Search

Materials that simultaneously exhibit permanent porosity and high-temperature magnetic order could lead to advances in fundamental physics and numerous emerging technologies. Herein, we show that the archetypal molecule-based magnet and magnonic material V(TCNE)2 (TCNE = tetracyanoethylene) can be desolvated to generate a room-temperature microporous magnet. The solution-phase reaction of V(CO)6 with TCNE yields V(TCNE)2·0.95CH2Cl2, for which a characteristic temperature of T* = 646 K is estimated from a Bloch fit to variable-temperature magnetization data. Removal of the solvent under reduced pressure affords the activated compound V(TCNE)2, which exhibits a T* value of 590 K and permanent microporosity (Langmuir surface area of 850 m2/g). The porous structure of V(TCNE)2 is accessible to the small gas molecules H2, N2, O2, CO2, ethane, and ethylene. While V(TCNE)2 exhibits thermally activated electron transfer with O2, all the other studied gases engage in physisorption. The T* value of V(TCNE)2 is slightly modulated upon adsorption of H2 (T* = 583 K) or CO2 (T* = 596 K), while it decreases more significantly upon ethylene insertion (T* = 459 K). These results provide an initial demonstration of microporosity in a room-temperature magnet and highlight the possibility of further incorporation of small-molecule guests, potentially even molecular qubits, toward future applications.

Carbon capture at fossil fuel-fired power plants is a critical strategy to mitigate anthropogenic contributions to global warming, but widespread deployment of this technology is hindered by a lack of energy-efficient materials that can be optimized for CO2 capture from a specific flue gas. As a result of their tunable, step-shaped CO2 adsorption profiles, diamine-functionalized metal-organic frameworks (MOFs) of the form diamine-Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) are among the most promising materials for carbon capture applications. Here, we present a detailed investigation of dmen-Mg2(dobpdc) (dmen = 1,2-diamino-2-methylpropane), one of only two MOFs with an adsorption step near the optimal pressure for CO2 capture from coal flue gas. While prior characterization suggested that this material only adsorbs CO2 to half capacity (0.5 CO2 per diamine) at 1 bar, we show that the half-capacity state is actually a metastable intermediate. Under appropriate conditions, the MOF adsorbs CO2 to full capacity, but conversion from the half-capacity structure happens on a very slow time scale, rendering it inaccessible in traditional adsorption measurements. Data from solid-state magic angle spinning nuclear magnetic resonance spectroscopy, coupled with van der Waals-corrected density functional theory, indicate that ammonium carbamate chains formed at half capacity and full capacity adopt opposing configurations, and the need to convert between these states likely dictates the sluggish post-half-capacity uptake. By use of the more symmetric parent framework Mg2(pc-dobpdc) (pc-dobpdc4- = 3,3'-dioxidobiphenyl-4,4'-dicarboxylate), the metastable trap can be avoided and the full CO2 capacity of dmen-Mg2(pc-dobpdc) accessed under conditions relevant for carbon capture from coal-fired power plants.

Coordinatively unsaturated metal sites within certain zeolites and metal-organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H2 at the trigonal pyramidal Cu+ sites in the metal-organic framework CuI-MFU-4l occurs via the intermediacy of a metastable physisorbed precursor species. In situ powder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Evidence for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. The activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu+ coordination environment that enhances π-backbonding with H2. Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.

A 2D coupled electromagnetic-fluid-thermal analysis based on the Fluent software and the “User-Defined Functions” was performed to investigate the effects of conductive circuits on the bonding quality of a bimetallic composite roll produced by the electroslag remelting cladding (ESRC) process. Three typical conductive circuit schemes were designed and the distribution characteristics of physical fields were calculated and discussed. The results illustrated that the differences in the conductive circuits mainly affected the distributions of electric potential, current density, Joule heating, Lorentz force, flow velocity, and final temperatures in the slag pool, in turn. A high temperature in the slag pool always led to high temperatures at the bimetallic interface and slag/steel interface which determined the bonding quality of bimetals and the solidification quality of the composite layer. Finally, the conductive circuit of electrode → slag pool → total part of current supplying mold (abbreviation ESTM) was recommended, and a GCr15/45 steel composite billet with uniform bimetallic interface was produced by the ESRC process.

