Search

Patients with comorbid asthma-obesity experience greater disease severity and are less responsive to therapy. We have previously reported adipose tissue within the airway wall that positively correlated with body mass index. Accumulation of biologically active adipose tissue may result in the local release of adipokines and disrupt large and small airway function depending on its anatomical distribution. This study therefore characterized airway-associated adipose tissue distribution, lipid composition, and adipokine activity in a porcine model. Airway segments were systematically dissected from different locations of the bronchial tree in inflation-fixed lungs. Cryosections were stained with hematoxylin and eosin (H&E) for airway morphology, oil red O to distinguish adipose tissue, and Nile blue A for lipid subtype delineation. Excised airway-associated adipose tissue was cultured for 72 h to quantify adipokine release using immunoassays. Results showed that airway-associated adipose tissue extended throughout the bronchial tree and occupied an area proportionally similar to airway smooth muscle within the wall area. Lipid composition consisted of pure neutral lipids (61.7 ± 3.5%), a mixture of neutral and acidic lipids (36.3 ± 3.4%), or pure acidic lipids (2.0 ± 0.8%). Following tissue culture, there was rapid release of IFN-γ, IL-1β, and TNF-α at 12 h. Maximum IL-4 and IL-10 release was at 24 and 48 h, and peak leptin release occurred between 48 and 72 h. These data extend previous findings and demonstrate that airway-associated adipose tissue is prevalent and biologically active within the bronchial tree, providing a local source of adipokines that may be a contributing factor in airway disease.

Mechanical stress and the stiffness of the extracellular matrix are key drivers of tissue development and homeostasis. Aberrant mechanosensation is associated with a wide range of pathologies, including osteoarthritis. Matrix (or substrate) stiffness plays a major role in cell spreading, adhesion, proliferation, and differentiation. However, how specific cells sense substrate stiffness still remains unclear. The primary cilium is an essential cellular organelle that senses and integrates mechanical and chemical signals from the extracellular environment. We hypothesized that the primary cilium dynamically alters its length and position to fine-tune cell mechanosignaling based on substrate stiffness alone. We used a hydrogel system of varying substrate stiffness to examine the role of stiffness on cilia frequency, length, and centriole position as well as cell and nuclei area over time. Contrary to other cell types, we show that chondrocyte primary cilia shorten on softer substrates, demonstrating tissue-specific mechanosensing that is aligned with the tissue stiffness the cells originate from. We further show that stiffness determines centriole positioning to either the basal or apical membrane during attachment and spreading, with centrioles positioned toward the basal membrane on stiffer substrates. These phenomena are mediated by force generation actin-myosin stress fibers in a time-dependent manner. Finally, we show on stiff substrates that primary cilia are involved in tension-mediated cell spreading. We propose that substrate stiffness plays a role in cilia positioning, regulating cellular responses to external forces, and maybe a key driver of mechanosignaling-associated diseases.

Background Fibroblasts found in keloid tissues are known to present an altered sensitivity to microenvironmental stimuli. However, the impact of changes in extracellular matrix stiffness on phenotypes of normal fibroblasts (NFs) and keloid fibroblasts (KFs) is poorly understood. Objectives Investigation the impact of matrix stiffness on NFs and KFs mainly via detecting yes-associated protein (YAP) expression. Methods We used fibronectin-coated polyacrylamide hydrogel substrates with a range from physiological to pathological stiffness values with or without TGF-β (fibrogenic inducer). Atomic force microscopy was used to measure the stiffness of fibroblasts. Cellular mechanoresponses were screened by immunocytochemistry, Western blot and Luminex assay. Results KFs are stiffer than NFs with greater expression of α-SMA. In NFs, YAP nuclear translocation was induced by increasing matrix stiffness as well as by stimulation with TGF-β. In contrast, KFs showed higher baseline levels of nuclear YAP that was not responsive to matrix stiffness or TGF-β. TGF-β1 induced p-SMAD3 in both KFs and NFs, demonstrating the pathway was functional and not hyperactivated in KFs. Moreover, blebbistatin suppressed α-SMA expression and cellular stiffness in KFs, linking the elevated YAP signaling to keloid phenotype. Conclusions These data suggest that whilst normal skin fibroblasts respond to matrix stiffness in vitro, keloid fibroblasts have elevated activation of mechanotransduction signaling insensitive to the microenvironment. This elevated signaling appears linked to the expression of α-SMA, suggesting a direct link to disease pathogenesis. These findings suggest changes to keloid fibroblast phenotype related to mechanotransduction contribute to disease and may be a useful therapeutic target.

