Search

A series of D-π-A, D-π-D'-π-A, D-π-A'-π-A nonlinear optical chromophores with vinylene π-electron bridges or bridges with π-deficient/π-excessive heterocyclic moieties along with the corresponding precursors D-vinylene, D-π-D', D'-π-A, D-π-A' and A'-π-A are synthesized and studied both experimentally and computationally. The effect of the heterocycle in the π-electron bridge on the oxidation/reduction potentials and the energy gap (ΔEel ) is investigated in detail. The properties of the D-π-A'(D')-π-A chromophores are shown to correlate with those of building blocks: the oxidation potential is determined by the D-vinylene, and the reduction potential is determined by A'(D')-π-A truncated compounds. The contribution of the acceptor to the oxidation potential of chromophores in comparison with those of the precursors was estimated and analyzed in terms of electronic communication between the end groups. A good correlation between the ΔEel and the chromophores' first hyperpolarizability is revealed.

Nickel anions [(MeCN)Ni(CF3)3]− and [Ni(CF3)4]2– were prepared by the formal addition of 3 and 4 equiv, respectively, of AgCF3 to [(dme)NiBr2] in the presence of the [PPh4]+ counterion. Detailed in...

The deprotonation of N-2,6-diisopropylphenyl-substituted benzoxazolium tetrafluoroborate 1 with NaH results in the formation of electron-rich diaminodioxaethylene 2. The radical cation salt 2·+·BF4– is found to be an intermediate product in the redox reaction leading from 1 to 2.

The nickel anions [(MeCN)Ni(CF3)3]1– and [Ni(CF3)4]2– were prepared by formal addition of three and four equivalents of [AgCF3] to [(dme)NiBr2] in the presence of supporting [PPh4] counter-ion. Detailed insights into the electronic properties of these new compounds were obtained through the use of density functional theory (DFT) calculations, spectroscopy-oriented configuration interaction (SORCI) calculations, X-ray absorption spectroscopy, and cyclic voltammetry. The data collectively show that trifluoromethyl complexes of nickel, even in the most common oxidation state of nickel(II), are highly covalent systems whereby a hole is distributed on the trifluoromethyl ligands and surprisingly rendering the metal to a physically more reduced state. In the cases of [(MeCN)Ni(CF3)3]1– and [Ni(CF3)4]2–, these complexes are better described as physically d9 metal complexes. [(MeCN)Ni(CF3)3]1– is electrophilic and reacts with other nucleophiles like phenoxide to yield the unsupported [(PhO)Ni(CF3)3]2– salt, revealing the broader potential of [(MeCN)Ni(CF3)3]1– in the development of ligandless trifluoromethylations at nickel. Proof-in-principle experiments show that reaction of [(MeCN)Ni(CF3)3]1– with an aryl iodonium salt yields trifluoromethylated arene, presumably via a high valent, unsupported, and formally organonickel(IV) intermediate. Evidence for the feasibility of such intermediates is provided with the structurally characterized [Ni(CF3)4(SO4)][PPh4]2, which was derived through the two electron oxidation of [Ni(CF3)4]2–.

Recent achievements of electrochemical efficient and atom-economical catalytic methods for the formation of aromatic carbon-phosphorus bonds are summarized in this mini-review. Electrochemical reac...

This paper elucidates the redox properties and reactivity of a number of cyclometalated nickel(II) complexes in oxidation processes. Original and robust procedures for the synthesis of nickelacycles with two cyclometalated moieties and halogenated nickelacycles were developed. The complexes were studied by means of electrochemical, ESR, DFT, and single-crystal XRD methods. Notable features of the nickelacycles are unusually low oxidation potentials. Upon electrochemical oxidation the complexes produce carbon–carbon and carbon–heteroatom coupled products, the ratio of which can be tuned by the conditions applied.

For the first time the nonlinear optical (NLO) activity of indolizine-based push-pull chromophores with different acceptor moieties was studied and compared. All the chromophores demonstrate strong absorption band in the visible (orange-red) part of the spectrum, with e of ca. 105 L∙cm−1∙M−1 notably dependent on medium polarity. Replacement of Ph-TCF acceptor by Hex-TCP one results in twofold increase of the first hyperpolarizability value. Energy gaps estimated by electrochemical methods decrease in the series ΔE1a,b>ΔE3a,b>ΔE2a,b for compounds with Ph-TCF, DCM and Hex-TCP acceptors, respectively, good agreement with DFT estimations is obtained. The nonlinear optical coefficient for poled PMMA-based films, containing 20 wt% of isomeric indolizine chromophores with weaker dicyanomethylene (DCM) acceptor and with π- bridge expanded by isophorone moiety, achieves 36 pm/V, thus exceeding those for materials containing chromophores with stronger Ph-TCF or Hex-TCP acceptors and with short vinylene π-bridge.

