Search

Highlights A clear negative correlation between the size of water clusters and the concentration of dissolved oxygen was observed. This implied that smaller clusters water exhibits higher concentrations of dissolved oxygen. Oxygen molecules are primarily existed at the surfaces or interfaces of water clusters and can rapidly traverse the gas liquid interface. A semi empirical formula relating the average number of water molecules in a cluster to 17O NMR half peak width was derived, demonstrating an approximate lin ear relationship.

ObjectiveTaste is one of the vital indicators for the quality evaluation of Coptis rhizome (CR), but the traditional taste evaluation lacks objectivity. By establishing the correlation between CR’s tastes and alkaloids, an objective basis for the taste evaluation was established.MethodsUltra-high performance liquid chromatography tandem triple quadrupole mass spectrometry (UHPLC-QQQ-MS/MS) and electronic tongue technique were performed to determine ten alkaloid contents and eight tastes from Coptis chinensis rhizome, Coptis deltoidea rhizome, Coptis teeta rhizome, and Coptis japonica rhizome, respectively. Combined with multivariate statistical analysis, we established models to discriminate the alkaloid contents and tastes of CR, screened the differential alkaloids and tastes, and performed Pearson’s correlation analysis on the results of alkaloids and tastes.Results1) According to the previous UHPLC-QQQ-MS/MS method established by our research group, the contents of ten alkaloids of the four species of CR were quantified, of which jatrorrhizine, columbamine, and magnoflorine were the differential alkaloids of the four species. 2) The electronic tongue technique realized the objectification of CR’s tastes and distinguished the species of CR based on the tastes of aftertaste-A, sourness, bitterness, and richness. 3) Pearson’s correlation analysis shows the bitterness of CR was mainly manifested as aftertaste-B, indicating the higher the aftertaste-B value, the higher the berberrubine content. Astringency and aftertaste-A could be suggested as quality evaluation indexes of CR, due to the positively correlated or significantly positively correlated with coptisine, epiberberine, berberine, and palmatine, respectively.ConclusionElectronic tongue technique has successfully achieved the objectification of the tastes of CR, and combined with UHPLC-QQQ-MS/MS technique for alkaloid quantification and correlation research, it provides a new idea for the quality evaluation of CR.

Amino acids are an essential source of human protein, and their content and composition are the main factors determining food protein utilization rate. Determining amino acids is essential in the component analysis of food. Therefore, a groundbreaking technique was developed utilizing ultra-high performance liquid chromatography interfaced with a triple quadrupole mass spectrometer (UHPLC-QQQ-MS/MS) for concurrently quantifying 18 amino acids across various types of meat. According to the test results, it can be known that the average content of glutamate (2.03 × 104 ± 3.94 × 103 μg/g in pig feet) was the highest in all meat samples, and the content of aspartate (0.0945 ± 0.0950 μg/g in pork) was the lowest, which was not detected in some samples such as beef and lean meat. Orthogonal partial least-squares discrimination analysis (OPLS-DA) showed: (1) 13 amino acids (arginine, valine, serine, alanine, lysine, glycine, asparagine, methionine, proline, threonine, glutamate, phenylalanine, and leucine, VIP > 1) were used as characteristic amino acids between pork and pig feet; (2) serine, threonine, alanine, histidine, asparagine, and arginine (VIP > 1) were used as signature amino acids in different components of pork (lean meat, fat, and pigskin); (3) asparagine, glutamate, histidine, tyrosine, and valine (VIP > 1) were considered as signature amino acids in different types of meats (pork, mutton, beef, and chicken). This study provides a new UHPLC-QQQ-MS/MS method for the determination of amino acid content in meat and also provides data support for the comprehensive evaluation of the nutritional value of foods containing amino acids.

PurposeInflammation is integral to the pathogenesis of intervertebral disc degeneration, yet the role of systemic inflammatory markers in this process remains underexplored. This study aims to explore the association between the Neutrophil-to-Lymphocyte Ratio (NLR) and the severity of disc degeneration.Patients and methodsA retrospective analysis was conducted on 375 patients diagnosed with lumbar disc degeneration between April 2018 and May 2021. All patients underwent a complete blood cell count examination. We applied the Pfirrmann grading system for cumulative disc grading, stratifying patients into two groups: a high-score group (cumulative grade > 17) and a low-score group (cumulative grade ≤ 17), based on the median cumulative grade. The association between the NLR and and the severity of disc degeneration was further analyzed using correlation analysis and logistic regression models. Furthermore, the predictive capacity of the NLR for lumbar disc degeneration was assessed using the Receiver Operating Characteristic (ROC) curve.ResultsWe found a significant positive correlation between high NLR levels and severe disc degeneration. The high-score group exhibited a significantly higher NLR compared to the low-score group [2.63 (1.91–4.18) vs. 2.04 (1.38–2.74), respectively, p < 0.001]. Significant correlations were found between NLR and patient characteristics (including age, BMI, VAS, NSAIDs usage, hemoglobin) and the cumulative grading. Logistic regression analysis identified age and NLR as independent predictors of the severity of disc degeneration. The ROC curve analysis demonstrated a good predictive capability of NLR for lumbar disc degeneration.ConclusionNLR could serve as a promising biomarker for assessing the severity of lumbar disc degeneration and offer potential benefits in both early diagnosis and treatment strategies.

In this study, a microcosm experiment was conducted to investigate the effects of Na2S2O8 preoxidation combined with biostimulation on petroleum-contaminated soil remediation. The response of microbial community during this process was explored using BIOLOG ECO microplate carbon utilization method and 16 s rDNA high-throughput sequencing. The results showed that use of 10 mg/g Na2S2O8 removed 19.8 % of the petroleum hydrocarbons, reduced soil biotoxicity and did not affect soil microbial activity compared to other concentrations. Therefore, sodium persulfate of ca. 10 mg/g was used to oxidize petroleum in soil before the biostimulation experiment with organic and inorganic fertilizers. Our finding showed that the content of total petroleum hydrocarbons (TPHs) in soil was reduced by 43.3 % in inorganic fertilizer treatment after 60 days. The results of BIOLOG ECO microplate carbon utilization analysis and 16 S rDNA high-throughput sequencing further confirmed that biostimulation quickly restored the microbial activities in oxidant treated soil. The main marker bacteria in chemical oxidation combined with biostimulation remediation were Arthrobacter and Paenarthrobacter, and their relative abundances were both significantly negatively correlated with the content of petroleum hydrocarbons in soil.

Abstract Background One goal of Anterior Cervical Discectomy and Fusion (ACDF) is to restore the loss of intervertebral disc height (IDH) results from the degenerative process. However, the effects of IDH on postoperative dysphagia after ACDF remain unclear. Methods Based on the results of a one-year telephone follow-up, A total of 217 consecutive patients after single-level ACDF were enrolled. They were divided into dysphagia and non-dysphagia groups. The age, BMI, operation time and blood loss of all patients were collected from the medical record system and compared between patients with and without dysphagia. Radiologically, IDH, spinous process distance (SP) of the operated segment, and C2-7 angle (C2-7 A) were measured preoperatively and postoperatively. The relationship between changes in these radiological parameters and the development of dysphagia was analyzed. Results Sixty-three (29%) cases exhibited postoperative dysphagia. The mean changes in IDH, SP, and C2-7 A were 2.84 mm, -1.54 mm, and 4.82 degrees, respectively. Changes in IDH (P = 0.001) and changes in C2-7 A (P = 0.000) showed significant differences between dysphagia and non-dysphagia patients. Increased IDH and increased C2-7 A (P = 0.037 and 0.003, respectively) significantly and independently influenced the incidence of postoperative dysphagia. When the change in IDH was ≥ 3 mm, the chance of developing postoperative dysphagia for this patient was significantly greater. No significant relationship was observed between the change in spinous process distance (SP) and the incidence of dysphagia. The age, BMI, operation time and blood loss did not significantly influence the incidence of postoperative dysphagia. Conclusion The change in IDH could be regarded as a predictive factor for postoperative dysphagia after single-level ACDF.