High-risk neuroblastoma patients have poor survival rates and require better therapeutic options. High expression of a multifunctional DNA and RNA-binding protein, NONO, in neuroblastoma is associated with poor patient outcome; however, there is little understanding of the mechanism of NONO-dependent oncogenic gene regulatory activity in neuroblastoma. Here, we used cell imaging, biochemical and genome-wide molecular analysis to reveal complex NONO-dependent regulation of gene expression. NONO forms RNA- and DNA-tethered condensates throughout the nucleus and undergoes phase separation in vitro, modulated by nucleic acid binding. CLIP analyses show that NONO mainly binds to the 5' end of pre-mRNAs and modulates pre-mRNA processing, dependent on its RNA-binding activity. NONO regulates super-enhancer-associated genes, including HAND2 and GATA2. Abrogating NONO RNA binding, or phase separation activity, results in decreased expression of HAND2 and GATA2. Thus, future development of agents that target RNA-binding activity of NONO may have therapeutic potential in this cancer context.

Present understandings of cardiomyocyte mechanobiology have primarily been developed using 2-dimensional, monocellular cell cultures, however the emergence of 3-dimensional (3D) multicellular cardiac constructs has enabled us to develop more sophisticated recapitulations of the cardiac microenvironment. Several of these strategies have illustrated that incorporating elements of the extracellular matrix (ECM) can promote greater maturation and enhance desirable cardiac functions, such as contractility, but the responses of these cardiac constructs to biophysically aberrant conditions, such as in the post-infarct heart, has remained relatively unexplored. In our study, we employ a stiffness gradient gelatin methacryloyl (GelMA) hydrogel platform to unpack the mechanobiology of cardiac spheroids. We encapsulated neonatal rat cardiac cell spheroids in a 4.4-18.7 kPa linear stiffness gradient up to 120 h. We found the proportion of viable cells within the spheroids increased over time, but the cell number per spheroid decreased. Spheroids expand more in softer matrices while stiffer matrices promote larger nuclei without changing nuclei shape. Volume expansion came primarily from cells expressing vimentin. We did not observe any correlations between stiffness and mechanomarker expression, however we found that after 120 h post-encapsulation, the localization of YAP, the localization of MRTF-A and the expression of Lamin-A was correlated with spheroid morphology. The same trends were not observed 24 h post-encapsulation, indicating that volume adaptation can take a relatively long time. Our data demonstrates that cardiac spheroids are mechanosensitive and that their capacity to respond to ECM-based cues depends on their capacity to adapt their volume with a 3D microenvironment.

We present a series of synthetic polymer hydrogels which break the traditional correlation between pore size and mechanical properties. The hydrogels are prepared from a dendronised polymer architecture based on a methacrylate copolymer to which poly(amido amine) dendrons are attached. Our approach will be useful in tailoring hydrogels for tissue engineering, controlled drug release, and flexible electronics.

Three-dimensional (3D) bioprinting has attracted considerable attention for producing 3D engineered cellular microenvironments that replicate complex and sophisticated native extracellular matrices (ECM) as well as the spatiotemporal gradients of numerous physicochemical and biological cues. Although various hydrogel-based bioinks have been reported, the development of advanced bioink materials that can reproduce the complexity of ECM accurately and mimic the intrinsic property of laden cells is still a challenge. This paper reports 3D printable bioinks composed of phenol-rich gelatin (GHPA) and graphene oxide (GO) as a component for a myogenesis-inducing material, which can form a hydrogel network in situ by a dual enzyme-mediated cross-linking reaction. The in situ curable GO/GHPA hydrogel can be utilized successfully as 3D-printable bioinks to provide suitable cellular microenvironments with facilitated myogenic differentiation of C2C12 skeletal myoblasts. Overall, we suggest that functional bioinks may be useful in muscle tissue engineering and regenerative medicine.

