Search

BACKGROUND Clinical implications of the proximal optimisation technique (POT) for bifurcation lesions have not been investigated in a randomised controlled trial. AIMS This study aimed to investigate whether POT is superior in terms of stent apposition compared with the conventional kissing balloon technique (KBT) in real-life bifurcation lesions using optical coherence tomography (OCT). METHODS A total of 120 patients from 15 centres were randomised into two groups - POT followed by side branch dilation or KBT. Finally, 57 and 58 patients in the POT and KBT groups, respectively, were analysed. OCT was performed at baseline, immediately after wire recrossing to the side branch, and at the final procedure. RESULTS The primary endpoint was the rate of malapposed struts assessed by the final OCT. The rate of malapposed struts did not differ between the POT and KBT groups (in-stent proximal site: 10.4% vs 7.7%, p=0.33; bifurcation core: 1.4% vs 1.1%, p=0.67; core's distal edge: 6.2% vs 5.3%, p=0.59). More additional treatments were required among the POT group (40.4% vs 6.9%, p

Purpose We aimed to investigate the effect of the optimal rewiring position identified by three-dimensional optical coherence tomography (3D-OCT) on the side-branch ostium area (SBOA) after single crossover stenting with kissing-balloon inflation (single-stent KBI) for a bifurcation lesion at the follow-up in the left main coronary artery (LMCA) and in non-LMCA bifurcation. Methods Cases of bifurcation lesions with single-stent KBI that included OCT images post-procedure and at the 9-month follow-up were extracted from the 3D-OCT Bifurcation Registry, which is a multicenter-prospective registry of patients with a percutaneous coronary intervention for a bifurcation lesion under OCT guidance. The SBOA was measured by dedicated software, and the rewiring position at the side-branch ostium after crossover stenting was assessed by 3D-OCT. The optimal rewiring was defined as link-free-type and distal rewiring. The relationship between the optimal rewiring and the serial change of the SBOA was investigated separately in LMCA and non-LMCA cases. Results We examined 75 bifurcation lesions (LMCA, n = 35; non-LMCA, n = 40). The serial changes of the SBOA with the optimal rewiring were not significantly different regardless of LMCA and non-LMCA (LMCA:3.96 to 3.73 mm2, p = 0.38; non-LMCA:2.16 to 2.21 mm2, p = 0.98), whereas the serial changes of the SBOA with the sub-optimal rewiring were significantly reduced (LMCA:6.75 to 5.54 mm2, p = 0.013; non-LMCA:2.28 mm2 to 2.09 mm2, p = 0.024). Conclusion The side-branch ostial area dilated with the optimal rewiring position in a bifurcation lesion treated with single crossover stenting and kissing-balloon inflation was preserved regardless of whether the bifurcation was in the LMCA or a non-LMCA.

In this 69-year-old patient, a complex left main quadrifurcation lesion was treated with a stentless procedure, which resulted in sufficient dilation in each branch. Dual-antiplatelet therapy was continued for 3 months, followed by aspirin alone. The stentless treatment with DCB after sufficient plaque debulking with DCA can be useful in avoiding long-term dual antiplatelet therapy especially in patients with high-bleeding risk or those who plan to undergo the non-cardiac operation.

The proximal optimizing technique (POT) -proximal balloon edge dilation (PBED) sequence for side branch (SB) dilatation with cross-over single-stent implantation decreases both strut obstruction at the SB ostium and stent deformation at the main branch (MB).The purpose of this experimental bench test was to assess the impact of stent design on stent deformation, obstruction by stent struts at a jailed SB ostium, and stent strut malapposition in the POT-PBED sequence.Fractal coronary bifurcation bench models (60- and 80-degree angles) were used, and crossover single-stent implantation (3-link stent: XIENCE Sierra, Abbott Vascular, Santa Clara, CA, n = 10; 2-link stent: Synergy, Boston Scientific, Marlborough, MA, n = 10) was performed from the MB using the POT-PBED sequence. Jailing rates at the SB ostium, stent deformation, and stent strut malapposition of the bifurcation segment were assessed using videoscopy and optical coherence tomography.After SB dilatation using the PBED technique, jailing rates at the SB ostium and stent deformation did not differ significantly between the two types of stents. Conversely, the rate of malapposed struts of the bifurcation segment after the PBED procedure was significantly lower with 3-link stents than with 2-link stents for both 60- and 80-degree angles (60-degree angle: 4.3% ± 4.4% versus 22.0% ± 11.1%, P = 0.044; 80-degree angle: 20.8% ± 15.1% versus 57.2% ± 17.0%, P < 0.001, respectively).In the POT-PBED sequence, 3-link stents might be a preferable coronary bifurcation stent, maintaining a jailed SB ostium while significantly reducing stent strut malapposition of the bifurcation segment when compared with 2-link stents.