Abstract Background Ossification of ligamentum flavum (OLF) is a prevalent degenerative spinal disease, typically causing severe neurological dysfunction. Kruppel-like factor 5 (KLF5) plays an essential role in the regulation of skeletal development. However, the mechanism KLF5 plays in OLF remains unclear, necessitating further investigative studies. Methods qRT-PCR, immunofluorescent staining and western blot were used to measure the expression of KLF5. Alkaline Phosphatase (ALP) staining, Alizarin red staining (ARS), and the expression of Runt-related transcription factor 2 (RUNX2), osteopontin (OPN), and osteocalcin (OCN) were used to evaluate the osteogenic differentiation. Luciferase activity assay and ChIP-PCR were performed to investigate the molecular mechanisms. Results KLF5 was significantly upregulated in OLF fibroblasts in contrast to normal ligamentum flavum (LF) fibroblasts. Silencing KLF5 diminished osteogenic markers and mineralized nodules, while its overexpression had the opposite effect, confirming KLF5’s role in promoting ossification. Moreover, KLF5 promotes the ossification of LF by activating the transcription of Connexin 43 (CX43), and overexpressing CX43 could reverse the suppressive impact of KLF5 knockdown on OLF fibroblasts’ osteogenesis. Conclusion KLF5 promotes the OLF by transcriptionally activating CX43. This finding contributes significantly to our understanding of OLF and may provide new therapeutic targets.

Nickel–titanium (NiTi) alloy is a widely utilized medical shape memory alloy (SMA) known for its excellent shape memory effect and superelasticity. Here, laser powder bed fusion (LPBF) technology was employed to fabricate a porous NiTi alloy scaffold featuring a topologically optimized dominant cellular structure that demonstrates favorable physical and superior biological properties. Utilizing a porous structure topology optimization method informed by the stress state of human bones, two types of cellular structures—compression and torsion—were designed, and porous scaffolds were produced via LPBF. The physical properties of the porous NiTi alloy scaffolds were evaluated to confirm their biocompatibility, while their osteogenic efficacy was investigated through both in vivo and in vitro experiments, with comparisons made against a traditional octahedral unit cell structure. NiTi alloy porous scaffolds can be nearly net-shaped via LPBF and exhibit favorable physical properties, including a low elastic modulus, high hydrophilicity, a specific linear expansion rate, as well as superelastic and shape memory effects. These scaffolds demonstrate excellent biocompatibility, support in vitro osteogenesis, and possess significant in vivo bone ingrowth capabilities. When compared to titanium alloys, NiTi alloys show comparable osteogenic properties in vitro but superior bone ingrowth properties in vivo. Additionally, among octahedral-type, torsion-type, and topologically optimized compression-type porous scaffolds, the latter demonstrates enhanced bone ingrowth properties. LPBF technology is effective for manufacturing porous NiTi alloy scaffolds with fine pore structures and excellent mechanical properties. The scaffolds based on topologically optimized dominant cellular structures facilitate satisfactory and efficient bone formation.

BackgroundAll available methods for reconstruction after proximal humerus tumor resection have disadvantages, and the optimal reconstruction method remains uncertain. This study aimed to design a novel 3D-printed glenohumeral fusion prosthesis and verify its feasibility and safety using biomechanical methods.MethodsWe verified the feasibility and safety of the 3D-printed glenohumeral fusion prosthesis by finite element analysis and biomechanical experimentation. In the finite element analysis, three reconstruction methods were used, and displacement and von Mises stress were observed; on this basis, in the biomechanical experiment, models constructed with sawbones were classified into two groups. The force‒displacement curve of the 3D-printed prosthesis was evaluated.ResultsIn terms of displacement, the finite element analysis showed greater overall stability for the novel prosthesis than traditional glenohumeral joint arthrodesis. There was no obvious stress concentration in the internal part of the 3D-printed glenohumeral fusion prosthesis; the stable structure bore most of the stress, and the force was well distributed. Adding lateral plate fixation improved the stability and mechanical properties of the prosthesis. Furthermore, the biomechanical results showed that without lateral plate fixation, the total displacement of the prosthesis doubled; adding lateral plate fixation could reduce and disperse strain on the glenoid.ConclusionThe design of the 3D-printed glenohumeral fusion prosthesis was rational, and its stability and mechanical properties were better than those of traditional glenohumeral joint arthrodesis. Biomechanical verification demonstrated the feasibility and safety of this prosthesis, indicating its potential for proximal humerus bone defect reconstruction after tumor resection.

The reasonable setting of TBM disc cutter penetration depth is crucial for its rock-breaking efficiency in extremely hard rock geology. In the construction section of the Dujiangyan to Mount Siguniang Zijing Tunnel project, which encountered extremely hard diorite rock (with uniaxial compressive strength exceeding 230 MPa), to reveal the influence of penetration depth on disc cutter cutting of extremely hard diorite rock, the following steps were taken: Firstly, using a self-developed small-scale disc cutter linear rock-breaking test platform, experiments were conducted for four penetration depths: 1.5, 2.0, 2.5, and 3.0 mm, under fixed cutter spacing and with/without confinement conditions. Secondly, employing a high-precision crystalline rock material modeling method based on three-dimensional particle clusters, a full-scale numerical model of disc cutter linear cutting of diorite rock was established. Seven penetration depths ranging from 1.0 to 10.0 mm were tested under a fixed cutter spacing of 80 mm. Results indicate that under lateral confinement, diorite failure shifts from slip and extrusion to crushing, while under no confinement, it primarily spalls laterally with increased rock debris and ejection distance as penetration increases. Disc cutter normal force rises with penetration, with a critical 4mm point after which load increases slowly but penetration significantly, marking an efficient rock breaking stage. Specific energy efficiency peaks at 3mm penetration in tests and 4mm in simulations, attributed to test bench limitations. Combined results suggest an optimal penetration of 4mm.

A neuromorphic computing network based on SiCx memristor paves the way for a next-generation brain-like chip in the AI era. Up to date, the SiCx–based memristor devices are faced with the challenge of obtaining flexibility and uniformity, which can push forward the application of memristors in flexible electronics. For the first time, we report that a flexible artificial synaptic device based on a Ag NPs:a–SiC0.11:H memristor can be constructed by utilizing aluminum foil as the substrate. The device exhibits stable bipolar resistive switching characteristic even after bending 1000 times, displaying excellent flexibility and uniformity. Furthermore, an on/off ratio of approximately 107 can be obtained. It is found that the incorporation of silver nanoparticles significantly enhances the device’s set and reset voltage uniformity by 76.2% and 69.7%, respectively, which is attributed to the contribution of the Ag nanoparticles. The local electric field of Ag nanoparticles can direct the formation and rupture of conductive filaments. The fitting results of I–V curves show that the carrier transport mechanism agrees with Poole–Frenkel (P–F) model in the high-resistance state, while the carrier transport follows Ohm’s law in the low-resistance state. Based on the multilevel storage characteristics of the Al/Ag NPs:a–SiC0.11:H/Al foil resistive switching device, we successfully observed the biological synaptic characteristics, including the long–term potentiation (LTP), long–term depression (LTD), and spike–timing–dependent plasticity (STDP). The flexible artificial Ag NPs:a–SiC0.11:H/Al foil synapse possesses excellent conductance modulation capabilities and visual learning function, demonstrating the promise of application in flexible electronics technology for high-efficiency neuromorphic computing in the AI period.

