Search

During the last 12 years using the GABRIELA (Gamma Alpha Beta Recoil Invetsigations with the ELectromagnetic Analyser) detector set up and kinematic recoil separators VASSILISSA / SHELS the experiments aimed to the gamma and electron spectroscopy of the Fm-Db isotopes, formed at the complete fusion reactions48Ca +207,208Pb--255,256 No* ,48Ca +209Bi--257Lr* ,22Ne+238U--260No*,50Ti +208Pb--258Rf* and50Ti +209Bi--259Db* , were performed at FLNR JINR.

An experimental study of 256Rf spontaneous fission following the fusion reaction of 50Ti+208Pb was performed using the velocity filter SHELS of the Flerov laboratory at JINR. The average number of neutrons of ν‾=4.30±0.17 and variance of σν2=3.2 from the prompt neutron multiplicity distribution were obtained. The alpha decay branching ratio of bα=0.003−0.003+0.005 and the half-life of T1/2=(6.7±0.2) ms of the isotope were determined. For the first time, our neutron detector system allowed us to extend investigation of the prompt neutron multiplicity study to the superheavy element region.

The binding properties of two thiacalix[4]arene-bis-crown[n] derivatives (n = 5 and 6) were examined through extraction experiments. The stability constants of the resulting complexes in methanol were determined. The replacement of the bridging CH2 groups by sulfur atoms leads to a strong decrease in both extraction and complexation levels of alkali metal ions but does not affect the selectivity within the series of crown ethers. The stability of complexes with heavy metal ions does not change markedly on passing from thiacalix[4]arene-bis-crown[n] ethers to their calix[4]arene-bis-crown[n] counterparts; therefore no clear-cut conclusions about the possible interactions between these cations and the sulfur atoms can be drawn. [ABSTRACT FROM AUTHOR]

The analysis of fission events following the implantation of evaporation residues produced in the fusion reaction of 50Ti and 209Bi at different bombarding energies has revealed 5 millisecond decays, which are attributed to the spontaneous fission of proton-evaporation channels. The average cross sections for proton evaporation are found to be ∼100 and 10 times smaller than the largest neutron-evaporation channel cross section at the same excitation energy. These results suggest that the proton evaporation channel, albeit weak, may represent a realistic alternative to synthesize new, more neutron rich super heavy nuclei. Keywords: Fusion-evaporation reaction, Proton evaporation, Super heavy nuclei, Cross section

Metal nanoparticles are potent reaction catalysts, but they tend to aggregate, thereby limiting their catalytic efficiency. Their coordination with specific functional groups within a porous structure prevents their aggregation and facilitates the mass flow of catalytic starting materials and products. Herein, we use a thiacalix[4]arene-based polymer as a porous support with abundant docking sites for Au nanoparticles. The sulfur atoms bridging the phenolic subunits of thiacalix[4]arene serve as Lewis basic sites that coordinate Au atoms. Therefore, this approach takes advantage of the functional groups inherent in the monomer and avoids laborious postsynthetic modifications of the polymer. The presented system was tested for visible-light-driven photocatalytic CO 2 reduction, where it showed adequate ability to generate 6.74 μmol g -1 CO over the course of 4 h, while producing small amounts of the CH 4 product. This study aims to stimulate interest in the design and development of synthetically simpler porous polymer supports for various metal nanoparticles in catalytic and other applications.

Two calix[4]arene systems, C23 4+ and C24 4+ - where 2 corresponds to the number of viologen units and 3-4 corresponds to the number of carbon atoms connecting the viologen units to the macrocyclic core - have been synthesized and led to the formation of [3]pseudorotaxanes when combined with either CB[7] or CB[8]. The [3]pseudorotaxanes spontaneously dissociate upon reduction of the bipyridinium units as the result of intramolecular dimerization of the two face-to-face viologen radical cations. CB[7] and CB[8]-based [2]pseudorotaxanes containing monomeric viologen guest model compounds, MC3 2+ and MC 4+ , do not undergo decomplexation and dimerization following electrochemical reduction of their bipyridinium units., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