Cancer progression is influenced by changes in the tumor microenvironment, such as the stiffening of the extracellular matrix. Yet our understanding of how cancer cells sense and convert mechanical stimuli into biochemical signals and physiological responses is still limited. The long noncoding RNA nuclear paraspeckle assembly transcript 1 (NEAT1), which forms the backbone of subnuclear “paraspeckle” bodies, has been identified as a key genetic regulator in numerous cancers. Here, we investigated whether paraspeckles, as defined by NEAT1 localization, are mechanosensitive. Using tunable polyacrylamide hydrogels of extreme stiffnesses, we measured paraspeckle parameters in several cancer cell lines and observed an increase in paraspeckles in cells cultured on soft (3 kPa) hydrogels compared with stiffer (40 kPa) hydrogels. This response to soft substrate is erased when cells are first conditioned on stiff substrate, and then transferred onto soft hydrogels, suggestive of mechanomemory upstream of paraspeckle regulation. We also examined some well-characterized mechanosensitive markers, but found that lamin A expression, as well as YAP and MRTF-A nuclear translocation did not show consistent trends between stiffnesses, despite all cell types having increased migration, nuclear, and cell area on stiffer hydrogels. We thus propose that paraspeckles may prove of use as mechanosensors in cancer mechanobiology.

High-risk neuroblastoma patients have poor survival rates and require better therapeutic options. High expression of a multifunctional DNA and RNA binding protein, NONO, in neuroblastoma is associated with poor patient outcome, however there is little understanding of the mechanism of NONO-dependent oncogenic gene regulatory activity in neuroblastoma. Here, we used cell imaging, biophysical and molecular analysis to reveal complex NONO-dependent regulation of gene expression, finding that NONO forms RNA- and DNA-tethered phase-separated condensates throughout the nucleus. CLIP analyses show that NONO mainly binds to the 5’ end of pre-mRNAs and modulates pre-mRNA processing, dependent on its RNA binding activity. NONO preferentially regulates super enhancer-associated genes, including HAND2 and GATA2. In the absence of functional NONO-RNA condensates, inefficient pre-mRNA processing at these loci leads to decreased expression of HAND2 and GATA2. Thus, future development of agents that target RNA binding activity of NONO may have therapeutic potential in this cancer context.

Owing to astonishing properties such as the large surface area to volume ratio, mechanical stability, antimicrobial property, and collagen crosslinking, graphene family nanomaterials (GFNs) have been widely used in various biomedical applications including tissue regeneration. Many review literatures are available to compile the role of GFNs in cardiac, bone, and neuronal tissue regeneration. However, the contribution of GFNs in skin wound healing and tissue regeneration was not yet discussed. In the present review, we have highlighted the properties of GFNs and their application in skin wound healing. In addition, we have included challenges and future directions of GFNs in skin tissue regeneration in the portion of conclusion and perspectives.

Extracellular matrix (ECM) remodeling is a major facet of cardiac development and disease, yet our understanding of cardiomyocyte mechanotransduction remains limited. To enhance our understanding of cardiomyocyte mechanosensation, we studied stiffness-driven changes to cell morphology and mechanomarker expression in H9C2 cells and neonatal rat cardiomyocytes (NRCMs). Linear stiffness gradient polyacrylamide hydrogels (2-33 kPa) coated with ECM proteins including Collagen I (Col), Fibronectin (Fn) or Laminin (Ln) were used to represent necrotic, healthy, and infarcted cardiac tissue on a continuous stiffness gradient. Cell size, cell shape and nuclear size were found to be mechanosensitive in H9C2 cells, as was the expression or nuclear translocalization of the mechanomarkers Lamin-A, YAP, and MRTF-A. Minor differences were observed between the different ECM coatings, with the same overarching stiffness-dependent trends being observed across Col, Fn and Ln coated hydrogels. Inhibition of mechanotransduction in H9C2 cells using blebbistatin or Y27632 resulted in disruptions to cell shape, nuclear shape, and nuclear size, however, trends in cell size and mechanomarker expression were not significantly attenuated. Mechanosensation in NRCMs was much less marked, with no significant changes in cell morphology being detected, although YAP did become increasingly nuclear localized with increasing stiffness. In α-actinin positive cells, striations formed with regular structure and frequency at all stiffnesses for Col and Fn coated hydrogels, but not Ln coated gels. In this study, we used our stiffness gradient hydrogels to comprehensively map the relationship between ECM stiffness and cardiac cell phenotype and found that less mature H9C2 cardiac cells are more sensitive to ECM changes than the more developed neonatal cardiomyocytes.