The surface symmetry of the substrate plays an important role in the epitaxial high-quality growth of 2D materials; however, in-depth and in situ studies on these materials during growth are still limited due to the lack of effective in situ monitoring approaches. In this work, taking the growth of MoSe2 as an example, the distinct growth processes on Al2O3 (112¯0) and Al2O3 (0001) are revealed by parallel monitoring using in situ reflectance anisotropy spectroscopy (RAS) and differential reflectance spectroscopy (DRS), respectively, highlighting the dominant role of the surface symmetry. In our previous study, we found that the RAS signal of MoSe2 grown on Al2O3 (112¯0) initially increased and decreased ultimately to the magnitude of bare Al2O3 (112¯0) when the first layer of MoSe2 was fully merged, which is herein verified by the complementary DRS measurement that is directly related to the film coverage. Consequently, the changing rate of reflectance anisotropy (RA) intensity at 2.5 eV is well matched with the dynamic changes in differential reflectance (DR) intensity. Moreover, the surface-dominated uniform orientation of MoSe2 islands at various stages determined by RAS was further investigated by low-energy electron diffraction (LEED) and atomic force microscopy (AFM). By contrast, the RAS signal of MoSe2 grown on Al2O3 (0001) remains at zero during the whole growth, implying that the discontinuous MoSe2 islands have no preferential orientations. This work demonstrates that the combination of in situ RAS and DRS can provide valuable insights into the growth of unidirectional aligned islands and help optimize the fabrication process for single-crystal transition metal dichalcogenide (TMDC) monolayers.

Abstract Objective and background The deficiency of ectonucleotide pyrophosphatase/phosphodiesterase 1 (Enpp1) causes the phenotype similar to knee osteoarthritis (OA). However, the molecular mechanism is poorly understood. Method The global deletion of Enpp1 (Enpp1−/−) mice was created to analyze the role of Enpp1 in the progress of knee OA. The apoptosis, proliferation and chondrogenic differentiation ability of chondrocytes from wild-type (WT) and Enpp1−/− joints were compared. According to the results of high-throughput quantitative molecular measurements, the proteins of chondrocytes from WT and Enpp1−/− mice were used to explore the mechanism of Enpp1 deficiency-associated knee OA. Result In Enpp1−/− knee joints, we found significant chondrocyte apoptosis and proteomic results showed that abnormal expression of AMP-activated protein kinase (AMPK) signaling pathway may contribute to this phenotype. In primary chondrocyte cultures in vitro, Enpp1 deletion dramatically enhancing chondrocyte apoptosis. Meanwhile, we found Enpp1 deletion inhibits the phosphorylation of AMPK (P-AMPK). We also found that decreased level of P-AMPK and chondrocyte apoptosis, which are caused by Enpp1 deficiency, can be reversed by Acadesine (AICAR), the activator of AMPK. Conclusion Consequently, Enpp1 deficiency plays an essential role in knee OA by regulating AMPK signaling pathway.

Abstract Background Upregulation of an RNA-binding protein HuR has been implicated in glomerular diseases. Herein, we evaluated whether it is involved in renal tubular fibrosis. Methods HuR was firstly examined in human kidney biopsy tissue with tubular disease. Second, its expression and the effect of HuR inhibition with KH3 on tubular injury were further assessed in a mouse model induced by a unilateral renal ischemia/reperfusion (IR). KH3 (50 mg kg−1) was given daily via intraperitoneal injection from day 3 to 14 after IR. Last, one of HuR-targeted pathways was examined in cultured proximal tubular cells. Results HuR significantly increases at the site of tubular injury both in progressive CKD in patients and in IR-injured kidneys in mice, accompanied by upregulation of HuR targets that are involved in inflammation, profibrotic cytokines, oxidative stress, proliferation, apoptosis, tubular EMT process, matrix remodeling and fibrosis in renal tubulointerstitial fibrosis. KH3 treatment reduces the IR-induced tubular injury and fibrosis, accompanied by the remarkable amelioration in those involved pathways. A panel of mRNA array further revealed that 519 molecules in mouse kidney following IR injury changed their expression and 71.3% of them that are involved in 50 profibrotic pathways, were ameliorated when treated with KH3. In vitro, TGFβ1 induced tubular HuR cytoplasmic translocation and subsequent tubular EMT, which were abrogated by KH3 administration in cultured HK-2 cells. Conclusions These results suggest that excessive upregulation of HuR contributes to renal tubulointerstitial fibrosis by dysregulating genes involved in multiple profibrotic pathways and activating the TGFß1/HuR feedback circuit in tubular cells. Inhibition of HuR may have therapeutic potential for renal tubular fibrosis.

IntroductionTransmembrane 9 superfamily (TM9SF) proteins play significant roles in plant physiology. However, these proteins are poorly characterized in wheat (Triticum aestivum). The present study aimed at the genome-wide analysis of putative wheat TM9SF (TraesTM9SF) proteins and their potential involvement in response to nitrogen limitation and Bacillus amyloliquefaciens PDR1 treatments.MethodsTraesTM9SF genes were retrieved from the wheat genome, and their physiochemical properties, alignment, phylogenetic, motif structure, cis-regulatory element, synteny, protein-protein interaction (PPI), and transcription factor (TF) prediction analyses were performed. Transcriptome sequencing and quantitative real-time polymerase reaction (qRT-PCR) were performed to detect gene expression in roots under single or combined treatments with nitrogen limitation and B. amyloliquefaciens PDR1.Results and discussionForty-seven TraesTM9SF genes were identified in the wheat genome, highlighting the significance of these genes in wheat. TraesTM9SF genes were absent on some wheat chromosomes and were unevenly distributed on the other chromosomes, indicating that potential regulatory functions and evolutionary events may have shaped the TraesTM9SF gene family. Fifty-four cis-regulatory elements, including light-response, hormone response, biotic/abiotic stress, and development cis-regulatory elements, were present in the TraesTM9SF promoter regions. No duplication of TraesTM9SF genes in the wheat genome was recorded, and 177 TFs were predicted to target the 47 TraesTM9SF genes in a complex regulatory network. These findings offer valued data for predicting the putative functions of uncharacterized TM9SF genes. Moreover, transcriptome analysis and validation by qRT-PCR indicated that the TraesTM9SF genes are expressed in the root system of wheat and are potentially involved in the response of this plant to single or combined treatments with nitrogen limitation and B. amyloliquefaciens PDR1, suggesting their functional roles in plant growth, development, and stress responses.ConclusionThese findings may be vital in further investigation of the function and biological applications of TM9SF genes in wheat.

Abstract Background Intramedullary spinal cord metastasis (ISCM) of malignant tumors rarely happens. To the best of our knowledge, only five cases of ISCM from esophageal cancer have been reported in literature. We here report the sixth descripted case of ISCM from esophageal cancer. Case presentation A 68-year-old male presented with weakness of right limbs and localized neck pain two years after diagnosed esophageal squamous cell carcinoma. The gadolinium enhanced Magnetic resonance imaging (MRI) of cervical spine showed a mixed-intense intramedullary tumor with typical more intense thin rim of peripheral enhancement in C4-C5. The patient died fifteen days after diagnosis of irreversible respiratory and circulatory failures. An autopsy was refused by his family. Conclusions This case highlights the importance of gadolinium enhanced MRI for diagnosis in ISCM. We believe that early diagnosis and surgery for selected patients shows helpfulness to save their neurologic function and improve quality of life.