On account of its nonbiodegradable nature and persistence in the environment, perfluorooctanoic acid (PFOA) accumulates in water resources and poses serious environmental issues in many parts of the world. Here, we present the development of two fluorine-rich calix[4]arene-based porous polymers, FCX4-P and FCX4-BP , and demonstrate their utility for the efficient removal of PFOA from water. These materials featured Brunauer-Emmett-Teller (BET) surface areas of up to 450 m 2 g -1 , which is slightly lower than their nonfluorinated counterparts (up to 596 m 2 g -1 ). FCX4-P removes PFOA at environmentally relevant concentrations with a high rate constant of 3.80 g mg -1 h -1 and reached an exceptional maximum PFOA uptake capacity of 188.7 mg g -1 . In addition, it could be regenerated by simple methanol wash and reused without a significant decrease in performance.

A rational design of adsorbents with high uptake efficiency and fast kinetics for highly toxic pollutants is a key challenge in environmental remediation. Here, we report the design of a well-defined thioether-crown-rich porous calix[4]arene-based mesoporous polymer S-CX4P and its utility in removal of highly relevant toxic mercury (Hg 2+ ) from water. The polymer shows an exceptional, record-high uptake efficiency of 1686 mg g -1 and the fastest initial adsorption rate of 278 mg g -1 min -1 . Remarkably, S-CX4P can effectively remove Hg 2+ from high concentration (5 ppm) to below the acceptable limit for drinking water (2 ppb) even in the presence of other competitive metals at high concentrations. In addition, the polymer can be easily regenerated at room temperature and reused multiple times with negligible loss in uptake rate and efficiency. The results demonstrate the potential of rationally designed thioether-crown-rich polymers for high performance mercury removal.

Calixarenes are a common motif in supramolecular chemistry but have rarely been incorporated in structurally well-defined covalent 2D materials. Such a task is challenging, especially without a template, because of the nonplanar configuration and conformational flexibility of the calixarene ring. Here, we report the first-of-a-kind solvothermal synthesis of a calix[4]arene-based 2D polymer (CX4-NS) that is porous, covalent, and isolated as few-layer thick (3.52 nm) nanosheets. Experimental and theoretical characterization of the nanosheets is presented. Atomic force microscopy and transmission electron microscopy results are consistent with the calculated lowest energy state of the polymer. In the lowest energy state, parallel layers are tightly packed, and the calixarenes adopt the 1,2-alternate conformation, which gives rise to a two-dimensional pattern and a rhombic unit cell. We tested the material's ability to adsorb I 2 vapor and observed a maximum capacity of 114 wt %. Molecular simulations extended to model I 2 capture showed excellent agreement with experiments. Furthermore, the material was easily regenerated by mild ethanol washings and could be reused with minimal loss of efficiency.

Organic micropollutants are hazards to the environment and human health. Conventional technologies are often inefficient at removing them from wastewater. For example, commercial activated carbon (AC) exhibits slow uptake rates, limited capacities, and is costly to regenerate. Here, we report the utility of porous calix[4]arene-based materials, CalPn (n = 2-4), for water purification. Calixarenes are a common motif in supramolecular chemistry but have rarely been incorporated into extended, porous networks such as organic polymers. CalPn exhibit pollutant uptake rates (k obs ) and adsorption capacities (q max ) that are among the highest reported. For example, the k obs of CalP4 for bisphenol A (BPA) is 2.12 mg/g·min, which is significantly higher (16 to 240 times) than k obs for ACs and 1.4 times higher than that of the most efficient material previously reported; the q max of CalP4 for BPA is 403 mg/g. The CalPn polymers can be regenerated several times, with performance levels left undiminished, by a simple wash procedure that is less energy intensive than that required for ACs. These findings demonstrate the potential of calixarene-based materials for organic micropollutant removal.

