Search

Paraesophageal hiatus hernia (PEHH) is an uncommon type of diaphragmatic hernia in the pediatric age group. Two patients aged 5-months and 8-months presented with respiratory symptoms and underwent a laparoscopic repair. Preoperative assessment included chest x-ray and CT scan. We suggest that laparoscopic repair of PEHH in infants is safe and preferred mode of the treatment.

We report a rare case of a 3-year-old male child with scapular bronchogenic cyst. The cyst was excised because of associated pain and discharge from the swelling. Till date, 64 cases of cutaneous bronchogenic cyst have been reported in the literature. Only 12 of these patients had lesion located in periscapular area. The treatment is surgical as it can undergo malignant transformation.

Objective: To evaluate the anesthetic efficacy of 4% articaine with 1:100,000 epinephrine via primary intraosseous (IO) injection with the QuickSleeper device vs inferior alveolar nerve block (IANB) for mandibular first molars diagnosed with symptomatic irreversible pulpitis (SIP)., Methods: Sixty-four patients with a first mandibular molar with SIP were randomly divided into 2 groups: IO (n = 32) and IANB (n = 32). Each received either an IO injection with the 5th generation QuickSleeper device or a conventional IANB with 1.7 mL 4% articaine with 1:100,000 epinephrine. Success was defined as no/mild pain upon the access cavity preparation and initial filing. Injection pain, anesthetic onset, heart rate (HR) change, HR recovery time, and duration of anesthesia were also recorded and analyzed., Results: The success rates were 40.6% for IANB and 81.2% for IO (P < .001). IO exhibited a significantly lower injection pain (P = .027), a shorter onset of action (P < .001), a greater heart rate increase (P < .001), a faster heart rate recovery time (P < .001), and a shorter duration of action (P < .001) vs IANB., Conclusion: Primary IO anesthesia using the fifth generation of the QuickSleeper device was more successful than IANB when using 4% articaine with 1:100,000 epinephrine to anesthetize mandibular first molars with SIP. The QuickSleeper device appeared to be a viable alternative to IANB for mandibular anesthesia.

Background: This study aimed to assess the accuracy of two different endodontic guides for fiber post removal., Methods: In this in vitro study, 54 maxillary canine fiber posts were mounted on 36 maxillary stone casts; 18 teeth were mounted unilaterally, and 36 teeth were mounted bilaterally. Static endodontic guides were fabricated according to baseline cone-beam computed tomography (CBCT) and intraoral optical scans using Blue Sky software. In the single-sleeve endodontic guides group (SSG), two anterior and two posterior teeth were included in a 5-unit guide. In the double-sleeve endodontic guides group (DSG) group, the guide was passed through the midline to include both canine teeth and extended by 2 teeth posterior to the canine teeth bilaterally (a 10-unit guide). After drilling, postoperative CBCT scans were taken and superimposed on the virtually designed path, and the maximum coronal deviation (MCD) at the marginal entry point of the tooth, maximum apical deviation (MAD) at 10 mm apical to the tooth margin, and maximum angular deflection (MAnD) of the drill were calculated., Results: The mean MCD, MAD, and MAnD were 0.34 mm, 0.6 mm, and 2.32 degrees, respectively, in the SSG and 0.31 mm, 0.7 mm, and 2.37 degrees, respectively, in the DSG. The two groups were not significantly different from each other in terms of MCD (P = 0.573), MAD (P = 0.290), or MAnD (P = 0.896)., Conclusions: The accuracies of the two techniques, the extended double sleeve guide and the single sleeve guide, were comparable and thus DSG may be used for removal of fiber posts in adjacent or distant teeth., (© 2024. The Author(s).)

Objectives: The positive effects of strontium on dental and skeletal remineralization have been confirmed in the literature. This study aimed to assess the properties of a calcium silicate cement (CSC) containing a sintered strontium silicate phase., Materials and Methods: The calcium silicate and strontium silicate phases were synthesized by the sol-gel technique. Strontium silicate powder in 0 (CSC), 10 (CSC/10Sr), 20 (CSC/20Sr), and 30 (CSC/30Sr) weight percentages was mixed with calcium silicate powder. Calcium chloride was used in the liquid phase. X-ray diffraction (XRD) of specimens was conducted before and after hydration. The setting time and compressive strength were assessed at 1 and 7 days after setting. The set discs of the aforementioned groups were immersed in the simulated body fluid (SBF) for 1 and 7 days. The ion release profile was evaluated by inductively coupled plasma-optical emission spectrometry (ICP-OES). Biomineralization on the specimen surface was evaluated by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). Data were analyzed by the Kolmogorov-Smirnov test, one-way and mixed ANOVA, Levene's test, and LSD post hoc test ( P   < 0.05)., Results: Except for an increasement in the peak intensity of hydrated specimens, XRD revealed no other difference in the crystalline phases of hydrated and nonhydrated specimens. The compressive strength was not significantly different at 1 and 7 days in any group ( P   > 0.05). The setting time significantly decreased by an increase in percentage of strontium ( P   < 0.05). Release of Ca and Si ions significantly decreased by an increase in percentage of strontium ( P   < 0.05). SEM/EDS showed the formation of calcium phosphate deposits at 1 and 7 days., Conclusion: Incorporation of 10-30 wt% sintered strontium silicate phase as premixed in CSC can significantly decrease the setting time without compromising the compressive strength or biomineralization process of the cement., Competing Interests: The authors declare that there are no conflicts of interests regarding the publication of this paper., (Copyright © 2024 Saeede Zadsirjan et al.)