BACKGROUND The ability of optical coherence tomography (OCT) to identify specific types of stent has never been systematically studied. AIMS The aim of this study was to test the accuracy of OCT imaging to identify patterns of stent platform and subsequently identify the type of stent implanted. METHODS Consecutive patients from six international centres were retrospectively screened, searching for OCT studies with metallic stents or scaffolds. The sample was analysed by two blinded operators, applying a dedicated protocol in four steps to identify the type of stent: 1) 3D and automatic strut detection (ASD), 2) 3D tissue view, 3) longitudinal view with ASD, 4) mode "stent only" and ASD. RESULTS A series of 212 patients underwent OCT in the study centres, finding 294 metallic stents or scaffolds in 146 patients. The protocol correctly identified 285 stents (96.9%, kappa 0.965), with excellent interobserver agreement (kappa 0.988). The performance tended to be better in recently implanted stents (kappa 0.993) than in stents implanted ≥3 months before (kappa 0.915), and in pullback speed 18 mm/s as compared with 36 mm/s (kappa 0.969 vs 0.940, respectively). CONCLUSIONS The type of stent platform can be accurately identified in OCT by trained analysts following a dedicated protocol, combining 3D-OCT, ASD and longitudinal view. This might be clinically helpful in scenarios of device failure and for the quantification of apposition. The blinding of analysts in OCT studies should be revisited.

Left main (LM) coronary artery bifurcation stenting is a challenging topic due to the distinct anatomy and wall structure of LM. In this work, we investigated computationally and experimentally the mechanical performance of a novel everolimus-eluting stent (SYNERGY MEGATRON) purpose-built for interventions to large proximal coronary segments, including LM. MEGATRON stent has been purposefully designed to sustain its structural integrity at higher expansion diameters and to provide optimal lumen coverage. Four patient-specific LM geometries were 3D reconstructed and stented computationally with finite element analysis in a well-validated computational stent simulation platform under different homogeneous and heterogeneous plaque conditions. Four different everolimus-eluting stent designs (9-peak prototype MEGATRON, 10-peak prototype MEGATRON, 12-peak MEGATRON, and SYNERGY) were deployed computationally in all bifurcation geometries at three different diameters (i.e., 3.5, 4.5, and 5.0 mm). The stent designs were also expanded experimentally from 3.5 to 5.0 mm (blind analysis). Stent morphometric and biomechanical indices were calculated in the computational and experimental studies. In the computational studies the 12-peak MEGATRON exhibited significantly greater expansion, better scaffolding, smaller vessel prolapse, and greater radial strength (expressed as normalized hoop force) than the 9-peak MEGATRON, 10-peak MEGATRON, or SYNERGY (p p

During the coronary bifurcation intervention procedure, imaging including intravascular ultrasound and optical coherence tomography is essential to provide precise anatomy of the lesion and morphological information. This consensus document between the Korean Bifurcation Club and the Japanese Bifurcation Club summarizes practical guidelines and current evidences on lesion assessment, device selection, procedural guidance, and the optimization of bifurcation intervention by the imaging.