The syntheses of two new ligands based on a calix[4]arene scaffold in the cone conformation functionalized on the phenolic positions 1 and 3 by diethylthiophosphonates (L1) or tetra(tri)thioethyleneglycol (L2) crowns are described. Together with ligand L3, the parent calix[4]arene substituted by a penta(tetra)thioethyleneglycol crown, the spectroscopic properties of the ligands were determined by means of UV-Vis absorption spectroscopy and steady-state and time-resolved fluorescence spectroscopy, showing that the ligands display modest but non-negligible intrinsic fluorescence properties (ϕ fluo = 0.023; 0.026 and 0.029 for L1, L2 and L3 in CH 2 Cl 2 , respectively). The X-ray crystal structures of ligand L1, and of its synthetic precursor were determined and analyzed for their capacity to accommodate the incoming cationic species. The ligands were further investigated for their complexation properties of divalent cations such as Cu 2+ , Zn 2+ , Hg 2+ and Cd 2+ (under their nitrate salts) in 1 : 1 CH 3 CN/CH 2 Cl 2 solutions (I = 0.01 M Et 4 NNO 3 , T = 25.0(2) °C), in which the additions of cations were monitored by absorption and steady-state fluorescence spectrophotometries. The stoichiometries of the corresponding complexes were assessed by ESI-MS, while insights into the structures of the complexes in solution were obtained with density functional theory (DFT) calculations. The influence of the sulphur and phenol coordinating moieties was addressed to show that the thiocrown compounds L2 and L3 displayed a marked affinity towards the soft mercuric cation (Δlog K ≥ 2), with no particular size selectivity effect, whereas ligand L1 can accommodate both the thio and phenol units to coordinate with Cu(ii). Altogether, these results point to the use of L3 as a selective fluoroionophore for detection of Hg 2+ .

Sulfonated surface patches of poly(styrene)-based colloidal particles (CPs) were functionalized with cucurbit[7]uril (CB[7]). The macrocycles served as recognition units for diphenyl viologen (DPV(2+)), a rigid bridging ligand. The addition of DPV(2+) to aqueous suspensions of the particles triggered the self-assembly of short linear and branched chainlike structures. The self-assembly mechanism is based on hydrophobic/ion-charge interactions that are established between DPV(2+) and surface-adsorbed CB[7]. DPV(2+) guides the self-assembly of the CPs by forming a ternary DPV(2+)⊂(CB[7])2 complex in which the two CB[7] macrocycles are attached to two different particles. Viologen-driven particle assembly was found to be both directional and reversible. Whereas sodium chloride triggers irreversible particle disassembly, the one-electron reduction of DPV(2+) with sodium dithionite causes disassembly that can be reversed via air oxidation. Thus, this bottom-up synthetic supramolecular approach allowed for the reversible formation and directional alignment of a 2D colloidal material.

The synthesis of highly luminescent water soluble CdTe(x)S(y) quantum dots (QDs) is described and their elemental composition and optical properties are fully characterized. Glutathione (GSH)-capped nanocrystals were obtained from an aqueous solution of CdCl2, Na2TeO3 and GSH in the presence of NaBH4 upon heating at 100 °C. Spherical CdTe(x)S(y) alloyed nanoparticles with diameters ranging from 2 to 4 nm were formed, and characterized by X-ray powder diffraction and Transmission Electron Microscopy. Their elemental composition was determined from Inductively Coupled Plasma Atomic Emission Spectroscopy and CHN elemental analysis experiments. A model for the determination of their molecular formulas, molecular weights and extinction coefficients is proposed. Surface GSH molecules were involved in amide bond formation with fluorescent Nile-Red molecules, to be used as energy acceptor in Förster resonance energy transfer (FRET) experiments. FRET was observed from the CdTe(x)S(y) core (λ(ex) = 430 nm) to the Nile-Red dye (λ(em) = 648 nm) with an almost quantitative FRET efficiency (η(FRET) = 98%). A detailed analysis of the FRET is presented, revealing a core-dye distance of 24 Å, in very good agreement with the estimated radius of the core (13 Å) as measured by TEM. The QDs present excellent photophysical properties (QY up to 29%), easy synthesis and can be isolated as solids and redispersed in water without loss of their photoluminescence efficiency.