Skeletal muscle function is governed by both the mechanical and structural properties of its constituent tissues, which are both modified by disease. Characterizing the mechanical properties of skeletal muscle tissue at an intermediate scale, i.e., between that of cells and organs, can provide insight into diseases such as muscular dystrophies. In this study, we use quantitative micro-elastography (QME) to characterize the micro-scale elasticity of ex vivo murine skeletal muscle in three-dimensions in whole muscles. To address the challenge of achieving high QME image quality with samples featuring uneven surfaces and geometry, we encapsulate the muscles in transparent hydrogels with flat surfaces. Using this method, we study aging and disease in quadriceps tissue by comparing normal wild-type (C57BL/6J) mice with dysferlin-deficient BLAJ mice, a model for the muscular dystrophy dysferlinopathy, at 3, 10, and 24 months of age (sample size of three per group). We observe a 77% decrease in elasticity at 24 months in dysferlin-deficient quadriceps compared to wild-type quadriceps.

Mechanical stress and the stiffness of the extracellular matrix are key drivers of tissue development and homeostasis. Aberrant mechanosensation is associated with a wide range of pathologies, including diseases such as osteoarthritis. Substrate stiffness is one of the well-known mechanical properties of the matrix that enabled establishing the central dogma of an integrin-mediated mechanotransduction using stem cells. However, how specific cells ‘feel’ or sense substrate stiffness requires further study. The primary cilium is an essential cellular organelle that senses and integrates mechanical and chemical signals from the extracellular environment. We hypothesised that the primary cilium dynamically alters its length and position to fine-tune cell mechanosignalling based on substrate stiffness alone. We used a hydrogel system of varying substrate stiffness to examine the role of substrate stiffness on cilia frequency, length and centriole position as well as cell and nuclei area over time. Contrary to other cell types, we show that chondrocyte primary cilia shorten on softer substrates demonstrating tissue-specific mechanosensing which is aligned with the tissue stiffness the cells originate from. We further show that stiffness alone determines centriole positioning to either the basal or apical membrane during attachment and spreading, with centriole positioned towards the basal membrane on stiffer substrates. These phenomena are mediated by force generation actin-myosin stress fibres in a time-dependent manner. Based on these findings, we propose that substrate stiffness plays a central role in cilia positioning, regulating cellular response to external forces, and may be a key driver of mechanosignalling-associated diseases.Significance StatementThe primary cilium has been thrust into the limelight owing to its role as a cellular sensor in embryonic development and adult tissue maintenance. How the primary cilium interacts with the mechanical environment still remains unclear. We show that substrate stiffness dynamically regulates primary cilium length and position through integrin-mediated traction forces, the cilia are a key determinant of cell shape on certain stiffnesses. Our data support the promising potential of primary cilia as a novel target in mechanotherapy for improved clinical outcomes in cartilage pathobiology.

Correction for ‘Interrogating cardiac muscle cell mechanobiology on stiffness gradient hydrogels’ by Ian L. Chin et al., Biomater. Sci., 2021, 9, 6795–6806, https://doi.org/10.1039/D1BM01061A.

Stem cell spheroids have been studied extensively in organoid culture and therapeutic transplantation. Herein, hydrogels with an embossed surface (HES) were developed as an all-in-one platform that can enable the rapid formation and culture of a large quantity of size-controllable stem cell spheroids. The embossed structure on the hydrogel was adjustable according to the grit designation of the sandpaper. Human adipose-derived stem cells (hADSCs) were rapidly assembled into spheroids on the hydrogel, with their size distribution precisely controlled from 95 ± 6 μm to 181 ± 15 μm depending on surface roughness. The hADSC spheroids prepared from the HES demonstrated expression of stemness markers and differentiation capacity. In addition, HES-based spheroids showed significantly greater VEGF secretion than spheroids grown on a commercially available low-attachment culture plate. Exploiting those advantages, the HES-based spheroids were used for 3D bioprinting , and the spheroids within the 3D-printed construct showed improved retention and VEGF secretion compared to the same 3D structure containing single cell suspension. Collectively, HES would offer a useful platform for mass fabrication and culture of stem cell spheroids with controlled sizes for a variety of biomedical applications .