A bimetallic composite roll with the cladding layer of high-speed steel (HSS) and the roll core of ductile cast iron (DCI) was manufactured by the electroslag remelting cladding (ESRC) technology, ...

This article reviews A language management approach to language problems: Integrating macro and micro dimensions

Materials that combine magnetic order with other desirable physical attributes could find transformative applications in spintronics, quantum sensing, low-density magnets and gas separations. Among potential multifunctional magnetic materials, metal–organic frameworks, in particular, bear structures that offer intrinsic porosity, vast chemical and structural programmability, and the tunability of electronic properties. Nevertheless, magnetic order within metal–organic frameworks has generally been limited to low temperatures, owing largely to challenges in creating a strong magnetic exchange. Here we employ the phenomenon of itinerant ferromagnetism to realize magnetic ordering at TC = 225 K in a mixed-valence chromium(ii/iii) triazolate compound, which represents the highest ferromagnetic ordering temperature yet observed in a metal–organic framework. The itinerant ferromagnetism proceeds through a double-exchange mechanism, which results in a barrierless charge transport below the Curie temperature and a large negative magnetoresistance of 23% at 5 K. These observations suggest applications for double-exchange-based coordination solids in the emergent fields of magnetoelectrics and spintronics. The development of metal–organic magnets that combine tunable magnetic properties with other desirable physical properties remains challenging despite numerous potential applications. Now, a mixed-valent chromium–triazolate material has been prepared that exhibits itinerant ferromagnetism with a magnetic ordering temperature of 225 K, a high conductivity and large negative magnetoresistance (23%).

The widespread implementation of H2 as a fuel is currently hindered by the high pressures or cryogenic temperatures required to achieve reasonable storage densities. In contrast, the realization of materials that strongly and reversibly adsorb hydrogen at ambient temperatures and moderate pressures could transform the transportation sector and expand adoption of fuel cells in other applications. To date, however, no adsorbent has been identified that exhibits a binding enthalpy within the optimal range of -15 to -25 kJ/mol for ambient-temperature hydrogen storage. Here, we report the hydrogen adsorption properties of the metal-organic framework (MOF) V2Cl2.8(btdd) (H2btdd, bis(1H-1,2,3-triazolo[4,5-b],[4',5'-i])dibenzo[1,4]dioxin), which features exposed vanadium(II) sites capable of backbonding with weak π acids. Significantly, gas adsorption data reveal that this material binds H2 with an enthalpy of -21 kJ/mol. This binding energy enables usable hydrogen capacities that exceed that of compressed storage under the same operating conditions. The Kubas-type vanadium(II)-dihydrogen complexation is characterized by a combination of techniques. From powder neutron diffraction data, a V-D2(centroid) distance of 1.966(8) A is obtained, the shortest yet reported for a MOF. Using in situ infrared spectroscopy, the H-H stretch was identified, and it displays a red shift of 242 cm-1. Electronic structure calculations show that a main contribution to bonding stems from the interaction between the vanadium dπ and H2 σ* orbital. Ultimately, the pursuit of MOFs containing high densities of weakly π-basic metal sites may enable storage capacities under ambient conditions that far surpass those accessible with compressed gas storage.

