Search

The detection of environmental uranyl is attracting increasing attention. However, the available detection strategies mainly depend on the selective recognition of uranyl, which is subject to severe interference by coexisting metal ions. Herein, based on the unique uranyl‐triggered photocleavage property, the protein BSA is labelled with fluorescent molecules that exhibit an aggregation‐induced emission effect for uranyl detection. Uranyl‐triggered photocleavage causes the separation of the fluorescent‐molecule‐labelled protein fragments, leading to attenuation of the emission fluorescence, which is used as a signal for uranyl detection. This detection strategy shows high selectivity for uranyl and an ultralow detection limit of 24 pM with a broad detection range covering five orders of magnitude. The detection method also shows high reliability and stability, making it a promising technique for practical applications in diverse environments. [ABSTRACT FROM AUTHOR]

The detection of environmental uranyl is attracting increasing attention. However, the available detection strategies mainly depend on the selective recognition of uranyl, which is subject to severe interference by coexisting metal ions. Herein, based on the unique uranyl‐triggered photocleavage property, the protein BSA is labelled with fluorescent molecules that exhibit an aggregation‐induced emission effect for uranyl detection. Uranyl‐triggered photocleavage causes the separation of the fluorescent‐molecule‐labelled protein fragments, leading to attenuation of the emission fluorescence, which is used as a signal for uranyl detection. This detection strategy shows high selectivity for uranyl and an ultralow detection limit of 24 pM with a broad detection range covering five orders of magnitude. The detection method also shows high reliability and stability, making it a promising technique for practical applications in diverse environments. [ABSTRACT FROM AUTHOR]

Uranium extraction from seawater has attracted worldwide attention due to the massive reserves of uranium. Due to the straightforward synthesis and strong affinity toward uranyl ions (UO22+), the amidoxime group shows promise for use in highly efficient uranium capture. However, the low mass transfer efficiency within traditional amidoxime‐based adsorbents severely limits the adsorption rate and the utilization of adsorption sites. In this work, a macroporous polyamidoxime (PAO) hydrogel is prepared by yeast‐based biological foaming combined with ice crystal dispersion that effectively maintained the yeast activity. The yeast‐raised PAO (Y‐PAO) adsorbent has numerous bubble‐like holes with an average pore diameter >100 µm. These macropores connected with the intrinsic micropores of PAO to construct efficient diffusion channels for UO22+ provided fast mass transporting channels, leading to the sufficient exposure of hidden binding sites. The maximum adsorption capacity of Y‐PAO membrane reached 10.07 mg‐U/g‐ads, ≈1.54 times higher than that of the control sample. It took only eight days for Y‐PAO to reach the saturation adsorption capacity of the control PAO (6.47 mg‐U/g‐ads, 28 days). Meanwhile, Y‐PAO possessed excellent ion selectivity, good reusability, and low cost. Overall, the Y‐PAO membrane is a highly promising adsorbent for use in industrial‐scale uranium extraction from seawater. [ABSTRACT FROM AUTHOR]

The unique three‐dimensional structure of spidrion determines the outstanding mechanical properties of the spider silk fiber. Inspired by the similarity of the three‐dimensional structure of superb‐uranyl binding protein (SUP) to that of spidroin, a dual‐SUP (DSUP) chimeric protein fiber with high tensile strength is designed. The DSUP hydrogel fiber exhibits a loofah‐shape structure by the cross‐interaction of the protein nanofiber. Full exposure of abundant functional uranyl‐binding sites in the stretchable loofah‐shape hydrogel protein fiber give the DSUP fiber a groundbreaking uranium extraction capacity of 17.45 mg g−1 with an ultrashort saturation time of 3 days in natural seawater. This work reports the design of an adsorbent with ultrahigh uranium extraction capacity and explores a strategy for fabricating artificial high‐strength functional non‐spidroin protein fiber. [ABSTRACT FROM AUTHOR]

The unique three‐dimensional structure of spidrion determines the outstanding mechanical properties of the spider silk fiber. Inspired by the similarity of the three‐dimensional structure of superb‐uranyl binding protein (SUP) to that of spidroin, a dual‐SUP (DSUP) chimeric protein fiber with high tensile strength is designed. The DSUP hydrogel fiber exhibits a loofah‐shape structure by the cross‐interaction of the protein nanofiber. Full exposure of abundant functional uranyl‐binding sites in the stretchable loofah‐shape hydrogel protein fiber give the DSUP fiber a groundbreaking uranium extraction capacity of 17.45 mg g−1 with an ultrashort saturation time of 3 days in natural seawater. This work reports the design of an adsorbent with ultrahigh uranium extraction capacity and explores a strategy for fabricating artificial high‐strength functional non‐spidroin protein fiber. [ABSTRACT FROM AUTHOR]

A bio-inspired cellulose paper–poly(amidoxime) composite hydrogel is explored via UV-polymerization. This hydrogel has a highly efficient uranium capture capacity of up to 6.21 mg g−1 for WU/Wdry gel and 12.9 mg g−1 for WU/Wpoly(amidoxime) in seawater for 6 weeks, due to its enhanced hydrophilicity, good hydraulic/ionic conductivity and broad-spectrum antibacterial performance. [ABSTRACT FROM AUTHOR]

Biology has evolved excellent spatial structures for high‐selectivity and high‐affinity capture of heavy metals. Inspired by the spatial structure of the superb‐uranyl binding protein SUP, we mimic the spatial structure of SUP in metal–organic frameworks (MOFs). The MOF UiO‐66‐3C4N fabricated by introducing 4‐aminoisophthalic acid into UiO‐66 shows high uranyl adsorption capacity both in simulated seawater and in natural seawater. In natural seawater, UiO‐66‐3C4N exhibits 17.03 times higher uranium extraction capacity than that of vanadium, indicating the high selectivity of the adsorbent. The EXAFS analysis and DFT calculation reveal that UiO‐66‐3C4N forms smaller nano‐pocket for uranyl capture than that of SUP protein, which can both restrict the entrance of the other interfering ions with larger size and reinforce the binding by increasing the coordination interaction, and therefore qualify the nano‐pocket with high affinity and high selectivity to uranyl. [ABSTRACT FROM AUTHOR]

Biology has evolved excellent spatial structures for high‐selectivity and high‐affinity capture of heavy metals. Inspired by the spatial structure of the superb‐uranyl binding protein SUP, we mimic the spatial structure of SUP in metal–organic frameworks (MOFs). The MOF UiO‐66‐3C4N fabricated by introducing 4‐aminoisophthalic acid into UiO‐66 shows high uranyl adsorption capacity both in simulated seawater and in natural seawater. In natural seawater, UiO‐66‐3C4N exhibits 17.03 times higher uranium extraction capacity than that of vanadium, indicating the high selectivity of the adsorbent. The EXAFS analysis and DFT calculation reveal that UiO‐66‐3C4N forms smaller nano‐pocket for uranyl capture than that of SUP protein, which can both restrict the entrance of the other interfering ions with larger size and reinforce the binding by increasing the coordination interaction, and therefore qualify the nano‐pocket with high affinity and high selectivity to uranyl. [ABSTRACT FROM AUTHOR]

