Search

Modern bioeconomy and sustainability demands lead food technology in the development of novel biobased edible food preservatives. Herein, the development and characterization of novel polysaccharide (xanthan gum and kappa-carrageenan)-based nanoemulgels (NGs) enhanced with essential oil derivatives; pure citral (CT); pure carvacrol (CV); and various CT:CV ratios (25:75, 50:50, and 75:25) are presented. The obtained NGs are applied as active edible coatings for extending the shelf life of Protected Designation of Origin (PDO) green table olives of Chalkidiki. The zeta potential demonstrated the high stability of the treatments, while light scattering measurement and scanning electron microscopy images confirmed the <100 nm droplet size. EC 50 indicated high antioxidant activity for all the tested samples. The fractional inhibitory concentration (FIC) confirmed the synergistic effect of NG with a CT:CV ratio at 50:50 against Staphylococcus aureus and at CT:CV ratios 25:75 and 75:25 against E. coli O157:H7. NG coatings with CT:CV ratios at 50:50 and at 25:75 effectively controlled the weight loss at 0.5%, maintained stable pH levels, and preserved the visual quality of green olives on day 21. The synergistic effect between CT and CV was confirmed as they reduced the spoilage microorganisms of yeasts and molds by 2-log [CFU/g] compared to the control and almost 1 log [CFU/g] difference from pure CT and CV-based NGs without affecting the growth of beneficial lactic acid bacteria crucial for fermentation. NGs with CT:CV ratios at 50:50 and at 25:75 demonstrated superior effectiveness in preventing discoloration and maintaining the main sensory attributes. Overall, shelf life extension was achieved in 21 compared to only 7 of the uncoated ones. Finally, this study demonstrates the potential of polysaccharide-based NGs in mixtures of CT and CV for the shelf life extension of fermented food products.

Enhancing food preservation and safety using environmentally friendly techniques is urgently needed. The aim of this study was to develop food packaging films using biodegradable poly-L-lactic acid (PLA) as biopolymer and carvacrol (CV) essential oil as an antioxidant/antibacterial agent for the replacement of chemical additives. CV was adsorbed onto natural zeolite (NZ) via a new vacuum adsorption method. The novel nanohybrid CV@NZ with a high CV content contained 61.7%wt. CV. Pure NZ and the CV@NZ nanohybrid were successfully dispersed in a PLA/triethyl citrate (TEC) matrix via a melt extrusion process to obtain PLA/TEC/xCV@NZ and PLA/TEC/xNZ nanocomposite films with 5, 10, and 15%wt CV@NZ or pure NZ content. The optimum resulting film PLA/TEC/10CV@NZ contained 10%wt. CV@NZ and exhibited self-healable properties, 22% higher tensile strength, 40% higher elongation at break, 45% higher water barrier, and 40% higher oxygen barrier than the pure PLA/TEC matrix. This film also had a high CV release content, high CV control release rate as well as 2.15 mg/L half maximal effective concentration (EC50) and 0.27 mm and 0.16 mm inhibition zones against Staphylococcus aureus and Salmonella enterica ssp. enterica serovar Typhimurium, respectively. This film not only succeeded in extending the shelf life of fresh minced pork, as shown by the total viable count measurements in four days but also prevented the lipid oxidation of fresh minced pork and provided higher nutritional values of the minced meat, as revealed by the heme iron content determination. It also had much better and acceptable sensory characteristics than the commercial packaging paper.