Numerous adsorption-based technologies are emerging as candidates for hydrogen transportation, and yet little is known about their practical viability. As such, new approaches are needed to conduct early validation of emerging hydrogen transportation concepts despite a lack of clear criteria for viable future hydrogen supply chains. In this work, we conduct technoeconomic modeling to quantify cost, performance, and relations between system components for early-stage adsorbent-based hydrogen supply chains. We compare results with the cost and performance of high pressure compressed gas and liquid hydrogen trucks in the same applications. Using available experimental adsorption data, we simulate the gravimetric performance of tube trailer trucks packed with metal–organic frameworks (MOFs) operated at 100 bar and 77 or 200 K. We also extrapolated available experimental data to study a third scenario where tube trailer trucks are operated at ambient temperature and 250 bar. Models developed for these conditions represent feasible operation scenarios where pressurization or cooling costs can be reduced relative to compressed or liquid hydrogen truck systems. Results suggest that the levelized cost of long-distance transmission, including a gas terminal and MOF-based truck fleet, ranges from $7.3 to $29.0 per kg H2. The levelized cost of transmission using compressed hydrogen gas trucks at 350 and 500 bar and liquid hydrogen trucks is substantially lower, at $1.8, $1.7 and $3.1 per kg H2, respectively. In a short-distance urban distribution application, the MOF-based truck fleet, gas terminal, and refueling stations have a levelized cost between $11.8 and $40.0 per kg H2, which is also more expensive than distribution in the case of the 350 bar, 500 bar and liquid hydrogen trucks, which have levelized costs of $4.7, $4.1 and $3.9 per kg H2, respectively. Key opportunities identified for lowering costs are: increasing the hydrogen capacity of the tube system by developing new MOFs with higher volumetric deliverable capacities, flexible allowable daily deliveries per refueling station, increasing the cycling stability of the MOF, and driverless trucks.

Nitric oxide (NO) is an important signaling molecule in biological systems, and as such, the ability of porous materials to reversibly adsorb NO is of interest for potential medical applications. Although certain metal–organic frameworks are known to bind NO reversibly at coordinatively unsaturated metal sites, the influence of the metal coordination environment on NO adsorption has not been studied in detail. Here, we examine NO adsorption in the frameworks Co2Cl2(bbta) (H2bbta = 1H,5H-benzo(1,2-d:4,5-d′)bistriazole) and Co2(OH)2(bbta) using gas adsorption, infrared spectroscopy, powder X-ray diffraction, and magnetometry. At room temperature, NO adsorbs reversibly in Co2Cl2(bbta) without electron transfer, with low temperature data supporting spin-crossover of the NO-bound cobalt(ii) centers of the material. In contrast, adsorption of low pressures of NO in Co2(OH)2(bbta) is accompanied by charge transfer from the cobalt(ii) centers to form a cobalt(iii)–NO− adduct, as supported by diffraction and infrared spectroscopy data. At higher pressures of NO, characterization data indicate additional uptake of the gas and disproportionation of the bound NO to form a cobalt(iii)–nitro (NO2−) species and N2O gas, a transformation that appears to be facilitated by secondary sphere hydrogen bonding interactions between the bound NO2− and framework hydroxo groups. These results provide a rare example of reductive NO binding in a cobalt-based metal–organic framework, and they demonstrate that NO uptake can be tuned by changing the primary and secondary coordination environment of the framework metal centers., Nitric oxide (NO) shows differences in adsorption and reactivity in two related cobalt(ii)–triazolate frameworks, demonstrating how the primary and secondary coordination sphere of metal centers in adsorbents can be designed for targeted delivery.

A numerical simulation based on the coupling of electromagnetic-fluid-thermal analysis was developed to investigate the effects of electrode immersion depth (EID) on the electrical resistance and heat generation in the electroslag remelting (ESR) process. The total electric current was obtained by integrating the current density at the slag/metal interface, and the electrical resistance is the ratio of potential to current. It indicates that the EID variation changes the shape, size, and current path of the slag pool, and, as a result, the current density, heat generation, and melting power are directly proportional to the EID, while the electrical resistance of the slag pool is inversely proportional to the EID. The distance between the electrode and the molten-metal pool and the contact areas between the electrode and the slag are the main factors affecting the distribution of voltage, current density, Joule heating, and temperature in the slag pool of the ESR process. A change in the current density affects the electrical resistance and heat generation, which has a direct effect on the ESR process.