Background: This study intended to evaluate the association between several endodontic prognostic factors with the presence of periapical lesions (PLs), their volume, and bone characteristics including cortical bone destruction (CBD) and buccal plate bone height (BPBH) in root-filled molar teeth using cone-beam computed tomography., Methods: A collection of 143 scans of endodontically treated maxillary/mandibular first or second molars recorded over 8 years, were obtained from a specialized radiology center. Data on prognostic factors including tooth number, gender, jaw type, the status and number of missed canals, obturation length, restoration type, presence of a separated instrument, presence of a post or screw in the canals, and presence of perforation were collected. The assessed outcomes included PL presence, PL volume, CBD, and BPBH. The association between prognostic factors and outcomes was evaluated using multiple logistic regression models with adjusted covariates and multifactorial ANOVA at a significance level of 0.05., Results: A total of 282 molars from 82 women and 50 men with a mean age of 40.6 ± 12.27 were included. Among those, 139 teeth presented PL with a mean volume of 18.68 mm 3 . CBD was prevalent in 137 teeth and the mean BPBH appeared to be 9.45 mm. The presence of a missed canal (OR = 10.022, P < .05), underfilled canal (OR = 3.725, P < .05), overfilled canal (OR = 15.859, P = .018), and perforation (OR = 15.261, P = .013) was significantly associated with PLs. None of the prognostic factors could considerably contribute to the CBD (P > .05). The presence of a missed canal was positively associated with the PL volume (P < .05). Similarly, missed canals (P < .05), perforation (P < .05), and separated instruments (P = .004) were associated with a significantly reduced BPBH., Conclusions: Overfillings, perforations, missed canals, and underfillings were identified as remarkable predictors of PL, arranged in descending order of their respective impact. The only factor capable of significantly increasing the PL volume was the missed canal. In brief, obturation length errors, perforations, missed canals, and separated instruments were robustly correlated with endodontic failure, which highlights the importance of mitigating the potential for errors by following the fundamentals of endodontics., (© 2023. The Author(s).)

Introduction: Endodontic therapy has been regarded as a safe treatment option with highly promising results in preserving natural teeth. Numerous factors may influence the longevity of endodontically treated teeth (ETT), thus altering their success/survival rate. This study aimed to determine the survival and success rates of endodontically treated premolars and molars with different complex restorative/prosthodontic treatments., Materials and Methods: A total of 190 patients with an ETT were included, who had received final coronal restoration up to 14 days after the temporary one and at least one year prior to the enrollment. The investigator evaluated the quality of endodontic filling, coronal restoration, mobility, and proximal contacts. Data were analyzed with multiple binary logistic regression and the Chi-Square test., Results: The average duration of follow-up was 28.6±11.9 months. Overall, 89.4% (170/190) of the teeth survived. The overall success rate for the investigated teeth was 70.5% (134/190). Success rates of 100% for crown, 95.7% for post and core crown (PCC), and 94.7% for amalgam build-up with post were achieved. However, the success rates were 75%, 52.5%, and 50% for amalgam build-up, composite build-up, and PCC with crown lengthening, respectively. The Chi-square test revealed that there was a significant difference between the different restorations in terms of success ( P <0.001). Multiple binary logistic regression models revealed that coronal leakage ( P =0.048), obturation void ( P =0.037), obturation length ( P =0.020), mobility ( P =0.002), type of the restoration ( P <0.001), and proximal contact ( P <0.001) were significant predictors for success. However, apical lucency, root length, marginal caries, tooth type, and post did not appear to be significant indicators of success ( P >0.05)., Conclusions: ETT with minimal mobility, exhibiting underfilled obturations without visible voids, and having received crown/PCC/amalgam build-up with a post, along with the presence of both proximal contacts, tend to exhibit a significantly high success rate., Competing Interests: None.

Introduction: One of the most common problems in endodontic treatments is post-treatment pain, and sealers might be one of the factors influencing the degree of pain following root canal therapy. The purpose of this study is to compare pain following endodontic treatment using an AH-26 resin sealer against the Resil experimental sealer in mandibular molars with irreversible pulpitis., Materials and Methods: One hundred patients with irreversible pulpitis in the mandibular first or second molar were randomly divided into two groups ( n =50) based on the type of sealer applied. Two postgraduate students with at least five years of experience treated all patients. All patients had a single root canal treatment. Postoperative pain scores and analgesic consumption were assessed after 6, 12, 24, and 48 hours and 3, 4, 5, 6, and 7 days after the treatment. The data were statistically analyzed by Fisher's exact or Chi-Square test (to compare the distribution of qualitative variables in two groups), repeated measures ANOVA (to compare changes in pain intensity over time in two groups), Boneferronie (for pairwise comparisons), Friedman, Wilcoxon and Mann-Whitney tests (for assessment of the changes in pain scores over time). The generalized estimating equations (GEE) were used for assessing time and group effects., Results: There was no significant difference in postoperative pain between groups at any of the time points studied ( P >0.05), and also for patient analgesic consumption between groups ( P >0.05). Both groups recorded the maximum pain levels in the first 6 hours. For each subsequent day postoperatively, the odds ratio (OR) of not using analgesics was 2.078., Conclusion: Resil and AH-26 perform similarly in terms of the occurrence and intensity of postoperative pain in mandibular molar teeth with irreversible pulpitis., Competing Interests: None.

Objectives: To evaluate a modified two-step buccal infiltration (MBI) of 1.7 mL 4% articaine as primary or supplemental anesthesia in mandibular first and second molars diagnosed with symptomatic irreversible pulpitis (SIP)., Materials and Methods: One hundred and eight patients with SIP were randomly assigned to one of three groups (n = 36). They were given an inferior alveolar nerve block (IANB) of 2% lidocaine with 1:80.000 epinephrine or a primary MBI of 4% articaine with 1:100.000 epinephrine in the IANB and MBI groups, respectively. Patients in the IANB + MBI group received an IANB followed by an MBI. Pain levels during the injection, access cavity preparation, and initial filing were recorded on the Heft-Parker visual analog scale (HP-VAS). No or mild pain (HP-VAS ≤ 54) upon access cavity preparation and initial filing was considered a success. Chi-square and Kruskal-Wallis tests were used to analyze the data., Results: MBI (77.8%) and IANB + MBI (94.4%) had both significantly higher success rates than IANB (50.0%) (P < .001). However, when the Bonferroni adjustment was applied, there was no statistically significant difference between the MBI and IANB + MBI techniques (P = .041 > .017). MBI was associated with significantly less injection pain than IANB (P < .001)., Conclusions: Both primary and supplemental MBI with 4% articaine were superior to IANB with 2% lidocaine in mandibular first and second molars diagnosed with SIP. Further research may be needed to confirm the findings of this study., Clinical Relevance: The findings of this study suggest that supplemental or primary MBI can be a clinically viable alternative to IANB, which has a relatively low success rate when managing mandibular molars diagnosed with SIP., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Materials and Methods: In this randomized clinical trial, 64 patients who had mandibular first and second molars with irreversible pulpitis were randomly divided into two groups ( n  = 32) by stratified permuted block randomization. The experimental group used 60 mg KTP every 6 hours, and the control group received 400 mg ibuprofen tablets every 6 hours for 1 day. The severity of pain experienced by patients was quantified before and at 2, 4, 8, 12, 24, and 48 hours after endodontic treatment, using the numerical rating scale (NRS). Data were analyzed by using the t -test, Mann-Whitney test, and generalized estimating equation (GEE) (alpha = 0.05)., Results: The pain score was not significantly different between the two groups at the baseline or any other postoperative time point ( P > 0.05). The reduction in the pain score was significant in both groups from 2 to 10 hours and 10 to 48 hours, postoperatively ( P < 0.001). The interaction effect of time and group was not significant on the postoperative pain score in the abovementioned time intervals, and the pattern of pain reduction was the same over time in both groups ( P > 0.05)., Conclusion: Both KTP and ibuprofen effectively decreased postendodontic pain. Considering the comparable pattern of pain reduction, KTP can be used as an alternative to ibuprofen tablets for effective pain control after endodontic treatment of mandibular first and second molars with irreversible pulpitis., Competing Interests: The authors declare that they have no conflicts of interest regarding the publication of this article., (Copyright © 2023 Saeede Zadsirjan et al.)