Based on the photoinduced photothermal, photoelectric, and photocatalytic effects of black phosphorus (BP) nanosheets, a BP‐PAO fiber with enhanced uranium extraction capacity and high antibiofouling activity is fabricated by compositing BP nanosheets into polyacrylamidoxime (PAO). The photothermal effect increases the coordination interaction between UO22+ and the functional amidoxime group, and the photoelectric effect produces the surface positive electric field that exhibits electrostatic attraction to the negative [UO2(CO3)3]4−, which all increase the capacity for uranium adsorption. The photocatalytic effect endows the adsorbent with high antibiofouling activity by producing biotoxic reactive oxygen species. Owing to these three photoinduced effects, the photoinduced BP‐PAO fiber shows a high uranium adsorption capacity of 11.76 mg g−1, which is 1.50 times of the PAO fiber, in bacteria‐containing natural seawater. [ABSTRACT FROM AUTHOR]

Based on the photoinduced photothermal, photoelectric, and photocatalytic effects of black phosphorus (BP) nanosheets, a BP‐PAO fiber with enhanced uranium extraction capacity and high antibiofouling activity is fabricated by compositing BP nanosheets into polyacrylamidoxime (PAO). The photothermal effect increases the coordination interaction between UO22+ and the functional amidoxime group, and the photoelectric effect produces the surface positive electric field that exhibits electrostatic attraction to the negative [UO2(CO3)3]4−, which all increase the capacity for uranium adsorption. The photocatalytic effect endows the adsorbent with high antibiofouling activity by producing biotoxic reactive oxygen species. Owing to these three photoinduced effects, the photoinduced BP‐PAO fiber shows a high uranium adsorption capacity of 11.76 mg g−1, which is 1.50 times of the PAO fiber, in bacteria‐containing natural seawater. [ABSTRACT FROM AUTHOR]

Based on both the compatibility principle of similar polymeric structures and the steric interaction, a polyether amine (D2000) modified MOF (UIO-66) was dispersed into an ionic liquid with a polyether structure to form a new porous liquid (called the UIO-66-liquid) at room temperature. This unique UIO-66-liquid showed an outstanding CO2 uptake capacity among the existing porous liquids. [ABSTRACT FROM AUTHOR]

By chemical cross‐linking the amidoxime group onto dual‐surfaces of natural ore materials, namely halloysite nanotubes (HNTs), an efficient adsorbent, AO‐HNTs, is developed. AO‐HNTs show high uranium adsorption capacity of 456.24 mg g−1 in 32 ppm uranium‐spiked simulated seawater. In natural seawater, AO‐HNTs reach the high uranium extraction capacity of 9.01 mg g−1 after 30 days' field test. The dual‐surface amidoximated hollow nanotubular AO‐HNTs exhibit more coordination active sites for uranium adsorption, which is attributed to the high and fast uranium adsorption capacity. Because of the stable natural ore structure, AO‐HNTs also show long service life. Benefiting from the low cost of HNTs, the cost for uranium extraction from seawater is close to the uranium price in the spot uranium market, suggesting that AO‐HNTs could be used for economical extraction of uranium from the oceans. [ABSTRACT FROM AUTHOR]

By chemical cross‐linking the amidoxime group onto dual‐surfaces of natural ore materials, namely halloysite nanotubes (HNTs), an efficient adsorbent, AO‐HNTs, is developed. AO‐HNTs show high uranium adsorption capacity of 456.24 mg g−1 in 32 ppm uranium‐spiked simulated seawater. In natural seawater, AO‐HNTs reach the high uranium extraction capacity of 9.01 mg g−1 after 30 days' field test. The dual‐surface amidoximated hollow nanotubular AO‐HNTs exhibit more coordination active sites for uranium adsorption, which is attributed to the high and fast uranium adsorption capacity. Because of the stable natural ore structure, AO‐HNTs also show long service life. Benefiting from the low cost of HNTs, the cost for uranium extraction from seawater is close to the uranium price in the spot uranium market, suggesting that AO‐HNTs could be used for economical extraction of uranium from the oceans. [ABSTRACT FROM AUTHOR]

For the practical extraction of uranium from seawater, adsorbents with high adsorption capacity, fast equilibrium rate, high selectivity, and long service life are needed. Herein, a chimeric spidroin‐based super uranyl‐binding protein (SSUP) fiber was designed by fusing the gene of super uranyl‐binding protein (SUP) with the gene of spidroin. SUP endowed the SSUP fiber with high affinity and selectivity to uranium, and spidroin gave the SSUP fiber with high mechanical strength and high reusability. The wet SSUP fiber is a water‐rich hydrogel‐like structure, which provided abundant hydrophilic intermolecular space for the entrance of uranyl ions, and could accelerate the rate for uranium adsorption. In seawater, the SSUP fiber achieved a breakthrough uranium extraction capacity of 12.33 mg g−1 with an ultrashort equilibration time of 3.5 days, suggesting that SSUP fiber might be a promising adsorbent for uranium extraction from the natural seawater. [ABSTRACT FROM AUTHOR]

For the practical extraction of uranium from seawater, adsorbents with high adsorption capacity, fast equilibrium rate, high selectivity, and long service life are needed. Herein, a chimeric spidroin‐based super uranyl‐binding protein (SSUP) fiber was designed by fusing the gene of super uranyl‐binding protein (SUP) with the gene of spidroin. SUP endowed the SSUP fiber with high affinity and selectivity to uranium, and spidroin gave the SSUP fiber with high mechanical strength and high reusability. The wet SSUP fiber is a water‐rich hydrogel‐like structure, which provided abundant hydrophilic intermolecular space for the entrance of uranyl ions, and could accelerate the rate for uranium adsorption. In seawater, the SSUP fiber achieved a breakthrough uranium extraction capacity of 12.33 mg g−1 with an ultrashort equilibration time of 3.5 days, suggesting that SSUP fiber might be a promising adsorbent for uranium extraction from the natural seawater. [ABSTRACT FROM AUTHOR]

For the practical extraction of uranium from seawater, adsorbents with high adsorption capacity, fast equilibrium rate, high selectivity, and long service life are needed. Herein, a chimeric spidroin‐based super uranyl‐binding protein (SSUP) fiber was designed by fusing the gene of super uranyl‐binding protein (SUP) with the gene of spidroin. SUP endowed the SSUP fiber with high affinity and selectivity to uranium, and spidroin gave the SSUP fiber with high mechanical strength and high reusability. The wet SSUP fiber is a water‐rich hydrogel‐like structure, which provided abundant hydrophilic intermolecular space for the entrance of uranyl ions, and could accelerate the rate for uranium adsorption. In seawater, the SSUP fiber achieved a breakthrough uranium extraction capacity of 12.33 mg g−1 with an ultrashort equilibration time of 3.5 days, suggesting that SSUP fiber might be a promising adsorbent for uranium extraction from the natural seawater. [ABSTRACT FROM AUTHOR]