A previous autopsy study has revealed that malapposed or protruded struts in the coronary bifurcation were a risk factor for very late stent thrombosis (VLST); however, a live clinical case has not yet been reported due to difficulty in observation at the VLST site. In this case, a 56-year-old male patient underwent a zotarolimus-eluting stent implantation in the proximal left anterior descending artery for acute myocardial infarction 3 years previously and had been treated with dual antiplatelet therapy. The patient experienced chest pain and suddenly collapsed due to acute coronary syndrome caused by a huge thrombus in the left main coronary bifurcation. After insertion of the intra-aortic balloon pump, kissing balloon inflation improved coronary flow and hemodynamics. Two weeks later, a 3-dimensional optical frequency domain imaging (3-D OFDI) revealed uncovered protruded struts on the ostium of the left circumflex artery (LCX). We removed the protruded struts using a double lumen catheter, for which the second wire was advanced to more distal cell along with the first wire located in the same LCX branch. 3-D OFDI clearly demonstrated that uncovered protruded struts at the LCX ostium were the cause of VLST and navigated optimal wiring with a double lumen catheter. Learning objective: Existence of protruded struts at the coronary bifurcated branch ostium is a risk factor for very late stent thrombosis. Three-dimensional optical frequency domain imaging clearly demonstrates the protruded strut configuration at the side branch of ostium and facilitates optimal guide wire re-crossing for kissing balloon inflation. Usage of double lumen catheter increases the possibility of optimal side branch wiring.

Background: Defining the optimal conduction of percutaneous-coronary-intervention (PCI) to treat bifurcation lesions has been the subject of many clinical studies showing that the applied stenting technique may influence clinical outcome. Accordingly, bifurcation stenting classifications and technical sequences should be standardized to allow proper reporting and comparison. Methods: The European Bifurcation Club (EBC) is a multidisciplinary group dedicated to optimize the treatment of bifurcations and previously created a classification of bifurcation stenting techniques that is based on the first stent implantation site. Since some techniques have been abandoned, others have been refined and dedicated devices became available, EBC promoted an international task force aimed at updating the classification of bifurcation stenting techniques as well as at highlighting the best practices for most popular techniques. Original descriptive images obtained by drawings, bench tests and micro-computed-tomographic reconstructions have been created in order to serve as tutorials in both procedure reporting and clinical practice. Results: An updated Main-Across-Distal-Side (MADS)-2, classification of bifurcation stenting techniques has been realized and is reported in the present article allowing standardized procedure reporting in both clinical practice and scientific studies. The EBC-promoted task force deeply discussed, agreed on and described (using original drawings and bench tests) the optimal steps for the following major bifurcation stenting techniques: (a) 1-stent techniques (“provisional” and “inverted provisional”) and (b) 2-stent techniques (“T/TAP,” “culotte,” and “DK-crush”). Conclusions: The present EBC-promoted paper is intended to facilitate technique selection, reporting and performance for PCI on bifurcated lesions during daily clinical practice.

Objective The purpose of this experimental bench test was to compare stent deformation, obstruction of stent struts at a jailed side branch (SB) ostium, and stent strut malapposition between SB inflation using proximal balloon edge dilation (PBED) technique and SB inflation using conventional balloon dilation in repetitive-proximal optimizing technique (re-POT) sequence. Background The second proximal optimizing technique (POT) procedure in the re-POT sequence might increase obstruction of stent struts at a jailed SB ostium, because deformation of stent cells at the main branch (MB) occurred during SB inflation for opening the SB ostium. Methods A fractal coronary bifurcation bench model made of flexible urethane was used, and crossover single-stent implantation (Xience Sierra, Abbott Vascular, Santa Clara, CA, n = 12) was performed from the MB with the re-POT sequence. During the re-POT sequence, the jailing rate at the SB ostium assessed by videoscopy was compared between SB inflation using PBED technique (PBED group, n = 6) and SB inflation using conventional balloon dilation (conventional group, n = 6). Results The jailing rate after the second POT procedure tended to be lower in the PBED group than in the conventional group (26 ± 12% vs. 34 ± 8%, p = .211), and the change in the jailing rate during the second POT procedure was significantly smaller in the PBED group than in the conventional group (4.8 ± 5.3% vs. 11.6 ± 3.5%, p = .026). Conclusions In the re-POT sequence, the PBED technique with a short balloon for SB inflation might minimize worsening of the jailing rate at the SB ostium during the second POT procedure.

