Search

International audience; The paper presents an analysis of disruptions occurring during JET-ILW plasma operations covering the period from the start of ILW (ITER-like wall) operation up to completion of JET operation in 2016. The total number of disruptions was 1951 including 466 with deliberately induced disruptions. The average rate of unintended disruptions was 16.1 %, which is significantly above the ITER target at 15 MA. The pre-disruptive plasma parameters are: plasma current Ip = (0.82-3.38) MA, toroidal field BT = (0.98-3.4) T, safety factor q95 = (1.52-9.05), plasma internal inductance li = (0.58-1.86), Greenwald density limit fraction FGWL = (0.04-1.61), with 720 X-point plasma pulses from a subset of 1420 unintended disruption shots. Massive gas injection (MGI) has been routinely used in protection mode both to terminate pulses when the plasma is at risk of disruption and to mitigate against disruption effects. The MGI was mainly triggered by the n = 1 locked mode (LM) amplitude exceeding a threshold or by the disruption itself, namely, either dIp/dt (specifically, a fast drop in Ip) or the toroidal loop voltage exceeding threshold values. For mitigation purposes, only the LM was used as a physics precursor and threshold on the LM signal was used to trigger the MGI prior to disruption. Long lasting LM (? 100 ms) do exist prior to disruption in 75% of cases. However, 10% of non-disruptive pulses have a LM which eventually vanished without disruption. The plasma current quench (CQ) may result in 3D configurations, termed as asymmetrical disruptions, which are accompanied by sideways forces. Unmitigated vertical displacement events (VDEs) generally have significant plasma current toroidal asymmetries. Unmitigated non-VDE disruptions also have large plasma current asymmetries presumably because there is no plasma vertical position control during the CQ and so they too are subject to large vertical displacements. MGI is a reliable tool to mitigate 3D effects and correspondingly sideways forces during the CQ. The vessel structure loads depend on the force impulse and force time behaviour, including their rotation. The toroidal rotation of 3D configuration may cause resonance with the natural frequencies of the vessel components in large tokamaks such as ITER. The JET-ILW amplitude-frequency interdependence of toroidal rotation of 3D configurations is presented.

Asymmetrical disruptions may occur during ITER operation and they may be accompanied by large sideways forces and rotation of the asymmetry. This is of particular concern because resonance of the rotating asymmetry with the natural frequencies of the vacuum vessel (and other in-vessel components) could lead to large dynamic amplification of the forces. A significant fraction of non-mitigated JET disruptions have toroidally asymmetric currents that flow partially inside the plasma and partially inside the surrounding vacuum vessel ('wall'). The toroidal asymmetries (otherwise known as the appearance of 3D structures) are clearly visible in the plasma current (Ip) and the first plasma current moments. For the first time we present here the asymmetries in toroidal flux measured by the diamagnetic loops and also propose a physical interpretation. The presented data covers the period of JET operation with a C-wall (JET-C from 2005 until late 2009) and with an ITER-like wall (JET-ILW from 2011 until late 2014), during which pick-up coil and saddle loop data at four toroidally orthogonal locations were routinely recorded. The observed rotations of the Ip asymmetries are in the range from -5 turns to +10 turns (a negative value is counted to the negative plasma current). Initial observations on COMPASS of asymmetric disruptions are presented, which are in line with JET data. The whole of the JET-ILW disruption database and the limited number of COMPASS disruptions examined confirm that the development of the toroidal asymmetry precedes the drop to unity of q95. It is shown that massive gas injection (MGI), which is routinely used to mitigate disruptions, significantly reduces the Ip asymmetries in JET. However, MGI produces fast plasma current quench and consequently high vessel eddy currents, which expose the machine to additional stresses. The effect of the large gas quantity used during the injection is of particular concern as well.