In the vertical take-off and landing (VTOL) state of tiltrotor aircraft, the inlet entrance encounters the incoming airflow at a 90° attack angle, resulting in highly complex internal flow characteristics that are extremely susceptible to gusts. Meanwhile, the flow quality at the inlet exit directly affects the performance of the aircraft’s engine. This work made use of an unsteady numerical simulation method based on sliding meshes to investigate the internal flow characteristics of the inlet during the hover state of a typical tiltrotor aircraft and the effects of head-on gusts on the inlet’s aerodynamic characteristics. The results show that during the hover state, the tiltrotor aircraft inlet features three pairs of transverse vortices and one streamwise vortex at the aerodynamic interface plane (AIP). The transverse vortices generated due to the rotational motion of the air have the largest scale and exert the strongest influence on the inlet’s performance, which is characterized by pronounced unsteady features. Additionally, strong unsteady characteristics are present within the inlet. Head-on gusts mainly affect the mechanical energy and non-uniformity of the air sucked into the inlet by influencing the direction of the rotor’s induced slipstream, thereby impacting the performance of the inlet. The larger head-on gusts have beneficial effects on the performance of the inlet. When the gust velocity reaches 12 m/s, there is a 1.01% increase in the total pressure recovery (σ) of the inlet, a 25.72% decrease in the circumferential distortion index (DC60), and a reduction of 62.84% in the area where the swirl angle |α| exceeds 15°. Conversely, when the gust velocity of head-on gusts reaches 12 m/s in the opposite direction, the inlet’s total pressure recovery decreases by 1.13%, the circumferential distortion index increases by 14.57%, and the area where the swirl angle exceeds 15° increases by 69.59%, adversely affecting the performance of the inlet. Additionally, the presence of gusts alters the unsteady characteristics within the inlet.

To rapidly evaluate the quality of complex herbal preparations, a new strategy was proposed based on multi-color scale and efficacy-oriented high-performance thin-layer chromatography (HPTLC) characteristic fingerprint combined with chemometric method. Firstly, effective components were screened through high-performance liquid chromatography with ultraviolet detection and evaporative light-scattering (HPLC-UV-ELSD), using multi-wavelength fusion combined with network pharmacology and molecular docking techniques. Subsequently, guided by the effective components, the targeted HPTLC characteristic fingerprint was established by multi-color scale scanning. Finally, combined with the chemometric method, the consistency of the preparation quality was evaluated, the marker components leading to quality differences were screened, and the quality control limit was established. Sanwujiao Pills (SWJPs) is a herbal preparation composed of six herbs for treating rheumatoid arthritis (RA). Through this strategy, four HPTLC characteristic fingerprints were established, they were derived from five herbs and guided by eight effective components in SWJPs. Through similarity, clustering heatmap, principal component analysis (PCA), and orthogonal partial least squares discriminant analysis (OPLS-DA), the quality distinctions among the 12 batches of SWJPs were determined. These batches were categorized into two groups based on their production time, and eight components affecting the quality of the preparation were identified. Meanwhile, the quality control threshold for SWJPs was determined based on Hotelling's T2 and DModX methods. This strategy aims to rapidly evaluate the quality of complex herbal preparations by HPTLC and extends the application of HPTLC fingerprint chromatography for identifying herbal medicine species and activity-related quality detection. The proposed strategy is also helpful for the quality control of other complex herbal preparations.

Due to the complexity and changeable of lithium-ion batteries, we propose a multi-variable and multi-step Temporal neural network to cover this task. Specially, a novel multi-step training strategy is applied to deal with long time sequences, and multi-variables is added to supervise the prediction. In addition, the Seq2seq net with long short term memory (LSTM) modules is employed to improve the prediction accuracy in various lithium-ion battery operating environments of −10 °C, 10 °C, 25 °C and 40 °C. The A123 lithium-ion batteries’ database collected by University of Maryland for the real scenarios has been used in the training process. The ablation studies indicate that the multi-step module is necessary under the root mean square error, mean absolute error and mean absolute percentage error index. The prediction error of comparison experiment under our proposed algorithms is 0.45 %@ root mean square error (RMSE), 0.30 %@ mean absolute error (MAE) and 1.11 %@ mean absolute percentage error (MAPE) at 10 °C. Our study introduces a novel and accurate SOC prediction method, which can provide accurate SOC estimates in a wide range of scenarios, emphasizing its novelty and relevance in addressing real-world challenges.

Abstract Scene text recognition (STR) has been widely applied in industrial and commercial fields. However, existing methods still face challenges when processing text images with defects such as low contrast, blur, low resolution, and insufficient illumination. These defects are common in actual situations because of diverse text backgrounds in natural scenes and limitations in shooting conditions. To address these challenges, we propose a novel network for noise-robust scene text recognition (NRSTRNet), which comprehensively suppresses the noise in the three critical steps of STR. Specifically, in the text feature extraction stage, NRSTRNet enhances the text-related features through the channel and spatial dimensions and disregards some disturbances from the non-text area, reducing the noise and redundancy in the input image. In the context encoding stage, fine-grained feature coding is proposed to effectively reduce the influence of previous noisy temporal features on current temporal features while simultaneously reducing the impact of partial noise on the overall encoding by sharing contextual feature encoding parameters. In the decoding stage, a self-attention module is added to enhance the connections between different temporal features, thereby leveraging the global information to obtain noise-resistant features. Through these approaches, NRSTRNet can enhance the local semantic information while considering the global semantic information. Experimental results show that the proposed NRSTRNet can improve the ability to characterize text images, enhance stability under the influence of noise, and achieve superior accuracy in text recognition. As a result, our model outperforms SOTA STR models on irregular text recognition benchmarks by 2% on average, and it is exceptionally robust when applied to noisy images.

Context The antitumor effects of caudatin have been explored in multiple cancers, but the research on lung cancer has not been fully understood.Objective We explored the effects of caudatin on non-small cell lung cancer (NSCLC) in vitro and in vivo.Materials and methods In the in vitro experiments, 0, 25, 50 and 100 μM of caudatin were selected to examine the effects on stemness and glycolysis. Subcutaneous tumour xenografts were constructed by injecting the nude mice (BALB/C) with 5 × 106 H1299 cells. In the in vivo experiments, all nude mice were divided into the caudatin group (50 mg/kg/day, n = 5) and the sham group (equal amount of DMSO, n = 5).Results The IC50 of caudatin for H1299 and H520 cells was 44.68 μM and 69.37 μM, respectively. Compared with caudatin 0 μM group, cell apoptosis rate was increased about 10 times and cell stemness was decreased by 75–85% in caudatin 100 μM group. Glucose uptake (65–80% reduction), lactic acid production (75–80% reduction), ATP level (70–80% reduction) and the expression of HK2 and LDHA (75–85% reduction) were decreased in caudatin 100 μM group. The expression of Raf/MEK/ERK pathway related proteins was decreased to 20–25% by caudatin. Tumour weight (about 70% reduction) and the expression of stemness, glycolysis and Raf/MEK/ERK pathway related proteins (about 50–75% reduction) were suppressed by caudatin in vivo.Discussion and conclusions We revealed that caudatin blocked stemness and glycolysis in NSCLC for the first time. More experiments about exact dosage of caudatin in vivo should be conducted.

Abstract Background Apart from the current understanding of enzyme function, the mechanism of ectonucleotide pyrophosphatase/phosphodiesterase 1 (Enpp1) deficiency-associated osteoporosis is unknown. We aimed to explore the changes in the expression of signaling pathways of bone tissues involved in Enpp1 deficiency. Methods The body weights and morphology and histology of the bones of male Enpp1 knockout (KO) and wild-type (WT) mice were assessed. The humeri of WT and Enpp1 KO mice at 12 weeks of age were subjected to high-throughput quantitative molecular measurements, and bioinformatics analysis was performed. Proteins from humeri and calvarial pre-osteoblasts (Pobs) were used to verify the differentially expressed signaling pathways and to explain the mechanism of Enpp1 deficiency-associated osteoporosis. Results Enpp1 KO mice had significantly lower body weight and trabecular bone mass in the hindlimbs than WT mice. Proteomics and immunoblotting showed that Enpp1 deletion downregulated the expression of the p38 mitogen-activated protein kinase (MAPK) signaling pathway in bones. Lysophosphatidic acid (LPA) was involved in activating the MKK3/p38 MAPK/PCNA pathway and proliferating Pobs in Enpp1 KO mice, whereas a p38 MAPK inhibitor suppressed the LPA-induced pro-proliferation phenotype (p