The importance of cellular-scale mechanical properties is well-established, yet it is challenging to map subcellular elasticity in three dimensions. We present subcellular mechano-microscopy, an optical coherence microscopy (OCM)-based variant of three-dimensional (3-D) compression optical coherence elastography (OCE) that provides an elasticity system resolution of 5 × 5 × 5 µm: a 7-fold improvement in system resolution over previous OCE studies of cells. The improved resolution is achieved through a ∼5-fold improvement in optical resolution, refinement of the strain estimation algorithm, and demonstration that mechanical deformation of subcellular features provides feature resolution far greater than that demonstrated previously on larger features with diameter >250 µm. We use mechano-microscopy to image adipose-derived stem cells encapsulated in gelatin methacryloyl. We compare our results with compression OCE and demonstrate that mechano-microscopy can provide contrast from subcellular features not visible using OCE.

Determining the trajectories of cells and their lineages or ancestries in live-cell experiments are fundamental to the understanding of how cells behave and divide. This paper proposes novel online algorithms for jointly tracking and resolving lineages of an unknown and time-varying number of cells from time-lapse video data. Our approach involves modeling the cell ensemble as a labeled random finite set with labels representing cell identities and lineages. A spawning model is developed to take into account cell lineages and changes in cell appearance prior to division. We then derive analytic filters to propagate multi-object distributions that contain information on the current cell ensemble including their lineages. We also develop numerical implementations of the resulting multi-object filters. Experiments using simulation, synthetic cell migration video, and real time-lapse sequence, are presented to demonstrate the capability of the solutions.

Pulmonary fibrosis is characterised by excessive scarring in the lung which leads to compromised lung function, serious breathing problems and in some diseases, death. It includes several lung disorders with idiopathic pulmonary fibrosis (IPF) the most common and most severe. Pulmonary fibrosis is considered to be perpetuated by aberrant wound healing which leads to fibroblast accumulation, differentiation and activation, and deposition of excessive amounts of extracellular matrix (ECM) components, in particular, collagen. Recent studies have identified the importance of changes in the composition and structure of lung ECM during the development of pulmonary fibrosis and the interaction between ECM and lung cells. There is strong evidence that increased matrix stiffness induces changes in cell function including proliferation, migration, differentiation and activation. Understanding how changes in the ECM microenvironment influence cell behaviour during fibrogenesis, and the mechanisms regulating these changes, will provide insight for developing new treatments.

Stiffness gradient hydrogels are a useful platform for studying mechanical interactions between cells and their surrounding environments. Here, we developed linear stiffness gradient hydrogels by controlling the polymerization of gelatin methacryloyl (GelMA) via differential UV penetration with a gradient photomask. Based on previous observations, a stiffness gradient GelMA hydrogel was created ranging from ~ 4 to 13 kPa over 15 mm (0.68 kPa/mm), covering the range of physiological tissue stiffness from fat to muscle, thereby allowing us to study stem cell mechanosensation and differentiation. Adipose-derived stem cells on these gradient hydrogels showed no durotaxis, which allowed for the screening of mechanomarker expression without confounding directed migration effects. In terms of morphological markers, the cell aspect ratio showed a clear positive correlation to the underlying substrate stiffness, while no significant correlation was found in cell size, nuclear size, or nuclear aspect ratio. Conversely, expression of mechanomarkers (i.e., Lamin A, YAP, and MRTFa) all showed a highly significant correlation to stiffness, which could be disrupted via inhibition of non-muscle myosin or Rho/ROCK signalling. Furthermore, we showed that cells plated on stiffer regions became stiffer themselves, and that stem cells showed stiffness-dependent differentiation to fat or muscle as has been previously reported in the literature.