Bacillus cereus is widely distributed food-borne pathogenic bacterium. Due to the harmness to human hearth and the generation of multidrug-resistant B. cereus, it is urgent to develop novel antimicrobial agents. Phage and phage endolysin were taken as novel antimicrobial substance for their specific lytic activity against pathogenic bacteria. In this study, a Myoviridae family phage, designated as vB_BceM-HSE3, infecting the pathogenic multidrug-resistant B. cereus strain was isolated and characterized along with its endolysin. Phage vB_BceM-HSE3 can specially infect the B. cereus group strains, including B. cereus, B. anthracis, and B. thuringiensis, and exhibits high temperature and pH tolerance, which endow it with high potential for been used in controlling pathogenic B. cereus group strains. Genomic analysis reveals that vB_BceM-HSE3 is a novel phage and only shows extremely low genome similarity with available phage genome. Functional analysis of endolysin PlyHSE3 encoding by vB_BceM-HSE3 shows that PlyHSE3 exhibits broader lytic spectrum than the phage and can lyse all the tested B. cereus group strains as well as the tested pathogenic strain of P. aeruginosa. PlyHSE3 also shows broad temperature and pH tolerance, and can efficiently lyse B. cereus strain at temperature at 4 °C and higher than 45 °C, which indicating that PlyHSE3 might can be used in controlling food-borne B. cereus during both the cold storage of food and the stage after the heat treatment of food. The findings of this study enrich our understanding of phage diversity as well as providing resources for developing phage therapy. [ABSTRACT FROM AUTHOR]

Tailed phages with genomes larger than 200 kbp are classified as jumbo phage and exhibit extremely high diversity. In this study, a novel jumbo phage, vB_BpuM_BpSp, infecting pathogenic Bacillus pumilus, the cause of ginger rhizome rot disease, was isolated. Notable features of phage vB_BpuM_BpSp are the large phage capsid of 137 nm and baseplate-attached curly tail fibers. The genome of the phage is 255,569 bp in size with G+C content of 25.9 %, and it shows low similarity to known biological entities. The phage genome contains 318 predicted coding sequences. Among these predicted coding sequences, 26 genes responsible for nucleotide metabolism were found, and seven structural genes could be identified. The findings of this study provide new understanding of the genetic diversity of phages. [ABSTRACT FROM AUTHOR]

Cloning of new toxic genes from Bacillus thuringiensis (Bt) and construction of Bt engineered strains are two key strategies for bio-control of coleopteran pests in agriculture and forestry. In this study, we cloned a new cry3Aa-type gene, cry3Aa8, from wild Bt strain YC-03 against coleopteran, and constructed a Bt engineered strain, ACE-38, containing insecticidal protein-encoding gene cry3Aa8. The engineered strain, with almost four times of Cry3Aa yield compared with strain YC-03, was an antibiotic marker-free strain. Though no selective pressure was presented in the medium, cry3Aa8 in the engineered strain ACE-38 remained stable. The yield of Cry3Aa by strain ACE-38 reached 2.09 mg/ml in the optimized fermentation medium. The activity of strain ACE-38 against Plagiodera versicolora was tested, and the LC of ACE-38 cultures in the optimized fermentation medium was 1.13 μl/ml. Strain ACE-38 is a non-antibiotic Bt engineered strain with high Chrysomelidae toxicity and exhibits good fermentation property. The modified indigenous site-specific recombination system constructed in this study might be useful for the construction of Bt engineered strains containing genes that cannot be expressed in the indigenous site-specific recombination system using plasmid pBMB1205R. [ABSTRACT FROM AUTHOR]

Uranium is a heavy metal with both chemotoxicity and radiotoxicity. Due to the increasing consumption of uranium, the remediation of uranium contamination and recovery of uranium from non-conventional approach is highly needed. Microorganism exhibits high potential for immobilization of uranium. This study for the first time isolated a marine Pseudomonas stutzeri strain MRU-UE1 with high uranium immobilization capacity of 308.72 mg/g, which is attributed to the synergetic mechanisms of biosorption, biomineralization, and bioreduction. The uranium is found to be immobilized in forms of tetragonal chernikovite (H 2 (UO 2) 2 (PO 4) 2 ·8H 2 O) by biomineralization and CaU(PO 4) 2 by bioreduction under aerobic environment, which is rarely observed and would broaden the application of this strain in aerobic condition. The protein, phosphate group, and carboxyl group are found to be essential for the biosorption of uranium. In response to the stress of uranium, the strain produces inorganic phosphate group, which transformed soluble uranyl ion to insoluble uranium-containing precipitates, and poly-β-hydroxybutyrate (PHB), which is observed for the first time during the interaction between microorganism and uranium. In summary, P. stutzeri strain MRU-UE1 would be a promising alternative for environmental uranium contamination remediation and uranium extraction from seawater. [Display omitted] • Pseudomonas stutzeri strain is used for uranium accumulation for the first time. • P. stutzeri strain MRU-UE1 exhibits uranium immobilization capacity of 308.72 mg/g. • Synergy of biosorption, biomineralization, and bioreduction is observed. • Bioreduction of uranium by bacteria happens under aerobic environment. • Production of PHB is observed for the first time to resist the toxicity of uranium. [ABSTRACT FROM AUTHOR]

Abstract: Bacillus thuringiensis (Bt) has been widely used for 50years as a biopesticide for controlling insect pests. However, bacteriophage infection can cause failures in 50%–80% of the batches during Bt fermentation, resulting in severe losses. In the present work, the physiological and biochemical impacts of Bt strain CS33 have been studied during bacteriophage infection. This study adopted a gel-based proteomics approach to probe the sequential changed proteins in phage-infected Bt cells. To phage, it depressed the host energy metabolism by suppressing the respiration chain, the TCA cycle, and the utilization of PHB on one hand; on the other hand, it hijacked the host translational machine for its own macromolecular synthesis. To host, superinfection exclusion might be triggered by the changes of S-layer protein and flagella related proteins, which were located on the cell surface and might play as the candidates for the phage recognition. More importantly, the growth rate, cell mass, and ICPs yield were significantly decreased. The low yield of ICPs was mainly due to the suppressed utilization of PHB granules. Further functional study on these altered proteins may lead to a better understanding of the pathogenic mechanisms and the identification of new targets for phage control. Biological significance: B. thuringiensis (Bt) has been widely used for 50years as a safe biopesticide for controlling agricultural and sanitary insect pests. However, bacteriophage infection can cause severe losses during B. thuringiensis fermentation. The processes and consequences of interactions between bacteriophage and Bt were still poorly understood, and the molecular mechanisms involved were more unknown. This study adopted a gel-based proteomics approach to probe the physiological and biochemical impacts of Bt strain CS33 after phage-infection. The interactions between phage BtCS33 and its host Bt strain CS33 occurred mainly on four aspects. First, phage synthesized its nucleic acids through metabolic regulation by increasing the amount of NDK. Second, it is reasonable to infer that a phage resistance or superinfection exclusion was triggered by several increased or decreased proteins (SLP, FliD, FlaB), which were located on the cell surface and might play as candidates for the phage recognition. Third, combining the decreased flavoproteins (SdhA and EtfB) and the down regulated Fe–S cluster biosynthesis pathway together, it can be suggested that the respiration chain was weakened after phage infection. Additionally, three key enzymes (AcnB, FumC and AdhA) involved in the TCA cycle were all decreased, indicating the TCA cycle was seriously inhibited after infection. Fourth, the growth rate, cell mass and ICPs yield of the host were significantly decreased. To the best of our knowledge, this work represents the first systematic study on the interactions of an insecticidal bacterium with its phage, and has contributed novel information to understand the molecular events in the important biological pesticide producer, B. thuringiensis, in response to phage challenge. [Copyright &y& Elsevier]

