Search

The structure of the novel medium-pore borosilicate zeolite EMM-25 has been determined by continuous rotation electron diffraction (cRED). EMM-25 crystallizes in the space group Cmcm with unit cell parameters a = 11.055, b = 22.912, and c = 24.914 angstrom and a composition of IC4H8(C11H25N)(2)I (2)[Si112.5B3.5O232]. The EMM-25 framework possesses a two-dimensional channel system composed of 10-ring channels connected via 11-ring windows. Its channel system is analogous to that of the medium-pore zeolite NU-87 framework but with 11- rather than 12-ring windows, suggesting a different shape selectivity. EMM-25 was first obtained using 1,4-bis(N-methyl-N,N-dihexylammonium)butane as an organic structure directing agent (OSDA). Based on a molecular docking study of the OSDA within the pores of the determined framework structure, a new ammonium dication OSDA with an improved fit was devised. By using this new OSDA, the synthesis time was reduced 80%, from 52 to just 10 days. Furthermore, cRED data revealed a structural disorder of the EMM-25 framework present as swinging zigzag chains. The introduction of the disorder, which is a consequence of geometry relaxation, was crucial for an accurate structure refinement. Lastly, the cRED data from as-made EMM-25 showed residual potential consistent with the location of the OSDA position determined from the Rietveld refinement, concluding a complete refinement of the as-made structure based on the cRED data.

Two-dimensional zeolitic materials have drawn increasing attention because of their structural diversity, high accessible surface areas, and potential as precursors to form novel three-dimensional (3D) structures. Here we report a new layered fluoroaluminophosphate, denoted as EMM-9 (ExxonMobil Material #9), synthesized in the same synthesis system as that for a previously reported 3D framework structure EMM-8 (framework-type code: SFO) using an F- medium and 4-(dimethylamino)pyridine (DMAP) as the organic structure-directing agent. The structure of EMM-9 was solved from rotation electron diffraction data and refined against synchrotron powder X-ray diffraction data. The fluoroaluminophosphate layer of EMM-9 is composed of sti composite building units. The DMAP cations are located between the layers. pi-pi interactions between the DMAP cations and hydrogen bonding between the DMAP cations and layers were identified. The layered EMM-9 structure is closely related to the 3D framework structure of EMM-8 and can be transformed to EMM-8 by calcination.

The aluminosilicate zeolite ZSM-43 (where ZSM = Zeolite Socony Mobil) was first synthesized more than 3 decades ago, but its chemical structure remained unsolved because of its poor crystallinity and small crystal size. Here we present optimization of the ZSM-43 synthesis using a high-throughput approach and subsequent structure determination by the combination of electron crystallographic methods and powder X-ray diffraction. The synthesis required the use of a combination of both inorganic (Cs+ and K+) and organic (choline) structure-directing agents. High-throughput synthesis enabled a screening of the synthesis conditions, which made it possible to optimize the synthesis, despite its complexity, in order to obtain a material with significantly improved crystallinity. When both rotation electron diffraction and high resolution transmission electron microscopy imaging techniques are applied, the structure of ZSM-43 could be determined. The structure of ZSM-43 is a new zeolite framework type and possesses a unique two-dimensional channel system limited by 8-ring channels ZSM-43 is stable upon calcination, and sorption measurements show that the material is suitable for adsorption of carbon dioxide as well as methane.

The structure of a complicated pseudo-decagonal (PD) quasicrystal approximant in the Al-Co-Ni alloy system, denoted as PD1, was solved by the strong-reflections approach on three-dimensional rotation electron diffraction (RED) data, using the phases from the known PD2 structure. RED shows that the PD1 crystal is primitive and orthorhombic, with a = 37.3, b = 38.8, c = 8.2 angstrom. However, as with other approximants in the PD series, the superstructure reflections (corresponding to c = 8.2 angstrom) are much weaker than those of the main reflections (corresponding to c = 4.1 angstrom), so it was decided to solve the PD1 structure in the smaller primitive unit cell first, i.e. with unit-cell parameters a = 37.3, b = 38.8, c = 4.1 angstrom and space group Pnam. A density map of PD1 was calculated from only the 15 strongest unique reflections. It contained all 31 Co/Ni atoms and many weaker peaks corresponding to Al atoms. The structure obtained from the strong-reflections approach was confirmed by applying direct methods to the complete RED data set. Successive refinement using the RED data set resulted in 108 unique atoms (31 Co/Ni and 77 Al). This is one of the most complicated approximant structures ever solved by electron diffraction. As with other approximants in the PD series, PD1 is built of characteristic 2 nm wheel clusters with fivefold rotational symmetry, which agrees with results from high-resolution electron microscopy images. The simulated electron diffraction patterns for the structure model are in good agreement with the experimental electron diffraction patterns obtained by RED.