Aim: To observe the efficacy of the low dose apatinib plus deep hyperthermia as third-line or later treatment for patients with human epidermal growth factor receptor 2 (HER-2) negative advanced gastric cancer.Methods: 80 eligible patients with HER-2 negative advanced gastric cancer admitted to Jingjiang People’s Hospital Affiliated with Yangzhou University-from March 2021 to March 2022 were selected, and they were divided into the control group (n = 40, apatinib) and experimental group (n = 40, apatinib plus deep hyperthermia) on the basis of random number table method. The levels of serum carcinoembryonic antigen (CEA), carbohydrate antigen 199 (CA199), and vascular endothelial growth factor (VEGF) were monitored, and the efficacy of the two groups was analyzed by referring to Karnofsky performance status (KPS), overall survival (OS) and disease control rate (DCR) before and after treatment.Results: The levels of CEA, CA199, and VEGF in both groups were lower after treatment than before (p < 0.05), and lower (CEA: 8.85 ± 1.36 vs. 12.87 ± 1.23, CA199: 34.19 ± 4.68 vs. 50.11 ± 5.73, VEGF: 124.8 ± 18.03 vs. 205.9 ± 19.91) in the experimental group than in the control group (p < 0.05). The DCR and KPS of the patients in the experimental group were significantly higher (DCR: 62.50% vs. 40.00%; KPS: 83.25 ± 1.15 vs. 76.25 ± 1.17) than in the control group (p < 0.05). In survival analysis, patients with control group had shorter OS than the experimental group. (median 5.65 vs. 6.50 months; hazard ratio [HR], 1.63 [95% confidence interval (CI) 1.02–2.60], p = 0.0396).Conclusion: The application of low-dose apatinib plus deep hyperthermia for patients with HER-2 negative gastric cancer who failed second-line treatment should be a promising option.

Squamous cell carcinomas are an aggressive cancer type which can occur in multiple organ systems. Here, the authors analyse the proteome of SCC cancers from 17 organs and show commonly dysregulated proteins independent of location.

Introduction: Congenital disorders of glycosylation (CDGs) are a genetically heterogeneous group of metabolic disorders caused by abnormal protein or lpid glycosylation. DPM2 is one subunit of a heterotrimeric complex for dolichol-phosphatemannose synthase (DPMS), a key enzyme in glycosylation, and only four patients with DPM2-CDG have been reported.Methods: Whole-exome sequencing (WES) was performed in a Chinese family having two siblings with a mild form of DPM2-CDG with developmental delay, mild intellectual disability, hypotonia, and increased serum creatine kinase. Sanger sequencing was used to validate the variants identified in the siblings and their parents. In vitro functional study was performed.Results: A homozygous mutation, c.197G>A (p.Gly66Glu) in exon 4 of DPM2 (NM_003863) was identified by whole exome sequencing (WES). In vitro functional analysis demonstrated that this variant increased the expression level of DPM2 protein and western blot revealed a significant decrease in ICAM1, a universal biomarker for hypoglycosylation in patients with CDG, suggesting abnormal N-linked glycosylation. We also reviewed the 4 previously reported patients carrying homozygous or compound heterozygous variants of DMP2 gene, and found that patients with variants within the region encoding the first domain had more severe clinical symptoms than those with variants within the second domain. However, the actual genotype-phenotype relationship needs more study.Discussion: Overall, our study broadens the variant spectrum of DPM2 gene, attempts to explain the different phenotypes in patients with different DPM2 variants, and emphasizes the need of further functional studies to understand the underlying pathophysiology of the phenotypic heterogeneity.

Abstract Background Minimally invasive separation surgery (MISS) is a safe and effective surgical technique, the current optimal treatment for spinal metastases. However, the learning curve for this technique has not been analyzed. This study aimed to define and analyze the surgical learning curve of MISS for the treatment of spinal metastases with small incision and freehand pedicle screw fixation. Methods A continuous series of 62 patients with spinal metastases who underwent MISS were included. Each patient's operative data were accurately counted. The improvement of the patients' neurological function was followed up after surgery to evaluate the surgical treatment effect. Logarithmic curve-fit regression was used to analyze the surgical learning curve of MISS. The number of cases needed to achieve proficiency was analyzed. Based on this cut-off point, this series of cases was divided into the early phase and later phase groups. The influence of the time sequence of MISS on surgical data and surgical efficacy was analyzed. Results The operative time decreased gradually with the number of surgical cases increasing and stabilized after the 20th patient. There was no statistical difference in demographic characteristics and preoperative characteristics between the two groups. The mean operative time in the later phase group was about 39 min shorter than that in the early phase group (mean 227.95 vs. 189.02 min, P = 0.027). However, it did not affect other operative data or the surgical treatment effect. Conclusion The learning curve of MISS for spinal metastases is not steep. With the increase of surgeons' experience, the operative time drops rapidly and stabilizes within a certain range. MISS can be safely and effectively performed at the beginning of a surgeon's caree.

Laser shock loading is a more promising technology for investigating spallation damage in materials under shock-wave loading. In this paper, shock-induced spallation in a 90W–Ni–Fe alloy at an ultrahigh tensile strain rate of 106 s−1 is investigated using a superintense ultrafast laser facility. The spallation of the 90W–Ni–Fe alloy was dominated by a transgranular fracture of tungsten(W) particles with a high spall strength of 6.46 GPa. Here, we found an interesting phenomenon that the formation of nanograins inside W particles leads to a new mode of transcrystalline fracture of W particles during the laser shock loading. Futhermore, most voids were nucleated inside the W particles rather than at the W/γ-(Ni, Fe) matrix-phase interface. This result contradicts the fracture theory under quasi-static loading, which posits that the W/γ-(Ni, Fe) matrix-phase interface is not the preferred site for the initial failure under shock loading.

Abstract Background CHEDDA syndrome is a rare neurodevelopmental syndrome caused by heterozygous missense or indel variants in the HX repeat motif of ATN1 gene. To date, CHEDDA has been identified in a few ethnic groups, and only 17 patients have been reported in literature, and no case has been reported in any country or region in Asia. Methods Trio‐exome sequencing (Trio‐ES) examination was conducted in a Chinese girl with global developmental delay and in her parents. Sanger sequencing was performed to confirm the candidate variant. Results This patient presented with mental and motor developmental delay, speech delay, and mild dysmorphic facial features, and had no epilepsy and visual impairment. Brain MRI did not show obvious structural abnormality. Through ES we identified a novel and de novo variant, c.3176_c.3177insGCACCT (p.Ser1059_His1060insHisLeu), within the HX motif of ATN1. No other pathogenic variant in another gene was found to support an alternative clinical and molecular diagnosis. Conclusions This is the first described case of CHEDDA from China. Together with the available literature data, we found that either disruption of HX motif or alteration of the HX repeat number would lead to ATN1‐associated CHEDDA. We also noted that CHEDDA is a clinical heterogenous syndrome, and patients carrying the same or similar variant might have different clinical manifestations and prognosis.

Solid state phase reactions are complicated and sometimes a black box because of the copious reactants and versatile pathways. In this work, the phase relationship in W-Fe-C ternary system is systematically studied by means of the symmetry principles in crystal chemistry and first-principles thermodynamics. According to group-subgroup relation, ternary carbides FexWxC (x = 6, 3, and 2) are likely to form via the intermediate W2C and FeW3C phases at C-rich condition. At C-poor condition, those ternary carbides are prone to be transformed from Fe7W6 with residual C element in the matrix or C from Fe3C in steel. Based on percolation theory, we find the direct phase transition from Fe6W6C to Fe3W3C undergoes with transient Fe2W2C. The calculated Gibbs reaction free energy is in good agreement with various experimental observation and clarifies the discrepancies and controversaries among different experiments in the literature. The success in predicting the phase relationship of W-Fe-C ternary system suggests that the symmetry principles in crystal chemistry combined with first-principles calculations not only unravel the intrinsic mechanism behind the phase reaction, but also should be incorporated into future designs of covalent materials, such as carbides, nitrides, and oxides.