Suppression of the dimerization of the viologen radical cation by cucurbit[7]uril (CB7) in water is a well-known phenomenon. Herein, two counter-examples are presented. Two viologen-containing thread molecules were designed, synthesized, and thoroughly characterized by (1)H DOSY NMR spectrometry, UV/Vis absorption spectrophotometry, square-wave voltammetry, and chronocoulometry: BV(4+), which contains two viologen subunits, and HV(12+), which contains six. In both threads, the viologen subunits are covalently bonded to a hexavalent phosphazene core. The corresponding [3]- and [7]pseudorotaxanes that form on complexation with CB7, that is, BV(4+)⊂(CB7)2 and HV(12+)⊂(CB7)6, were also analyzed. The properties of two monomeric control threads, namely, methyl viologen (MV(2+)) and benzyl methyl viologen (BMV(2+)), as well as their [2]pseudorotaxane complexes with CB7 (MV(2+)⊂CB7 and BMV(2+)⊂CB7) were also investigated. As expected, the control pseudorotaxanes remained intact after one-electron reduction of their viologen-recognition stations. In contrast, analogous reduction of BV(4+)⊂(CB7)2 and HV(12+)⊂(CB7)6 led to host-guest decomplexation and release of the free threads BV(2(·+)) and HV(6(·+)), respectively. (1)H DOSY NMR spectrometric and chronocoulometric measurements showed that BV(2(·+)) and HV(6(·+)) have larger diffusion coefficients than the corresponding [3]- and [7]pseudorotaxanes, and UV/Vis absorption studies provided evidence for intramolecular radical-cation dimerization. These results demonstrate that radical-cation dimerization, a relatively weak interaction, can be used as a driving force in novel molecular switches., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A topological triptych: Three molecular links, a [2]catenane, a trefoil knot, and a Solomon link, were obtained in one pot through the self-assembly of two simple ligands in the presence of Zn(II). The approach relied on dynamic covalent chemistry and metal templation., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The rotational band structure of the Z=104 nucleus (256)Rf has been observed up to a tentative spin of 20ℏ using state-of-the-art γ-ray spectroscopic techniques. This represents the first such measurement in a superheavy nucleus whose stability is entirely derived from the shell-correction energy. The observed rotational properties are compared to those of neighboring nuclei and it is shown that the kinematic and dynamic moments of inertia are sensitive to the underlying single-particle shell structure and the specific location of high-j orbitals. The moments of inertia therefore provide a sensitive test of shell structure and pairing in superheavy nuclei which is essential to ensure the validity of contemporary nuclear models in this mass region. The data obtained show that there is no deformed shell gap at Z=104, which is predicted in a number of current self-consistent mean-field models.

Astatine is a rare radioelement belonging to the halogen group. Considering the trace amounts of astatine produced in cyclotrons, its chemistry cannot be evaluated by spectroscopic tools. Analytical tools, provided that they are coupled with a radioactive detection system, may be an alternative way to study its chemistry. In this research work, high performance anion exchange chromatography (HPAEC) coupled to a gamma detector (γ) was used to evaluate astatine species under reducing conditions. Also, to strengthen the reliability of the experiments, a quantitative analysis using a reactive transport model has been done. The results confirm the existence of one species bearing one negative charge in the pH range 2-7.5. With respect to the other halogens, its behavior indicates the existence of negative ion, astatide At(-). The methodology was successfully applied to the speciation of the astatine in human serum. Under fixed experimental conditions (pH 7.4-7.5 and redox potential of 250 mV) astatine exists mainly as astatide At(-) and does not interact with the major serum components. Also, the method might be useful for the in vitro stability assessment of (211)At-labeled molecules potentially applicable in nuclear medicine., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Metallocapped complexation of the thallium(I) ion with calix[4]crown-6 (1) and three different calix[4]biscrown-6 derivatives (2-4) has been investigated by a combination of (203)Tl and (1)H NMR in a CD(3)CN/CDCl(3) (4:1 v/v) solution. The results clearly revealed the formation in solution of mono- and dithallium(I) complexes in which the metal cations are held in the ligands' cavities close to the calix[4]arene ring. In addition, a solid state mononuclear complex between 1,3-calix[4]bis-o-benzo-crown-6 (3) and TlClO(4) was prepared, and its X-ray crystal structure was determined. The results of the structural data in solution and the solid state suggested that the calix[4]crown-6 derivatives considered provide pi cavities as active sites for the complexation of thallium(I) ions.

