Search

An innovative strategy for the generation of chondrocytes was thoroughly studied in this paper. Polyetherimide-modified polysaccharides of Porphyra yezoensis (pmPPY) served as a nonviral gene vector and delivered Sox9 plasmid to directly reprogram mouse embryonic fibroblasts into chondrocytes. The gene transfer efficiency was evaluated through ELISA, RT-PCR, and Western blot. The induced chondrocytes were identified through toluidine blue, Safranin O, and the immunostaining. The expression level of collagen II was finally evaluated through western blot. The pSox9/pmPPY nanoparticles (1:50) showed lower cytotoxicity as well as greater gene transfection efficiency than Lipofectamine 2000 and polyetherimide (PEI) (p<0.05). The results of toluidine blue, Safranin O, and the immunostaining of collagen II further showed that the normal MEFs were successfully reprogrammed into chondrocytes. These findings indicate that pmPPY could be a promising gene vector for the generation of chondrocytes via single-gene delivery strategy, which might provide abundant chondrocytes for cartilage repair. [ABSTRACT FROM AUTHOR]

[Display omitted] As the global number of chronic wound patients rises, the financial burden and social pressure on patients increase daily. Stem cells have emerged as promising tissue engineering seed cells due to their enriched sources, multidirectional differentiation ability, and high proliferation rate. However, delivering them in vitro for the treatment of skin injury is still challenging. In addition, bacteria from the wound site and the environment can significantly impact wound healing. In the last decade, 3D bioprinting has dramatically enriched cell delivery systems. The produced scaffolds by this technique can be precisely localized within cells and perform antibacterial actions. In this review, we summarized the 3D bioprinting-based external delivery of stem cells and their antibiosis to improve wound healing. [ABSTRACT FROM AUTHOR]

Background: Previous studies have reported that transplantation of mesenchymal stem cells (MSCs) from many human tissues could ameliorate ovarian dysfunction. However, no study has revealed the therapeutic efficiency of MSCs derived from the chorionic plate (CP-MSCs) for premature ovarian failure (POF). Methods: We investigated the restorative effects of CP-MSCs on cyclophosphamide (CTX)-induced POF. The POF mouse models were established via intraperitoneal injection of 50 mg/kg CTX into female mice for 15 consecutive days. After that, CP-MSCs were intravenously transplanted into the mice once a week for 4 weeks. The serum estradiol (E2) and follicle-stimulating hormone (FSH) levels in the mouse models were detected using enzyme-linked immunosorbent assay (ELISA) before and after treatment. Ovarian function was evaluated through counting the follicles, estrous cycles, and oocytes. Results: CP-MSC transplantation restored the serum hormone level and ovarian function of the mice in the mouse model of POF induced by CTX. The levels of serum E2 and FSH in the POF model group was 232.33 ± 17.16 pg/mL and 4.48 ± 0.29 mIU/mL, respectively, after 6 weeks of treatment, which were similar to the values in the wild-type (WT) group. The superovulation demonstrated that ovarian function was significantly improved compared with nontreated POF model mice. The CP-MSC transplantation could restore CTX-induced ovarian dysfunction. Conclusions: Our results offer a potential application for human CP-MSCs in POF treatment. [ABSTRACT FROM AUTHOR]

Due to the obstruction and heterogeneity of the blood-brain barrier, the clinical treatment of glioma has been extremely difficult. Isoliquiritigenin (ISL) exhibits antitumor effects, but its low solubility and bioavailability limit its application potential. Herein, we established a nanoscale hybrid membrane-derived system composed of erythrocytes and tumor cells. By encapsulating ISL in hybrid membrane nanoparticles, ISL is expected to be enhanced for the targeting and long-circulation in gliomas therapy. We fused erythrocytes with human glioma cells U251 and extracted the fusion membrane via hypotension, termed as hybrid membrane (HM). HM-camouflaged ISL nanoparticles (ISL@HM NPs) were prepared and featured with FT-IR, SEM, TEM, and DLS particle analysis. As the results concluded, the ISL active pharmaceutical ingredients (APIs) were successfully encapsulated with HM membranes, and the NPs loading efficiency was 38.9 ± 2.99% under maximum entrapment efficiency. By comparing the IC50 of free ISL and NPs, we verified that the solubility and antitumor effect of NPs was markedly enhanced. We also investigated the mechanism of the antitumor effect of ISL@HM NPs, which revealed a marked inhibition of tumor cell proliferation and promotion of senescence and apoptosis of tumor cells of the formulation. In addition, the FSC and WB results examined the effects of different concentrations of ISL@HM NPs on tumor cell disruption and apoptotic protein expression. Finally, it can be concluded that hybridized membrane-derived nanoparticles could prominently increase the solubility of insoluble materials (as ISL), and also enhance its targeting and antitumor effect. [ABSTRACT FROM AUTHOR]