Industrial processes prominently feature π-acidic gases, and an adsorbent capable of selectively interacting with these molecules could enable important chemical separations1-4. Biological systems use accessible, reducing metal centres to bind and activate weakly π-acidic species, such as N2, through backbonding interactions5-7, and incorporating analogous moieties into a porous material should give rise to a similar adsorption mechanism for these gaseous substrates8. Here, we report a metal-organic framework featuring exposed vanadium(II) centres capable of back-donating electron density to weak π acids to successfully target π acidity for separation applications. This adsorption mechanism, together with a high concentration of available adsorption sites, results in record N2 capacities and selectivities for the removal of N2 from mixtures with CH4, while further enabling olefin/paraffin separations at elevated temperatures. Ultimately, incorporating such π-basic metal centres into porous materials offers a handle for capturing and activating key molecular species within next-generation adsorbents.

Bio-inspired motifs for gas binding and small molecule activation can be used to design more selective adsorbents for gas separation applications. Here, we report an iron metal–organic framework, Fe-BTTri (Fe3[(Fe4Cl)3(BTTri)8]2·18CH3OH, H3BTTri = 1,3,5-tris(1H-1,2,3-triazol-5-yl)benzene), that binds O2 in a manner similar to hemoglobin and therefore results in highly selective O2 binding. As confirmed by gas adsorption studies and Mössbauer and infrared spectroscopy data, the exposed iron sites in the framework reversibly adsorb substantial amounts of O2 at low temperatures by converting between high-spin, square-pyramidal Fe(ii) centers in the activated material to low-spin, octahedral Fe(iii)–superoxide sites upon gas binding. This change in both oxidation state and spin state observed in Fe-BTTri leads to selective and readily reversible O2 binding, with the highest reported O2/N2 selectivity for any iron-based framework., Bio-inspired motifs for gas binding and small molecule activation can be used to design more selective adsorbents for gas separation applications.

Nitric oxide (NO) is an important signaling molecule in biological systems, and as such, the ability of porous materials to reversibly adsorb NO is of interest for potential medical applications. Although certain metal-organic frameworks are known to bind NO reversibly at coordinatively unsaturated metal sites, the influence of the metal coordination environment on NO adsorption has not been studied in detail. Here, we examine NO adsorption in the frameworks Co

Carbon capture at fossil fuel-fired power plants is a critical strategy to mitigate anthropogenic contributions to global warming, but widespread deployment of this technology is hindered by a lack of energy-efficient materials that can be optimized for CO

Coordinatively unsaturated metal sites within certain zeolites and metal-organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H

According to the previous numerical simulation, a bimetallic composite billet has been produced by the new electroslag cladding method in the present study. Its longitudinal and circumferential mac...

Coordinatively-unsaturated metal sites within certain zeolites and metal–organic frameworks can strongly adsorb various molecules. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through electrostatic interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that H2chemisorption at the trigonal pyramidal Cu+sites in the metal–organic framework CuI‑MFU-4l occurs via the intermediacy of a metastable physisorbed precursor species. In situpowder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Support for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. The activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu+coordination environment that enhances π-backbonding with H2. Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.

To investigate the distribution characteristics ofFrom 2015 to 2019, a total of 19 national schistosomiasis surveillance sites were assigned in Guangxi Zhuang Autonomous Region, including 4 fixed sites and 15 mobile sites. Snail survey was performed by means of systematic sampling in combination with environmental sampling, and the infection ofFrom 2015 to 2019, snail habitats were detected at areas of 17 040 to 39 527 mThere are still risk factors leading to re-emergent transmission of schistosomiasis in Guangxi Zhuang Autonomous Region, such as local snail spread, and the monitoring of schistosomiasis remains to be reinforced to further consolidate the achievements of schistosomiasis elimination in the region.