In the current study, the synthesis of hydroxyapatite-ceria (HAP-CeO 2 ) scaffolds is attempted through a bioinspired chemical approach. The utilized colloidal CeO 2 suspension presents antifungal activity against the Aspergillus flavus and Aspergillus fumigatus species at concentrations higher than 86.1 ppm. Three different series of the composite HAP-CeO 2 suspensions are produced, which are differentiated based on the precursor suspension to which the CeO 2 suspension is added and by whether this addition takes place before or after the formation of the hydroxyapatite phase. Each of the series consists of three suspensions, in which the pure ceria weight reaches 4, 5, and 10% (by mass) of the produced hydroxyapatite, respectively. The characterization showed that the 2S series's specimens present the greater alteration towards their viscoelastic properties. Furthermore, the 2S series's sample with 4% CeO 2 presents the best mechanical response. This is due to the growth of needle-like HAP crystals during lyophilization, which-when oriented perpendicular to the direction of stress application-enhance the resistance of the sample to deformation. The 2S series's scaffolds had an average pore size equal to 100 μm and minimum open porosity 89.5% while simultaneously presented the lowest dissolution rate in phosphate buffered saline.

Nowadays, increased food safety and decreased food waste are two of the major global interests. Self-healable active packaging materials are an attractive option to achieve such targets. This property is critical for the hygiene and the consumption appropriateness of the food. Polylactic acid is a very promising polymeric matrix that potentially could replace the widely used low-density polyethylene due to its biobased origin and its easy biodegradable nature. The main drawback of this polymeric matrix is its brittle, fragile nature. On the other hand, tetraethyl citrate is a biobased approved food additive which became an attractive option as a plasticizer for industries seeking alternative materials to replace the traditional petrochemically derived compounds. A novel biobased film exhibiting self-healing behavior suitable for food-active packaging was developed during this study. Polylactic acid's brittleness was reduced drastically by incorporating tetraethyl citrate, and a random cut on the original self-repairing film was fully healed after 120 s. The optimum concentration of tetraethyl citrate in the polylactic acid was around 15% v / w with a water/oxygen barrier close to the relevant of polylactic acid and low migration. According to the EC 50 parameter, the antioxidant activity was 300% higher than the relevant of pure polylactic acid, while according to the thiobarbituric acid and heme iron parameters, the film resisted lipid oxidation and deterioration. Finally, the total viable count parameter indicates the strong antimicrobial activity of this sample.

The use of natural raw substances for food preservation could provide a great contribution to food waste reduction, circular economy enhancement, and green process application widening. Recent studies indicated that the use of porous materials as adsorbents for natural essential oils provided nanohybrids with excellent antioxidant and antimicrobial properties. Following this trend in this work, a thymol oil (TEO) rich SBA-15 nanohybrid was prepared and characterized physiochemically with various techniques. This TEO@SBA-15 nanohybrid, along with the pure SBA-15, was extruded with low-density polyethylene (LDPE) to develop novel active packaging films. Results indicated that TEO loading was higher than other porous materials reported recently, and the addition of both pure SBA-15 and TEO@SBA-15 to the LDPE increased the water/oxygen barrier. The film with the higher thyme-oil@SBA-15 nanohybrid content exhibited a slower release kinetic. The antioxidant activity of the final films ignited after 48 h, was in the range of 60-70%, and was almost constant for 7 days. Finally, all tests indicated a sufficient improvement by the addition of thyme-oil@SBA-15 nanohybrids in the pure LDPE matrix and the concentration of wt. 10% of such nanocarriers provided the optimum final LDPE/10TEO@SBE-15 active packaging film. This material could be a potential future product for active packaging applications.

Carvacrol is well documented for its antibacterial and antioxidant effects. However, its high volatility has directed researchers toward nanoencapsulation technology according to bioeconomy and sustainability trends. This study examined and compared free carvacrol (FC), carvacrol microemulsion (MC), carvacrol microemulsion busted with chitosan (MMC), and carvacrol nanoemulsions (NC) as active coatings on extending minced pork meat shelf life at 4 ± 1 °C for 9 days, focusing on microbiological, physiochemical, and sensory characteristics. The research involved pre-characterizing droplet sizes, evaluating antioxidants, and determining antibacterial efficacy. The results demonstrated that NC with a 21 nm droplet size exhibited the highest antioxidant and antibacterial activity. All coatings succeeded in extending the preservation of fresh minced pork meat in comparison to the free carvacrol sample (FC). The NC coating showed the highest extension of minced pork meat preservation and maintained meat freshness for 9 days, with a lower TBARs of 0.736 mg MDA/Kg, and effectively reduced mesophilic, lactic acid, and psychotrophic bacterial counts more significantly by 1.2, 2, and 1.3 log, respectively, as compared to FC. Sensory assessments confirmed the acceptability of NC and MCC coatings. Overall, the carvacrol-based nanoemulsion can be considered a novel antioxidant and antimicrobial active coating due to its demonstrated higher efficacy in all the examined tests performed.

