Search

[123I]IBZM is used widely for in vivo imaging of D2 receptors in human brain and shows relatively fast kinetics and a greater susceptibility to synaptic dopamine release than other single-photon emission computed tomography (SPECT) radioligands. A reliable and reversed-phase HPLC method using UV/VIS and radiometric detectors has been developed for qualitative analysis of BZM and IBZM and radiochemical purity in [123I]IBZM preparations. The method uses gradient elution on a Zorbax XDB C-18 column with a mobile phase that consists of 10mM 3,3-dimethylglutaric acid (DMGA), pH 7.0 and acetonitrile (ACN). The flow rate was 1.0mL/min with detection at λ=254nm. The method was validated for system suitability, precision, accuracy, specificity, linearity, robustness, limit of detection (LOD) and limit of quantification (LOQ), as described in ICH guidelines. The results are described as follows: (1) The system suitability includes the tailing factor, theoretical plate number and resolution, which are 0.962, 10656.11 and 9.367, respectively. (2) For specificity, the BZM and [123I]NH4I did not interfere with the retention time of the [123I]IBZM. (3) The percentage coefficient of variation for analysis of precision, including repeatability and intermediate precision, is less than 2.0%. (4) Accuracy of the method is within the range of 85-100%. (5) The range of linearity is from 100% to 70% radiochemical purity (%RCP) of [123I]IBZM, with the correlation coefficient (R) always being above 0.995. (6) The data of method robustness are within acceptance criteria. (7) The LOD and LOQ for impurity (BZM) are 0.145 and 0.50μg/mL, respectively. All of the analysis results demonstrate that this method is sensitive, specific and suitable for routine analysis of the radiochemical purity in [123I]IBZM preparations.

[

A suitable three potential-time waveforms for the electrochemical detection of 2-deoxy-2-chloro-d-glucose (ClDG) by gold working electrode and palladium reference electrode have been developed and method validation was performed on Waters 2796 Bioalliance HPLC system coupled with pulsed amperometric detection (HPLC/PAD). FDG and ClDG could be completely separated by 50 mM NaOH mobile phase at a flow rate of 1.0 ml/min; 30 degrees C analytical column temperature; and E1 of 200 mV, T1 of 900 mS; E2 of -770 mV, T2 of 10 mS; E3 of 1400 mV, T3 of 10 mS; acquisition delay (AD) of 300 mS. The validation results were shown as follows: (1) in specificity study, mannose, FDG and ClDG could be completely separated and the retention times of these were 6.2, 11.1 and 13.5 min, respectively, with a total run time of 20 min; (2) the intraday repeatable precision expressed with the CV% in six successive analysis was 0.52% (for FDG) and 0.83% (for ClDG); (3) the interday variability precision expressed with the CV% value of the repeatable precision of 3 days was 0.99%, 0.52% and 0.58% for FDG and 0.71%, 0.83% and 1.24% for ClDG; both the CV% of intraday and interday reproducibilities of FDG and ClDG were better than 1.5%; (4) the accuracy and recovery of FDG and ClDG expressed with the percentage of mean value of three successive analysis were 99.75% (for FDG) and 100.68% (for ClDG) which were all greater than 95%; (5) under optimum conditions, the limit of detection of FDG and ClDG was 0.41 and 0.68 microg/ml, and the limit of quantization of FDG and ClDG was 1.24 and 2.04 microg/ml; (6) the correlation coefficient (r) value of linearity is over 0.999 by 5-50 microg/ml ranges of both compounds, respectively; (7) no interference peak effects by composition of mobile phase or increasing/decreasing flow rate or change of temperature was observed.

A series of 2-aryl-2-hydroxy-1,1,3,3-tetramethyl-5,8-dioxaspiro[3.4]octanes (1), 3-aryl-3-hydyoxyl-2,2,4,4-tetyramethylcyclobutanones (2), and l-aryl-2,2,4-trimethyl-1,3-pentadiones (3) were studied using 13C NMR analyses. The chemical shifts of C-c are dependent on the substituent groups on the phenyl ring for compounds 1 (ρ =-0.966, R2 = 0.987) and 2 (ρ = −1.378, R2 = 0.998). The chemical shifts of C-a follow a similar trend (ρ =−0.926, R2 = 0.989). In the case of compounds 3, C-c yielded the opposite trend with very poor correlation coefficiency (ρ = 1.22, R2 = 0.179). This result reveals the field effect of a polar bond and resonance-induced changes in pi electron-density at C-1 on the cyclobutanering series.

3-aryl-3-hydroxy-2,2,4,4-tetramethylcyclobutanones and 1-aryl-2,2,4-trimethyl-1,3-pentadiones were prepared from arylation of 1,1,3,3-tetramethyl-5,8-dioxapiro [3,4]octan-2-one followed by hydrolysis using THF and HCl respectively.

(18)F-labeled sodium fluoride ([(18)F]NaF) is a useful bone imaging agent that has been demonstrated to be significantly more accurate than (99m)Tc-labeled methylene diphosphonate for the detection of both sclerotic and lytic lesions in various malignancies. A reliable anion-exchange HPLC method equipped with suppressed conductivity and radioactive detectors has been developed in order to analyze the content of NaF and radiochemical purity in [(18)F]NaF radiopharmaceuticals. The method described for fluoride analysis uses an isocratic elution of NaF in a Hamilton anion-exchange column using a mobile phase that consists of 7.5 mM sodium carbonate and 0.018 mM potassium thiocyanate. The flow rate was 1.0 ml/min. The method was validated in accordance with several parameters, including system suitability, specificity, precision, accuracy, linearity, robustness, limit of detection and limit of quantification. The results are described as follows: (1) The system suitability includes the tailing factor, theoretical plate number and resolution, which are 1.192534, 2729.6594 and 16.7415, respectively. (2) For specificity, the solvent peak and chloride ion did not interfere with the retention time of the fluoride. (3) The percentage coefficient of variation for analysis of precision, including repeatability and intermediate precision, is less than 2.0%. (4) Accuracy of method is within the range of 98%-102%. (5) The range of linearity is from 10 to 400 μg/ml, with the correlation coefficient (R(2)) always being above 0.9985. (6) The data of method robustness are within acceptance criteria. (7) The limit of detection and limit of quantification are 0.0678 and 0.20 μg/ml, respectively. All of the analysis results demonstrate that this method is highly sensitive, convenient, specific and suitable for quantification of NaF over a wide linear range. Therefore, the method can be successfully performed for routine analysis of fluoride content in [(18)F]NaF radiopharmaceuticals and reduce the time required for analysis.