Search

The Kondo effect between localized $f$-electrons and conductive carriers leads to exotic physical phenomena. Among them, heavy-fermion (HF) systems, in which massive effective carriers appear due to the Kondo effect, have fascinated many researchers. Dimensionality is also an important characteristic of the HF system, especially because it is strongly related to quantum criticality [S. Sachdev, Science 288, 475 (2000)]. However, perfect two-dimensional (2D) HF materials have not been reported yet. Here, we report the surface electronic structure of the monoatomic-layer Kondo lattice YbCu$_2$ on a Cu(111) surface observed by synchrotron-based angle-resolved photoelectron spectroscopy. The 2D conducting band and the Yb 4$f$ state, located very close to the Fermi level, are observed. These bands are hybridized at low-temperature, forming the 2D HF state, with an evaluated coherent temperature of about 30 K. The effective mass of the 2D state is enhanced by a factor of 100 by the development of the HF state. Furthermore, clear evidence of the hybridization gap formation in the temperature dependence of the Kondo-resonance peak has been observed below the coherent temperature. Our study provides a new candidate as an ideal 2D HF material for understanding the Kondo effect at low dimensions., Comment: 24 pages, 10 figures

The electronic structure changes of SmS surfaces under potassium (K) doping are elucidated using synchrotron-based core-level photoelectron spectroscopy and angle-resolved photoelectron spectroscopy (ARPES). The Sm core-level and ARPES spectra indicate that the Sm mean valence of the surface increased from the nearly divalent to trivalent states, with increasing K deposition. Carrier-induced valence transition (CIVT) from Sm$^{2+}$ to Sm$^{3+}$ exhibits a behavior opposite to that under conventional electron doping. Excess electrons are trapped by isolated excitons, which is inconsistent with the phase transition from the black insulator with Sm$^{2+}$ to the gold metal with Sm$^{3+}$ under pressure. This CIVT helps to clarify the pressure-induced black-to-golden phase transition in this material, which originates from the Mott transition of excitons., Comment: 7 pages, 6 figures

This study investigated the electronic structure of SrTi$_{1-x}$V$_x$O$_3$ (STVO) thin films, which are solid solutions of strongly correlated transparent conductive oxide (TCO) SrVO$_3$ and oxide semiconductor SrTiO$_3$, using ${in situ}$ photoemission spectroscopy. STVO is one of the most promising candidates for correlated-metal TCO because it has the capability of optimizing the performance of transparent electrodes by varying ${x}$. Systematic and significant spectral changes were found near the Fermi level (${E_{\rm F}}$) as a function of ${x}$, while the overall electronic structure of STVO is in good agreement with the prediction of band structure calculations. As ${x}$ decreases from 1.0, spectral weight transfer occurs from the coherent band near ${E_{\rm F}}$ to the incoherent states (lower Hubbard band) around 1.0-1.5 eV. Simultaneously, a pseudogap is formed at ${E_{\rm F}}$, indicating a significant reduction in quasiparticle spectral weight within close vicinity of ${E_{\rm F}}$. This pseudogap seems to evolve into an energy gap at ${x}$ = 0.4, suggesting the occurrence of a composition-driven metal-insulator transition. From angle-resolved photoemission spectroscopic results, the carrier concentration ${n}$ changes proportionally as a function of ${x}$ in the metallic range of ${x}$ = 0.6-1.0. In contrast, the mass enhancement factor, which is proportional to the effective mass (${m^*}$), does not change significantly with varying ${x}$. These results suggest that the key factor of ${n/m^*}$ in optimizing the performance of correlated-metal TCO is tuned by ${x}$, highlighting the potential of STVO to achieve the desired TCO performance in the metallic region., Comment: 32 pages, 5 main figures, and 7 supplementary figures

SrMoO$_3$ is a promising material for its excellent electrical conductivity, but growing high-quality thin films remains a challenge. Here we synthesized epitaxial films of SrMoO$_3$ using the molecular beam epitaxy (MBE) technique under a low oxygen-flow rate. Introduction of SrTiO$_3$ buffer layers of 4--8 unit cells between the film and the (001)-oriented SrTiO$_3$ or KTaO$_3$ substrate was crucial to remove impurities and/or roughness of the film surface. The obtained film shows improved electrical conductivities as compared with films obtained by other techniques. The high quality of the SrMoO$_3$ film is also verified by angle-resolved photoemission spectroscopy (ARPES) measurements showing clear Fermi surfaces., Comment: 6 pages, 5 figures

SmO thin film is a new Kondo system showing a resistivity upturn around 10 K and was theoretically proposed to have a topologically nontrivial band structure. We have performed hard x-ray and soft x-ray photoemission spectroscopy to elucidate the electronic structure of SmO. From the Sm 3$d$ core-level spectra, we have estimated the valence of Sm to be $\sim$2.96, proving that the Sm has a mixed valence. The valence-band photoemission spectra exhibit a clear Fermi edge originating from the Sm 5$d$-derived band. The present finding is consistent with the theory suggesting a possible topological state in SmO and show that rare-earth monoxides or their heterostructures can be a new playground for the interplay of strong electron correlation and spin-orbit coupling.