Chondroitin sulfate (ChS), chitosan (Chi), and fish gelatin (FG), which are byproducts of a fish-treatment small enterprise, were incorporated with glycerol (Gly) to obtain dense hydrogel membranes with reduced brittleness, candidates for dressing in wound healing applications. The mechanical properties of all samples were studied via Dynamic Mechanical Analysis (DMA) and tensile tests while their internal structure was characterized using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) and X-ray Diffraction (XRD) instruments. Their surface morphology was analyzed by ThermoGravimetric Analysis (TGA) method, while their water permeability was estimated via Water Vapor Transmission Rate (WVTR) measurements. Wettability and degradation rate measurements were also carried out. Characterization results indicated that secondary interactions between the natural polymers and the plasticizer create the hydrogel membranes. The samples were amorphous due to the high concentration of plasticizer and the amorphous nature of the natural polymers. The integration of ChS led to decreased decomposition temperature in comparison with the glycerol-free sample, and all the materials had dense structures. Finally, the in vitro endothelial cell attachment studies indicate that the hydrogel membranes successfully support the attachment and survival of primary on the hydrogel membranes and could be appropriate for external application in wound healing applications as dressings.

We report the synthesis of three (3) linear triblock terpolymers, two (2) of the ABC type and one (1) of the BAC type, where A, B and C correspond to three chemically incompatible blocks such as polystyrene (PS), poly(butadiene) of exclusively (~100% vinyl-type) -1,2 microstructure (PB 1,2 ) and poly(dimethylsiloxane) (PDMS) respectively. Living anionic polymerization enabled the synthesis of narrowly dispersed terpolymers with low average molecular weights and different composition ratios, as verified by multiple molecular characterization techniques. To evaluate their self-assembly behavior, transmission electron microscopy and small-angle X-ray scattering experiments were conducted, indicating the effect of asymmetric compositions and interactions as well as inversed segment sequence on the adopted morphologies. Furthermore, post-polymerization chemical modification reactions such as hydroboration and oxidation were carried out on the extremely low molecular weight PB 1,2 in all three terpolymer samples. To justify the successful incorporation of -OH groups in the polydiene segments and the preparation of polymeric brushes, various molecular, thermal, and surface analysis measurements were carried out. The synthesis and chemical modification reactions on such triblock terpolymers are performed for the first time to the best of our knowledge and constitute a promising route to design polymers for nanotechnology applications.

A new era is rising in food packaging and preservation, with a consequent focus on transition to "greener" and environmentally friendly techniques. The environmental problems that are emerging nowadays impose use of natural materials for food packaging applications, replacement of chemical preservatives with natural organic extractions, such as essential oils, and targeting of new achievements, such as further extension of food shelf-life. According to this new philosophy, most of the used materials for food packaging should be recyclable, natural or bio-based, and/or edible. The aim of this work was to investigate use and efficiency of a novel food packaging developed based on commercial LDPE polymer incorporated with natural material halloysite impregnated with natural extract of thyme oil. Moreover, a direct correlation between the stiff TBARS method and the easiest heme iron measurements method was scanned to test food lesions easier and faster. The result of this study was development of the LDPE/10TO@HNT film, which contains the optimum amount of a hybrid nanostructure and is capable to be used as an efficient active food packaging film. Furthermore, a linear correlation seems to connect the TBARS and heme iron measurements.