A series of highly porous isoreticular lanthanide-based metal organic frameworks (LnMOFs) denoted as SUMOE-7I to SUMOE-7IV (SU = Stockholm University; Ln = La, Ce, Pr, Nd, Sm, Eu, and Gd) have been synthesized using tritopic carboxylates as the organic linkers. The SUMOF-7 materials display one-dimensional pseudohexagonal channels with the pore diameter gradually enlarged from 8.4 to 23.9 angstrom, as a result of increasing sizes of the organic linkers. The structures have been solved by single crystal X-ray diffraction or rotation electron diffraction (RED) combined with powder X-ray diffraction (PXRD). The SUMOF-7 materials exhibit robust architectures with permanent porosity. More importantly, they exhibit exceptionally high thermal and chemical stability. We show that, by inclusion of organic dye molecules, the luminescence properties of the MOFs can be elaborated and modulated, leading to promising applications in sensing and optics.

A multi-dimensional extra-large pore silicogermanate zeolite, named ITQ-54, has been synthesised by in situ decomposition of the N,N-dicyclohexylisoindolinium cation into the N-cyclohexylisoindolinium cation. Its structure was solved by 3D rotation electron diffraction (RED) from crystals of ca. 1 [small mu ]m in size. The structure of ITQ-54 contains straight intersecting 20 [times] 14 [times] 12-ring channels along the three crystallographic axes and it is one of the few zeolites with extra-large channels in more than one direction. ITQ-54 has a framework density of 11.1 T atoms per 1000 A3, which is one of the lowest among the known zeolites. ITQ-54 was obtained together with GeO2 as an impurity. A heavy liquid separation method was developed and successfully applied to remove this impurity from the zeolite. ITQ-54 is stable up to 600 [degree]C and exhibits permanent porosity. The structure was further refined using powder X-ray diffraction (PXRD) data for both as-made and calcined samples.

A new germanosilicate zeolite (denoted as ITQ-53) with extra-large pores has been synthesised using tri-tertbutylmethylphosphonium cation as the organic structure directing agent (OSDA). Rotation electron diffraction (RED) was used to identify ITQ-53 from an initially-synthesised sample containing impurities, and to solve its structure. The structure was refined against PXRD data of pure ITQ-53 samples obtained after synthesis optimisation. ITQ-53 is the first example of extra-large pore zeolites with tri-directional interconnected 14 x 14 x 14-ring channels. It is stable up to at least 650 degrees C. The structure of ITQ-53 changes from monoclinic to orthorhombic upon calcination., AuthorCount:8

Phase identification and structure determination are important and widely used techniques in chemistry, physics and materials science. Recently, two methods for automated three-dimensional electron diffraction (ED) data collection, namely automated diffraction tomography (ADT) and rotation electron diffraction (RED), have been developed. Compared with X-ray diffraction (XRD) and two-dimensional zonal ED, three-dimensional ED methods have many advantages in identifying phases and determining unknown structures. Almost complete three-dimensional ED data can be collected using the ADT and RED methods. Since each ED pattern is usually measured off the zone axes by three-dimensional ED methods, dynamic effects are much reduced compared with zonal ED patterns. Data collection is easy and fast, and can start at any arbitrary orientation of the crystal, which facilitates automation. Threedimensional ED is a powerful technique for structure identification and structure solution from individual nano-or micron-sized particles, while powder X-ray diffraction (PXRD) provides information from all phases present in a sample. ED suffers from dynamic scattering, while PXRD data are kinematic. Three-dimensional ED methods and PXRD are complementary and their combinations are promising for studying multiphase samples and complicated crystal structures. Here, two three-dimensional ED methods, ADTand RED, are described. Examples are given of combinations of three-dimensional ED methods and PXRD for phase identification and structure determination over a large number of different materials, from Ni-Se-O-Cl crystals, zeolites, germanates, metal-organic frameworks and organic compounds to intermetallics with modulated structures. It is shown that three-dimensional ED is now as feasible as X-ray diffraction for phase identification and structure solution, but still needs further development in order to be as accurate as X-ray diffraction. It is expected that three-dimensional ED methods wil