Four chromophores belonging to a new class of push-pull chromophores with divinylphenylquinoxaline moieties have been designed and synthesized. The structure-property relationship was systematically investigated; the effect of the conformation on the value of chromophores first hyperpolarizability is found to be inessential. Quinoxaline-based chromophore with TCF acceptor and 7-dimethylanilinovinyl moiety displays the combination of favorable characteristics: the high value of the first hyperpolarizability, the small HOMO-LUMO energy gap, the blue shift of the absorption maximum relative to the chromophores with other divinylhetaryl or polyene π-bridges and ultrahigh thermal stability. This chromophore may be considered as a perfect candidate for the development of effective electro-optic materials.

Two series of isomeric indolizine-based chromophores with isophorone rings as a π-bridge have been synthesized and systematically investigated. The chromophores have a high thermal stability: the decomposition temperature is above 238 °C. For isomers with 1-methyl-2-phenylindolizin-3-yl (MPI-3) donor group higher values of β are predicted in comparison with those having 3-methyl-2-phenylindolizin-1-yl (MPI-1) donor group. This is in good agreement with the experimental and theoretical values of the HOMO-LUMO energy gap. Indolizine-based chromophores with barbituric acceptor and isophorone moieties in the π-bridge demonstrate the combination of good characteristics.

The two-electron reduction of some Ni(II) complexes with α-diimine ligands ([Ni(bpy)3]2+ and [Ni(pybox)2]2+) at a platinum electrode from acetonitrile (AN) and dimethylformamide (DMF) solutions is investigated by cyclic voltammetry (CV). Digisim simulations are employed to determine kinetic parameters. For [Ni(bpy)3]2+ in AN the first electron transfer (ET) step was found to be rate-controlling. The rate constants of the first and second steps (k1 and k2) are practically the same in the DMF solution. In contrast, the second ET step is rate controlling for the [Ni(pybox)2]2+ complex in AN, while the difference between k1 and k2 for this complex reactant in DMF becomes less noticeable. Molecular modeling based on the quantum mechanical theory of electron transfer and on density functional theory (DFT) calculations is performed for the first time to predict the activation barriers of the two-step heterogeneous redox processes and to elucidate the role of the ligands and solvents in the kinetics of these processes. Three-dimensional reaction free energy surfaces are constructed along the solvent and intramolecular coordinates. The electronic transmission coefficients are estimated as well. The results of model calculations are in qualitative agreement with the experimental data.

A method of synthesis of a new class of push-pull chromophores with vinylquinoxalinone conjugated bridges has been proposed; two isomeric pairs of chromophores with dimethyl aniline donor and dicyanovinyl or tricyanofuran acceptors linked via vinyl-7(6)-quinoxalinon-3-yl or vinyl-7(6)-quinoxalinone-3-vinyl bridges, correspondingly, have been synthesized and systematically investigated. The solvatochromic behavior, thermal stability and electrochemical properties were studied to establish the structure-property relationships. Chromophore 7-DMA-VQ on V-TCF exhibits the minimal HOMO-LUMO energy gap (ΔE 0.84 eV) and the highest thermal stability (T d = 313 °C).

The development of practical, efficient and atom-economical methods of formation of carbon-phosphorus bonds remains a topic of considerable interest for the current synthetic organic chemistry and electrochemistry. This review summarizes selected topics from the recent publications with particular emphasis on phosphine and phosphine oxides formation from white phosphorus, chlorophosphines in electrocatalytic processes using aryl, hetaryl or perfluoroalkyl halides as reagents. This review includes selected highlights concerning recent progress in modification of catalytic systems for aromatic C–H bonds phosphonation involving metal-catalyzed ligand directed or metal-induced oxidative processes. Furthermore, a part of this review is devoted to phosphorylation of olefins with white phosphorus under reductive conditions in water-organic media. Finally, we have also documented recent advances in ferrocene C–H activation and phosphorylation.