This study presents, the development of a green method to produce rich in thymol natural zeolite (TO@NZ) nanostructures. This material was used to prepare sodium-alginate/glycerol/xTO@NZ (ALG/G/TO@NZ) nanocomposite active films for the packaging of soft cheese to extend its shelf-life. Differential scanning calorimetry (DSC), X-ray analysis (XRD), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR) instruments were used for the characterization of such nanostructures and films, to identify the thymol adsorbed amount, to investigate the thermal behaviour, and to confirm the dispersion of nanostructure powder into the polymer matrix. Water vapor transmission rate, oxygen permeation analyzer, tensile measurements, antioxidant measurements, and antimicrobial measurements were used to estimate the film's water and oxygen barrier, mechanical properties, nanostructure's nanoreinforcement activity, antioxidant and antimicrobial activity. The findings from the study revealed that ALG/G/TO@NZ nanocomposite film could be used as an active packaging film for foods with enhanced, mechanical properties, oxygen and water barrier, antioxidant and antimicrobial activity, and it is capable of extending food shelf-life.

This work reports the design and fabrication of novel printed single-wall carbon nanotube (SWCNT) electrothermal Joule heating devices. The devices are directly deposited on unidirectional (UD) glass fiber (GF) fabrics. The GF-SWCNT Joule heaters were integrated during manufacturing as "system" plies in carbon fiber reinforced polymer (CFRP) composite laminates. Specific secondary functions were imparted on the composite laminate endowing thus a multifunctional character. The efficient out-of-oven curing (OOC) of a CFRP laminate was demonstrated using a sandwich configuration comprising top/bottom GF-SWCNT system plies. A total power consumption of ca. 10.5 kWh for the efficient polymerization of the thermoset matrix was required. Infrared thermography (IR-T) monitoring showed a uniform and stable temperature field before and after impregnation with epoxy resin. Quasi-static three-point bending and dynamic mechanical analysis (DMA) revealed a minor knock-down effect of the OOC-CFRP laminates properties compared to oven cured CFRPs, whereas the glass transition temperature ( T g ) was almost identical. The OOC-CFRP laminates were efficient in providing additional functions such as deicing and self-sensing that are highly sought in the energy and transport sectors, i.e., wind turbine blades or aircraft wings. The novel modular design provides unique opportunities for large-area applications via multiple interconnected arrays of printed devices.

An innovative process for the adsorption of the hydrophobic Basil-Oil (BO) into the hydrophilic food byproduct chitosan (CS) and the development of an advanced low-density polyethylene/chitosan/basil-oil (LDPE/CS&#95;BO) active packaging film was investigated in this work. The idea of this study was the use of the BO as both a bioactive agent and a compatibilizer. The CS was modified to a CS&#95;BO hydrophobic blend via a green evaporation/adsorption process. This blend was incorporated directly in the LDPE to produce films with advanced properties. All the obtained composite films exhibited improved packaging properties. The film with 10% CS&#95;BO content exhibited the best packaging properties, i.e., 33.0% higher tensile stress, 31.0% higher water barrier, 54.3% higher oxygen barrier, and 12.3% higher antioxidant activity values compared to the corresponding values of the LDPE films. The lipid oxidation values of chicken breast fillets which were packaged under vacuum using this film were measured after seven and after fourteen days of storage. These values were found to be lower by around 41% and 45%, respectively, compared with the corresponding lipid oxidation values of pure LDPE film.