Since 2015 when the transmission of schistosomiasis was controlled in China, the country has been moving towards elimination of schistosomiasis, with the surveillance

Coordinatively-unsaturated metal sites within certain zeolites and metal–organic frameworks can strongly adsorb various molecules. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through electrostatic interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that H2chemisorption at the trigonal pyramidal Cu+sites in the metal–organic framework CuI‑MFU-4l occurs via the intermediacy of a metastable physisorbed precursor species. In situpowder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Support for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. The activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu+coordination environment that enhances π-backbonding with H2. Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.

Nitric oxide (NO) is an important signaling molecule in biological systems, and as such the ability of certain porous materials to reversibly adsorb NO is of interest for medical applications. Metal–organic frameworks have been explored for their ability to reversibly bind NO at coordinatively-unsaturated metal sites, however the influence of metal coordination environment on NO adsorption has yet to be studied in detail. Here, we examine NO adsorption in the frameworks Co2Cl2(bbta) and Co2(OH)2(bbta) (H2bbta = 1H,5H-benzo(1,2-d:4,5-d′)bistriazole) via gas adsorption, infrared spectroscopy, powder X-ray diffaction, and magnetometry measurements. While NO adsorbs reversibly in Co2Cl2(bbta) without electron-transfer, adsorption of low pressures of NO in Co2(OH)2(bbta) is accompanied by charge transfer from the cobalt(II) centers to form a cobalt(III)–NO− adduct, as supported by diffraction and infrared spectroscopy data. At higher pressures of NO, characterization data support additional uptake of the gas and disproportionation of the bound NO to form a cobalt(III)–nitro (NO2−) species and N2O gas, a transformation that appears to be facilitated in part by stabilizing hydrogen bonding interactions between the bound NO2− and framework hydroxo groups. This reactivity represents a rare example of reductive NO-binding in a metal–organic framework and demonstrates that NO binding can be tuned by changing the coordination environment of the framework metal centers.

Natural gas has become the dominant source of electricity in the United States, and technologies capable of efficiently removing carbon dioxide (CO2) from the flue emissions of natural gas-fired power plants could reduce their carbon intensity. However, given the low partial pressure of CO2 in the flue stream, separation of CO2 is particularly challenging. Taking inspiration from the crystal structures of diamine-appended metal-organic frameworks exhibiting two-step cooperative CO2 adsorption, we report a family of robust tetraamine-functionalized frameworks that retain cooperativity, leading to the potential for exceptional efficiency in capturing CO2 under the extreme conditions relevant to natural gas flue emissions. The ordered, multimetal coordination of the tetraamines imparts the materials with extraordinary stability to adsorption-desorption cycling with simulated humid flue gas and enables regeneration using low-temperature steam in lieu of costly pressure or temperature swings.

The design of stable adsorbents capable of selectively capturing dioxygen with a high reversible capacity is a crucial goal in functional materials development. Drawing inspiration from biological O2 carriers, we demonstrate that coupling metal-based electron transfer with secondary coordination sphere effects in the metal–organic framework Co2(OH)2(bbta) (H2bbta = 1H,5H-benzo(1,2-d:4,5-d′)bistriazole) leads to strong and reversible adsorption of O2. In particular, moderate-strength hydrogen bonding stabilizes a cobalt(III)-superoxo species formed upon O2 adsorption. Notably, O2-binding in this material weakens as a function of loading, as a result of negative cooperativity arising from electronic effects within the extended framework lattice. This unprecedented behavior extends the tunable properties that can be used to design metal–organic frameworks for adsorption-based applications., Oxygen capture is attractive for catalysis, sensing, and separations, but engineering stable and selective adsorbents is challenging. Here the authors combine metal-based electron transfer with secondary coordination sphere effects in a metal-organic framework, leading to strong and reversible O2 adsorption that also exhibits negative cooperativity.