The jailing strut configuration with link-free and distal guidewire recrossing (LFD) at the side branch orifice (SBO) reduces incomplete stent apposition (ISA) after kissing balloon technique (KBT) in crossover stenting of coronary bifurcation lesions (CBLs). However, data regarding vascular healing after KBT are lacking. We investigated vascular healing 9 months after crossover stenting followed by KBT with optical coherence tomography (OCT) guidance in a prospective multicenter registry.Fifty-nine patients with CBLs (LFD, 35 patients; non-LFD, 24 patients) were studied. The jailing configuration of the SB and the wire-recrossing position, incidence of ISA and uncovered struts, and neointima unevenness score (NUS) in the main vessel (MV) after 9 months were determined by off-line 3D-OCT in the core laboratory.The ISA rate was significantly higher at the SB ostium and distal MV after KBT in the non-LFD group, compared to the LFD group. After 9 months, incidence of ISA (18.3 ± 18.2 vs. 6.0 ± 8.7%, p 0.01) and uncovered struts (8.7 ± 9.9 vs. 4.7 ± 7.3 %, p = 0.08) were higher at the SB ostium with higher SB restenosis in the non-LFD group. In distal MV, NUS was significantly higher (3.1 ± 1.1 vs. 2.5 ± 0.6, p 0.05). In true-CBLs, an increase in uncovered struts and ISA rate was prominent in the proximal MV and opposite SB. No differences were observed in the 9-month clinical outcomes.Visualization of the wire recrossing point and the SB-jailing strut pattern by OCT plays an important role to optimize the KBT in CBL stenting, resulting in favorable mid-term vascular healing.

We investigated the effect of proximal optimization technique (POT) on coronary bifurcation stent failure (BSF) in cross-over stenting by comparing with the kissing balloon technique (KBT) in a multicenter randomized PROPOT trial.POT is recommended due to increased certainty for optimal stent expansion and side branch (SB) wiring.We randomized 120 patients treated with crossover stenting into the POT group, which was followed by SB dilation (SBD), and the KBT group. Finally, 52 and 57 patients were analyzed by optical coherence tomography before SBD and at the final procedure, respectively. Composite BSF was defined as a maximal malapposition distance of400 μm, or malapposed and SB-jailed strut rates of5.95% and21.4%, respectively.Composite BSF before SBD in the POT and KBT groups was observed in 29% and 26% of patients, respectively. In the POT group, differences in stent volumetric index between the proximal and distal bifurcation (odds ratio [OR] 60.35, 95% confidential interval [CI] 0.13-0.93, p = 0.036) and between the proximal bifurcation and bifurcation core (OR: 3.68, 95% CI: 1.01-13.40, p = 0.048) were identified as independent risk factors. Composite BSF at final in 27% and 32%, and unplanned additional procedures in 38% and 25% were observed, respectively. Composite BSF before SBD was a risk factor for the former (OR: 6.33, 95% CI: 1.10-36.50, p = 0.039) and the latter (OR: 6.43, 95% CI: 1.25-33.10, p = 0.026) in the POT group.POT did not result in a favorable trend in BSF. Insufficient expansion of the bifurcation core after POT was associated with BSF.

Patient-specific and lesion-specific computational simulation of bifurcation stenting is an attractive approach to achieve individualized pre-procedural planning that could improve outcomes. The objectives of this work were to describe and validate a novel platform for fully computational patient-specific coronary bifurcation stenting. Our computational stent simulation platform was trained using n = 4 patient-specific bench bifurcation models (n = 17 simulations), and n = 5 clinical bifurcation cases (training group, n = 23 simulations). The platform was blindly tested in n = 5 clinical bifurcation cases (testing group, n = 29 simulations). A variety of stent platforms and stent techniques with 1- or 2-stents was used. Post-stenting imaging with micro-computed tomography (μCT) for bench group and optical coherence tomography (OCT) for clinical groups were used as reference for the training and testing of computational coronary bifurcation stenting. There was a very high agreement for mean lumen diameter (MLD) between stent simulations and post-stenting μCT in bench cases yielding an overall bias of 0.03 (− 0.28 to 0.34) mm. Similarly, there was a high agreement for MLD between stent simulation and OCT in clinical training group [bias 0.08 (− 0.24 to 0.41) mm], and clinical testing group [bias 0.08 (− 0.29 to 0.46) mm]. Quantitatively and qualitatively stent size and shape in computational stenting was in high agreement with clinical cases, yielding an overall bias of