Objective: The management of postoperative endodontic pain (PEP) is essential to contemporary endodontic practice. Diclofenac and ibuprofen (IBU) are two of the most widely-used non-steroidal anti-inflammatory analgesics. However, their comparative data are neither sufficient nor conclusive. This prospective randomised clinical trial aimed to compare the analgesic efficacy of diclofenac potassium (DFK) with IBU on PEP in maxillary and mandibular first molars diagnosed with irreversible pulpitis after single-visit non-surgical root canal treatment., Methods: Sixty-four patients were randomised into two groups of DFK (n=32) and IBU (n=32), using the stratified permuted randomisation method, and 61 participants completed the trial. After root canal treatment, patients randomly received IBU 400 mg every 6 hours (n=31) or DFK 50 mg every 8 hours (n=30) for 24 hours. Patients recorded their pain level on 0-100 mm visual analogue scales (VAS) at 2, 4, 6, 12, and 24 hours after the treatment. Recorded VAS scores and the number of pain-free patients (VAS<5) were compared between the two groups. A generalised linear estimation equation model, Chi-Square test, and Mann-Whitney U test were used to analyse the data., Results: The mean overall PEP score was statistically significantly lower in the DFK group than the IBU group with a p value of 0.030. Pain scores at 2 (p=0.034), 4 (p=0.021), and 24 hours (p=0.042) after the treatment were also significantly lower for DFK than IBU. The number of pain-free patients was also significantly higher in the DFK group at 2-hour (p=0.015) and 4-hour (p=0.048) time points and overall (p=0.013) compared to the IBU group. There was no adverse effect observed in either group., Conclusion: Based on the results, taking multi-dose DFK 50 mg by the clock had better analgesic outcomes than multi-dose IBU 400 mg for PEP management. (EEJ-2022-01-07).

Introduction: This study compared the cleaning effectiveness of NeoNiTi, 2Shape and Revo&#95;S rotary instruments., Materials and Methods: Fifty mandibular molar mesial roots were selected with an angle of curvature less than 20 degrees divided into three groups ( n =15). Five samples were selected as negative control group. In all three systems, the final file was 25, 6%. The score of debris and smear layer in three thirds (coronal, middle and apical) of the root canal walls were evaluated using scanning electron microscopic (SEM) magnification. The data were analyzed using the Kruskal Wallis and Mann Whitney U tests for intergroup comparison ( P ≤0.05) and Freidman and Wilcoxon signed-rank test was employed for intragroup comparison ( P ≤0.05)., Results: Residual debris of the 2Shape system in the apical region was significantly higher than the other two systems ( P =0.039). Revo&#95;S and 2Shape groups had significantly higher quantities of debris in the apical than the coronal region ( P =0.029 and P =0.02, respectively). In the 2Shape group, the amount of mid-region debris was significantly higher ( P =0.005) than the coronal. In inter-group comparison there was no significant difference in residual smear layer between the systems. In intra-group comparison in all three systems, the amount of smear layer in the coronal third was significantly higher than in the other two areas. ( P =0.017, P <0.001 and P =0.032, respectively)., Conclusion: 2Shape left the highest amount of debris in the apical region. The amount of debris in Revo&#95;S and 2Shape groups in the apical region was significantly higher than in the coronal. The amount of smear layer in all three groups in the coronal area was higher than the middle and apical areas., Competing Interests: ‘None declared’.

Introduction: Nano-technology applied for the local delivery of different agents and/or drugs has made its path to endodontics. In the current study, the antibacterial efficacy of biopolymer-coated ceramic microparticles loaded with a modified combination of triple antibiotics, i.e. Penicillin G, Metronidazole and Ciprofloxacin (PMC), was evaluated against two strains of Enterococcus faecalis ( E . faecalis ); a standard clinical strain obtained from previously root-filled teeth with persistent periapical lesions, and compared to the most common antimicrobials used in endodontics., Methods and Materials: After synthesis of the polymer-coated microparticles loaded with antibiotics, the 21-day release of antibiotics were evaluated and a stock solution was produced using the maximum released amount of drugs and distilled water. The antibacterial activity of PMC, triple antibiotic paste (TAP), calcium hydroxide (CH), chlorhexidine (CHX) and sodium hypochlorite (NaOCl) against two bacterial strains was determined using "Minimum Inhibitory Concentration" and "Agar Diffusion Test". Additionally, "Microtiter Plate Assay" was performed to assess anti-biofilm properties., Results: Minimum inhibitory concentration values reported for TAP and PMC were 1/256. PMC showed the maximum diameter of growth inhibition in both strains (33 mm and 35 mm), while CH had the minimum diameters (13 mm and13 mm). Based on microtiter plate assay, TAP showed higher biofilm formation than PMC. Biofilm formation was higher in the standard strain for PMC; however, NaOCl, CHX and CH completely inhibited biofilm formation., Conclusions: Based on the findings of the present study, it could be concluded that PMC and TAP were the most effective medicaments against E . faecalis in its planktonic form; however, none could inhibit its biofilm formation. Further studies using larger sample size and "Confocal Scanning Laser Microscopy" are recommended., Competing Interests: ‘None declared’.