[Display omitted] • A charge balanced adsorbent is fabricated for uranium extraction from seawater. • The adsorbent can resistant both biofouling and abiotic fouling. • The uranium extraction capacity is highly enhanced. • The uranium adsorption ability and anti-adhesive ability are highly reusable. The extraction of uranium from seawater is vital to meet the increase demands of uranium resource for the nuclear energy industry, while it is severe hazarded by the marine fouling, including both the biofouling and abiotic fouling. Previous reports only focused on the control of biofouling and rare attention is paid to the abiotic fouling. However, the abiotic fouling is the fundamental of the biofouling. Herein, a charged balanced hydrogel adsorbent is fabricated by introducing the charge-positive tetraethylenepentamine (TEPA) into the charge-negative polyacrylamidoxime (PAO). The fabricated PAO-CB hydrogel membrane shows high anti-adhesive ability to the marine fouling, including both the biofouling and abiotic fouling, which is due to the decrease of the charge attraction between the adsorbent and the charged contaminants. Benefitting from the reduce of marine fouling, the PAO-CB hydrogel membrane shows a high uranium extraction capacity of 8.59 mg g−1, which is higher than that of PAO hydrogel membrane by 44.59%. The finding of this study indicates that the construction of charge balanced adsorbent would be an effective strategy to control the complicated marine fouling during uranium extraction from seawater. [ABSTRACT FROM AUTHOR]

[Display omitted] • A charge balanced adsorbent is fabricated for uranium extraction from seawater. • The adsorbent can resistant both biofouling and abiotic fouling. • The uranium extraction capacity is highly enhanced. • The uranium adsorption ability and anti-adhesive ability are highly reusable. The extraction of uranium from seawater is vital to meet the increase demands of uranium resource for the nuclear energy industry, while it is severe hazarded by the marine fouling, including both the biofouling and abiotic fouling. Previous reports only focused on the control of biofouling and rare attention is paid to the abiotic fouling. However, the abiotic fouling is the fundamental of the biofouling. Herein, a charged balanced hydrogel adsorbent is fabricated by introducing the charge-positive tetraethylenepentamine (TEPA) into the charge-negative polyacrylamidoxime (PAO). The fabricated PAO-CB hydrogel membrane shows high anti-adhesive ability to the marine fouling, including both the biofouling and abiotic fouling, which is due to the decrease of the charge attraction between the adsorbent and the charged contaminants. Benefitting from the reduce of marine fouling, the PAO-CB hydrogel membrane shows a high uranium extraction capacity of 8.59 mg g−1, which is higher than that of PAO hydrogel membrane by 44.59%. The finding of this study indicates that the construction of charge balanced adsorbent would be an effective strategy to control the complicated marine fouling during uranium extraction from seawater. [ABSTRACT FROM AUTHOR]

Efficient removal of uranium from uranium‐containing nuclear wastewater is of great significance for utilizing uranium resources and protecting the environment from uranium hazards. In this paper, a polyamidoxime‐coated coconut haustorium derived magnetic biochar (CHMBC‐PAO) composite adsorbent with excellent adsorption performance, magnetism, recyclability, and photothermal conversion properties in complex environments is prepared through a simple soak‐gelation coating method for efficient removal of uranium from nuclear wastewater. The coconut haustorium biochar, carbonized by a sponge‐like organ inside the sprouted coconut, can provide rich functional groups and electronegative surface, which are conducive to the loading of functional materials and the adsorption of uranyl, respectively. The CHMBC‐PAO presents 2.4 emu g−1 saturation magnetization, making it can be efficiently recovered through magnetic recovery. It can convert absorbed light into thermal energy through molecular thermal vibration and non‐radiative relaxation process of excitons. Enhanced by the photothermal effect, CHMBC‐PAO shows an extra high uranium adsorption capacity of 310.30 mg g−1 in acidic nuclear wastewater within a short period of time, surpassing the adsorption capacity of most reported uranium removal materials. Meanwhile, the CHMBC‐PAO also presented excellent ion selectivity and reusability. Therefore, CHMBC‐PAO composite adsorbent can be considered as a potential candidate for treating radioactive nuclear wastewater. [ABSTRACT FROM AUTHOR]

Hot corrosion caused by molten calcium–magnesium-aluminosilicate (CMAS) is one of the significant failure factors of thermal barrier coating (TBC). Scandium tantalite (ScTaO 4) is expected to be a next generation of TBC material because of its great thermophysical characteristics. This study focused on high-temperature corrosion behaviors of ScTaO 4 ceramic exposure to molten CMAS at 1300 °C. During corrosion experiments, a clear but discontinuous reaction layer containing CaTa 2 O 6 and Sc 2 SiO 5 was observed, which was formed by dissolution reprecipitation. In addition, ScTaO 4 showed good phase stability and maintained monoclinic wolframite structure with P2/c (13) space group in the corrosion tests. Moreover, Ca, Mg and Al were all kept away from the ScTaO 4 ceramic due to low solubility of Sc3+ in the CMAS. Therefore, ScTaO 4 ceramic owns great ability to resist the corrosion of CMAS. Good phase stability enables ScTaO 4 to stably exist at high temperature, reducing volume change, thus extending the service life of the coating. Meanwhile, great corrosion resistance of CMAS reduces the consumption of ScTaO 4 under adverse environmental conditions, further extending the service life of the coating. In summary, ScTaO 4 is a new kind of potential thermal barrier material to replace YSZ ceramic. • ScTaO 4 owns excellent thermal and physical properties. • Hot corrosion behaviors of ScTaO4 ceramic exposure to molten CMAS at 1300 °C were investigated. • No significant corrosion reaction was observed. • ScTaO 4 has a relatively good CMAS corrosion resistance due to low solubility of Sc3+ in the CMAS. • ScTaO 4 is a new kind of potential thermal barrier material to replace YSZ ceramic. [ABSTRACT FROM AUTHOR]

Frontispiz: A Bio-inspired Nano-pocket Spatial Structure for Targeting Uranyl Capture Inspiriert durch die räumliche Struktur des Super-Uranyl-Bindungsproteins bilden N. Wang et al. eine Nanotasche in einem MOF chemisch nach. Wie in ihrer Mitteilung auf S. 4292 berichtet, zeigt die Nanotasche eine gezielte Uranylaufnahme in natürlichem Meerwasser. [Extracted from the article]

Highly‐efficient recovery of uranium from seawater is of great concern in the growing demand for nuclear energy. Bacteria are thought to be potential alternatives for uranium recovery. Herein, a Bacillus velezensis strain, UUS‐1, with highly‐efficient uranium immobilization capacity is isolated and is used in the recovery of uranium from seawater. The strain exhibits time‐dependent uranium recovery capacity and only immobilizes uranium after growing for 12 h. The carboxyl group together with the amino group inside the bacterial cells, but not previously identified phosphate group, are essential for uranium immobilization. UUS‐1 shows broad‐spectrum antimicrobial activity by producing diverse antimicrobial metabolites, which endows the strain with innate resistance to the biofouling of marine microorganisms. Based on the dry weight of the initially used bacterial cultures, UUS‐1 concentrates uranium by 6.26 × 105 times and reaches the high immobilization capacity of 9.46 ± 0.39 mg U g−1 bacterial cultures in real seawater within 48 h, which is the fastest uranium immobilization capacity observed from real seawater. Overall considering the ultrafast and highly‐efficient uranium recovery capacity and the innate anti‐biofouling activity, UUS‐1 is a promising alternative for uranium recovery from seawater. [ABSTRACT FROM AUTHOR]