Data provided by electrochemical studies are of particular interest for nonlinear optical chromophores being used to predict the properties and search more effective donor-acceptor systems. Based on voltammetric experiments (CV, DPV), one can estimate the HOMO and LUMO energy gap and correlate it with the structure, analyze solvatochromic effects, and obtain additional important information about changes in the energy of each molecular orbital, and not only the gap itself (an advantage over optical methods). Also, the location of the gap relative to the energy axis (electrochemical electronegativity) allows to identify the more hyperpolarizable chromophores. This review summarizes the results obtained in recent years in the field of chromophore electrochemistry elucidating the relationship between molecular NLO characteristics predicted on the basis of quantum-chemical calculations (the hyperpolarizability) and energy characteristics of promising chromophores.

Chromophores with charged heterocyclic acceptor moiety in combination with divinylquinoxaline conjugated π-bridge show a significant solvatochromic shift, small energy gap value (determined by various methods), and large values of the first hyperpolarizability estimated by DFT. A quinoxaline-based chromophore with an indolium acceptor exhibits an outstanding solvatochromic shift (0.38 eV), probably a record one for D-π-A chromophores with a dialkyl aniline donor moiety. A good correlation between the above characteristics and the calculated NBO π-charge on the aniline nitrogen atom has been found. A change in the trend by opposite one in the characteristics in the series of quinolinium /benzothiazolium/ indolium chromophores is exhibited when passing from gas to solvent.

Novel D-π-A chromophores with quinoxaline/quinoxalinone core in the π-conjugated bridge and various bulky groups in the acceptor moiety have been synthesized and systematically investigated at molecular level by UV–Vis spectroscopy, DFT calculations, electrochemical and TGA-DSC methods as well as at materials level by the example of PMMA-based composite polymer materials doped with different chromophore contents using molecular modeling and SHG technique. Chromophores exhibit positive dioxane/chloroform solvatochromic shift of ca. 50 nm, high values of first hyperpolarizability and dipole moment, small energy gap and good thermal stability. Tolyl and cyclohexylphenyl substituents unlike phenyl can be treated as most effective isolating groups, preventing chromophore pronounced aggregation even at 30 wt% content. Femtosecond nonlinear optical (NLO) activity was studied for poled thin guest-host polymer films with various chromophore weight content. Film DBA-VQPhV-TCFPhCy(25 wt%)/PMMA with bulky cyclohexylphenyl groups in chromophore acceptor shows maximal NLO coefficient, d33, values among the studied materials (37 pm/V) as well as good long-term stability of NLO response together with excellent chromophore thermal stability (Td = 256 °C). Composite materials doped with quinoxaline chromophores are photostable with respect to laser pulses with peak intensities up to 11 GW/cm2.

The electrochemical and electrophysical properties of fullerene C 60 derivatives containing an amino group at the methanofullerene bridging carbon atom and a tetrahydropyridine moiety annelated to the fullerene have been determined. The electrochemical reduction of the derivatives was found to proceed less easily than that of C 60 but more easily than that of unsubstituted methano- and pyrrolidinofullerenes.

Two isomeric indolizine-based chromophores (MPI-1)-OT-TCF and (MPI-3)-OT-TCF with octatetraene π-bridge and tricyanofuran acceptor moieties have been synthesized and systematically investigated. Chromophores exist as a mixture of E- and Z-isomers in low-polar dioxane and chloroform solutions, while in polar solvents only one isomer is observed. The chromophores show excellent thermal stability with Td>260 °C (DSC) and small energy gap between the frontier orbitals (about 0.8–0.9 eV) established by DPV method. The chromophores exhibit absorption in the visible and near IR region. Solvatochromic shifts amounting to ca. 100 nm when passing from dioxane to DMSO solutions are accompanied by appearance of an additional narrow intensive absorption band at ca. 915–950 nm resulting from the cross of cyanine limit. For the first time electro-optic activity of composite materials doped by indolizine based chromophores have been investigated; EO coefficient of poled (MPI-3)-OT-TCF/PMMA film afforded value of 29 pm/V at 10 wt% load.

A series of diphosphonate-bridged dipalladacycles [(phpy)Pd(EtO)2P(O)]2, [(bhq)Pd(EtO)2P(O)]2, [(phpz)Pd(EtO)2P(O)]2 (phpy=2-phenylpyridine, bhq=benzo[h]quinoline, phpz=1-phenylpyrazole), which are known to be involved in catalytic C–H phosphonation reactions, was prepared and characterized by NMR spectroscopy and cyclic voltammetry in acetonitrile solutions and in carbon paste electrode. Diphosphonate dipalladacycles are oxidized irreversibly at more positive potentials as distinguished from related acetate palladacycles. Electrochemical preparative oxidations carried out under mild conditions without any specially added oxidants quantitatively afforded corresponding arylphosphonates. For complete conversion of dipalladacycles into arylphosphonates, four electrons per each palladium atom are required, that probably indicates a mechanism involving Pd(IV)/Pd(II) redox couple.