The pharmacological activities of liquiritin (LT) are greatly limited by its insolubility and low oral absorption. The purpose of this study was to prepare LT-hydroxypropyl-beta-cyclodextrin inclusion complex (LT-HP-β-CD) to increase water solubility, oral bioavailability and antitumor effect of LT. Herein, saturated aqueous solution method was applied to prepare the LT-HP-β-CD prior to characterization via scanning electron microscope (SEM), infrared radiation (IR) spectroscopy, X-ray diffraction analysis (XRD), and differential scanning calorimetry (DSC). Also, in vitro release and in vivo pharmacokinetics were evaluated. Moreover, the anti-tumor activity of the formulation was investigated in the A549 lung cancer cells. The results of SEM, IR, XRD and DSC showed that LT-HP-β-CD was successfully formulated. In vitro release and oral bioavailability of LT-HP-β-CD compared with the free LT was significantly higher. Successfully, antitumor effect of LT was remarkably enhanced by the preparation of LT-HP-β-CD. Altogether, the LT-HP-β-CD represents a potential carrier for enhancing the water solubility and oral bioavailability of LT coupled with antitumor activity enhancement. [Display omitted] [ABSTRACT FROM AUTHOR]

Recently, bisdemethoxycurcumin (BDMC), a constituent of turmeric, has been studied widely in view of their various therapeutic effects, namely anti-oxidant, anti-cancer, anti-diabetic, and anti-inflammatory. Since ancient times, turmeric has been extensively used as a naturally occurring traditional Chinese medicine (TCM) and as a crucial home remedy for treatment of many health problems such as inflammation and pain. However, the action of anti-gouty arthritis and analgesic activity of its constituents, especially BDMC, have not been scientifically reported yet. Despite the various bioactivities of BDMC, its utilization in clinics has been restricted owing to poor solubility and bioavailability. This research aimed at enhancing oral bioavailability and pharmacokinetic of BDMC via liposome formulation which was modified with d-α-tocopherol polyethylene glycol 1000 succinate (TPGS or vitamin E TPGS) and was characterized using various parameters both in vitro and in vivo. Also, the analgesic and anti-gouty activities of BDMC-loaded TPGS-modified liposomes were investigated by assessing pain threshold and serum uric acid level in potassium oxonate–induced hyperuricemic rats. As the result, BDMC-loaded TPGS-modified liposomes were formulated successfully with optimal physiochemical properties such as 75.98 ± 5.46 nm (particle size), 0.246 ± 0.011 (polydispersity index), − 38.21 ± 0.29 mV (zeta potential), 96.98 ± 0.17 (encapsulation efficiency (EE%)), and 4.84 ± 0.0089 (drug loading capacity (DL%)). Moreover, the oral bioavailability of liposomized BDMC was approximately 10-fold greater than free BDMC in vivo and in vitro cumulative release rates in pH 1.2 (78%) and pH 7 (68%) respectively. This significantly improved the sustaining drug effect of BDMC compared with free form. In addition, BDMC-TPGS liposome acted as a xanthine oxidase inhibitor to evidently reduce uric acid level in potassium oxonate–induced hyperuricemic rats and remarkably increase pain threshold capacity and reaction time in hot plate test at a dose-dependent manner. Altogether, BDMC-conjugated TPGS liposome could act as favorable nanocarriers against gouty arthritis and intense pain with prospect of overcoming the limitation of BDMC application. [ABSTRACT FROM AUTHOR]

Ectomesenchymal stem cells (EMSCs) are typical adult stem cells obtained from the cranial neural crest. They have the potential to differentiate into various cell types, such as osseous cells, neurons and glial cells. Three-dimensional (3 D) printing is a novel method to construct biological structures by rapid prototyping. Previously, our group reported on the stemness and multi-lineage differentiation potential of EMSCs on gels. However, the exploration of EMSCs in 3 D printing and then evaluation of the growth and neuronal differentiation of EMSCs on extruded 3 D printable hybrid hydrogels has not been reported. Therefore, the current study explored the novel hybrid Sodium alginate-Matrigel (SA-MA) hydrogel extruded 3 D printing to design an in vitro scaffold to promote the differentiation and growth of EMSCs. In addition, the physical properties of the hydrogel were characterized and its drug-releasing property determined. Notably, the results showed that the construct exhibited a sustain-released effect of growth factor BDNF in accordance with the Higuchi equation. Moreover, the cell survival rate on the 3 D printed scaffold was 88.22 ± 1.13% with higher neuronal differentiation efficiency compared with 2 D culture. Thus, SA-MA's ability to enhanced EMSCs neuronal differentiation offers a new biomaterial for neurons regeneration in the treatment of spinal cord injury. [ABSTRACT FROM AUTHOR]