Introduction: This study aimed to compare the accuracy and agreement between cone-beam computed tomography (CBCT) and micro-computed tomography (micro-CT) in the assessment of canal transportation and centering ratio following root canal instrumentation with rotary files., Material and Methods: Twenty mesiobuccal canals of mandibular molars were prepared using the 2Shape sequential rotary system. CBCT and micro-CT scans were performed before and after instrumentation, and the magnitude of transportation and centering ratio were measured. The acceptable transportation was set at ≤0.15 mm. The accuracy and agreement between CBCT and micro-CT were calculated, and the intra-class correlation coefficient (ICC) and kappa coefficient were determined to assess the agreement between the two modalities. Statistical analyses were performed using repeated measures ANOVA., Results: Transportation was detected by both modalities at all distances from the apex after instrumentation. The agreement between CBCT and micro-CT in assessing canal transportation was observed in 80%, 85%, 75%, and 75% of specimens at 1-, 3-, 5-, and 7-mm from the apex, respectively. The ICC for transportation and centering ratio was much lower than 0.75, indicating poor agreement between the modalities. The kappa coefficient did not show acceptable agreement between the methods., Conclusions: CBCT and micro-CT demonstrated poor agreement in assessing canal transportation and centering ratio. Micro-CT remains the preferred modality for in vitro investigations, while CBCT should be limited to clinical settings., Competing Interests: ‘None declared’.

Background: To compare the anesthetic efficacy of supplemental buccal infiltration (BI) (1.7 ml) versus intraligamentary (IL) injection containing 0.4 ml of 4% articaine with 1:100.000 epinephrine after an inferior alveolar nerve block (IANB) with 1.7 ml 2% lidocaine in the first and second mandibular molars diagnosed with irreversible pulpitis (IP)., Methods: One hundred subjects diagnosed with IP of either the mandibular first (n = 50) or second molars (n = 50) and failed profound anesthesia following an IANB were selected. They randomly received either the IL or BI techniques of anesthesia. Pain scores on a 170 mm Heft-Parker visual analog scale were recorded initially, before, and during supplemental injections. Furthermore, pulse rate was measured before and after each supplemental injection. During the access cavity preparation and initial filing, no or mild pain was assumed to indicate anesthetic success. The chi-square test, Mann-Whitney U test, and independent samples t-test were used for the analyses., Results: The overall success rates were 80% in the IL group and 74% in the BI group, with no significant difference (P = 0.63). In the first molars, there was no significant difference between the two techniques (P = 0.088). In the second molars, IL injection resulted in a significantly higher success rate (P = 0.017) than BI. IL injection was statistically more successful (P = 0.034) in the second molars (92%) than in the first molars (68%). However, BI was significantly more successful (P = 0.047) in the first molars (88%) than in the second molars (64%). The mean pulse rate increase was significantly higher in the IL group than in the BI group (P < 0.001)., Conclusions: Both the IL and BI techniques were advantageous when used as supplemental injections. However, more favorable outcomes were observed when the second molars received IL injection and the first molars received BI., Competing Interests: DECLARATION OF INTEREST: The authors disclaim any potential conflicts of interest in relation to this study., (Copyright © 2022 Journal of Dental Anesthesia and Pain Medicine.)

Background: Conflicting findings on the potency of antibiotic pastes versus calcium hydroxide (CH) have been evident in the literature., Aims: To compare the antibacterial efficacy of single antibiotic paste (SAP), double antibiotic paste (DAP), triple antibiotic paste (TAP), and modified TAP (mTAP) with CH on bacterial biofilms., Methods: PubMed, Scopus, and Embase were comprehensively searched until August 23, 2021. The study protocol was registered in the PROSPERO. Ex vivo studies performed on Enterococcus faecalis or polymicrobial biofilms incubated on human/bovine dentin were selected. The quality of the studies was assessed using a customized quality assessment tool. Standardized mean difference (SMD) with a 95% confidence interval (CI) was calculated for the meta-analysis. Meta-regression models were used to identify the sources of heterogeneity and to compare the efficacy of pastes., Results: The qualitative and quantitative synthesis included 40 and 23 papers, respectively, out of 1421 search results. TAP (SMD = -3.82; CI, -5.44 to -2.21; P < 0.001) and SAPs (SMD = -2.38; CI, -2.81 to - 1.94; P < 0.001) had significantly higher antibacterial efficacy compared to the CH on E. faecalis biofilm. However, no significant difference was found between the efficacy of DAP (SMD = -2.74; CI, -5.56-0.07; P = 0.06) or mTAP (SMD = -0.28; CI, -0.82-0.26; P = 0.31) and CH. Meta-regression model on E. faecalis showed that SAPs have similar efficacy compared to TAP and significantly better efficacy than DAP. On dual-species (SMD = 0.15; CI, -1.00-1.29; P = 0.80) or multi-species (SMD = 0.23; CI, -0.08-0.55; P = 0.15) biofilms, DAP and CH had similar efficacy., Conclusions: Ex vivo evidence showed that antibiotic pastes were either superior or equal to CH. The studied SAPs had considerably higher or similar antibacterial effectiveness compared to DAP, CH, and TAP. Hence, combined antibiotic therapy was not necessarily required for root canal disinfection ex vivo ., Competing Interests: There are no conflicts of interest., (Copyright: © 2022 Journal of Conservative Dentistry.)

Introduction: This study investigated the amount of debris and smear layer remaining followed chemomechanical preparation using three systems: ProTaper Universal, reciprocating SafeSider, and hand K-Flexofiles with scanning electron microscope (SEM)., Materials and Methods: Sixty-five mandibular molars with mesiobuccal canal curvature (25 to 40 ° ) were extracted and divided into one control group ( n =5), and three experimental groups ( n =20) according to the preparation method; K-Flexofile, ProTaper Universal and SafeSider instruments. All canals were irrigated with 3 ml of 5.25% sodium hypochlorite solution and 3 mL of 17% EDTA. Subsequently, the canals were irrigated with 5 ml of normal saline. Then the teeth were examined under the scanning electron microscope (SEM). Kruskal-Wallis, Dunn-Q Bonferroni, and Friedman tests were used for statistical analysis of results., Results: To assess the accumulation of debris, statistically significant differences were observed only in the coronal area among ProTaper Universal, SafeSider, K-Flexofile, and the control group. ( P =0.029). To evaluate the residual smear layer amount, statistically significant differences were observed only in the coronal and middle areas, following the preparation of the canals using ProTaper Universal, SafeSider, and hand K-Flexofiles and control groups ( P =0.019)., Conclusions: Based on the present in vitro study, we can declare that the canals were utterly cleaned of debris and smear layer in none of the groups. Manual Flexofile and ProTaper Universal groups result in cleaner canal walls than reciprocal SafeSider, in the coronal and middle thirds., Competing Interests: ‘None declared’.