In the present study we explore the extracellular matrix (ECM) produced by human bone marrow mesenchymal stem/stromal cells (BM-MSCs) induced to undergo osteogenic differentiation within porous chitosan/gelatin (CS:Gel) scaffolds by investigating their multiple gene expression profile and mechanical behavior. Initially, the efficiency of the BM-MSCs osteogenic differentiation within the constructs was confirmed by the significant rise in the expression of the osteogenesis associated genes DLX5, RUNX2, ALP and OSC. In line with these findings, OSC and Col1A1 protein expression was also detected in BM-MSCs on the CS:Gel scaffolds at day 14 of osteogenic differentiation. We then profiled, for the first time, the expression of 84 cell adhesion and ECM molecules using PCR arrays. The arrays, which were conducted at day 14 of osteogenic differentiation, demonstrated that 49 genes including collagens, integrins, laminins, ECM proteases, catenins, thrombospondins, ECM protease inhibitors and cell-cell adhesion molecules were differentially expressed in BM-MSCs seeded on scaffolds compared to tissue culture polystyrene control. Moreover, we performed dynamic mechanical analysis of the cell-loaded scaffolds on days 0, 7 and 14 to investigate the correlation between the biological results and the mechanical behavior of the constructs. Our data demonstrate a significant increase in the stiffness of the constructs with storage modulus values of 2 MPa on day 7, compared to 0.5 MPa on day 0, following a drop of the stiffness at 0.8 MPa on day 14, that may be attributed to the significant increase of specific ECM protease gene expression such as MMP1, MMP9, MMP11 and MMP16 at this time period.

The synthesis, molecular and morphological characterization of a 3-miktoarm star terpolymer of polystyrene (PS, M¯n = 61.0 kg/mol), polybutadiene (PB, M¯n = 38.2 kg/mol) and polyisoprene (PI, M¯n = 29.2 kg/mol), corresponding to volume fractions (φ) of 0.46, 0.31 and 0.23 respectively, was studied. The major difference of the present material from previous ABC miktoarm stars (which is a star architecture bearing three different segments, all connected to a single junction point) with the same block components is the high 3,4-microstructure (55%) of the PI chains. The interaction parameter and the degree of polymerization of the two polydienes is sufficiently positive to create a three-phase microdomain structure as evidenced by differential scanning calorimetry and transmission electron microscopy (TEM). These results in combination with small-angle X-ray scattering (SAXS) and birefringence experiments suggest a cubic tricontinuous network structure, based on the I4 1 32 space group never reported previously for such an architecture.

Block copolymers (BCPs), through their self-assembly, provide an excellent guiding platform for precise controlled localization of maghemite nanoparticles (MNPs). Diblock copolymers (di/BCP) represent the most applied matrix to host filler components due to their morphological simplicity. A series of nanocomposites based on diblock copolymer or triblock terpolymer matrices and magnetic nanoparticles were prepared to study and compare the influence of an additional block into the BCP matrix. MNPs were grafted with low molecular weight polystyrene (PS) chains in order to be segregated in a specific phase of the matrix to induce selective localization. After the mixing of the BCPs with 10% w / v PS- g -MNPs, nanocomposite thin films were formed by spin coating. Solvent vapor annealing (SVA) enabled the PS- g -MNPs selective placement within the PS domains of the BCPs, as revealed by atomic force microscopy (AFM). The recorded images have proven that high amounts of functionalized MNPs can be controllably localized within the same block (PS), despite the architecture of the BCPs (AB vs. ABC). The adopted lamellar structure of the "neat" BCP thin films was maintained for MNPs loading approximately up to 10% w/v, while, for higher content, the BCP adopted lamellar morphology is partially disrupted, or even disappears for both AB and ABC architectures.

Despite the anticancer potential of natural products (NPs), their limited bioavailability necessitates laborious derivatization or covalent conjugation to delivery vehicles. To unleash their potential, we developed a nanohybrid delivery platform with a noncovalently tunable surface. Initially, the active compound was encapsulated in a macrocycle, p -sulfonatocalix[4]arene, enabling a 62 000-fold aqueous solubility amplification as also a 2.9-fold enhancement in its cytotoxicity with respect to the parent compound in SW-620 colon cancer cells. A pH stimuli responsive behavior was recorded for this formulate, where a programmable release of quercetin from the macrocycle was monitored in an acidic environment. Then, a nanoparticle gold core was decorated with calixarene hosts to accommodate noncovalently NPs. The loaded nanocarrier with the NP quercetin dramatically enhanced the cytotoxicity (>50-fold) of the parent NP in colon cancer and altered its cell membrane transport mode. In vivo experiments in a mouse 4T1 tumor model showed a reduction of tumor volume in mice treated with quercetin-loaded nanoparticles without apparent toxic effects. Further analysis of the tumor-derived RNA highlighted that treatment with quercetin-loaded nanoparticles altered the expression of 27 genes related to apoptosis.