The ocean reserves 4.5 billion tons of uranium and amounts to a nearly inexhaustible uranium supply. Biofouling in the ocean is one of the most severe factors that hazard uranium extraction and even cause the failure of uranium extraction. Therefore, development of uranium adsorbents with biofouling resistance is highly urgent. Herein, a strategy for constructing anti‐biofouling adsorbents with enhanced uranium recovery capacity in natural seawater is developed. This strategy can be widely applied to modify currently available carboxyl‐contained adsorbents, including the most popular amidoxime‐based adsorbent and carboxyl metal organic framework adsorbent, using a simple one‐step covalent cross‐link reaction between the antibacterial compound and the adsorbent. The prepared anti‐biofouling adsorbents display broad antibacterial spectrum and show more than 80% inhibition to the growth of marine bacteria. Benefitting from the tight covalent cross‐link, the anti‐biofouling adsorbents show high reusability. The modified amidoxime‐based adsorbents show enhanced uranium recovery capacity both in sterilized and bacteria‐contained simulated seawater. The anti‐biofouling adsorbent Anti‐UiO‐66 constructed in this study exhibits 24.4% increased uranium recovery capacity, with a uranium recovery capacity of 4.62 mg‐U per g‐Ads, after a 30‐day field test in real seawater, suggesting the strategy is a promising approach for constructing adsorbents with enhanced uranium extraction performance. [ABSTRACT FROM AUTHOR]

The coevolution between phage and host bacterium is an important force that drives the evolution of the microbial community, yet the coevolution mechanisms have still not been well analyzed. Here, by analyzing the interaction between a Bacillus phage vB_BthS_BMBphi and its host bacterium, the coevolution mechanisms of the first-generation phage-resistant bacterial mutants and regained-infectivity phage mutants were studied. The phage-resistant bacterial mutants showed several conserved mutations as a potential reason for acquiring phage resistance, including the mutation in flagellum synthesis protein FlhA and cell wall polysaccharide synthesis protein DltC. All the phage-resistant bacterial mutants showed a deleted first transmembrane domain of the flagellum synthesis protein FlhA. Meanwhile, the regain-infectivity phage mutants all contained mutations in three baseplate-associated phage tail proteins by one nucleotide, respectively. A polymorphism analysis of the three mutant nucleotides in the wild-type phage revealed that the mutations existed before the interaction of the phage and the bacterium, while the wild-type phage could not infect the phage-resistant bacterial mutants, which might be because the synchronized mutations of the three nucleotides were essential for regaining infectivity. This study for the first time revealed that the synergism mutation of three phage baseplate-associated proteins were essential for the phages' regained infectivity. Although the phage mutants regained infectivity, their storage stability was decreased and the infectivity against the phage-resistant bacterial mutants was reduced, suggesting the phage realized the continuation of the species by way of "dying to survive". [ABSTRACT FROM AUTHOR]

Highly efficient recovery of uranium from seawater is of great concern because of the growing demand for nuclear energy. The use of amidoxime‐based polymeric fiber adsorbents is considered to be a promising approach because of their relatively high specificity and affinity to uranyl. The surface area, hydrophility, and surface charge of the adsorbent are reported to be critical factors that influence uranium recovery efficiency. Here, a porous amidoxime‐based nanofiber adsorbent (SMON–PAO) that exhibits the highest uranium recovery capacity among the existing fiber adsorbents both in 8 ppm uranium spiked seawater (1089.36 ± 64.31 mg‐U per g‐Ads) and in natural seawater (9.59 ± 0.64 mg‐U per g‐Ads) is prepared by blow spinning. These nanofibers are obtained by compositing polyacrylamidoxime with montmorillonite and exhibit the increased surface area and more exposed functional amidoxime moieties for uranyl adsorption. The residual montmorillonite enhances the hydrophility and reduces the negative surface charge, thereby increasing the contact of the adsorbent with seawater and reducing the charge repulsion between negative amidoxime group and negative uranyl species ([UO2(CO3)3]4−). The finding of this study indicates that rational design of uranium recovery adsorbents by comprehensive utilizing the key factors that influence uranium recovery performance is a promising approach for developing economically feasible uranium recovery materials. A porous amidoxime‐based nanofiber adsorbent (SMON–PAO) is rationally designed to achieve high uranium recovery capacity from seawater and fabricated by blow spinning. This finding indicates that design of uranium recovery adsorbents by comprehensively utilizing the factors that influence uranium recovery performance, which are surface area, hydrophility, and surface charge, is a promising approach for developing economically feasible uranium recovery adsorbents. [ABSTRACT FROM AUTHOR]

Stimuli‐responsive polymer materials having high stretchability and robust toughness are more promising for applications in wearable electronics, soft robotics, and sensors. Herein, a micropatterned single‐layered polymer soft actuator is reported that can be stretched to 600% of its original length with the strength reaching 40 MPa. The prominent mechanical stretchability comes from the modification of poly(vinylidene fluoride) (PVDF) by using 3‐methacryloxypropyltrimethoxysilane (MS), followed by the treatment with mechanical uniaxial stretching. The uniaxial stretching induces microscopic patterning of the PVDF/MS composite actuator, making it capable of kinematics‐controllable movements in response to acetone vapors. The mechanically strong single‐layered vaporesponsive PVDF/MS actuator overcomes many drawbacks of polymer bilayer actuators that might undergo interfacial failure and inactivation caused by less‐than‐perfect mechanical properties. Driven by acetone vapors, the PVDF/MS actuator demonstrates highly efficient energy conversion and sensing abilities with simulating artificial muscles for inducing the movements of various paper dolls. A micropatterned single‐layered polymer soft actuator is reported. The actuator is capable of kinematics‐controllable movements in response to acetone vapors, and overcomes many drawbacks of polymer bilayer actuators that may undergo interfacial failure and inactivation caused by less‐than‐perfect mechanical properties. [ABSTRACT FROM AUTHOR]

Phages, the parasites of bacteria, are considered as a new kind of antimicrobial agent due to their ability to lyse pathogenic bacteria. Due to the increase of available phage isolates, the newly isolated phage showed increasing genomic similarities with previously isolated phages. In this study, the novel phage vB_BthS_BMBphi, infecting the Bacillus thuringiensis strain BMB171, is isolated and characterized together with its endolysin. This phage is the first tadpole-like phage infecting the Bacillus strains. Genomic analysis shows that the phage genome is dissimilar to all those of previously characterized phages, only exhibiting low similarities with partial regions of the B. thuringiensis prophages. Phylogenetic analysis revealed that the phage was distant from the other Bacillus phages in terms of evolution. The novel genome sequence, the distant evolutionary relationship, and the special virion morphology together suggest that the phage vB_BthS_BMBphi could be classified as a new phage lineage. The genome of the phage is found to contain a restriction modification system, which might endow the phage with immunity to the restriction modification system of the host bacterium. The function of the endolysin PlyBMB encoded by the phage vB_BthS_BMBphi was analyzed, and the endolysin could lyse all the tested Bacillus cereus group strains, suggesting that the endolysin might be used in controlling pathogenic B. cereus group strains. The findings of this study enrich the understanding of phage diversity and provide a resource for controlling the B. cereus group pathogenic bacteria. [ABSTRACT FROM AUTHOR]