Introduction: Pulp sensitivity tests are commonly used for assessment of pulp vitality. However, indirect assessment of pulp vitality by evaluation of nerve response and subjective nature are the main limitations of these tests. Pulse oximetry is used for assessment of blood oxygen saturation in medicine, and its efficacy for assessment of pulp vitality needs to be evaluated., (This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Objective: Streptococcus mutans is one of the principal causative agents of dental caries (tooth decay) found in the oral cavity. Therefore, this study investigates whether selenium nanoparticles (SeNPs) enhance the efficacy of photodynamic therapy (PDT) against both planktonic communities and the one-day-old biofilm of S. mutans. In this study, the planktonic and 24-h biofilm of S. mutans have been prepared in 96-cell microplates. These forms were treated by methylene blue (MB) and SeNPs and then were exposed to light-emitting diode (LED) lighting. Finally, the results have been reported as CFU/ml., Results: The outcomes demonstrated that MB-induced PDT and SeNPs significantly reduced the number of planktonic bacteria (P-value < 0.001). The comparison between the treated and untreated groups showed that combining therapy with SeNPs and PDT remarkably decreased colony-forming units of one-day-old S. mutans biofilm (P-value < 0.05). The findings revealed that PDT modified by SeNPs had a high potential to destroy S. mutans biofilm. This combination therapy showed promising results to overcome oral infection in dental science., (© 2022. The Author(s).)

Aims: A glide path is created prior to root canal instrumentation by nickel-titanium (NiTi) rotary files to increase the efficiency and safety of cleaning and shaping. This study aimed to assess root canal transportation in use of different glide path files in curved canals., Materials and Methods: 30 sound mesiobuccal root canals of mandibular molars with 20° to 40° curvature were selected and randomly assigned to 3 groups of EdgeGlidePath (EGP, EdgeEndo), One-G (Micro-Mega), and Neolix (Neoniti). The specimens were scanned before and after glide path creation by microcomputed tomography (micro-CT). The pre- and postoperative micro-CT scans were superimposed, and the degree of canal transportation and centering ratio were measured at 1, 3, 5, and 7 mm distances from the apical foramen. Statistical Analysis . The data were analyzed by two-way and one-way ANOVA., Results: The effects of distance from the apical foramen and instrument type and the interaction effect of the two were not significant on the centering ability of the files or canal transportation., Conclusion: EdgeGlidePath, One-G, and Neolix files fabricated from the conventional NiTi alloy or heat-treated M-Wire alloy showed similar performance regarding centering ability and canal transportation in glide path preparation in curved canals., Competing Interests: The authors declare no conflicts of interest., (Copyright © 2021 Shiva Shojaeian et al.)

Background: Selenium Nanoparticles (SeNPs) were reported as an agent that may enhance the effectiveness of Photodynamic Antimicrobial Chemotherapy (PACT). This in vitro study evaluates the effect of SeNPs on the efficacy of Methylene Blue (MB)-induced PACT against the biofilm formated in 96-well plates and the dentine tubule biofilm of Enterococcus faecalis., Methods: Chitosan coated SeNPs were synthesized using chemical reduction method and were characterized by Transmission Electron Microscope (TEM) and Dynamic Light Scattering (DLS). Twenty-four-hour biofilms of E. faecalis were developed on 96-well plates and treated with SeNPs, MB, and Light-Emitting Diode (LED). Also, three-week biofilms of E. faecalis were formed on 67 specimens of dentinal tubules, and the antibacterial effects of MB+SeNPs on these biofilms were studied., Results: The average hydrodynamic diameter of SeNPs was 80/3 nm according to DLS measurement. The combined use of MB and SeNPs significantly reduced Colony-Forming Units (CFUs) of one-day-old E. faecalis biofilms in comparison with the control group (P value < 0.05). Besides, combination therapy had the most antibacterial effect on root canal E. faecalis biofilms at both 200 and 400 µm depths of dentine tubules (P value < 0.001). Of note, about 50% of human fibroblast cells survived at a concentration of 128 µg/ml of SeNPs, compared to the control group., Conclusion: The results demonstrated that the photodynamic therapy modified by SeNPs could be an effective disinfection alternative to the destruction of E. faecalis biofilms and root canal treatment., (Copyright © 2021. Published by Elsevier B.V.)

The objective of the current study was to compare the anaesthetic efficacy of supplemental intraligamentary (IL) injection of 4% articaine with that of 2% lidocaine in the mandibular first and second molars with irreversible pulpitis after an ineffective inferior alveolar nerve block injection (IANB) using the same anaesthetic in a randomised triple-blind clinical trial. Seventy-six adult patients, who were diagnosed with irreversible pulpitis in the mandibular first or second molars, were divided into 2 groups and received IANB randomly. In patients with lip numbness, anaesthesia was evaluated with the cold and electrical pulp (EPT) tests, and if the reported number on EPT was below 100, supplemental IL injection was administered using the same anaesthetic. The teeth were retested after 5 minutes. The Heft-Parker visual analogue scale was used to evaluate pain after IANB and IL injections. Statistical analysis was performed using repeated measures ANOVA, chi-square, and independent-sample and paired-sample t -tests. The results showed that there was no significant difference in the success rates of supplemental IL and IANB injections between articaine and lidocaine. Furthermore, there was no significant difference in the success rates of supplemental IL injection with lidocaine between the mandibular first and second molars. However, there was a significant difference in the success rates of supplemental IL injection with articaine between the mandibular first and second molars. Moreover, supplemental IL injections indicated no significant difference in the anaesthetic efficacy between articaine and lidocaine; nevertheless, they were more effective in the mandibular second molars, especially with articaine., Competing Interests: The authors declare that there are no conflicts of interest regarding the publication of this paper., (Copyright © 2021 Nazanin Zargar et al.)

Objective: A systematic review and meta-analysis were conducted to determine whether there are postoperative pain differences resulting from rotary and reciprocation engine-driven instrumentation motions in non-surgical endodontic treatment or retreatment at 12, 24, and 48 hours., Methods: Four electronic databases (PubMed, Embase, Cochrane Library, and Scopus) were searched to identify randomised controlled trials that compared the effects of rotary and reciprocating instrumentation motions on postoperative pain. Two authors independently screened the search results, extracted the data, and assessed the quality using the Cochrane risk of bias tool. Due to numerous variables across studies, the random effect inverse variance method for meta-analysis was applied. When significant heterogeneity among studies was present, the random effects multi-variable meta-regression analysis was performed to determine the source of heterogeneity., Results: At all time intervals, the incidence of postoperative pain was higher in the reciprocating instrumentation group, but was not statistically significant. There was no significant difference in the analgesic intake between groups. Meta-regression analysis determined study population sizes as a significant heterogeneous factor, while significance was not observed for preoperative pain or the pulpal diagnosis., Conclusion: There was no difference in postoperative pain at 12, 24, and 48 hours after non-surgical root canal treatment and retreatment, using reciprocating or rotary instrumentation motions.