Numerous methods have been reported for the fabrication of 3D multi-cellular spheroids and their use in stem cell culture. Current methods typically relying on the self-assembly of trypsinized, suspended stem cells, however, show limitations with respect to cell viability, throughput, and accurate recapitulation of the natural microenvironment. In this study, we developed a new system for engineering cell spheroids by self-assembly of micro-scale monolayer of stem cells. We prepared synthetic hydrogels with the surface of chemically formed micropatterns (squares/circles with width/diameter of 200 μm) on which mesenchymal stem cells isolated from human nasal turbinate tissue (hTMSCs) were selectively attached and formed a monolayer. The hydrogel is capable of thermally controlled expansion. As the temperature was decreased from 37 to 4 °C, the cell layer detached rapidly (10 min) and assembled to form spheroids with consistent size (∼100 μm) and high viability (90%). Spheroidization was significantly delayed and occurred with reduced efficiency on circle patterns compared to square patterns. Multi-physics mapping supported that delamination of the micro-scale monolayer may be affected by stress concentrated at the corners of the square pattern. In contrast, stress was distributed symmetrically along the boundary of the circle pattern. In addition, treatment of the micro-scale monolayer with a ROCK inhibitor significantly retarded spheroidization, highlighting the importance of contraction mediated by actin stress fibers for the stable generation of spheroidal stem cell structures. Spheroids prepared from the assembly of monolayers showed higher expression, both on the mRNA and protein levels, of ECM proteins (fibronectin and laminin) and stemness markers (Oct4, Sox2, and Nanog) compared to spheroids prepared from low-attachment plates, in which trypsinized single cells are assembled. The hTMSC spheroids also presented enhanced expression levels of markers related to tri-lineage (osteogenic, chondrogenic and adipogenic) differentiation. The changes in microcellular environments and functionalities were double-confirmed by using adipose derived mesenchymal stem cells (ADSCs). This spheroid engineering technique may have versatile applications in regenerative medicine for functionally improved 3D culture and therapeutic cell delivery.

Skeletal muscle injuries are extremely common because skeletal muscle is quite frequently used in the human body, and these injuries can cause serious health implications. Currently, grafting and pharmacological therapies are the most common therapeutic methods for treating and repairing the skeletal muscle damages, but both therapeutic methods have significant limitations. Therefore, in recent years, the tissue engineering approaches have attracted much attention in biomedical and bioengineering fields. In particular, up-to-date studies have focused on the novel strategies aimed at promoting and enhancing the regeneration of skeletal muscle tissue by using tissue engineering scaffolds. Although the tissue engineering scaffolds can be readily fabricated with conventional biocompatible materials, such as polymer, ceramic, or metallic materials, the carbon nanomaterials (CNMs) are the most fascinating candidates as a scaffold material due to their favorable biocompatibility and extraordinary physico...

Recent studies have found discordant mechanosensitive outcomes when comparing 2D and 3D, highlighting the need for tools to study mechanotransduction in 3D across a wide spectrum of stiffness. A gelatin methacryloyl (GelMA) hydrogel with a continuous stiffness gradient ranging from 5 to 38 kPa was developed to recapitulate physiological stiffness conditions. Adipose-derived stem cells (ASCs) were encapsulated in this hydrogel, and their morphological characteristics and expression of both mechanosensitive proteins (Lamin A, YAP, and MRTFa) and differentiation markers (PPARγ and RUNX2) were analyzed. Low-stiffness regions (∼8 kPa) permitted increased cellular and nuclear volume and enhanced mechanosensitive protein localization in the nucleus. This trend was reversed in high stiffness regions (∼30 kPa), where decreased cellular and nuclear volumes and reduced mechanosensitive protein nuclear localization were observed. Interestingly, cells in soft regions exhibited enhanced osteogenic RUNX2 expression, while those in stiff regions upregulated the adipogenic regulator PPARγ, suggesting that volume, not substrate stiffness, is sufficient to drive 3D stem cell differentiation. Inhibition of myosin II (Blebbistatin) and ROCK (Y-27632), both key drivers of actomyosin contractility, resulted in reduced cell volume, especially in low-stiffness regions, causing a decorrelation between volume expansion and mechanosensitive protein localization. Constitutively active and inactive forms of the canonical downstream mechanotransduction effector TAZ were stably transfected into ASCs. Activated TAZ resulted in higher cellular volume despite increasing stiffness and a consistent, stiffness-independent translocation of YAP and MRTFa into the nucleus. Thus, volume adaptation as a function of 3D matrix stiffness can control stem cell mechanotransduction and differentiation.