Heterostructures having both magnetism and topology are promising materials for the realization of exotic topological quantum states while challenging in synthesis and engineering. Here, we report natural magnetic van der Waals heterostructures of (MnBi2Te4)m(Bi2Te3)n that exhibit controllable magnetic properties while maintaining their topological surface states. The interlayer antiferromagnetic exchange coupling is gradually weakened as the separation of magnetic layers increases, and an anomalous Hall effect that is well coupled with magnetization and shows ferromagnetic hysteresis was observed below 5 K. The obtained homogeneous heterostructure with atomically sharp interface and intrinsic magnetic properties will be an ideal platform for studying the quantum anomalous Hall effect, axion insulator states, and the topological magnetoelectric effect., Comment: 40 pages, 15 figures

To investigate the relationship between the charge redistribution and ferromagnetism at the heterointerface between perovskite transition-metal oxides LaNiO$_3$ (LNO) and LaMnO$_3$ (LMO), we performed x-ray absorption spectroscopy and x-ray magnetic circular dichroism (XMCD) measurements. In the LNO/LMO heterostructures with asymmetric charge redistribution, the electrons donated from Mn to Ni ions are confined within one monolayer (ML) of LNO at the interface, whereas holes are distributed over 3-4 ML on the LMO side. A detailed analysis of the Ni-$L_{2,3}$ and Mn-$L_{2,3}$ XMCD spectra reveals that Ni magnetization is induced only by the Ni$^{2+}$ ions in the 1 ML LNO adjacent to the interface, while the magnetization of Mn ions is increased in the 3-4 ML LMO of the interfacial region. The characteristic length scale of the emergent (increased) interfacial ferromagnetism of the LNO (LMO) layers is in good agreement with that of the charge distribution across the interface, indicating a close relationship between the charge redistribution due to the interfacial charge transfer and the ferromagnetism of the LNO/LMO interface. Furthermore, the XMCD spectra clearly demonstrate that the vectors of induced magnetization of both ions are aligned ferromagnetically, suggesting that the delicate balance between the exchange interactions occurring inside each layer and across the interface may induce the canted ferromagnetism of Ni$^{2+}$ ions, resulting in weak magnetization in the 1 ML LNO adjacent to the interface., Comment: 22 pages, 4 figures

In order to study the origin of metallization of VO$_2$ induced by electron injection, we deposit K atoms onto the surface of VO$_2$ films grown on TiO$_2$ (001) substrates, and we investigate the change in the electronic and crystal structures using ${in~situ}$ photoemission spectroscopy and x-ray absorption spectroscopy (XAS). The deposition of K atoms onto a surface of insulating monoclinic VO$_2$ leads to a phase transition from insulator to metal. In this metallization state, the V-V dimerization characteristic to the monoclinic phase of VO$_2$ still exists, as revealed by the polarization dependence of the XAS spectra. Furthermore, the monoclinic metal undergoes a transition to a monoclinic insulator with decrease in temperature, and to a rutile metal with increase in temperature. These results indicate the existence of a metallic monoclinic phase around the boundary between the insulating monoclinic and metallic rutile phases in the case of electron-doped VO$_2$., Comment: 20 pages, 5 figures

Engineering atomic-scale structures allows great manipulation of physical properties and chemical processes for advanced technology. We show that the B atoms deployed at the centers of honeycombs in boron sheets, borophene, behave as nearly perfect electron donors for filling the graphitic $\sigma$ bonding states without forming additional in-plane bonds by first-principles calculations. The dilute electron density distribution owing to the weak bonding surrounding the center atoms provides easier atomic-scale engineering and is highly tunable via in-plane strain, promising for practical applications, such as modulating the extraordinarily high thermal conductance that exceeds the reported value in graphene. The hidden honeycomb bonding structure suggests an unusual energy sequence of core electrons that has been verified by our high-resolution core-level photoelectron spectroscopy measurements. With the experimental and theoretical evidence, we demonstrate that borophene exhibits a peculiar bonding structure and is distinctive among two-dimensional materials., Comment: 5 pages, 3 figures, 1 table