Punicic acid of pomegranate oil (PAP) has gained heightened interest due to several health benefits, such as anticarcinogenic, antidiabetic, and antiatherosclerotic properties. However, these bioactivities have been hampered by chemical instability, poor water solubility, rapid metabolism, and low bioavailability of PAP. Therefore, this study was aimed at optimizing the liposomal formulation of Triacylglycerol‐bound punicic acid with its regioisomers (TPAR) for improved oral bioavailability and increased hepatoprotection through antioxidation and anti‐inflammation. Herein, the optimized TPAR nanoliposome (TPAR‐NL) was developed using thin‐film dispersion method and subsequently characterized with appropriate indices. The optimized TPAR‐NL produced fairly stable spherical nanoparticles (˂ 200 nm) with encapsulation efficiency (%EE) of 85.77%, as well as enhanced in vitro release and improved oral bioavailability. The TPAR‐NL exhibited profound antihepatotoxic effect in mice pretreated with carbon tetrachloride (CCl4) via reduction of serum alanine aminotransferase, aspartate aminotransferase, and total bilirubin levels compared with free TPAR. The TPAR‐loaded liposome also significantly reduced oxidative stress by increasing superoxide dismutase and glutathione levels while lowering malonaldehyde concentration compared with the free TPAR. The TPAR‐LNF further exhibited remarkable anti‐inflammatory activity compared with the free drug via inhibition of interleukin‐6 and tumor necrosis factor‐alpha generation. Thus, the developed nanoliposomes potentiated the antihepatotoxic activity of TPAR via antioxidation and anti‐inflammation. [ABSTRACT FROM AUTHOR]

[Display omitted] • The microfluidic chip is simply prepared by the laser cutting machine and assembled in low-cost. • The fabricated bisdemethoxycurcumin thermal liposome based on microfluidic platform, are decomposed under mild local hyperthermia and could be beneficial to enhance the antitumor effect of raw insoluble materials, which could promote the translation of liposome. • Glycyrrhizin was slected as the surfactant to improve the solubility of bisdemethoxycurcumin and effectively increased the drug loading of liposome to 5.46 ± 0.001%. Bisdemethoxycurcumin (BDMC) is the main active ingredient that is isolated from Zingiberaceae plants, wherein it has excellent anti-tumor effects. However, insolubility in water limits its clinical application. Herein, we reported a microfluidic chip device that can load BDMC into the lipid bilayer to form BDMC thermosensitive liposome (BDMC TSL). The natural active ingredient glycyrrhizin was selected as the surfactant to improve solubility of BDMC. Particles of BDMC TSL had small size, homogenous size distribution, and enhanced cultimulative release in vitro. The anti-tumor effect of BDMC TSL on human hepatocellular carcinomas was investigated via 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide method, live/dead staining, and flowcytometry. These results showed that the formulated liposome had a strong cancer cell inhibitory, and presented a dose-dependent inhibitory effect on migration. Further mechanistic studies showed that BDMC TSL combined with mild local hyperthermia could significantly upregulate B cell lymphoma 2 associated X protein levels and decrease B cell lymphoma 2 protein levels, thereby inducing cell apoptosis. The BDMC TSL that was fabricated via microfluidic device were decomposed under mild local hyperthermia, which could beneficially enhance the anti-tumor effect of raw insoluble materials and promote translation of liposome. [ABSTRACT FROM AUTHOR]

[6]-Gingerol, one of the components of the rhizome of Ginger, has a variety of biological activities such as anticoagulant, antioxidative, antitumor, anti-inflammatory, antihypertensive, and so forth. However, as one of the homologous phenolic ketones, [6]-gingerol is insoluble in water which limits its applications. Herein, we prepared [6]-gingerol proliposomes through modified thin-film dispersion method, which was spherical or oval, and physicochemically stable with narrow size distribution. Surprisingly, in vitro release of [6]-gingerol loaded proliposome compared with the free [6]-gingerol was significantly higher and its oral bioavailability increased 5-fold in vivo. Intriguingly, its antitumor effect was enhanced in the liposome formulation. Thus, our prepared [6]-gingerol proliposome proved to be a novel formulation for [6]-gingerol, which significantly improved its antitumor effect. [ABSTRACT FROM AUTHOR]

Generating of induced pluripotent stem cells (iPSCs) can be achieved by ectopic expression of defined transcription factor sets. However, most instances of iPSC induction have been achieved using viral vectors, which carry the risk of unpredictable genetic dysfunction. Here, for the first time, a non-viral vector based on calcium phosphate nanoparticles for the generation of virus-free iPSCs from human umbilical cord mesenchymal stem cells (HUMSCs) via co-delivery of the four plasmids (Oct4, Sox2, Klf4, and c-Myc) is reported. As a result, a total of 98 colonies from 200 000 cells have been obtained, with a reprogramming efficiency of 0.049%. The iPSCs shows positive expression of pluripotency markers, including OCT4, SSEA-3, SSEA-4, NANOG, and TRA-1-81. Moreover, the iPSCs are able to differentiate into all three germ layers in vitro. Subcutaneous injection of the iPSCs into immunocompromised mice results in the formation of teratomas containing a variety of tissues from all three germ layers. These findings indicate that co-delivery of the four Yamanaka factors via plasmid-encapsulated calcium phosphate nanoparticles can provide a simple, safe, and efficient method for the generation of virus-free iPSCs, which is crucial for their future clinical applications in the field of regenerative medicine. [ABSTRACT FROM AUTHOR]