[EN] A new germanosilicate zeolite (denoted as ITQ-53) with extra-large pores has been synthesised using tri-tertbutylmethylphosphonium cation as the organic structure directing agent (OSDA). Rotation electron diffraction (RED) was used to identify ITQ-53 from an initially-synthesised sample containing impurities, and to solve its structure. The structure was refined against PXRD data of pure ITQ-53 samples obtained after synthesis optimisation. ITQ-53 is the first example of extra-large pore zeolites with tri-directional interconnected 14 x 14 x 14-ring channels. It is stable up to at least 650 degrees C. The structure of ITQ-53 changes from monoclinic to orthorhombic upon calcination.

Knowing the structure of porous materials is essential for understanding their properties and exploiting them for applications. Electron crystallography has two main advantages compared to X-ray diffraction for structure determination. Crystals too small or too complicated to be studied by X-ray diffraction can be studied by electron crystallography. The crystallographic structure factor phase information, which is lost in X-ray diffraction, can be obtained from high-resolution transmission electron microscopy (HRTEM) images. Here, different electron microscopic techniques and their applications for structure determination of porous materials are reviewed. The recently developed automated diffraction tomography (ADT), the rotation electron diffraction (RED), and the through-focus structure projection reconstruction (QFcous) methods make the structure determination by electron crystallography more feasible for non-TEM experts and as efficient as that by X-ray diffraction. How the various electron crystallographic methods are chosen are demonstrated and these methods used for solving different structural problems in porous materials. The benefits of combining electron crystallography and X-ray diffraction for studying complex zeolite structures are also shown. A large number of examples are given to demonstrate the use of various electron crystallographic techniques for structure determination of zeolites, metal-organic frameworks and ordered mesoporous materials. These electron crystallographic methods are general and can also be used for structural studies of other functional materials., AuthorCount: 3

Phase identification and structure characterization are important in synthetic and materials science. It is difficult to characterize the individual phases from multiphase crystalline powder samples, especially if some of the phases are unknown. This problem can be solved by combining rotation electron diffraction (RED) and powder X-ray diffraction (PXRD). Four phases were identified on the same transmission electron microscopy grid from a multiphase sample in the Ni-Se-O-Cl system, and their structures were solved from the RED data. Phase 1 (NiSeO3) was found in the Inorganic Crystal Structure Database using the information from RED. Phase 2 (Ni3Se4O10Cl2) is an unknown compound, but it is isostructural to Co3Se4O10Cl2, which was recently solved by single-crystal X-ray diffraction. Phase 3 (Ni5Se6O16Cl4H2) and Phase 4 (Ni5Se4O12Cl2) are new compounds. The fact that there are at least four different compounds in the as-synthesized material explains why the phase identification and structure determination could not be done by PXRD alone. The RED method makes phase identification from such multiphase powder samples much easier than would be the case using powder X-ray diffraction. The RED method also makes structure determination of submicrometre-sized crystals from multiphase samples possible.

Particles of iron oxide (Fe3O4; 20-40nm) were embedded within activated carbons during the activation of hydrothermally carbonized (HTC) biomasses in a flow of CO2. Four different HTC biomass samples (horse manure, grass cuttings, beer production waste, and biosludge) were used as precursors for the activated carbons. Nanoparticles of iron oxide formed from iron catalyst included in the HTC biomasses. After systematic optimization, the activated carbons had specific surface areas of about 800m(2)g(-1). The pore size distributions of the activated carbons depended strongly on the degree of carbonization of the precursors. Activated carbons prepared from highly carbonized precursors had mainly micropores, whereas those prepared from less carbonized precursors contained mainly mesopores. Given the strong magnetism of the activated carbon-nano-Fe3O4 composites, they could be particularly useful for water purification., AuthorCount:5

