Search

Geometric complexities play an important role in the nucleation, propagation, and termination of strike-slip earthquake ruptures. The 2021 Mw7.4 Maduo earthquake rupture initiated at a large releasing stepover with a complex fault intersection. In the epicentral region, we conducted detailed mapping and classification of the surface ruptures and slip measurements associated with the earthquake, combining high-resolution uncrewed aerial vehicle (UAV) images and optical image correlation with field investigations. Our findings indicate that the coseismic ruptures present discontinuous patterns mixed with numerous lateral spreadings due to strong ground shaking. The discontinuous surface ruptures are uncharacteristic in slip to account for the large and clear displacements of offset landforms in the epicentral region. Within the releasing stepovers, the deformation zone revealed from the optical image correlation map indicates that a fault may cut diagonally across the pull-apart basin at depth. The left-lateral horizontal coseismic displacements from field measurements are typically ≤0.6 m, significantly lower than the 1–2.7 m measured from the optical image correlation map. Such a discrepancy indicates a significant proportion of off-fault deformation or the possibility that the rupture stopped at a shallow depth during its initiation phase instead of extending to the surface. The fault network and multi-fault junctions west and south of the epicenter suggest a possible complex path, which retarded the westward propagation at the initial phase of rupture growth. A hampered initiation might enhance the seismic ground motion and the complex ground deformation features at the surface, including widespread shaking-related fissures. [ABSTRACT FROM AUTHOR]

Summary: A porous burner stacked in turn with 3‐ and 9‐mm alumina pellets was established to perform C2H4 combustion experiments by acquiring the flammable limits, temperature variation characteristics, combustion wave velocity, pollutant emissions, and treatment efficiency. The burner operated well at equivalence ratios within 0.3 to 0.7. Larger alumina pellets widened the burner's lower flammable limit. As the flame propagated downstream, the higher premixed gas flow velocity and larger alumina pellets, the higher combustion wave velocity, whereas the circumstances were opposite as the flame spread upstream. The combustion temperature increased with the equivalence ratio and premixed gas flow velocity. In response to the effect of the alumina pellet dimension, 3‐mm alumina pellets corresponded to higher combustion temperatures, lower CO emissions, and higher treatment efficiency than those less than 9‐mm conditions. Schematic representation of flame behaviors in the porous burner with different alumina pellets. [ABSTRACT FROM AUTHOR]