Euphorbia kopetdaghi grows wild in the Northeast parts of Iran. Phytochemical study of its aerial parts led to the isolation of two undescribed cyclomyrsinol macrocyclic diterpenes with a new tetrahydrofuran oxidation pattern containing a hemiacetal group named: kopetdaghinane A and B. The structure of the isolated compounds was elucidated by extensive spectroscopic methods. Cytotoxic activity of kopetdaghinane A was evaluated using standard MTT assay against MCF-7 breast cancer and OVCAR-3 ovary cells. HUVEC cells were used as a normal cell line for calculation of the selectivity index. The MTT showed cyclomyrsinol diterpene has a significant cytotoxic effect with good selectivity indexes against both cell lines but with more selectivity against MCF-7 cells. Apoptosis induction by cyclomyrsinol treatment was confirmed by annexin V-FITC/PI staining, and caspase-6 activation. Western blot analysis showed that the expression of Bcl-2 was noticeably decreased in response to kopetdaghinane A treatment, while the expression of Bax protein was increased. Moreover, the apoptotic effect of cyclomyrsinol was shown to be related to ROS production, and loss of mitochondrial membrane potential (ΔΨm). Taken together, these results showed that kopetdaghinane A inhibits the growth of MCF-7 breast cancer cells through the activation of the mitochondrial apoptotic pathway and may be considered as an investigational compound in breast cancer preclinical study., Competing Interests: Declaration of Competing Interest I hereby also certify that I have no financial conflict connected to this article. The funding source supporting the work was acknowledged in the paper. No potential conflict of interest declared by any other authors involved in this work. Compliance with Ethics in Investigations has been applied in this work., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Objectives: The aim of this study was to evaluate the composition of microbiota of irreversible pulpitis and primary endodontic infections with respect to clinical and radiographic findings by performing cultures and 16s rDNA sequencing in Iranian patients., Material and Methods: In this prospective cross-sectional study, samples were collected from 41 root canals for 4 main groups of patients. Bacterial identification was performed by the polymerase chain reaction (PCR) and 16s rDNA sequencing of aerobic and anaerobic cultivable colonies taken from patients' culture plates. Additionally, the presence of 13 bacterial species and 3 nonbacterial species was also explored using PCR and species-specific primers., Results: Sixteen microbial species, 1 fungus (Candida albicans), and 1 virus (Herpes simplex virus) were discovered and isolated. Species with the highest prevalence were Dialister invisus (68.3%), Porphyromonas gingivalis (58.8%), Streptococcus salivarius (58.5%), and Treponema denticola (56.1%). Lysinibacillus fusiformis (19.1%) was detected in the root canals for the first time. Candida albicans was seen in 11 cases (26.8%). Herpes simplex virus (HSV) was seen in 4 patients (9.8%)., Conclusions: Our results suggest that Gram-negative anaerobic oral bacteria are the majority of the microbes in primary endodontic infections. Various combinations of bacterial species were related to different clinical and radiographic conditions. Lysinibacillus fusiformis was detected for the first time in primary endodontic infections., Clinical Relevance: The results of this investigation might help clinicians choose to identify suspected endodontic pathogens in the etiology of each form of pulpal and periradicular diseases to determine the best therapeutic measures.

Objectives: This study aimed to assess the effect of DentalVibe on the level of pain experienced during anesthetic injections using 2 different techniques., Materials and Methods: This randomized crossover clinical trial evaluated 60 patients who required 2-session endodontic treatment. Labial infiltration (LI) anesthesia was administered in the anterior maxilla of 30 patients, while inferior alveolar nerve block (IANB) was performed in the remaining 30 patients. 1.8 mL of 2% lidocaine was injected at a rate of 1 mL/min using a 27-gauge needle. DentalVibe was randomly assigned to either the first or second injection session. A visual analog scale was used to determine participants' pain level during needle insertion and the anesthetic injection. The paired t -test was applied to assess the efficacy of DentalVibe for pain reduction., Results: In LI anesthesia, the pain level was 12.0 ± 15.5 and 38.1 ± 21.0 during needle insertion and 19.1 ± 16.1 and 48.9 ± 24.6 during the anesthetic injection using DentalVibe and the conventional method, respectively. In IANB, the pain level was 14.1 ± 15.9 and 35.1 ± 20.8 during needle insertion and 17.3 ± 14.2 and 39.5 ± 20.8 during the anesthetic injection using DentalVibe and the conventional method, respectively. DentalVibe significantly decreased the level of pain experienced during needle insertion and the anesthetic injection in anterior LI and mandibular IANB anesthesia., Conclusions: The results suggest that DentalVibe can be used to reduce the level of pain experienced by adult patients during needle insertion and anesthetic injection., Competing Interests: Conflict of Interest: No potential conflict of interest relevant to this article was reported, (Copyright © 2019. The Korean Academy of Conservative Dentistry.)

Background and Objectives: Bacterial agents are commonly accepted as the main etiology of endodontic infections. A significant proportion of oral bacteria cannot be cultured using existing methods. Since diversity and abundance of bacterial species are different in different populations, the present study was aimed to identify effective microorganisms in persistent endodontic infections in Iranian patients based on culture and molecular biology methods using sequence analysis of 16S rDNA gene., Materials and Methods: Thirty patients with previous failure of endodontic treatment were enrolled in the study. After isolation and disinfection of the tooth surrounding area with 3% sodium hypochlorite and 30% hydrogen peroxide, sampling from the root canals was carried out using two sterile Hedstrom files and two sterile paper points, and then the specimens were transferred to the microbiology laboratory in thioglycolate transport medium so that they undergo aerobic-anaerobic culture, PCR, and 16S rDNA gene sequencing., Results: Of 30 patients (15 women and 15 men), 15 patients had radiographic lesions smaller than 5 mm and other 15 patients had radiographic lesions larger than 5 mm. The mean age of patients was 40.20 ± 13.76 years. A total of 26 patients were asymptomatic. Only four patients had clinical signs such as pain and percussion sensitivity and Tannerella forsythia was the most common bacterium found in this group of patients. 13 bacterial species were found in 11 different genus, one virus strain and one fungus strain. From 30 studied specimens, Enterococcus faecalis was the most common microorganism with prevalence rate of 63.63%., Conclusion: This study showed the type and prevalence of effective bacteria in secondary/persistent endodontic infections in Iranian patients. E. faecalis is the most commonly found microorganism in Iranian patients.