Nuclear accidents and the improper disposal of nuclear wastes have led to serious environmental radioactive pollutions. The rational design of adsorbents for the highly efficient separation of strontium(II) is essential in treating nuclear waste and recovering radioactive strontium resources. Metal–organic frameworks (MOFs) are potential materials for the separation of aqueous metal ions owing to their designable structure and tunable functionality. Herein, a novel 3D MOF material MOF‐18Cr6, in which 1D channels are formed using 18‐crown‐6‐ether‐containing ligands as channel walls, is fabricated for strontium(II) separation. In contrast to traditional MOFs designed by grafting functional groups in the framework pores, MOF‐18Cr6 possesses regular 18‐crown‐6‐ether cavities on the channel walls, which not only can transport and intake strontium(II) via the channels, but also prevent blockage of the channels after the binding of strontium(II). Consequently, the functional sites are fully utilized to achieve a high strontium(II) removal rate of 99.73 % in simulated nuclear wastewater. This study fabricates a highly promising adsorbent for the separation of aqueous radioactive strontium(II), and more importantly, can provide a new strategy for the rational design of high‐performance MOF adsorbents for separating target substances from complex aqueous environments. [ABSTRACT FROM AUTHOR]

Nuclear accidents and the improper disposal of nuclear wastes have led to serious environmental radioactive pollutions. The rational design of adsorbents for the highly efficient separation of strontium(II) is essential in treating nuclear waste and recovering radioactive strontium resources. Metal–organic frameworks (MOFs) are potential materials for the separation of aqueous metal ions owing to their designable structure and tunable functionality. Herein, a novel 3D MOF material MOF‐18Cr6, in which 1D channels are formed using 18‐crown‐6‐ether‐containing ligands as channel walls, is fabricated for strontium(II) separation. In contrast to traditional MOFs designed by grafting functional groups in the framework pores, MOF‐18Cr6 possesses regular 18‐crown‐6‐ether cavities on the channel walls, which not only can transport and intake strontium(II) via the channels, but also prevent blockage of the channels after the binding of strontium(II). Consequently, the functional sites are fully utilized to achieve a high strontium(II) removal rate of 99.73 % in simulated nuclear wastewater. This study fabricates a highly promising adsorbent for the separation of aqueous radioactive strontium(II), and more importantly, can provide a new strategy for the rational design of high‐performance MOF adsorbents for separating target substances from complex aqueous environments. [ABSTRACT FROM AUTHOR]

Ultra-dense (99.2%) and ultra-stable Li7La3Zr2O12 were synthesized via a spark plasma sintering (SPS) technique, which were applied as solid-state electrolytes in Li metal extraction from seawater. 198 μg cm−2 h−1 of extraction efficiency and 1.0%–3.7% of power comsumption showed their promising potential for Li metal extraction. [ABSTRACT FROM AUTHOR]

Klebsiella pneumoniae is a widespread pathogen of several human diseases. The emergence of multidrug-resistant K. pneumoniae makes the treatment of these diseases a significant challenge. The application of bacteriophages is a potential approach for dealing with the emergence of multidrug-resistant pathogenic bacteria. This study isolates a novel bacteriophage vB_KleM_KB2 that infects the multidrug-resistant clinical isolates of K. pneumoniae. The bacteriophage exhibits a short latent period of 10 min, and can effectively lyse the bacterium within 60 min. Notably, the bacteriophage can completely inhibit the growth of the host bacterium at the initial concentration of 107 CFU/mL with a low multiplicity of infection of 0.001, which proves its high lytic activity. Furthermore, the bacteriophage shows high environmental tolerances, which can facilitate the practical application of the bacteriophage. Analysis of the bacteriophage genome shows that the bacteriophage possesses a novel genome sequence and can represent a new bacteriophage genus. Considering the high lytic activity, short latent period, high stability, and novel genetic background, bacteriophage vB_KleM_KB2 enriches the bacteriophage library and provides a new alternative for controlling the diseases caused by multidrug-resistant pathogenic K. pneumoniae. [ABSTRACT FROM AUTHOR]

Bacillus pumilus has been widely identified as a pathogen of plant and human, while the genetic information is rarely available for pathogenic B. pumilus strains. B. pumilus GR8 is a pathogen that causes ginger rhizome rot disease by invading ginger rhizome parenchymatous tissues, growing in the extracellular space, and producing plant cell wall-degrading enzymes to destroy ginger cells. In this study, the genome of GR8 was sequenced and characterized. This genome was the third completely sequenced genome of the B. pumilus species, and it exhibited high similarity to the genome of the B. pumilus strain B6033. The genome of GR8 was 3.67 Mb in length and encoded 3,713 putative ORFs. Among these predicted proteins, numerous plant cell wall-degrading enzymes and several proteins associated with invading and adapting to the environment in the extracellular space of the ginger rhizome parenchymatous tissue were found. The GR8 genome contained only one restriction-modification system and no CRISPR/Cas system. The lack of phage-resistant system suggested that phages might be potential agents for the control of GR8. The genomic analysis of GR8 provided the understanding to the pathogenesis and the phage-control strategy of pathogenic B. pumilus strains. [ABSTRACT FROM AUTHOR]

As the power‐conversion efficiency (PCE) of organic–inorganic lead halide perovskite solar cells (PSCs) is approaching the theoretical maximum, the most crucial issue concerns long‐term ambient stability. Here, the application of PCN‐224 quantum dots (QDs) is reported, a typical Zr‐based porphyrinic metal–organic framework (MOF), to enhance the ambient stability of PSCs. PCN‐224 QDs with abundant Lewis‐base groups (e.g., CO, C−N, CN) contribute to high‐quality perovskite films with enlarged grain size and reduced defect density by interaction with under‐coordinated Pb2+. Meanwhile, PCN‐224 QDs enable the well‐matched energy level at the perovskite/hole transport layer (HTL) interface, thereby facilitating hole extraction and transport. More importantly, PCN‐224 QDs‐treated HTL can capture Li+ from bis(trifluoromethanesulfonyl)imide additive, leading to the reduced aggregation and less direct contact with moisture for hygroscopic Li‐TFSI. Moreover, PCN‐224 QDs mitigated Li+ ion migration into the perovskite layer, thus avoiding the formation of deleterious defects. The resultant devices yield a champion PCE of 22.51%, along with substantially improved durability, including humidity, thermal and light soaking stabilities. The findings provide a new approach toward efficient and stable PSCs by applying MOF QDs. [ABSTRACT FROM AUTHOR]

As the power‐conversion efficiency (PCE) of organic–inorganic lead halide perovskite solar cells (PSCs) is approaching the theoretical maximum, the most crucial issue concerns long‐term ambient stability. Here, the application of PCN‐224 quantum dots (QDs) is reported, a typical Zr‐based porphyrinic metal–organic framework (MOF), to enhance the ambient stability of PSCs. PCN‐224 QDs with abundant Lewis‐base groups (e.g., CO, C−N, CN) contribute to high‐quality perovskite films with enlarged grain size and reduced defect density by interaction with under‐coordinated Pb2+. Meanwhile, PCN‐224 QDs enable the well‐matched energy level at the perovskite/hole transport layer (HTL) interface, thereby facilitating hole extraction and transport. More importantly, PCN‐224 QDs‐treated HTL can capture Li+ from bis(trifluoromethanesulfonyl)imide additive, leading to the reduced aggregation and less direct contact with moisture for hygroscopic Li‐TFSI. Moreover, PCN‐224 QDs mitigated Li+ ion migration into the perovskite layer, thus avoiding the formation of deleterious defects. The resultant devices yield a champion PCE of 22.51%, along with substantially improved durability, including humidity, thermal and light soaking stabilities. The findings provide a new approach toward efficient and stable PSCs by applying MOF QDs. [ABSTRACT FROM AUTHOR]