To improve the low compactness and limited size of powder metallurgy (P/M) aluminum alloy materials, cold rolling deformation on P/M aluminum alloy was carried out in this work. And the microstructure and mechanical properties of P/M aluminum alloy during cold rolling were investigated from multi-dimensional and multi-scale perspectives. The results indicate that the microstructure gradually evolved from the original equiaxial structure to the fiber structure after cold rolling. Also, the grain size decreased with an increase in cumulative reductions. When the cumulative reduction was increased from 0 to 80%, the relative density and tensile strength of the samples increased from 98.31% to 221.94 MPa to 99.04% and 302.88 MPa, respectively. On this basis, the synergetic effect of microstructure densification and deformation strengthening of the P/M 2024 Al alloy during cold rolling was investigated. The improved mechanical properties mainly resulted from the combined effects of the increased microstructural compactness and deformation strengthening.

Improving the reliability of the solder joint has been the recent research focus in the electronic packaging field due to the increasing degree of integration in the electronic devices. During the reflow soldering process, when the local component is heterogeneous, the coarse structure of the solder joint is easy to grow, which deteriorates the performance of the solder joint. In this study, Au-20Sn/Au/Ni(P)/Kovar joints were prepared using ultrasonic-assisted reflow soldering process. Ultrasonication during reflow improved the wettability and shear strength between the Au-20Sn solder and Kovar substrate. The applied ultrasound can break the primary Au5Sn grain and refine the eutectic microstructure through acoustic cavitation. Meanwhile, ultrasound induced the formation of a new intermetallic compound (IMC) layer that was identified as Ni3P (ca 120 nm), which inhibited the diffusion of Ni from substrate into the solder matrix. The mechanical properties of Au-20Sn/Au/Ni(P)/Kovar joint treated with 80 W ultrasonic vibration (USV) increased by 46.94% as compared to the control sample. The current study provides a new strategy for high-performance packaging in electronic devices in extreme environments.

This paper proposed a novel low-pressure sintering process contraposing to characteristics of pre-alloyed aluminum powders and analyzed its feasibility. The low pressure was set to 0.1 MPa in this study. Meanwhile, 0 MPa and 10 MPa were set as control group. With gas-atomized 2024 aluminum powders as raw material, the microstructure and tensile properties of specimens sintered under three orders of magnitude of pressure (0 MPa, 0.1 MPa and 10 MPa) at two representative temperatures (525 °C and 575 °C) were compared. The results showed that it was difficult for pressureless sintering (0 MPa) to densify pre-alloyed aluminum powders, but low-pressure sintering could. As the liquid phase formed at supersolidus temperature was squeezed out, the loss of alloying elements such as Cu and Mg, which would play an important role in subsequent heat treatment, during low-pressure sintering was apparently less than that of 10 MPa. The density of aluminum sintered under 0.1 MPa at 575 °C was 2.732 g/cm3 and the ultimate tensile strength was 228.16 MPa with ductility of 12 %, which achieved a good balance of plasticity and strength. These findings will bring new insights to the industrialization of aluminum powder metallurgy (APM).

Background: The effect of calcium supplementation on bone mineral accretion in people under 35 years old is inconclusive. To comprehensively summarize the evidence for the effect of calcium supplementation on bone mineral accretion in young populations (≤35 years). Methods: This is a systematic review and meta-analysis. The Pubmed, Embase, ProQuest, CENTRAL, WHO Global Index Medicus, Clinical Trials.gov, WHO ICTRP, China National Knowledge Infrastructure (CNKI), and Wanfang Data databases were systematically searched from database inception to April 25, 2021. Randomized clinical trials assessing the effects of calcium supplementation on bone mineral density (BMD) or bone mineral content (BMC) in people under 35 years old. Results: This systematic review and meta-analysis identified 43 studies involving 7,382 subjects. Moderate certainty of evidence showed that calcium supplementation was associated with the accretion of BMD and BMC, especially on femoral neck (standardized mean difference [SMD] 0.627, 95% confidence interval [CI] 0.338–0.915; SMD 0.364, 95% CI 0.134–0.595; respectively) and total body (SMD 0.330, 95% CI 0.163–0.496; SMD 0.149, 95% CI 0.006–0.291), also with a slight improvement effect on lumbar spine BMC (SMD 0.163, 95% CI 0.008–0.317), no effects on total hip BMD and BMC and lumbar spine BMD were observed. Very interestingly, subgroup analyses suggested that the improvement of bone at femoral neck was more pronounced in the peripeak bone mass (PBM) population (20–35 years) than the pre-PBM population (

We analyze the reports and comments in newspapers on e-sports using T.A. van Dijk’s news discourse and discuss how Chinese newspapers present the configuration and the construction of e-sports. The method of reporting e-sports follows the viewpoints of cyber games. Such viewpoints regarding e-sports as cyber games in media-meditated communication are socially accepted. Through the presentation of these viewpoints, a model of the coverage of e-sports is constructed. E-sports have gained government support, and the media constructs an image of e-sports as an information technology industry because of their technological nature.

As a core component of an aero-engine, the aerodynamic performance of the nacelle is essential for the overall performance of an aircraft. However, the direct design of a three-dimensional (3D) nacelle is limited by the complex design space consisting of different cross-section profiles and irregular circumferential curves. The deep manifold learning-assisted geometric multiple dimensionality reduction method combines autoencoders (AE) with strong capabilities for non-linear data dimensionality reduction and class function/shape function transformation (CST). A novel geometric dimensionality reduction method is developed to address the typical constraints of nacelle parameterization. Low-dimensional latent variables are extracted from the high-dimensional design space to achieve a parametric representation of 3D nacelle manifolds. Compared with traditional parametric methods, the proposed geometric dimensionality reduction method improves the accuracy and efficiency of geometric reconstruction and aerodynamic evaluation. A multi-objective optimization framework is proposed based on deep manifold learning to increase the efficiency of 3D nacelle design. The Pareto front curves under drag divergence constraints reveal the correlation between the geometry distribution and the surface isentropic Mach number distribution of 3D nacelles. This paper demonstrates the feasibility of the proposed geometric dimensionality reduction method for direct multi-objective optimization of 3D nacelles.

Abstract Although chimeric antigen receptor (CAR)-engineered T cells have shown great success in the treatment of B cell malignancies, this strategy has limited efficacy in patients with solid tumors. In mouse CAR-T cells, IL-7 and CCL19 expression have been demonstrated to improve T cell infiltration and CAR-T cell survival in mouse tumors. Therefore, in the current study, we engineered human CAR-T cells to secrete human IL-7 and CCL19 (7 × 19) and found that these 7 × 19 CAR-T cells showed enhanced capacities of expansion and migration in vitro. Furthermore, 7 × 19 CAR-T cells showed superior tumor suppression ability compared to conventional CAR-T cells in xenografts of hepatocellular carcinoma (HCC) cell lines, primary HCC tissue samples and pancreatic carcinoma (PC) cell lines. We then initiated a phase 1 clinical trial in advanced HCC/PC/ovarian carcinoma (OC) patients with glypican-3 (GPC3) or mesothelin (MSLN) expression. In a patient with advanced HCC, anti-GPC3-7 × 19 CAR-T treatment resulted in complete tumor disappearance 30 days post intratumor injection. In a patient with advanced PC, anti-MSLN-7 × 19 CAR-T treatment resulted in almost complete tumor disappearance 240 days post-intravenous infusion. Our results demonstrated that the incorporation of 7 × 19 into CAR-T cells significantly enhanced the antitumor activity against human solid tumor. Trial registration: NCT03198546. Registered 26 June 2017, https://clinicaltrials.gov/ct2/show/NCT03198546?term=NCT03198546&draw=2&rank=1