This study compared the antibacterial effect of 2% clindamycin and 2% and 100% concentration of triple antibiotic paste (TAP) on an Enterococcus faecalis biofilm. Dentinal tubules of 100 root specimens were infected and randomly assigned to five groups. A total of 1000 mg mL -1 of TAP, 20 mg mL -1 of TAP and clindamycin, calcium hydroxide or methylcellulose (control) were placed in the root canal for 1 week. After treatment, dentine shavings were collected from 200 and 400 μm dentine depth and the number of colony-forming units (CFU) per mg was determined. Reduction in viable bacteria in first three groups was significantly better than calcium hydroxide and control groups. However, the antimicrobial effectiveness among these three groups was not significantly different from each other. There was no significant difference between data at 200 and 400 μm in all groups except the Ca(OH) 2 group. The antibiofilm effect of clindamycin was comparable with TAP, so it may be used instead of TAP., (© 2018 Australian Society of Endodontology Inc.)

Background: All surgical meshes entering the U.S. market have been cleared for clinical use by the 510(k) process of the Food and Drug Administration (FDA), in which devices simply require proof of "substantial equivalence" to predicate devices, without the need for clinical trials. However, recalled meshes associated with adverse effects may, indirectly, continue to serve as predicates for new devices raising concerns over the safety of the 510(k) route., Methodology: Here we assess the potential magnitude of this problem by determining the ancestral network of equivalence claims linking recently cleared surgical meshes. Using the FDA website we identified all surgical meshes cleared by the 510(k) route between January 2013 and December 2015 along with all listed predicates for these devices. Using a network approach, we trace the ancestry of predicates across multiple generations of equivalence claims and identify those meshes connected to devices that have since recalled from the market along with the reason for their recall., Conclusions: We find that the 77 surgical meshes cleared between 2013 and 2015 are based on 771 interconnected predicate claims of equivalence from 400 other devices. The vast majority of these devices (97%) are descended from only six surgical meshes that were present on the market prior to 1976. One of these ancestral meshes alone, provided the basis of 183 subsequent devices. Furthermore, we show that 16% of recently cleared devices are connected through equivalence claims to the 3 predicate meshes that have been recalled for design and material related flaws causing serious adverse events. Taken together, our results show that surgical meshes are connected through a tangled web of equivalency claims and many meshes recently cleared by the FDA have connections through chains of equivalency to devices which have been recalled from the market due to concerns over clinical safety. These findings raise concerns over the efficacy of the 510(k) route in ensuring patient safety., Competing Interests: The authors have declared that no competing interests exist.

Background: Retearing after rotator cuff surgery is a major clinical problem. Numerous scaffolds are being used to try to reduce retear rates. However, few have demonstrated clinical efficacy. We hypothesize that this lack of efficacy is due to insufficient mechanical properties. Therefore, we compared the macro and nano/micro mechanical properties of 7 commercially available scaffolds to those of the human supraspinatus tendons, whose function they seek to restore., Methods: The clinically approved scaffolds tested were X-Repair, LARS ligament, Poly-Tape, BioFiber, GraftJacket, Permacol, and Conexa. Fresh frozen cadaveric human supraspinatus tendon samples were used. Macro mechanical properties were determined through tensile testing and rheometry. Scanning probe microscopy and scanning electron microscopy were performed to assess properties of materials at the nano/microscale (morphology, Young modulus, loss tangent)., Results: None of the scaffolds tested adequately approximated both the macro and micro mechanical properties of human supraspinatus tendon. Macroscale mechanical properties were insufficient to restore load-bearing function. The best-performing scaffolds on the macroscale (X-Repair, LARS ligament) had poor nano/microscale properties. Scaffolds approximating tendon properties on the nano/microscale (BioFiber, biologic scaffolds) had poor macroscale properties., Conclusion: Existing scaffolds failed to adequately approximate the mechanical properties of human supraspinatus tendons. Combining the macroscopic mechanical properties of a synthetic scaffold with the micro mechanical properties of biologic scaffold could better achieve this goal. Future work should focus on advancing techniques to create new scaffolds with more desirable mechanical properties. This may help improve outcomes for rotator cuff surgery patients., (Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Annealing, or heat treatment, has traditionally been used as a treatment to improve the strength and stiffness of electrospun materials. Understanding the extent to which annealing can improve the mechanical properties and alter the degradation rate of electrospun polydioxanone filaments could influence the range of its potential clinical applications. In this study, we investigated the effect of annealing electrospun polydioxanone filaments at varying times and temperatures and subsequently subjecting them to in vitro degradation in phosphate buffer saline for up to 6 weeks. Fibre alignment, tensile strength and thermal properties were assessed. It was determined that annealing at 65°C for 3h only marginally improved the tensile strength (9±2%) but had a significant effect on reducing strain and rate of degradation, as well as maintaining fibre alignment within the filament. The filament retained significantly more of its force at failure after 4 weeks (82±15%, compared to 61±20% for non annealed filaments) and after 6 weeks of degradation (81±9%, compared to 55±13% for non annealed filaments). Conversely, annealing filaments at 75°C improved the initial tensile strength of the filament (17±6%), but over 6 weeks, both samples annealed at 75°C and 85°C otherwise performed similarly or mechanically worse than those not annealed. These findings suggest that annealing at low temperatures is more useful as a method to tailor degradation rate than to improve mechanical properties. The ability to modulate the degradation profile with annealing may become useful to tailor the properties of electrospun materials without altering the chemistry of the polymer used. This might better match the degradation of the implant and gradual loss of mechanical properties with the new matrix deposition within the structure, enabling multiple regenerative strategies within a single biomaterial system., (Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The healing process of ruptured tendons is suboptimal, taking months to achieve tissue with inferior properties to healthy tendon. Mechanical loading has been shown to positively influence tendon healing. However, high frequency low magnitude (HFLM) loads, which have shown promise in maintaining healthy tendon properties, have not been studied with in vitro injury models. Here, we present and validate an in vitro scratch tendon tissue injury model to investigate effects of HFLM loading on the properties of injured rat tail tendon fascicles (RTTFs). A longitudinal tendon tear was simulated using a needle aseptically to scratch a defined length along individual RTTFs. Tissue viability, biomechanical, and biochemical parameters were investigated before and 7 days after culture . The effects of static, HFLM (20 Hz), and low frequency (1 Hz) cyclic loading or no load were also investigated. Tendon viability was confirmed in damaged RTTFs after 7 days of culture, and the effects of a 0.77 ± 0.06 cm scratch on the mechanical property (tangent modulus) and tissue metabolism in damaged tendons were consistent, showing significant damage severity compared with intact tendons. Damaged tendon fascicles receiving HFLM (20 Hz) loads displayed significantly higher mean tangent modulus than unloaded damaged tendons (212.7 ± 14.94 v 92.7 ± 15.59 MPa), and damaged tendons receiving static loading (117.9 ± 10.65 MPa). HFLM stimulation maintained metabolic activity in 7-day cultured damaged tendons at similar levels to fresh tendons immediately following damage. Only damaged tendons receiving HFLM loads showed significantly higher metabolism than unloaded damaged tendons (relative fluorescence units -7021 ± 635.9 v 3745.1 ± 641.7). These validation data support the use of the custom-made in vitro injury model for investigating the potential of HFLM loading interventions in treating damaged tendons.