Materials that combine magnetic order with other desirable physical attributes offer to revolutionize our energy landscape. Indeed, such materials could find transformative applications in spintronics, quantum sensing, low-density magnets, and gas separations. As a result, efforts to design multifunctional magnetic materials have recently moved beyond traditional solid-state materials to metal–organic solids. Among these, metal–organic frameworks in particular bear structures that offer intrinsic porosity, vast chemical and structural programmability, and tunability of electronic properties. Nevertheless, magnetic order within metal–organic frameworks has generally been limited to low temperatures, owing largely to challenges in creating strong magnetic exchange in extended metal–organic solids. Here, we employ the phenomenon of itinerant ferromagnetism to realize magnetic ordering at TC = 225 K in a mixed-valence chromium(II/III) triazolate compound, representing the highest ferromagnetic ordering temperature yet observed in a metal–organic framework. The itinerant ferromagnetism is shown to proceed via a double-exchange mechanism, the first such observation in any metal–organic material. Critically, this mechanism results in variable-temperature conductivity with barrierless charge transport below TC and a large negative magnetoresistance of 23% at 5 K. These observations suggest applications for double-exchange-based coordination solids in the emergent fields of magnetoelectrics and spintronics. Taken together, the insights gleaned from these results are expected to provide a blueprint for the design and synthesis of porous materials with synergistic high-temperature magnetic and charge transport properties.

Materials that combine magnetic order with other desirable physical attributes offer to revolutionize our energy landscape. Indeed, such materials could find transformative applications in spintronics, quantum sensing, low-density magnets, and gas separations. As a result, efforts to design multifunctional magnetic materials have recently moved beyond traditional solid-state materials to metal–organic solids. Among these, metal–organic frameworks in particular bear structures that offer intrinsic porosity, vast chemical and structural programmability, and tunability of electronic properties. Nevertheless, magnetic order within metal–organic frameworks has generally been limited to low temperatures, owing largely to challenges in creating strong magnetic exchange in extended metal–organic solids. Here, we employ the phenomenon of itinerant ferromagnetism to realize magnetic ordering at TC = 225 K in a mixed-valence chromium(II/III) triazolate compound, representing the highest ferromagnetic ordering temperature yet observed in a metal–organic framework. The itinerant ferromagnetism is shown to proceed via a double-exchange mechanism, the first such observation in any metal–organic material. Critically, this mechanism results in variable-temperature conductivity with barrierless charge transport below TC and a large negative magnetoresistance of 23% at 5 K. These observations suggest applications for double-exchange-based coordination solids in the emergent fields of magnetoelectrics and spintronics. Taken together, the insights gleaned from these results are expected to provide a blueprint for the design and synthesis of porous materials with synergistic high-temperature magnetic and charge transport properties.

Materials that combine magnetic order with other desirable physical attributes could find transformative applications in spintronics, quantum sensing, low-density magnets and gas separations. Among potential multifunctional magnetic materials, metal-organic frameworks, in particular, bear structures that offer intrinsic porosity, vast chemical and structural programmability, and the tunability of electronic properties. Nevertheless, magnetic order within metal-organic frameworks has generally been limited to low temperatures, owing largely to challenges in creating a strong magnetic exchange. Here we employ the phenomenon of itinerant ferromagnetism to realize magnetic ordering at T

Over one million tons of CS2 are produced annually, and emissions of this volatile and toxic liquid, known to generate acid rain, remain poorly controlled. As such, materials capable of reversibly capturing this commodity chemical in an energy-efficient manner are of interest. Recently, we detailed diamine-appended metal–organic frameworks capable of selectively capturing CO2 through a cooperative insertion mechanism that promotes efficient adsorption–desorption cycling. We therefore sought to explore the ability of these materials to capture CS2 through a similar mechanism. Employing crystallography, spectroscopy, and gas adsorption analysis, we demonstrate that CS2 is indeed cooperatively adsorbed in N,N-dimethylethylenediamine-appended M2(dobpdc) (M = Mg, Mn, Zn; dobpdc4- = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate), via the formation of electrostatically paired ammonium dithiocarbamate chains. In the weakly thiophilic Mg congener, chemisorption is cleanly reversible with mild thermal input. This work demonstrates that the cooperative insertion mechanism can be generalized to other high-impact target molecules., The large-scale production of CS2 presents both environmental and biological hazards, yet adsorbents capable of CS2 capture remain scarcely explored. Here, Long and colleagues demonstrate that CS2 is adsorbed in diamine-appended metal–organic frameworks through a cooperative and chemically specific insertion process.