The complexation and exchange kinetics and mechanism for the dissociation and conformational change of thallium ion complex of calix[4]crown-6 were studied in CD(3)CN/CDCl(3) (4:1 v/v) solution by dynamic (1)H NMR. The results show the formation of a 1:1 complex with cone conformation. From variable temperature dynamic NMR analysis in the range 223-293 K, two coalescence temperatures at 228 and 243 K were ascertained. The activation parameters for the dissociation process, E(a) (kJ/mol), DeltaS(++) (J/mol.K), and DeltaH(++) (kJ/mol) are 11.0, -133.2, and 10.1 for the bimolecular regime and 21.5, -112.8, and 20.6 for the unimolecular regime, respectively. In addition, the dynamic (1)H NMR spectroscopy shows that the exchange of Tl(+) between the two crown sides of the complexed ligand proceeds through an intramolecular tunneling. An Arrhenius convex curve was observed for intramolecular exchange. This phenomenon is explained in terms of two conformer state formations differentiated by hydrogen bond association.

The synthesis and self-assembled monolayer (SAM) formation of a calix[4]crown-5 derivative are reported. Several techniques, including electrochemistry, atomic force microscopy (AFM), Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and contact angle measurements have been applied to characterise the monolayer film designed for chemical sensor applications. The recognition properties of this SAM for metal cations has been investigated using impedance spectroscopy (IS) showing an electrochemical response proportional to calcium ion concentration in the range from 10(-7) M to 10(-2) M. This response is related to microscopic changes at the gold surface induced by selective binding by the immobilised calixarene.

A 2-furaldehyde-selective PVC-membrane electrode is designed based on the host-guest interaction between tetrabenzyl ether Calix[4]arene, as an ionophore, and a lipophilic hydrazone derivative generated in situ from reaction of 2-furaldehyde and Girard's reagent T. At a pH of 9.2, the electrode exhibits a Nernstian response over the 2-furaldehyde concentration range of (5.0 x 10(-5))-(1.0 x 10(-1)) M. The electrode has found to be chemically inert and of adequate stability with a response time of 15 s with a good reproducibility (+/-0.2 mV) and can be used for a long working lifetime. In order to improve the minimum detectable concentration of 2-furaldehyde, further studies have been performed using a coated graphite electrode and coated platinum and gold disks. Some analytical aspects of adsorptive square wave voltammetry have also been presented in order to elucidate the adduct formation between 2-furaldehyde and Girard's reagent T. The interfering effects of some Na(+), K(+), NH(4)(+), formaldehyde, 5-hydroxymethyl 2-furaldehyde (HMF), excess of Girard's reagent T and organic solvents such as isopropyl alcohol and N,N-dimethylformamide on the sensor's response have been studied. The viability of using the electrode for the trace determination of 2-furaldehyde in several Iranian oil refinery wastewater samples is also demonstrated. The results obtained from the developed method for real samples are compared with those from UV-spectrophotometric and high-performance liquid chromatographic experiments.

The properties of immunogens synthesized from a calix[4]crown-6 were investigated with the aim of generating specific antibodies towards caesium chelates. Affinity capillary electrophoresis was successfully used to determine the stability parameters with caesium of both the hapten and the corresponding immunogens after coupling to bovine serum albumin (BSA). Unfortunately, the stability of the caesium chelate was shown to decrease drastically as the polarity of the medium increased. Nevertheless, the selectivity was proved to be rather stable, with a clear preference of caesium over potassium. The binding mechanism for the protein conjugates proved to be complex, as revealed by isotherms, whatever the number of calixarene groups coupled to BSA. Immunization of mice with caesium loaded immunogen resulted in the production of polyclonal antibodies able to distinguish between free calixarene and its complexes with either potassium or caesium.