Introduction: One of the main goals of endodontic treatment is to decrease the harboring bacteria within the root canal system and dentinal tubules. This experimental study attempted to investigate the antibacterial efficacy of three root canal irrigants in the presence and absence of smear layer (SL)., Methods and Materials: A total of 210 sound extracted human single-rooted teeth were prepared. After creating the SL and its removal in half of the samples, they were infected with Candida albicans (C. albicans) and Actinomyces israelii (A. israelii). A total of 180 specimen were used to assess the antimicrobial efficacy of the three irrigants in presence and absence of SL, 24 specimen were placed in the positive and negative controls, 2 samples were utilized for scanning electron microscopy (SEM) analysis and 2 were used for Gram staining. Then, they were exposed to irrigants including 2.61% sodium hypochlorite (NaOCl), 0.2% chlorhexidine gluconate (CHX) and 1% povidone-iodine (PI) for 5, 30 and 60 min. Presence/absence of test microorganisms was determined by incubation of specimens in test tubes containing brain-heart infusion (BHI) broth and then measuring the colony forming units (CFU) on BHI agar. A cumulative logistic model was used to analyze the ordinal response., Results: The 2.61% solution of NaOCl was significantly more effective than 0.2% CHX and the latter was more efficient than 1% PI for decreasing fungal and microbial infection of dentinal tubules in the presence and absence of SL., Conclusion: The presence of smear layer decreased the efficacy of antimicrobial irrigants. The minimum time required for elimination of fungal/microbial infection was 30 min.

Soft tissue injuries represent a substantial and growing social and economic burden. Medical fibres are commonly used to repair these injuries during surgery. Patient's outcomes are, however, not promising with around 40% of surgical repairs failing within the first few months after surgery due to poor tissue regeneration. The application of nanofibrous filaments and yarns as medical fibres and scaffolds has been suggested to improve soft tissue regeneration and enhance the quality of the repair. However, due to a lack of robustness and reliability of the current fabrication methods, continuous nanofibrous filaments cannot be manufactured and scaled up in industrial settings and are not currently available for clinical use. We have developed a robust and automated method that enables the manufacture of continuous electrospun filaments and which has the potential to be integrated into existing textile production lines. The technology uses a wire guide to form submicrofibres in a dense, narrow mesh which can be detached as a long and continuous thread. The thread can then be stretched and used to create multifilament yarns which can imitate the hierarchical architecture of tissues such as tendons and ligaments. Electrospun polydioxanone yarns produced by this method showed improved cellular proliferation and adhesion when compared to medical monofilament fibres in current clinical use. In vivo, the electrospun yarns showed a good safety profile with mild foreign body reaction and complete degradation within 5 months after implantation. These results suggest that this filament collection method has the potential to become a useful platform for the fabrication of future medical textiles.

Unlabelled: High initial fixation strength, mechanical stability and biological healing of the tendon-to-bone interface are the main goals after rotator cuff repair surgery. Advances in the understanding of rotator cuff biology and biomechanics as well as improvements in surgical techniques have led to the development of new strategies that may allow a tendon-to-bone interface healing process, rather than the formation of a fibrovascular scar tissue. Although single-row repair remains the most cost-effective technique to address a rotator cuff tear, some biological intervention has been recently introduced to improve tissue healing and clinical outcome of rotator cuff repair. Animal models are critical to ensure safety and efficacy of new treatment strategies; however, although rat shoulders as well as sheep and goats are considered the most appropriate models for studying rotator cuff pathology, no one of them can fully reproduce the human condition. Emerging therapies involve growth factors, stem cells and tissue engineering. Experimental application of growth factors and platelet-rich plasma demonstrated promising results, but has not yet been transferred into standardized clinical practice. Although preclinical animal studies showed promising results on the efficacy of enhanced biological approaches, application of these techniques in human rotator cuff repairs is still very limited. Randomized controlled clinical trials and post-marketing surveillance are needed to clearly prove the clinical efficacy and define proper indications for the use of combined biological approaches. The following review article outlines the state of the art of rotator cuff repair and the use of growth factors, scaffolds and stem cells therapy, providing future directions to improve tendon healing after rotator cuff repair., Level of Evidence: Expert opinion, Level V.

Objective: To examine the effects of foot reflexology massage on anxiety in patients following CABG surgery., Methods: In this randomized controlled trial, 80 patients who met the inclusion criteria were conveniently sampled and randomly allocated to the experimental and control groups after they were matched on age and gender. On the days following surgery, the experimental group received foot reflexology massage on their left foot 20 min a day for 4 days, while the control group was given a gentle foot rub with oil for one minute. Anxiety was measured using the short-form of the Spielberger State-Trait Anxiety Inventory and the Visual Analogue Scale-Anxiety., Results: Both measurement instruments confirmed a significant decrease in anxiety following the foot reflexology massage., Conclusion: The significant decrease in anxiety in the experimental group following the foot reflexology massage supports the use of this complementary therapy technique for the relief of anxiety., (Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.)

The standard treatment of congenital diaphragmatic hernia is by open operation. We have successfully performed a laparoscopic repair in an asymptomatic 2-year-old child. We recommend this as a safe alternative treatment modality in diaphragmatic hernias presenting past infancy. The role of laparoscopic correction in the newborn period, however, remains to be determined.