Hydrogen holds promise as a clean alternative automobile fuel, but its on-board storage presents significant challenges due to the low temperatures and/or high pressures required to achieve a sufficient energy density. The opportunity to significantly reduce the required pressure for high density H(2) storage persists for metal–organic frameworks due to their modular structures and large internal surface areas. The measurement of H(2) adsorption in such materials under conditions most relevant to on-board storage is crucial to understanding how these materials would perform in actual applications, although such data have to date been lacking. In the present work, the metal–organic frameworks M(2)(m-dobdc) (M = Co, Ni; m-dobdc(4−) = 4,6-dioxido-1,3-benzenedicarboxylate) and the isomeric frameworks M(2)(dobdc) (M = Co, Ni; dobdc(4−) = 1,4-dioxido-1,3-benzenedicarboxylate), which are known to have open metal cation sites that strongly interact with H(2), were evaluated for their usable volumetric H(2) storage capacities over a range of near-ambient temperatures relevant to on-board storage. Based upon adsorption isotherm data, Ni(2)(m-dobdc) was found to be the top-performing physisorptive storage material with a usable volumetric capacity between 100 and 5 bar of 11.0 g/L at 25 °C and 23.0 g/L with a temperature swing between −75 and 25 °C. Additional neutron diffraction and infrared spectroscopy experiments performed with in situ dosing of D(2) or H(2) were used to probe the hydrogen storage properties of these materials under the relevant conditions. The results provide benchmark characteristics for comparison with future attempts to achieve improved adsorbents for mobile hydrogen storage applications.

A combined spectroscopic and structural study was undertaken to investigate the nature of the incorporation of the electron acceptor guest 7,7,8,8-tetracyanoquinodimethane (TCNQ) and the closely related guest tetracyanoethylene (TCNE) into the host porous framework [Cu3(BTC)2] (BTC = 1,3,5-benzenetricarboxylate)—a guest–host system recently shown to be highly conductive. We find that the guest concentration in the system can be modulated via the synthesis reaction time and temperature. A suite of spectroscopic, X-ray and neutron powder diffraction, and density functional theory techniques revealed the mechanism of guest binding within the framework host, including the guest redox states. This work provides insights into the way that electrical conductivity arises in porous framework host–guest systems and contributes to understanding how fine-tuning framework properties influences conductivity.

The pathogenesis of chronic rhinosinusitis(CRS) is complex. There are differences in the clinical manifestations and therapeutic effects of CRS dominated by different causes. At present, there is a lack of uniform classification standards in clinical practice. In this paper, the research progress in the endotype of CRS in recent years was discussed.

Industrial processes prominently feature π-acidic gases, and an adsorbent capable of selectively interacting with these molecules could enable important chemical separations

To meet the high cleanliness requirements of bearing steel used in high-speed railway trains, a new production process combining vacuum induction melting and electroslag remelting (ESR) was used to produce G20CrNi2Mo bearing steel. To investigate the effect of remelting on the cleanliness of the steel, two kinds of G20CrNi2Mo steels were prepared using an ESR furnace with and without high-purity argon protection. The results show that the G20CrNi2Mo electrodes smelted using a vacuum induction furnace have very high cleanliness 0.010[P%]–0.004[S%]–0.0012[O%]–0.0041[N%]). Unprotected ESR leads to an increased oxygen content, while protected ESR prevents any increase in oxygen content. Both protected and unprotected ESR results in significant desulphurisation, with desulphurisation rates reaching over 50%. The protected ESR process removes Al2O3–SiO2–MnO inclusions, and the remaining inclusions in the steel can be divided into two categories, Al2O3 and Al2O3–MnS.