This paper presents an innovative approach, which enables control of the mechanical properties of metallic components by external stimuli to improve the mechanical behavior of aluminum structures in aeronautical applications. The approach is based on the exploitation of the shape memory effect of novel Shape Memory Alloy (SMA) coatings deposited on metallic structural components, for the purpose of relaxing the stress of underlying structures by simple heating at field-feasible temperatures, therefore enhancing their structural integrity and increasing their stiffness and rigidity while allowing them to withstand expected loading conditions safely. Numerical analysis provided an insight in the expected response of the SMA coating and of the SMA-coated element, while the dependence of alloy composition and heat treatment on the experienced shape memory effect were investigated experimentally. A two-phase process is proposed for deposition of the SMA coating in an order that induces beneficial stress relaxation to the underlying structure through the shape memory effect.

Background: Previous investigations in leukoreduced units of red blood cells (RBCs) in mannitol additive solution revealed the close association of uric acid (UA) levels in vivo with the susceptibility of RBCs to storage lesion markers. In this study, we examined whether UA has a similar correlation with the capability of RBCs to cope with the oxidative provocations of storage under different conditions, namely, in CPDA-1 and in the absence of leukoreduction., Study Design and Methods: The UA-dependent antioxidant capacity of the supernatant was measured in nonleukoreduced units of RBCs in CPDA (n = 47). The possible effect of UA variability on the storage lesion profile was assessed by monitoring several physiologic properties of RBCs and supernatant, including cell shape, reactive oxygen species, and size distribution of extracellular vesicles, in units exhibiting the lowest or highest levels of UA activity (n = 16) among donors, throughout the storage period., Results: In stored RBC units, the UA-dependent antioxidant activity of the supernatant declined as a function of storage duration but always in strong relation to the UA levels in fresh blood. Contrary to units of poor-UA activity, RBCs with the highest levels of UA activity exhibited better profile of calcium- and oxidative stress-driven modifications, including a significant decrease in the percentages of spherocytes and of 100- to 300-nm-sized vesicles, typically associated with the exovesiculation of stored RBCs., Conclusion: The antioxidant activity of UA is associated with donor-specific differences in the performance of RBCs under storage in nonleukoreduced CPDA units., (© 2017 AABB.)

This study reports on the fabrication of magnetically responsive hollow titania capsules by confining the superparamagnetic Fe(3)O(4) nanoparticles within a hollow and porous titania (TiO(2)) shell. The employed protocol involves precipitation of titania shell on the magnetite (Fe(3)O(4)) encapsulated polystyrene beads followed by the calcination of resulting composite particles at elevated temperature. Scanning electron microscopy and transmission electron microscopy reveal the presence of a thick, complete but irregular titania shell on the magnetic polystyrene beads after the templating process. Electron energy loss mapping image analysis has been employed to investigate the spatial distribution of titania and magnetite phases of magnetic hollow titania capsules (MHTCs). Magnetic characterization indicates that both titania-coated magnetic polystyrene beads (TMPBs) and MHTCs are superparamagnetic in nature with the saturated magnetizations of 5.6 and 8.1 emu/g, respectively. X-ray diffraction (XRD) analysis reveals that titania shell of these capsules is composed of photoactive anatase phase. Nitrogen adsorption-desorption analysis has been employed to estimate the specific surface area and the average pore diameter of the fabricated hollow structures. Photocatalytic activity of the fabricated MHTCs for the photodegradation of rhodamine 6G dye has been demonstrated and compared with that of bulk titania nanoparticles.