Hypothesis The stiffness has been found to regulate hydrogel performances and applications. However, the key interfacial properties of hydrogels, like friction and adhesion are not controlled by the stiffness, but are altered by the structure and composition of hydrogels, like polymer volume fraction and crosslinking degree. Experiments Colloidal probe atomic force microscopy has been use to investigate the relationship between tribological properties (friction and adhesion) and composition of hydrogels with similar stiffness, but different polymer volume fractions and crosslinking degrees. Findings The interfacial normal and lateral (friction) forces of hydrogels are not directly correlated to the stiffness, but altered by the hydrogel structure and composition. For normal force measurements, the adhesion increases with polymer volume fraction but decreases with crosslinking degree. For lateral force measurements, friction increases with polymer volume fraction, but decreases with crosslinking degree. In the low normal force regime, friction is mainly adhesion-controlled and increases significantly with the adhesion and polymer volume fraction. In the high normal force regime, friction is predominantly load-controlled and shows slow increase with normal force.

3D culture of stem cells can improve therapeutic effects. However, there is limited research on how to deliver cultured stem cell spheroids to the desired target. Here, we developed lotus seedpod-inspired hydrogel (LoSH) containing microwells for culture and delivery of stem cell spheroids. Human adipose-derived stem cells (hADSCs) inside the square microwells (200 or 400 μm in width with various depths) spontaneously formed spheroids with high viability (94.08 ± 1.56%), and fibronectins conjugated to the hydrogel successfully gripped the spheroids, similar to the funiculus gripping seeds in the lotus seedpod. The spheroids slightly bound to the LoSH surface at 37 °C were detached by the expansion of LoSH at lower temperature of 4 °C. After spheroid formation, LoSH was placed on the target substrate upside-down, expanded at 4 °C for 10 min, and removed from the target. As a result, the spheroids within the microwell were successfully transferred to the target substrate with high transfer efficiency (93.78 ± 2.30%). A delivery of spheroids from LoSH to full-thickness murine skin wound with chimney model showed significant enhancement of the number of SMA-positive vessels at day 21 compared to the group received the same number of spheroids by injection. Together, our findings demonstrate LoSH as a one-step platform that can culture and deliver spheroids to a large target area, which will be useful for various biomedical applications.

Mechanobiology—a cell's interaction with its physical environment—can influence a myriad of cellular processes including how cells migrate, differentiate and proliferate. In many diseases, remodeling of the extracellular matrix (ECM) is observed such as tissue stiffening in rigid scar formation after myocardial infarct. Utilizing knowledge of cell mechanobiology in relation to ECM remodeling during pathogenesis, elucidating the role of the ECM in the progression—and perhaps regression—of disease is a primary focus of the field. Although the importance of mechanical signaling in the cardiac cell is well-appreciated, our understanding of how these signals are sensed and transduced by cardiomyocytes is limited. To overcome this limitation, recently developed tools and resources have provided exciting opportunities to further our understandings by better recapitulating pathological spatiotemporal ECM stiffness changes in an in vitro setting. In this review, we provide an overview of a conventional model of mechanotransduction and present understandings of cardiomyocyte mechanobiology, followed by a review of emerging tools and resources that can be used to expand our knowledge of cardiomyocyte mechanobiology toward more clinically relevant applications.