[Display omitted] • The effect of hydration shells on uranium adsorption kinetics is deeply investigated. • The external diffusion can be facilitated due to fast water exchange. • The increasing temperature would reduce the apparent friction during mass transfer. • The adsorption equilibrium time can be shortened from 32 days down to 18 days. Identifying mass transfer is essential for boosting adsorption kinetics. The internal and external diffusions serve as rate-limiting steps. The liquid film diffusion is commonly identified as external diffusion, while the mass diffusion across the ubiquitous hydration shell is generally ignored. Charged functional groups can bind water molecules strongly via electrostatically induced hydration. Herein, three representative polar polymers, including cation polymer (PDMAPAA), anion polymer (PSS) and zwitterion polymer (PSBMA), are crosslinked with polyamioxime (PAO) to synthesize radially aligned PAO-PDMAPAA, PAO-PSS, PAO-PSBMA, respectively, by a bidirectional freeze-casting. We focus on the effect of hydration structure and hydration dynamics on marine uranium extraction performance. It is found that the external diffusion in PAO-polar polymer adsorbents can be facilitated due to fast water exchange in dynamic hydration shell, leading to a reduced adsorption equilibrium time compared with the pristine PAO. However, the high hydration degree causes strong viscous shear and high dehydration barrier, which impede the complexation of UO 2 2+ with binding sites of PAO. Although the hydration degree follows the order of PAO-PSBMA > PAO-PDMAPAA > PAO-PSS, PAO-PDMAPAA delivers the shortest equilibrium time required. In addition, the increasing temperature would weaken viscous shear in static hydration shell, which equivalently reduces the apparent friction of hydrated uranyl ions. Consequently, light-irradiated GO@PAO-PDMAPAA adsorbent, in which GO acts as a photothermal mediator, yields a shorter equilibrium time (∼18 days) than PAO-PDMAPAA together with a high uranium adsorption capacity of 12.24 mg-U/g-Ads in natural seawater. These findings provide valuable guidance for enhancing uranium adsorption kinetics associated with hydration shell. [ABSTRACT FROM AUTHOR]

With the continuous research and development of amidoxime (AO)‐based adsorbents, industrialization production of uranium from seawater gradually becomes a reality. However, the currently available AO‐based adsorbents still suffer from low adsorption rate and poor selectivity. Herein, vertically aligned polyamioxime–graphene oxide (VA‐PG) sheet membrane is fabricated by directional freeze casting. The run‐through microchannels contribute to the free diffusion of uranyl ions (UO22+), leading to the fast adsorption kinetics. Furthermore, partially reduced graphene oxide allows high photothermal conversion efficiency and rapid in‐plane heat transfer, resulting in the fast temperature rise under simulated sunlight irradiation. Because of the endothermic behavior of UO22+, light‐irradiated VA‐PG can simultaneously satisfy the requirements of high adsorption capacity (13.63 mg‐U g‐Ads−1), high adsorption rate (0.43 mg g−1 day−1), and excellent selectivity toward U(VI) over V(V) (U/V = 1.24) in natural seawater, indicating the right direction for a breakthrough in the field of uranium extraction from seawater. [ABSTRACT FROM AUTHOR]

Marine biofouling is one of the most significant challenges hindering practical uranium extraction from seawater. Single atoms have been widely used in catalytic applications because of their remarkable redox property, implying that the single atom is highly capable of catalyzing the generation of reactive oxygen species (ROS) and acts as an anti‐biofouling substance for controlling biofouling. In this study, the Co single atom loaded polyacrylamidoxime (PAO) material, PAO‐Co, is fabricated based on the binding ability of the amidoxime group to uranyl and cobalt ions. Nitrogen and oxygen atoms from the amidoxime group stabilize the Co single atom. The fabricated PAO‐Co exhibits a broad range of antimicrobial activity against diverse marine microorganisms by producing ROS, with an inhibition rate up to 93.4%. The present study is the first to apply the single atom for controlling biofouling. The adsorbent achieves an ultrahigh uranium adsorption capacity of 9.7 mg g−1 in biofouling‐containing natural seawater, which decreased only by 11% compared with that in biofouling‐removed natural seawater. These findings indicate that applying single atoms would be a promising strategy for designing biofouling‐resistant adsorbents for uranium extraction from seawater. [ABSTRACT FROM AUTHOR]

An adaptive coordination structure is vital for selective uranium extraction from seawater. By strategy of molecular imprinting, uranyl is introduced into a multivariate metal–organic framework (MOF) during the synthesis process to guide the in situ construction of proper nanocage structure for targeting uranyl binding. Except for the coordination between uranium with four oxygen from the materials, the axial oxygen of uranyl also forms hydrogen bonds with hydrogen from the phenolic hydroxyl group, which enhances the binding affinity of the material to uranyl. Attributing to the high binding affinity, the adsorbent shows high uranium binding selectivity to uranyl against not only the interfering metal ions, but also the carbonate group that coordinates with uranyl to form [UO2(CO)3]4− in seawater. In natural seawater, the adsorbent realizes a high uranium adsorption capacity of 7.35 mg g−1, together with an 18.38 times higher selectivity to vanadium. [ABSTRACT FROM AUTHOR]

An adaptive coordination structure is vital for selective uranium extraction from seawater. By strategy of molecular imprinting, uranyl is introduced into a multivariate metal–organic framework (MOF) during the synthesis process to guide the in situ construction of proper nanocage structure for targeting uranyl binding. Except for the coordination between uranium with four oxygen from the materials, the axial oxygen of uranyl also forms hydrogen bonds with hydrogen from the phenolic hydroxyl group, which enhances the binding affinity of the material to uranyl. Attributing to the high binding affinity, the adsorbent shows high uranium binding selectivity to uranyl against not only the interfering metal ions, but also the carbonate group that coordinates with uranyl to form [UO2(CO)3]4− in seawater. In natural seawater, the adsorbent realizes a high uranium adsorption capacity of 7.35 mg g−1, together with an 18.38 times higher selectivity to vanadium. [ABSTRACT FROM AUTHOR]

• Poly(amidoxime)/Polyzwitterionic adsorbent is fabricated for uranium extraction. • The adsorbent can be easily prepared by free-radical polymerization. • The adsorbent shows high salt shrinkage resistance. • The adsorbent exhibits excellent antibacterial activity. • A high uranium extraction capacity of 6.26 mg g−1 in natural seawater. Effective uranium extraction from seawater can contribute greatly for meeting the needs of low carbon energy. Extensive studies have been conducted on polyamidoxime-based (PAO-based) adsorbents for their exceptional uranium adsorption capabilities. However, the salt-shrinkage effect severely hinders the extraction of uranium from seawater using traditional PAO-based adsorbents. This study synthesizes a novel semi-interpenetrating polymer network hydrogel, designated as PAO/PMPC-SH, using a free-radical polymerization approach utilizing PAO and zwitterionic poly (2-methacryloyloxyethyl phosphorylcholine) (PMPC). The incorporation of the PMPC component endows the adsorbent with exceptional resistance to salt shrinkage owing to the antipolyelectrolyte effect. This characteristic facilitates the diffusion of uranyl ions within PAO/PMPC-SH, even in a high-salt environment with a salt concentration as high as 25 wt%, thereby exposing the uranium binding sites in the adsorbent. Moreover, PAO/PMPC-SH exhibits exceptional antibacterial activity. After 28 days of test in natural seawater, PAO/PMPC-SH demonstrates a high uranium extraction capacity of 6.26 mg g−1, representing only a 9.14 % decrease compared with the capacity of adsorbing in marine microorganism-removed natural seawater. Overall, the notable performance of PAO/PMPC-SH in uranium extraction highlights its potential as a highly effective adsorbent for uranium extraction from seawater. [ABSTRACT FROM AUTHOR]