The advantages of the electroslag remelting (ESR) process as to cleanness and homogeneity of the ingot structure are well known. As to homogeneity of composition, the control of titanium in stainless steel with high titanium and low aluminium contents during the ESR process has not been resolved well so far. The current work focuses on designing appropriate slag for controlling titanium content during 1Cr21Ni5Ti remelting based on the interaction of the slag/metal interface. Several kinds of slag containing different CaO contents combined with steel samples of 1Cr21Ni5Ti were employed to investigate the effect of slag on titanium content in an electrical resistance furnace, and metal samples were taken at different times for investigating the change of titanium and aluminium contents in steel. The results show that slag with low CaO content at low temperature has excellent capacity for avoiding loss of titanium content caused by its reaction with the alumina in slag, especially in case of remelting of sta...

A comprehensive mathematical model of the solidification structure during the process of electroslag remelting casting (ESRC) of low carbon martensite stainless steel ZG06Cr13Ni4Mo has been established. The change of metal pool profile and grain growth and the microstructure evolution process from the beginning to the steady stage of the ESRC process were investigated by using the moving boundary method and the coupled technology CAFE method (cellular automaton – finite element method). The transition from equiaxed grains at the lateral wall of the mould to columnar grains has been revealed. In addition, casting of this steel has been carried out and the microstructure of the ingot obtained after grinding and acid leaching. According to the comparison of the metal pool profile, morphology and growth direction of the dendrite and the secondary dendrite arm spacing (SDAS) between the experimental results and the simulation results, the validity of the model has been demonstrated, which can provide a favoura...

Over one million tons of carbon disulfide are produced globally each year for an array of applications, and emissions of this highly volatile and toxic liquid, known to generate acid rain, remain poorly controlled. As such, materials capable of reversibly capturing this commodity chemical in an energy-efficient manner are of interest. Recently, we detailed a family of diamine-appended metal–organic frameworks capable of selectively capturing carbon dioxide through a cooperative insertion mechanism that promotes efficient adsorption–desorption cycling. We therefore sought to explore the fundamental ability of these materials to capture CS2 through a similar mechanism. Employing crystallography, spectroscopy, and gas adsorption analysis, we demonstrate that CS2 is indeed cooperatively adsorbed in N,N-dimethylethylenediamine-appended M2(dobpdc) (M = Mg, Mn, Zn; dobpdc4− = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate), via the formation of electrostatically paired ammonium dithiocarbamate chains. Notably, in the weakly thiophilic Mg congener, chemisorption is cleanly reversible with mild thermal input. Importantly, this work demonstrates that the hitherto CO2-specific cooperative insertion mechanism can be generalized to other high-impact target molecules.

Over one million tons of carbon disulfide are produced globally each year for an array of applications, and emissions of this highly volatile and toxic liquid, known to generate acid rain, remain poorly controlled. As such, materials capable of reversibly capturing this commodity chemical in an energy-efficient manner are of interest. Recently, we detailed a family of diamine-appended metal–organic frameworks capable of selectively capturing carbon dioxide through a cooperative insertion mechanism that promotes efficient adsorption–desorption cycling. We therefore sought to explore the fundamental ability of these materials to capture CS2 through a similar mechanism. Employing crystallography, spectroscopy, and gas adsorption analysis, we demonstrate that CS2 is indeed cooperatively adsorbed in N,N-dimethylethylenediamine-appended M2(dobpdc) (M = Mg, Mn, Zn; dobpdc4− = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate), via the formation of electrostatically paired ammonium dithiocarbamate chains. Notably, in the weakly thiophilic Mg congener, chemisorption is cleanly reversible with mild thermal input. Importantly, this work demonstrates that the hitherto CO2-specific cooperative insertion mechanism can be generalized to other high-impact target molecules.