We investigate in a hybrid material the interactions existing between magnetic nanoparticles of gamma-Fe(2)O(3) and the polymer matrix constituted by core-shell poly(N-isopropylacrylamide-sodium acrylate) microgels. These interactions provoke the shifting of the microgel volume phase transition to higher temperatures when the amount of gamma-Fe(2)O(3) increases. The study was performed using different techniques such as incoherent quasi-elastic neutron scattering (IQNS), infrared spectroscopy (FTIR-ATR), and dynamic light scattering (DLS). Below the low critical solution temperature (LCST) of the polymer, the IQNS data confirm that the presence of inorganic nanoparticles affects the PNIPAM chain motions. Thus, in the swollen state both the mean-square displacement of the polymer segments and the diffusive motion of the polymer chains decrease as the iron oxide content increases. The FTIR-ATR study indicates that the reduction of vibrational and diffusional motions of the polymer chains is due to the formation of hydrogen bonds between the amide groups of the polymer matrix and the OH groups of the magnetic nanoparticles. The creation of this hybrid complex would explain the reduction of the swelling capacity with increasing the iron content in the microgels. Furthermore, this interaction could also explain the shift of the polymer LCST to higher temperatures as due to the extra energy required by the system to break the hydrogen bonds prior to the PNIPAM collapse.

A novel and versatile approach for the mixing of ZnO nanofillers into a host polymer matrix, poly(ethyl methacrylate) (PEMA), is reported. Firstly, ZnO nanoparticles are deposited onto the surface of polystyrene (PS) colloidal particles in a "raspberry-like" fashion and subsequently obtained PS/ZnO composite particles are mixed into the PEMA matrix in the range of 0.5 to 5 wt.-%. Microscopic analyses reveal a homogenous distribution of PS/ZnO domains into the PEMA matrix even at 5 wt.-% loading level. Thermogravimetric analysis and differential scanning calorimetry results indicate an improvement in thermal stability of PEMA matrix after mixing with PS/ZnO filler particles. A significant enhancement in mechanical properties of PEMA matrix in the presence of PS/ZnO particles has been evidenced by dynamic mechanical analysis and three point bending measurements., (Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Fabrication of organic-inorganic composite particles with tailored size, shape, and morphology has been attracting great attention from researchers because of their fascinating properties and applications in a variety of potential fields. In this study, we report on the fabrication of PS-In(OH)(3) (polystyrene-indium hydroxide) composite particles by hydrolyzing the In(OC(3)H(7))(3) (indium isopropoxide) salt in the presence of beta-diketone functionalized PS colloidal particles. A systematic investigation of the employed reaction conditions allowed us to tune the morphology, size, and In(OH)(3) content of the PS-In(OH)(3) composite particles. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results illustrate that variation in the employed concentration of the In(OC(3)H(7))(3) salt in reaction media can effectively tune the morphology of resulting composite particles between "core-shell" and "raspberry-like". X-ray diffraction (XRD) analysis confirms the phase purity of In(OH)(3) nanoparticles precipitated on the surface of PS beads. Colloidal stability of the composite particles has been found to be reduced with increasing the deposited amount of In(OH)(3) nanoparticles. Thermogravimetric analysis (TGA) suggests a continuous increase in the deposited amount of In(OH)(3) nanoparticles with increasing concentration of In(OC(3)H(7))(3) salt in reaction media. The resulting PS-In(OH)(3) composite particles are envisioned to be used in a myriad of potential applications including fabrication of optoelectronic devices, absorption/separation supporting material, catalysts, and hydrophobic surfaces.