The [C4F8] ligand was shown to support well-defined terpyridyl nickel complexes in the +2 and +3 oxidation states. Notably, a cyclic voltammetry study of the nickel(iii) species indicates that an additional oxidation is accessible, providing a family of related fluoroalkyl nickel complexes spanning the +2 to +4 oxidation states.

New well-defined, paramagnetic nickel complexes have been prepared and characterized by X-ray crystallography. The complexes were found to be active for the cross-coupling of alkyl electrophiles (especially ethyl 2-bromobutyrate) with alkyl Grignard reagents. The ligand architecture in these new complexes could potentially be rendered chiral, opening up future possibilities for performing asymmetric cross-coupling reactions.

Principal achievements and modern trends in the development of new methods of electrocatalytic fluoroalkylation are analysed and generalised. Possibilities and advantages of the electrochemical preparation of fluoroalkyl compounds are demonstrated. The attention is focused on the fluoroalkylation of olefins, σ-fluororganonickel complexes reactivity, aromatic perfluoroalkylation, fluoroalkyl phosphines and phosphine oxides synthesis, ligand directed C–H-fluoroalkylation.

Novel versatile electrocatalytic route for obtaining fluoroalkylated phosphines and phosphine oxides from white phosphorous or diphenylchlorophosphine is discussed. This process occurs under electrochemical generation of nickel complexes in low oxidation state during undivided electrolysis of organofluorine iodides and phosphorous-containing substrate in mild conditions without supporting electrolyte.

The electochemical oxidation of palladium acetate or palladium perfluoroacetate in the presence of 2-phenylpyridine promotes catalytic ortho C–H substitution reactions. As possible intermediates, Pd(II) metallacycles with Pd-bound acetate, perfluoroacetate, and perfluoroheptanoate substituents have been isolated and characterized: binuclear [(PhPy)Pd(μ-OAc)]2 and [(PhPy)Pd(μ-TFA)]2 and mononuclear [(PhPy)Pd(TFA)](CH3CN), [(PhPy)Pd(TFA)](PhPy), and [(PhPy)Pd(PFH)](PhPy). The fluorinated derivatives were found to exist in solvent-dependent equilibria between mononuclear and binuclear forms. Cyclic voltammetry was used to elucidate redox properties of the palladacycles and the oxidation route to the final products.

A series of diverse binuclear and mononuclear cyclometalated palladium(II) complexes of different structure was investigated by electrochemical techniques combined with density functional theory (DFT) calculations. The studies including cyclic and differential pulse voltammetry, X-ray structure analysis and quantum chemical calculations revealed a regularity of the complexes oxidation potential on the metal–metal distance in the complexes: the larger Pd–Pd distance, the higher oxidation potentials. The reduction potentials feature unusually high negative values while no correlation depending on the structure could be observed. These results are in a good agreement with the electron density distribution in the complexes. Additionally, ESR data obtained for the complexes upon oxidation is reported.

A one-step catalytic method for the ortho-fluoroalkylation of 2-phenylpyridine has been developed that employs the less-commonly used higher oxidation states of nickel or palladium by electro-oxidation of stable MII precursors.

Ni-catalyzed electroreductive olefin perfluoroalkylation affords both monomeric and dimeric products depending on the reaction media. Recycling of the catalyst can be achieved by immobilization of a (bpy)NiBr2 complex on silica nanoparticles decorated with anchoring amino-groups. Switching the homogeneous and heterogeneous catalysts is found to be one more factor to control the product ratio. This catalytic technique is both green and atom economical and combines the advantages of nanoheterogeneous catalysis and electrocatalysis.

Principal achievements and modern trends in the development of new methods of electrocatalytic fluoroalkylation are analysed and generalised. Possibilities and advantages of the electrochemical preparation of fluoroalkyl compounds are demonstrated. The attention is focused on the fluoroalkylation of olefins, σ-fluororganonickel complexes reactivity, aromatic perfluoroalkylation, fluoroalkyl phosphines and phosphine oxides synthesis, ligand directed C–H-fluoroalkylation.

Electrolysis of organofluorine iodides and white phosphorus or diphenylchlorophosphine in the presence of a Ni-catalyst results in the formation of fluoroalkyl phosphines.