With the aim of generating antibodies, a calix[4]arene-crown-6 was coupled to bovine serum albumin. For that purpose, a complete procedure to optimize and characterize the coupling of hydrophobic haptens based on capillary electrophoresis (CE) was developed. We demonstrated the existence of a polynomial relationship between the electrophoretic mobility (mu(ep)) and the hapten density. This correlation was used not only to study the coupling reaction in terms of optimization and kinetics but also to determine the average coupling molar ratio of any given conjugate. An estimation of the heterogeneity of these conjugates by simulation of experimental peaks was also proposed.

Azotochelin is a biscatecholate siderophore produced by the nitrogen-fixing soil bacterium Azotobacter vinelandii. The complexation properties of azotochelin with a series of oxoanions [Mo(VI), W(VI) and V(V)] and divalent cations [Cu(II), Zn(II), Co(II) and Mn(II)] were investigated by potentiometry, UV-vis and X-ray spectroscopy. Azotochelin forms a strong 1:1 complex with molybdate (log K=7.6+/-0.4) and with tungstate and vanadate; the stability of the complexes increases in the order Mo

With the aim of generating antibodies directed towards cesium, a calix[4]arene-crown-6 in the 1,3-alternate conformation bearing an N-hydroxysuccinimide function was synthesized. The calixarene was coupled to bovine serum albumin using different calixarene/protein ratios, and cesium was loaded. Conjugates were characterized using trinitrobenzenesulfonic acid derivatization, matrix assisted laser desorption ionisation-mass spectrometry (MALDI-TOF-MS), and inductively coupled plasma-mass spectrometry (ICP-MS). Targeted lysines were determined after enzymatic cleavage followed by MALDI-TOF-MS, and a progressive targeting related to lysines accessibility was observed.

Reactions of UCl4 with 25,27-dimethoxy-5,11,17,23-tetra-tert-butylcalix[4]arene (H2Me2calix) in THF or pyridine at 80 degrees C gave [UCl2(Me2calix)L2] [L = THF (1) or pyridine (2)]. Similar treatment of U(acac)(4) (acac = MeCOCHCOMe) with H2Me2calix in THF or pyridine afforded [U(acac)2(Me2calix)] (3). The bis-calixarene compound [U(Me2calix)(H2calix)] (4) was obtained by reaction of U(OTf)4 or U(OTf)3 with H2Me2calix in pyridine at 110 degrees C. Treatment of UCl4 with H2Me2calix in pyridine at 110 degrees C gave [Mepy][UCl2(Hcalix)(py)2] (5) resulting from demethylation and acid cleavage of the methoxy groups of the calixarene ligand of 2. Adventitious traces of air were responsible for the formation of [Hpy][Mepy]4[{UCl(calix)}3(mu3-O)][UCl6] (6) during the reaction of UCl4 and H2Me2calix, and of [{U(Me2calix)(mu3-O)LiCl(THF)}2] (7) during the reaction of 2 with tBuLi. The X-ray crystal structures of 1.2THF, 2.2py, 3.0.25L (L = THF and py), 4.2py, 5, 6.3py and 7.THF have been determined.

The ditopic receptors Calix-COU1 and Calix-COU2 consist of a calix[4]biscrown containing one or two dioxycoumarin fluorophores, respectively, inserted into the crown. They can form 1:1 and 2:1 (metal:ligand) complexes with caesium ions. The photophysical properties of the 1:1 complexes can be explained by (i) cation tunneling through the tube-shaped cavity (composed of the four phenyl rings) of the calix[4]biscrown, (ii) photodisruption of the interaction between the bound cation and the oxygen atoms belonging to both the coumarin moiety and the crown, (iii) photoinduced motions of the cation.

Structural studies of seven very differently functionalised derivatives of calix[4]arene have been used to provide an analysis of the numerous factors which may influence solvent adduct formation by calixarenes. Evidence is presented that even where a solvent guest is included within the calixarene cavity, interactions solely within the cavity cannot be seen as the sole influences upon the guest position and orientation.

[structure: see text] A versatile stepwise synthetic approach to cofacial bis-porphyrin species with calix[4]arene spacers has been designed. The three examples described demonstrate that the method allows selection, in a tailor-made fashion, of the calix[4]arene conformation, the type of functionalization of the calixarene rims, and the anchoring point of the chromophores on the calix[4]arene spacer.