Background: Krüppel like factor 10 (KLF10), which is also known as TGF-β Inducible Early Gene-1 (TIEG1), plays a crucial role in regulating cell proliferation, cell apoptosis and inflammatory reaction in human carcinoma cells. Moreover, KLF10 knockout in mice leads to severe defects associated with muscle, skeleton and heart etc. However, the function of KLF10 in intervertebral disc degeneration (IVDD) has not been reported yet. Methods: The relationship between KLF10 and IVDD were investigated in nucleus pulposus (NP) tissues from human and rats. The role of KLF10 in NP cells was explored via loss or gain of function experiments. IVDD rat models were constructed through needle puncture and the effects of KLF10 in IVDD model of rats were investigated via intradiscal injection of KLF10. Results: We first found that KLF10 was lowly expressed in degenerative NP tissues and the level of KLF10 showed negative correlation with the disc grades of IVDD patients. Loss or gain of function experiments demonstrated that KLF10 could inhibit apoptosis and enhance migration and proliferation of IL-1β induced NP cells. And KLF10 overexpression reduced extracellular matrix (ECM) degeneration and enhanced ECM synthesis, whereas knockdown of KLF10 resulted in adverse effects. These positive effects of KLF10 could be reversed by the inhibition of TGF-β signaling pathway. In vivo, KLF10 overexpression alleviated IVDD. Conclusions: This is the first study to reveal that KLF10 was dysregulated in IVDD and overexpressed KLF10 could alleviate IVDD by regulating TGF-β signaling pathway both in vitro and in vivo, which were involved in prohibiting apoptosis, promoting proliferation and migration of NP cells.The translational potential of this article: Overexpression of KLF10 might be an effective therapeutic strategy in the treatment of IVDD.

Abstract As a result of mutations in the upstream components of the Wnt/β-catenin signaling pathway, this cascade is abnormally activated in colon cancer. Hence, identifying the activation mechanism of this pathway is an urgent need for the treatment of colon cancer. Here, we found an increase in ADCK1 (AarF domain-containing kinase 1) expression in clinical specimens of colon cancer and animal models. Upregulation of ADCK1 expression promoted the colony formation and infiltration of cancer cells. Downregulation of ADCK1 expression inhibited the colony formation and infiltration of cancer cells, in vivo tumorigenesis, migration, and organoid formation. Molecular mechanistic studies demonstrated that ADCK1 interacted with TCF4 (T-cell factor 4) to activate the β-catenin/TCF signaling pathway. In conclusion, our research revealed the functions of ADCK1 in the development of colon cancer and provided potential therapeutic targets.

Visual object tracking is urgent yet challenging work since it requires the simultaneous and effective classification and estimation of a target. Thus, research on tracking has been attracting a considerable amount of attention despite the limitations of existing trackers owing to deformation, occlusion and motion. For most current tracking methods, researchers have proposed various ways to adopt a multi-scale search or anchors for estimation, but these methods always need prior knowledge and too many hyperparameters. To address these issues, we proposed a novel Siamese Attentional Cascade Keypoints Tracking Network named SiamACN to exactly track the object by using keypoints prediction instead of anchors. Compared to complex target prediction, the anchor-free method is performed to avoid plaguy hyperparameters, and a simplified hourglass network with global attention is considered the backbone to improve the tracking efficiency. Further, our framework uses keypoints prediction around the target with cascade corner pooling to simplify the model. To certificate the superiority of our framework, extensive tests are conducted on five tracking benchmarks, including OTB-2015, VOT-2016, VOT-2018, LaSOT and UAV123. Our method achieves the leading performance with an accuracy of 61.2% on VOT2016 and favorably runs at 32 FPS against other competing algorithms, which confirms its effectiveness in real-time applications.

With the continuous development of the earth observation technology, the spatial resolution of remote sensing images is also continuously improved. As one of the key problems in remote sensing images interpretation, the classification of high-resolution remote sensing images has been widely concerned by scholars at home and abroad. With the improvement of science and technology, deep learning has provided new ideas for the development of image classification, but it has not been widely used in remote sensing images processing. In the background of remote sensing huge data, the remote sensing images classification based on deep learning proposed in the study has more research significance and application value. The study proposes a high-resolution remote sensing images classification method based on an improved convolutional neural network. The traditional convolutional neural network framework is optimized and the initial structure is added. The actual classification results of radial basis functions and support vector machine are compared horizontally. The classification results of hyperspectral images were presented that the improved method can perform better in overall accuracy and Kappa coefficient. The commission errors of support vector machine classification method are more than 6 times of that of the improved convolutional neural network classification method and the overall accuracy of the improved convolutional neural network classification method has reached 97% above.

Single atom catalysts (SACs) are promising in electrocatalysis but challenging to characterize. Here, the authors apply a recently developed quantum mechanical grand canonical potential kinetics method to predict reaction mechanisms and rates for CO2 reduction at different sites of graphene-supported Ni-SACs.

Abstract Background The leptin receptor-deficient knockout (db/db) mouse is a well-established model for studying type II diabetes mellitus (T2DM). T2DM is an important risk factor of intervertebral disc degeneration (IVDD). Although the relationship between type I diabetes and IVDD has been reported by many studies, few studies have reported the effects of T2DM on IVDD in db/db mice model. Methods Mice were separated into 3 groups: wild-type (WT), db/db, and IGF-1 groups (leptin receptor-deficient mice were treated with insulin-like growth factor-1 (IGF-1). To observe the effects of T2DM and glucose-lowering treatment on IVDD, IGF-1 injection was used. The IVD phenotype was detected by H&E and safranin O fast green staining among db/db, WT and IGF-1 mice. The levels of blood glucose and weight in mice were also recorded. The changes in the mass of the trabecular bone in the fifth lumbar vertebra were documented by micro-computed tomography (micro-CT). Tunnel assays were used to detect cell apoptosis in each group. Results The weight of the mice were 27.68 ± 1.6 g in WT group, which was less than 57.56 ± 4.8 g in db/db group, and 52.17 ± 3.7 g in IGF-1 injected group (P

An end-to-end image dehazing method based on convolution neural network is presented to solve the problem in which Unmanned Aerial Vehicle (UAV) high-resolution remote sensing images have reduced image sharpness due to haze. First, the original atmospheric scattering model is adapted to get an end-to-end dehazing model. Then, several unknown parameters are unified into one parameter, and the unknown parameter is estimated by using a multiscale convolution neural network. Finally, the parameter estimates are incorporated into the dehazing model to get a haze-free image. For the no reference image dataset, we first train the network using existing datasets, and then the network is trained using a self-built dataset. In this article, the haze removal effect for different types of unmanned remote sensing images is tested and compared with those of the main dehazing algorithms. The experiments show that the algorithm in this article has different degrees of improvement regarding its visual effect and objective indicators.

Cardiac arrhythmias (CAs) are generally caused by disruption of the cardiac conduction system; interleukin-2 (IL-2) is a key player in the pathological process of CAs. This study aimed to investigate the molecular mechanism underlying the regulation of IL-2 and the sodium channel current of sodium voltage-gated channel beta subunit 3 (SCN3B) by miR-190a-5p in the progression of CAs. ELISA results suggested the concentration of peripheral blood serum IL-2 in patients with atrial fibrillation (AF) to be increased compared to that in normal controls; fluorescence in situ hybridization indicated that the expression of IL-2 in the cardiac tissues of patients with AF to be upregulated and that miR-190a-5p to be downregulated. Luciferase reporter assay, quantitative real-time-PCR, and whole-cell patch-clamp experiments confirmed the downregulation of IL-2 by miR-190a-5p and influence of the latter on the sodium current of SCN3B. Overall, miR-190a-5p suppressed the increase in SCN3B sodium current caused by endogenous IL-2, whereas miR-190a-5p inhibitor significantly reversed this effect. IL-2 was demonstrated to be directly regulated by miR-190a-5p. We, therefore, concluded that the miR-190a-5p/IL-2/SCN3B pathway could be involved in the pathogenesis of CAs and miR-190a-5p might acts as a potential protective factor in pathogenesis of CAs.