The extraction of uranium from seawater, which is an abundant resource, has attracted considerable attention as a viable form of energy‐resource acquisition. The two critical factors for boosting the chemical thermodynamics of uranium extraction from seawater are the availability of sufficient amounts of uranyl ions for supply to adsorbents and increased interaction temperatures. However, current approaches only rely on the free diffusion of uranyl ions from seawater to the functional groups within adsorbents, which largely limits the uranium extraction capacity. Herein, inspired by the mechanism of plant transpiration, a plant‐mimetic directional‐channel poly(amidoxime) (DC‐PAO) hydrogel is designed to enhance the uranium extraction efficiency via the active pumping of uranyl ions into the adsorbent. Compared with the original PAO hydrogel without plant‐mimetic transpiration, the uranium extraction capacity of the DC‐PAO hydrogel increases by 79.33% in natural seawater and affords the fastest reported uranium extraction average rate of 0.917 mg g−1 d−1 among the most state‐of‐the‐art amidoxime group‐based adsorbents, along with a high adsorption capacity of 6.42 mg g−1 within 7 d. The results indicate that the proposed method can enhance the efficiency of solar‐transpiration‐based uranium extraction from seawater, particularly in terms of reducing costs and saving processing time. [ABSTRACT FROM AUTHOR]

Despite scandium tantalite (ScTaO 4) has great potential application for thermal/environmental barrier coating system, it is necessary to reduce the thermal expansion coefficient difference between them to lower the thermal stress in practical applications. In this paper, (ZrO 2) x -(ScTaO 4) 1-x (x = 0.1, 0.2) material was prepared by doping ZrO 2 into scandium tantalite ceramics, and its thermal expansion coefficient and calcium–magnesium–alumino-silicate (CMAS) corrosion behavior were studied. After the CMAS corrosion experiments of (ZrO 2) x -(ScTaO 4) 1-x material, the phase composition and microstructures of samples were detected by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) analysis. The main results show that the alloying effect of ZrO 2 doping can reduce the thermal expansion coefficient of ScTaO 4 and then alleviate the thermal expansion coefficient difference in thermal/environmental barrier coating system. Besides, Zr4+ ions are separated from (ZrO 2) x -(ScTaO 4) 1-x lattice by molten CMAS under high-temperature corrosion condition and (ZrO 2) x -(ScTaO 4) 1-x material is decomposed into ScTaO 4 and t -ZrO 2 finally. In addition, only t -ZrO 2 is defected in the corrosion products without other crystal type of ZrO 2 in the XRD results of the corrosion products, which indicate that ScTaO 4 can increase high-temperature phase stability of t -ZrO 2 and prevent phase transformation from t -ZrO 2 to m -ZrO 2. • ZrO 2 doping can reduce the thermal expansion coefficient of ScTaO 4 ceramics. • The corrosion experiment temperature is much higher than the limited temperature capability of conventional YSZ (1200 °C). • The Zr4+ ions are induced to dissociate from the crystal lattice of ScTaO 4 by molten CMAS. • After contacting the molten CMAS, (ZrO 2) x -(ScTaO 4) 1-x material is decomposed into ScTaO 4 and t -ZrO 2. • In the (ZrO 2) x -(ScTaO 4) 1-x material, ScTaO 4 can increase high-temperature phase stability of t -ZrO 2 to a certain extent. [ABSTRACT FROM AUTHOR]

UiO‐66‐NH2/black phosphorus quantum dots (MOF/BPQDs) heterojunctions are anchored on the carboxyl cellulose nanofiber (CNF) aerogel with high porosity (>98%) to fabricate high‐efficiency uranium adsorbents (BP@CNF‐MOF). CNF aerogels possess abundant carboxyl groups, which can serve as nucleation centers to in situ synthesize UiO‐66‐NH2 with smaller crystal size, high mass loading, and good adhesion. BP@CNF‐MOF demonstrates good mechanical flexibility and minimal MOF loss from the CNF aerogel, both of which result from the mutual physical interactions and entanglements of CNFs as well as strong binding interactions between MOF crystals and CNF aerogel. Owing to the excellent heterogeneous photocatalytic activity of MOF/BPQDs, on one hand, marine bacteria can be effectively destroyed by reactive oxygen species (ROS). On the other hand, the photocatalytic U(VI) reduction to insoluble U(IV) could be facilitated, thereby allowing more binding sites on the MOF crystals for further U(VI) adsorption. Consequently, compared with dark conditions, the adsorption efficiency of the light irradiated BP@CNF‐MOF increases by 55.3%, reaching up to 6.77 mg‐U per g‐Ads after 6 weeks of exposure to natural seawater. The intrinsic instability of BPQDs can be overcome by MOF coating layer simultaneously. The strategy applied in this work could also be applicable to other superior MOF crystals. [ABSTRACT FROM AUTHOR]

[Display omitted] • A morph-genetic biomimetic concept for fabricating zwitterionic hydrogels was proposed. • Macro-porous structures inside CTDPH matrix avoid the formation of salt crystallization. • The seawater evaporating rate of CTDPH increases to 3.11 kg m-2h−1 under 1-sun irradiation. • The CTDPH maintains 91.6% of its original solar evaporation rate even after 10 cycles. Huge seawater resources are of utmost importance in addressing the increasing and severe water shortage worldwide. However, high-efficiently and sustainably extracting fresh water from seawater through solar evaporation remains a challenging task. Herein, we propose a novel approach based on the morph-genetic biomimetic concept, utilizing a cuttlebone-templated directional porous hydrogel (CTDPH). By etching away the cuttlebone (CaCO 3) in the hydrogel network, we have developed a zwitterionic material that exhibits high-efficiency photo-thermal conversion, resistance to salt deposition, and super hydrophilicity, enabling high-efficiency solar evaporation. The resultant CTDPH demonstrates a high level of photo-thermal conversion efficiency, thanks to the incorporation of MXene (Ti 3 C 2 T x) 2D nanosheets. By introducing polyzwitterions into the hydrogel matrix, the CTDPH achieves superhydrophilicity, greatly enhancing the transport of seawater. More importantly, the CTDPH possesses a penetrating oriented macro-porous structure, enabling rapid seawater transportation while effectively preventing salt crystallization. This prevents salt deposition on the surface of the hydrogel even during continuous 12-hour 1.0 sun irradiation. As a result, compared with the MXene-free gels and cuttlebone-reserved gels, this CTDPH can largely increase the seawater evaporating rate from 0.73 or 1.75 to 3.11 kg m-2h−1 under 1.0 sun irradiation. Furthermore, even after undergoing 10 cycles of seawater evaporation, the CTDPH still maintains 91.6% of its original solar evaporation rate (2.85 kg m-2h−1). The CTDPH emerges as a promising contender, offering both high efficiency and sustainability for solar evaporation from seawater, while simultaneously paving the way for innovative approaches to explore other materials and systems in the realm of solar evaporation. [ABSTRACT FROM AUTHOR]