Search

Abstract Joining processes especially for metallic materials play critical roles in manufacturing industries and structural applications, therefore they are essential to human life. As a more complex technique, under-liquid joining has far-reaching implications for national defense, offshore mining. Furthermore, up-to-now, the effective joining of metals in extreme environments, such as the flammable organo-solvent or the arctic liquid nitrogen, is still uninvestigated. Therefore, an efficient under-liquid joining approach is urgently called for. Here we report a method to join different types of metallic glasses under water, seawater, alcohol and liquid-nitrogen. The dynamic heterogeneity and liquid-like region expansion induces fluid-like behavior under ultrasonic vibration to promote oxide layer dispersion and metal bonding, allowing metallic glasses to be successfully joined in heat-free conditions, while still exhibiting excellent tensile strength (1522 MPa), bending strength (2930 MPa) and improved corrosion properties. Our results provide a promising strategy for manufacturing under offshore, polar, oil-gas and space environments.

Abstract Background Echinococcosis, a zoonotic parasitic disease, is caused by larval stages of cestodes in the Echinococcus genus. Echinococcosis is highly prevalent in ten provinces/autonomous regions of western and northern China. In 2016, an epidemiological survey of Tibet Autonomous Region (TAR) revealed that the prevalence of human echinococcosis was 1.66%, which was much higher than the average prevalence in China (0.24%). Therefore, to improve on the current prevention and control measures, it is important to understand the prevalence and spatial distribution characteristics of human echinococcosis at the township level in TAR. Methods Data for echinococcosis cases in 2018 were obtained from the annual report system of echinococcosis of Tibet Center for Disease Control and Prevention. Diagnosis had been performed via B-ultrasonography. The epidemic status of echinococcosis in all townships in TAR was classified according to the relevant standards of population prevalence indices as defined in the national technical plan for echinococcosis control. Spatial scan statistics were performed to establish the geographical townships that were most at risk of echinococcosis. Results In 2018, a total of 16,009 echinococcosis cases, whose prevalence was 0.53%, were recorded in 74 endemic counties in TAR. Based on the order of the epidemic degree, all the 692 townships were classified from high to low degrees. Among them, 127 townships had prevalence rates ≥ 1%. The high prevalence of human echinococcosis in TAR, which is associated with a wide geographic distribution, is a medical concern. Approximately 94.65% of the villages and towns reported echinococcosis cases. According to spatial distribution analysis, the prevalence of human echinococcosis was found to be clustered, with the specific clustering areas being identified. The cystic echinococcosis primary cluster covered 88 townships, while that of alveolar echinococcosis’s covered 38 townships. Conclusions This study shows spatial distributions of echinococcosis with different epidemic degrees in 692 townships of TAR and high-risk cluster areas at the township level. Our findings indicate that strengthening the echinococcosis prevention and control strategies in TAR should directed at townships with a high prevalence and high-risk clustering areas. Graphical Abstract

In this work, a rapid and controllable ultrasonic vibration method for forming Al-based metallic glass at room temperature is proposed. This method can dramatically improve the forming ability of Al-based metallic glasses, which are virtually brittle at room temperature and have almost no supercooled liquid region at high temperatures. Under ultrasonic vibration, Al-based metallic glasses exhibited obvious plastic flow, with a maximum deformation degree up to 58% and an average deformation degree up to 43%. It is worth mentioning that no crystalline peaks were found on the X-ray diffraction patterns after deformation under ultrasonic vibration, and the mechanical properties remained the same as the primary sample. The present results provide a new approach for the deformation and forming of Al-based metallic glasses, which can significantly broaden their applications.

A hybrid process combining ultrasonic injection molding and electrical discharge machining was proposed to realize the economic, high-precision, and environmental-friendliness production of glass fiber reinforced polypropylene microstructured parts. First, the prism array microstructures were processed on tungsten carbide-cobalt (WC-8 wt% Co) substrate by low-speed wire electrical discharge machining and used as the mold core. Then, the glass fiber reinforced polypropylene composite (GF/PP) was melted under ultrasonic vibration, and the surface microstructure of the mold core was replicated. The experimental results show that this method can efficiently and accurately manufacture microstructured parts, and the microstructure has a high replication rate up to 95.5%. By replicating the microstructure, the surface contact angle of GF/PP parts increased from 57.1° to 134.9°, and the wettability changed from hydrophilicity to hydrophobicity. The mechanical properties test results show that the GF/PP parts fabricated by ultrasonic injection molding had excellent mechanical properties, and the 30% GF/PP parts show the highest tensile strength of 56.9 MPa. This work provides a new option for fabricating fiber reinforced composite parts.