Abstract Background and Aims Both Charcot‐Marie‐Tooth disease type 2D (CMT2D) and distal spinal muscular atrophy type V (dSMA‐V) are GARS1 disease phenotypes involving axonal peripheral neuropathy. Patients often develop clinical symptoms in their teens. Herein, we reported a Chinese family with infantile‐onset CMT2D/dSMA‐V. Methods Clinical evaluation and laboratory examination were performed in our proband, the older sister from this family, and trio exome sequencing (ES) was conducted on the proband and her parents, followed by Sanger sequencing. Results A novel GARS1 mutation (c.997G>C, p.E333Q; NM_002047) was identified in this patient and her younger sister but not in her parents; thus, it is presumed that this mutation is inherited from a germline mosaic parent. The younger sister began to exhibit weakness of her hands and feet at the age of 1 year old. Conclusion This is the first report of infantile CMT2D/dSMA‐V in China. Our study increases the number of infantile‐onset cases, as well as reported pathogenic variants in the GARS1 gene, and highlights the important role of exome sequencing in the clinical diagnosis of disease and enabling subsequent prenatal diagnosis. Our study reminds us to consider the possibility of parent germline mosaicism in the subsequent prenatal genetic diagnosis when identifying a de novo variant.

Abstract Background Wiedemann–Steiner syndrome (WSS) is an autosomal dominant disorder characterized by short stature, hypertrichosis, intellectual disability, developmental delay, along with facial dysmorphism. WSS patients exhibit great phenotypic heterogeneities. Some variants in KMT2A (MLL) gene have been identified as the cause of WSS. Methods Whole exome sequencing on the probands followed by Sanger sequencing validations in the family were applied to determine genetic variants. In silico analyses were used for predicting potential effects of the variants. Results We identified three novel de novo heterozygous variants: c.883A>T (p.Lys295*), c.4171C>T (p.Gln1391*), and c.3499T>C (p.Cys1167Arg), in KMT2A gene from three unrelated Chinese WSS patients. According to the American College of Medical Genetics and Genomics (ACMG) guidelines, these three variants were classified as pathogenic, pathogenic and likely pathogenic variant, respectively. By reviewing all the available cases with same mutated KMT2A regions as the three patients had, we found that in addition to the representative symptoms, our patients exhibited some sporadically observed symptoms, such as severe ophthalmological symptoms, endocardial fibroelastosis, cytomegalovirus infection, and feet eversion. We also revealed that variants in different KMT2A regions contribute to the phenotypic heterogeneity of WSS, highlighting challenges in the diagnosis of syndromic disorders spanning a broad phenotypic spectrum. Conclusion Our study would aid in further broadening our knowledge about the genotype–phenotype correlation of WSS.

B cell expansion with NF-κB and T cell anergy (BENTA) is a rare primary immunodeficiency disorder caused by gain-of-function (GOF) mutations in the CARD11 gene. Affected patients present with persistent B cell lymphocytosis in early childhood paired with lymphadenopathy and splenomegaly. Until now only six activating mutations from 14 patients have been reported in CARD11. Here we report a patient from China with polyclonal B cell lymphocytosis and frequent infections in early life. A heterozygous mutation (c.377G>A, G126D) in exon 5 of CARD11 gene (NM_032415) was identified by whole exome sequencing. In vitro functional studies showed that the G126D mutation is associated with increased expression of CARD11 and NF-κB activation in Hela cells. Flow cytometry analysis indicated NK cell activity and CD107a degranulation of the patient were decreased. RNA sequencing analysis showed that a number of genes in NF-κB pathway increased while those involved in NK cell activity and degranulation were down-regulated. In summary, our work identified a de novo germline GOF mutation in CARD11 with functional evidence of BENTA.

Abstract Background Congenital disorders of glycosylation (CDG) are a genetically heterogeneous group of disorders caused by defects in the synthesis and processing of glycoproteins. COG6‐CDG is a kind of disorder caused by conserved oligomeric golgi complex 6 (COG6) deficiency. To date, only 19 patients with COG6‐CDG have been reported. Methods We report a girl in a Chinese family with developmental delay, growth retardation, microcephaly, abnormal liver function, and hypohidrosis. Trio whole‐exome sequencing was performed for this patient and her parents, and the variants identified were validated by Sanger sequencing. Prenatal diagnosis was done for this family during a subsequent pregnancy. The literature review on these patients was performed by reviewing articles published in English and Chinese. Results Genetic sequencing identified two novel heterozygous mutations: c.428G>T (p.S143I) and c.1843C>T (p.Q615X) in the COG6 gene, inherited from her healthy parents, respectively. A total of 11 different mutations in COG6 have been reported previously, and mutations potentially affecting splicing are the most common. The main clinical features included development delay, facial dysmorphism, growth retardation, skin abnormalities (hypohidrosis), microcephaly, abnormal brain structure, liver involvement, and recurrent infections. Conclusion Our work broadens the mutation spectrum of COG6 gene and states the importance of whole‐exome sequencing in facilitating the definitive diagnosis of this disorder and prenatal diagnosis in a subsequent pregnancy.

In this article, we propose a new particle swarm optimization–based satellite selection algorithm for BeiDou Navigation Satellite System/Global Positioning System receiver, which aims to reduce the computational complexity of receivers under the multi-constellation Global Navigation Satellite System. The influences of the key parameters of the algorithm—such as the inertia weighting factor, acceleration coefficient, and population size—on the performance of the particle swarm optimization satellite selection algorithm are discussed herein. In addition, the algorithm is improved using the adaptive simulated annealing particle swarm optimization (ASAPSO) approach to prevent converging to a local minimum. The new approach takes advantage of the adaptive adjustment of the evolutionary parameters and particle velocity; thus, it improves the ability of the approach to escape local extrema. The theoretical derivations are discussed. The experiments are validated using 3-h real Global Navigation Satellite System observation data. The results show that in terms of the accuracy of the geometric dilution of precision error of the algorithm, the ASAPSO satellite selection algorithm is about 86% smaller than the greedy satellite selection algorithm, and about 80% is less than the geometric dilution of precision error of the particle swarm optimization satellite selection algorithm. In addition, the speed of selecting the minimum geometric dilution of precision value of satellites based on the ASAPSO algorithm is better than that of the traditional traversal algorithm and particle swarm optimization algorithm. Therefore, the proposed ASAPSO algorithm reduces the satellite selection time and improves the geometric dilution of precision using the selected satellite algorithm.

Adjacent segment disease (ASD) is one of the potential risks after lumbar spine surgery with instrumentation. Revision surgery needs to be performed on patients suffered from ASD. The traditional open surgery takes severe injury to the body. We investigated the clinical outcome of using full-endoscopic transforaminal procedure to treat the single-level adjacent segment diseases after posterior lumbar fusion. 33 patients (average 71 years, ranged 65–84 years old) underwent full-endoscopic transforaminal procedure were involved. The Oswestry Disability Index (ODI), Modified Japanese Orthopedic Association (mJOA) score and visual analogue scale (VAS) score were used to evaluate the clinical effect. The complication, hospital stay, hospitalization costs and blood loss were investigated according to the patient's records. The mean VAS score was 1.8 and mJOA score was 5.4 postoperatively. Improvement rate was 78%. The mean ODI was 14.6 postoperatively. The mean length of hospital stay, hospitalization costs and blood loss was 2.5 days, 00 and 15 mL, respectively. No complication or recurrence was observed in any of the patients at the final follow-up. Full-endoscopic transforaminal procedure is a safe and effective technique. It is economical, acceptable and mini-invasive. Of course, it also can shorten the length of hospital stay and decrease bleeding. For revision surgery to treat ASD, this technique can achieve good clinical effects.