacrylate (SAG) series copolymers were specially designed for producing the recycled acrylonitrile‐butadiene‐styrene (rABS)/poly(butylene terephthalate) (PBT)/SAG blends, which were prepared through the process of continuous melt blending and batch feeding. The effects of viscosity composition, SAG chemical composition, and SAG content on the morphology, and rheological and mechanical properties of the blends have been investigated. As demonstrated by morphological observation, the variety of viscosity composition of the blends affects the size of dispersed PBT droplets. Moreover, high viscosity of rABS matrix seems to facilitate the formation of smaller dispersed phase size of blends. Various SAG chemical compositions have different stabilities on the morphology of the blends, which affects the deformation, fragmentation, and coalescence of dispersed phase droplets. In addition, a finer phase morphology can be achieved when the density distribution of epoxy group is optimal in SAG copolymer. Rheological characterization manifested that the rheological properties of the blends depends strongly on its composition and structure, while the crosslinking degree is associated with the concentration of reactive groups and extent of reaction. Thereby, the rheological behavior of the blends during processing can be controlled by changing the reactive sequence and adding the quantity of epoxy group. The test on mechanical properties verified that a recycled product with excellent performance can be obtained by altering processing methods and the blends formula, which may be further applied to the 3D printing materials required by fused deposition modeling technology. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48310. [ABSTRACT FROM AUTHOR]