The effect of annealing on the miscibility and phase behavior of Sorona {poly(trimethylene terephthalate), PTT} and bisphenol A polycarbonate (PC) blends was examined. These blends exhibited heterogeneous phase-separated morphology and two well-spaced glass transition temperatures (Tgs) indicating immiscibility. The Sorona/PC blends were thermally annealed at 260 degrees C for different times to induce various extents of transreactions between the two polymers. After annealing at high temperature the original two Tgs of blends were found to merge into one single Tg, exhibiting a homogeneous morphology. It is interesting to note that upon extended annealing the original semicrystalline morphology transformed into an amorphous nature. This is attributed to chemical transreactions between the PTT and PC chain segments as evidenced with FTIR, DSC, DMA, 1H NMR, and WAXS measurements. A new characteristic aryl C-O-C vibration band present at 1070 cm(-1) in the FTIR spectra of the annealed blends indicated the formation of an aromatic polyester structure due to the transreactions between PTT and PC. The sequence structures of the produced copolyesters were determined by a NMR triad analysis, which showed that the randomness increased with time of heating. WAXS analysis confirmed that the PTT/PC blends completely lost their crystallinity when annealed at 260 degrees C for a period of 120 min or longer, indicating the formation of fully random copolyesters. A random copolymer formed as a result of the transreactions between PTT and PC serves as a compatibilizer at the beginning, and upon extended annealing this became the main species of the system which is finally transformed to a homogeneous and amorphous phase.

In the present study, we report a method for preparing a fluorescent thermosensitive hybrid material based on monodisperse, thermosensitive poly( N-isopropyl acrylamide) (PNIPAM) microgels covered with CdTe nanocrystals of 3.2 nm diameter. The CdTe nanocrystals were covalently immobilized on the surface of PNIPAM microgels. The chemical environment around the CdTe nanocrystals was modified by changing the temperature and inducing the microgel volume-phase transition. This change provoked a steep variation in the nanocrystal photoluminescence (PL) intensity in such a way that when the temperature was under the low critical solution temperature (LCST) of the polymer (36 degrees C) the PL of the nanocrystals was strongly quenched, whereas above the LCST the PL intensity was restored.

Sub-micrometer-sized hollow tantalum oxide (Ta2O5) spheres with tunable shell thickness and void size have been fabricated exploiting beta-diketone-functionalized polystyrene (PS) beads as sacrificial templates in a sol-gel process. First, a controlled precipitation of Ta2O5 nanoparticles was carried out on the template surface by hydrolyzing tantalum ethoxide (Ta(OEt)5) at room temperature, and subsequently, the polymer core was removed either via chemical treatment with toluene or calcination at 650 degrees C. The thickness of the tantala shell precipitated on the PS core during the coating process was tuned between 100 and 142 nm by varying the concentration of tantala precursor in the reaction media. The obtained Ta2O5-coated PS particles and hollow microspheres were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. Due to the unique optical and dielectric properties, these nanostructured materials are envisaged to be used in applications such as novel building blocks for the fabrication of advanced materials, surface coatings, catalysts, and drug delivery systems.

In the present study we report a facile and reproducible method of preparing magnetic thermosensitive hybrid material based on P(NIPAM) microgels covered with gamma-Fe2O3 nanoparticles of 6-nm size. The iron oxide nanoparticles provided magnetic response to the microgels. In addition, the presence of the magnetic nanoparticles on the microgels altered their swelling behavior and shifted their volume phase transition temperature to higher values. In particular, for inorganic shells with 18% (w/w) of magnetic nanoparticles the volume phase transition of the microgels was shifted from 36 to 40 degrees C. In contrast, for shells consisting of 38% (w/w) magnetic nanoparticles the volume phase transition of the microgels was almost blocked, thus indicating that the microgel thermal response was strongly affected by the presence of the inorganic nanoparticles. The synthesized thermosensitive magnetic microgels are envisaged to be ideal for potential applications as thermosensitive targeted drug delivery systems.

New hybrid nanocomposites based on a methacrylate functionalized titanium-oxo cluster as nano-cross-linker show improved mechanical properties, optical transparency and photochromic activity.