Search

Their unique layered structure, large specific surface area, good stability, high negative charge density between layers, and customizable composition give layered double hydroxides (LDHs) excellent adsorption and detection performance for heavy metal ions (HMIs). However, their easy aggregation and low electrical conductivity limit the practical application of untreated LDHs. In this work, a ternary MgZnFe-LDHs engineered porous biochar (MgZnFe-LDHs/PBC) heterojunction was proposed as a sensing and adsorption material for the effective detection and removal of Cd2+ from wastewater. The growth of MgZnFe-LDHs in the PBC pores not only reduces the accumulation of MgZnFe-LDHs, but also improves the electrical conductivity of the composite. The synergistic effect between MgZnFe-LDHs and PBC enables the composite to achieve a maximum adsorption capacity of up to 293.4 mg/g for Cd2+ in wastewater. Meanwhile, the MgZnFe-LDHs/PBC-based electrochemical sensor shows excellent detection performance for Cd2+, presenting a wide linear range (0.01 ng/L–1 mg/L), low detection limit (3.0 pg/L), good selectivity, and stability. The results indicate that MgZnFe-LDHs/PBC would be a potential material for detecting and removing Cd2+ from wastewater. [ABSTRACT FROM AUTHOR]

Herein, MnMgFe-layered double hydroxides/biochar (MnMgFe-LDHs/BC) composite was fabricated by immobilizing MnMgFe-LDHs on BC via the coprecipitation method, which was employed as an effective material for the detection and removal of Cd2+ from aqueous media. A lamellar structure of MnMgFe-LDHs with abundant surface-hydroxyl groups and various interlayer anions inside present a greater chance of trapping Cd2+. Meanwhile, the conductive BC with a porous structure provides numerous channels for the adsorption of Cd2+. Using the MnMgFe-LDHs/BC-based sensor, Cd2+ can be detected with a low limit of detection down to 0.03 ng/L. The feasibility of detecting Cd2+ in paddy water was also carried out, with satisfactory recoveries ranging from 97.3 to 102.3%. In addition, the MnMgFe-LDHs/BC material as an adsorbent was applied to remove Cd2+ from water with adsorption capacity of 118 mg/g, and the removal efficiency can reach 91%. These results suggest that the as-prepared MnMgFe-LDHs/BC can serve as a favorable platform for efficient determination and removal of Cd2+ in water. [ABSTRACT FROM AUTHOR]

Herein, Ti3C2Tx MXene/N-doped reduced graphene oxide (MXene/N-rGO) composite was employed as the electrocatalyst to construct a new electrochemical sensing platform for the determination of adrenaline (AD). The MXene/N-rGO was synthesized via a facile one-step hydrothermal method, where ethylenediamine acted as a reducing agent and N source. The doped N in rGO served as a bridge between MXene and rGO through tight hydrogen bonds. Scanning electron microscopy showed that large numbers of MXenes with accordion-like morphology were distributed on the surface of the N-rGO. The MXene/N-rGO composite displayed a synergetic catalytic effect for oxidizing AD, originating from the unique catalytic activity of N-rGO and the large surface area and satisfactory conductivity of MXene. These characteristics of composite material led to a remarkable effect on signal amplification for the detection of AD, with a wide linear range from 10.0 nM to 90.0 μM and a low detection limit of 3.0 nM based on a signal to noise ratio of 3. Moreover, the MXene/N-rGO electrode displayed good stability, repeatability, and reproducibility. Additionally, the proposed sensor was successfully applied for voltammetric sensing of AD in urine with recoveries from 97.75% to 103.0%. [ABSTRACT FROM AUTHOR]

In this study, the composite of Prussian blue-carboxylated MWCNTs/ZIF-67 (PB-MWCNTs-COOH/ZIF-67) was synthesized and used as modified electrode material to fabricate an electrochemical sensor for the determination of paracetamol (PAR). In this sensor system, negatively charged MWCNTs-COOH as support for the immobilization of positively charged PB can effectively avoid the agglomeration of PB and enhance the stability, conductivity and catalytic activity of the composite. ZIF-67 particles coating outside PB-MWCNTs-COOH promotes the concentration of PAR. Benefiting from the synergistic effect, the PB-MWCNTs-COOH/ZIF-67 based sensor exhibits significantly improved electrochemical sensing behavior toward the oxidation of PAR. Under the optimum conditions, the PAR sensor presents wide linear ranges of 0.01–70 μM with a low limit of detection of 3.3 nM (S/N = 3). The method also possesses long-term stability, good reproducibility and selectivity, and was employed to the determination of PAR contents in PAR tablets sample. [ABSTRACT FROM AUTHOR]

A multilayer Bi-BTC/reduced graphene oxide (Bi-BTC/rGO) (BTC, 1,3,5-benzenetricarboxylic acid) film electrode was adopted to construct a highly sensitive Pb2+ electrochemical sensor. The multilayer Bi-BTC/rGO films were prepared via alternate cast of Bi-BTC and graphene oxide (GO) on a glassy carbon electrode, followed by electro-reduction of the GO components. Bi-BTC has porous broom-like structure and its organic ligand has abundant functional groups, which are favorable for Pb2+ adsorption and preconcentration. The introduction of rGO layer improves the conductivity of the MOFs material. Moreover, the multilayer composite structure greatly increased the exposure of active sites and the surface area of reactive contact, finally realizing the highly sensitive detection of Pb2+. Pb2+ was determined by differential pulse anodic stripping voltammetry and the response current was recorded at − 0.62 V. The [Bi-BTC/rGO]2 electrode provides a wide linear response ranging from 0.062 to 20.72 μg/L and a low limit of detection (LOD) of 0.021 μg/L (S/N = 3) for Pb2+, which is lower than the guideline value proposed by the World Health Organization. The method has been applied to determine Pb2+ in industrial wastewater with recoveries of 99.2–104% and RSDs of 3.4–4.0% (n = 3). [ABSTRACT FROM AUTHOR]