Variations in the mechanical properties of the extracellular environment can alter important aspects of cell function such as proliferation, migration, differentiation and survival. However, many of the techniques available to study these effects lack the ability to characterise cell-to-cell and cell-to-environment interactions on the microscopic scale in three dimensions (3D). Quantitative micro-elastography (QME) is an extension of compression optical coherence elastography that utilizes a compliant layer with known mechanical properties to estimate the axial stress at the tissue surface, which combined with axial strain, is used to map the 3D microscale elasticity of tissue into an image. Despite being based on OCT, limitations in post-processing techniques used to determine axial strain prevented QME to quantify the elasticity of individual cells. In this study we extend the capability of QME to present, to the best of our knowledge, the first images of the elasticity of cells and their environment in 3D over millimeter field-of-views. We improve the accuracy and resolution of QME by incorporating an efficient, iterative solution to the inverse elasticity problem using adjoint elasticity equations to enable QME to visualize individual cells for the first time. We present images of human stem cells embedded in soft gelatin methacryloyl (GelMa) hydrogels and demonstrate these cells elevate the stiffness of the GelMa from 3-kPa to approximately 25-kPa. Our QME system is developed using commercially available components that can be readily made available to biologists, highlighting the potential for QME to emerge as an important tool in the field of mechanobiology.

Funding: Australian Research Council; Cancer Council Western Australia; Industrial Transformation Training Centre; The William and Marlene Schrader Trust of the University of Western Australia. Recent studies in mechanobiology have revealed the importance of cellular and extracellular mechanical properties in regulating cellular function in normal and disease states. Although it is established that cells should be investigated in a three-dimensional (3-D) environment, most techniques available to study mechanical properties on the microscopic scale are unable to do so. In this study, for the first time, we present volumetric images of cellular and extracellular elasticity in 3-D biomaterials using quantitative micro-elastography (QME). We achieve this by developing a novel strain estimation algorithm based on 3-D linear regression to improve QME system resolution. We show that QME can reveal elevated elasticity surrounding human adipose-derived stem cells (ASCs) embedded in soft hydrogels. We observe, for the first time in 3-D, further elevation of extracellular elasticity around ASCs with overexpressed TAZ; a mechanosensitive transcription factor which regulates cell volume. Our results demonstrate that QME has the potential to study the effects of extracellular mechanical properties on cellular functions in a 3-D micro-environment. Publisher PDF

Graphene is a two-dimensional atomic layer of graphite, where carbon atoms are assembled in a honeycombed lattice structure. Recently, graphene family nanomaterials, including pristine graphene, graphene oxide and reduced graphene oxide, have increasingly attracted a great deal of interest from researchers in a variety of science, engineering and industrial fields because of their unique structural and functional features. In particular, extensive studies have been actively conducted in the biomedical and related fields, including multidisciplinary and emerging areas, as their stimulating effects on cell behaviors have been becoming an increasing concern. Herein, we are attempting to summarize some of recent findings in the fields of tissue regeneration concerning the graphene family nanomaterial-functionalized biomimetic scaffolds, and to provide the promising perspectives for the possible applications of graphene family nanomaterial.

The popular reductionist approach towards stem cell differentiation has identified an array of factors that can induce lineage-specific differentiation. Whether these variables direct differentiation in a multivariable setting in the same way as a single-variable setting is a question of interest. Polyacrylamide hydrogels of specific stiffness were microcontact printed with fibronectin in specific shapes and sizes to construct 54 different extracellular matrix types of defined stiffness, shape, and area. Three media types were also used to investigate the effect of both biomechanical and biochemical inducers of differentiation on adipose-derived stem cells. Stiffness was found to be a significant regulator of both adipogenic (3 kPa) and osteogenic (35 kPa) differentiation across all conditions. Biochemically induced osteogenic differentiation occurred as well as increased osteogenesis on larger extracellular matrix areas (above 5,000 μm2 ). The absence of clear trends for all variables demonstrates the atypical expression patterns that arise when variables that may work competitively or synergistically are considered together in a single, high-throughput system.

Graphene is a two-dimensional atomic layer of graphite, where carbon atoms are assembled in a honeycombed lattice structure. Recently, graphene family nanomaterials, including pristine graphene, graphene oxide and reduced graphene oxide, have increasingly attracted a great deal of interest from researchers in a variety of science, engineering and industrial fields because of their unique structural and functional features. In particular, extensive studies have been actively conducted in the biomedical and related fields, including multidisciplinary and emerging areas, as their stimulating effects on cell behaviors have been becoming an increasing concern. Herein, we are attempting to summarize some of recent findings in the fields of tissue regeneration concerning the graphene family nanomaterial-functionalized biomimetic scaffolds, and to provide the promising perspectives for the possible applications of graphene family nanomaterial.