We report the epitaxial growth of Ca3SnO antiperovskite oxide films on (001)-oriented cubic yttria-stabilized zirconia (YSZ) substrates by using a conventional pulsed laser deposition (PLD) technique. In this work, a sintered Ca3SnO pellet is used as the ablation target. X-ray diffraction measurements demonstrate the (001) growth of Ca3SnO films with the antiperovskite structure and a cube-on-cube orientation relationship to the YSZ substrate. The successful synthesis of the antiperovskite phase is further confirmed by x-ray photoemission spectroscopy. These results strongly suggest that antiperovskite-oxide films can be directly grown on substrates from the target material using a PLD technique.

Controlling quantum critical phenomena in strongly correlated electron systems, which emerge in the neighborhood of a quantum phase transition, is a major challenge in modern condensed matter physics. Quantum critical phenomena are generated from the delicate balance between long-range order and its quantum fluctuation. So far, the nature of quantum phase transitions has been investigated by changing a limited number of external parameters such as pressure and magnetic field. We propose a new approach for investigating quantum criticality by changing the strength of quantum fluctuation that is controlled by the dimensional crossover in metallic quantum well (QW) structures of strongly correlated oxides. With reducing layer thickness to the critical thickness of metal-insulator transition, crossover from a Fermi liquid to a non-Fermi liquid has clearly been observed in the metallic QW of SrVO$_3$ by \textit{in situ} angle-resolved photoemission spectroscopy. Non-Fermi liquid behavior with the critical exponent ${\alpha} = 1$ is found to emerge in the two-dimensional limit of the metallic QW states, indicating that a quantum critical point exists in the neighborhood of the thickness-dependent Mott transition. These results suggest that artificial QW structures provide a unique platform for investigating novel quantum phenomena in strongly correlated oxides in a controllable fashion., Comment: 6 pages, 3 figures

Honeycomb structures of group IV elements can host massless Dirac fermions with non-trivial Berry phases. Their potential for electronic applications has attracted great interest and spurred a broad search for new Dirac materials especially in monolayer structures. We present a detailed investigation of the \beta 12 boron sheet, which is a borophene structure that can form spontaneously on a Ag(111) surface. Our tight-binding analysis revealed that the lattice of the \beta 12-sheet could be decomposed into two triangular sublattices in a way similar to that for a honeycomb lattice, thereby hosting Dirac cones. Furthermore, each Dirac cone could be split by introducing periodic perturbations representing overlayer-substrate interactions. These unusual electronic structures were confirmed by angle-resolved photoemission spectroscopy and validated by first-principles calculations. Our results suggest monolayer boron as a new platform for realizing novel high-speed low-dissipation devices., Comment: accepted for publication in Physical Review Letters

Two-dimensional (2D) electrides are a new concept material in which anionic electrons are confined in the interlayer space between positively charged layers. We have performed angle-resolved photoemission spectroscopy measurements on Y$_2$C, which is a possible 2D electride, in order to verify the formation of 2D electride states in Y$_2$C. We clearly observe the existence of semimetallic "electride bands" near the Fermi level, as predicted by ${ab}$ ${initio}$ calculations, conclusively demonstrating that Y$_2$C is a quasi-2D electride with electride bands derived from interlayer anionic electrons., Comment: 5 pages, 4 figures

A synergistic effect between strong electron correlation and spin-orbit interaction (SOI) has been theoretically predicted to result in a new topological state of quantum matter on Kondo insulators (KIs), so-called topological Kondo insulators (TKIs). One TKI candidate has been experimentally observed on the KI SmB6(001), and the origin of the surface states (SS) and the topological order of SmB6 has been actively discussed. Here, we show a metallic SS on the clean surface of another TKI candidate YbB12(001), using angle-resolved photoelectron spectroscopy. The SS showed temperature-dependent reconstruction corresponding with the Kondo effect observed for bulk states. Despite the low-temperature insulating bulk, the reconstructed SS with c-f hybridization was metallic, forming a closed Fermi contour surrounding $\bar{\Gamma}$ on the surface Brillouin zone and agreeing with the theoretically expected behavior for SS on TKIs. These results demonstrate the temperature-dependent holistic reconstruction of two-dimensional states localized on KIs surface driven by the Kondo effect., Comment: 15 pages, 4 figures