Electron diffraction is a complementary technique to single-crystal X-ray diffraction and powder X-ray diffraction for structure solution of unknown crystals. Crystals too small to be studied by single-crystal X-ray diffraction or too complex to be solved by powder X-ray diffraction can be studied by electron diffraction. The main drawbacks of electron diffraction have been the difficulties in collecting complete three-dimensional electron diffraction data by conventional electron diffraction methods and the very time-consuming data collection. In addition, the intensities of electron diffraction suffer from dynamical scattering. Recently, a new electron diffraction method, rotation electron diffraction (RED), was developed, which can overcome the drawbacks and reduce dynamical effects. A complete three-dimensional electron diffraction data set can be collected from a sub-micrometre-sized single crystal in less than 2 h. Here the RED method is applied for ab initio structure determination of an unknown complex intermetallic phase, the pseudo-decagonal (PD) quasicrystal approximant Al-37.0(Co,Ni)(15.5), denoted as PD2. RED shows that the crystal is F-centered, with a = 46.4, b = 64.6, c = 8.2 angstrom. However, as with other approximants in the PD series, the reflections with odd l indices are much weaker than those with l even, so it was decided to first solve the PD2 structure in the smaller, primitive unit cell. The basic structure of PD2 with unit-cell parameters a = 23.2, b = 32.3, c = 4.1 angstrom and space group Pnmm has been solved in the present study. The structure with c = 8.2 angstrom will be taken up in the near future. The basic structure contains 55 unique atoms (17 Co/Ni and 38 Al) and is one of the most complex structures solved by electron diffraction. PD2 is built of characteristic 2 nm wheel clusters with fivefold rotational symmetry, which agrees with results from high-resolution electron microscopy images. Simulated electron diffraction patterns, AuthorCount:6

Stable, multidimensional, and extra-large pore zeolites are desirable by industry for catalysis and separation of bulky molecules. Here we report EMM-23, the first stable, three-dimensional extra-large pore aluminosilicate zeolite. The structure of EMM-23 was determined from submicron-sized crystals by combining electron crystallography, solid-state nuclear magnetic resonance (NMR), and powder X-ray diffraction. The framework contains highly unusual trilobe-shaped pores that are bound by 21-24 tetrahedral atoms. These extra-large pores are intersected perpendicularly by a two-dimensional 10-ring channel system. Unlike most ideal zeolite frameworks that have tetrahedral sites with four next-nearest tetrahedral neighbors (Q(4) species), this unusual zeolite possesses a high density of Q(2) and Q(3) silicon species. It is the first zeolite prepared directly with Q(2) species that are intrinsic to the framework. EMM-23 is stable after calcination at 540 °C. The formation of this highly interrupted structure is facilitated by the high density of extra framework positive charge introduced by the dicationic structure directing agent.

The combination of different experimental techniques, such as solid C-13 and H-1 magic-angle spinning NMR spectroscopy, fluorescence spectroscopy and powder X-ray diffraction, together with theoretical calculations allows the determination of the unique structure directing the role of the bulky aromatic proton sponge 1,8-bis(dimethylamino)naphthalene (DMAN) towards the extra-large-pore ITQ-51 zeolite through supra-molecular assemblies of those organic molecules.

Layered solids often form thin plate-like crystals that are too small to be studied by single-crystal X-ray diffraction. Although powder X-ray diffraction (PXRD) is the conventional method for studying such solids, it has limitations because of peak broadening and peak overlapping. We have recently developed a software-based rotation electron diffraction (RED) method for automated collection and processing of 3D electron diffraction data. Here we demonstrate the ab initio structure determination of two interlayer expanded zeolites, the microporous silicates COE-3 and COE-4 (COE-n stands for International Network of Centers of Excellence-n), from submicron-sized crystals by the RED method. COE-3 and COE-4 are built of ferrierite-type layers pillared by (-O-Si(CH3)(2)-O-) and (-O-Si(OH)(2)-O-) linker groups, respectively. The structures contain 2D intersecting 10-ring channels running parallel to the ferrierite layers. Because both COE-3 and COE-4 are electron-beam sensitive, a combination of RED datasets from 2 to 3 different crystals was needed for the structure solution and subsequent structure refinement. The structures were further refined by Rietveld refinement against the PXRD data. The structure models obtained from RED and PXRD were compared., AuthorCount:9