We reported a case that the insertion of a 48‐mm‐long stent in a calcified coronary lesion after rotational atherectomy led to stent stacking and S‐shaped flection, resulting in longitudinal coronary perforation without stent inflation. Its flexibility and length pose a possible risk of deformation inside the vessel during stent insertion., Insertion of a 48‐mm‐long stent after rotational atherectomy led to stent stacking and S‐shaped flection, resulting in coronary perforation without stent inflation.

Dual antiplatelet therapy (DAPT) with aspirin and P2Y12 inhibitor is administered following percutaneous coronary intervention (PCI) with coronary stent implantation. Several studies have reported the effects of switching between P2Y12 inhibitors on platelet reactivity (P2Y12 reaction units: PRU), from acute to late phase after PCI. However, the effect of switching at very late phase is unknown. This study examined the effect on PRU in Japanese coronary heart disease patients with long-term DAPT (aspirin + clopidogrel) when switching from clopidogrel to prasugrel. Ninety-six patients were enrolled in this study. The median DAPT duration at enrollment was 1824.0 days. Twenty-three patients with PRU ≥ 208 at enrollment were randomly assigned into either continuing to receive clopidogrel (Continued Group; n = 11) or switching to prasugrel (Switched Group; n = 12). The primary endpoint was the rate of patients who achieved PRU P = 0.024). The secondary endpoint was the PRU at week 12 in groups subdivided according to cytochrome P450 (CYP) 2C19 genotypes. At week 12, extensive metabolizers (EM Group) had 202.3 ± 60.0 and 174.5 ± 22.3 in Continued Group and Switched Group (P = 0.591), respectively; intermediate and poor metabolizers (non-EM Group) had 229.4 ± 36.9 and 148.4 ± 48.4 in Continued Group and Switched Group (P = 0.002), respectively. The PRU for non-EM Group was significantly reduced in Switched Group. Thus, for patients with long-term DAPT (aspirin + clopidogrel) after PCI with coronary stent implantation, switching from clopidogrel to prasugrel resulted in a stable reduction in PRU, regardless of CYP2C19 polymorphism.

We sought to investigate the efficacy of the proximal optimization technique (POT) on crossover stenting followed by side branch (SB) dilation under optical coherence tomography guidance in a multicenter registry study. A total of 135 bifurcation lesions in 134 patients were divided into POT (n = 52) and non-POT groups (n = 83). The POT was performed before SB dilatation (pre-POT; n = 26), finally (final-POT; n = 12), at both timing (re-POT; n = 13), and uncertain (n = 1). There were no significant intergroup differences in the success rate of guide wire re-crossing (GWR) into the optimal cell (72% vs. 65%), incidence of the link-free type in the configuration of the SB jailed struts (51% vs. 49%), or incomplete strut apposition at the bifurcation (13 ± 11% vs. 10 ± 9%). However, insufficient stent expansion close to the carina in the proximal main vessel (MV) due to inappropriate POT was likely to induce greater incomplete strut apposition (ISA) around the bifurcation. Only re-POT provided more symmetric proximal MV expansion, while pre- and final-POT did not. The POT did not provide the expected beneficial effects, such as reduction of ISA or more optimal GWR, under the OCT guidance. Wide stent expansion in the proximal MV induced by the POT increased the likelihood of achieving optimal GWR, whereas symmetric stent expansion was provided by re-POT.

Background: Performance of percutaneous coronary intervention (PCI) in side-branch vessels (SB-PCI) has not been fully investigated despite the technical advancement of PCI. Methods: We investigated 257,492 patients registered in the Japanese nationwide PCI registry from January to December 2018; 199,767 (78%) underwent PCI for major vessel PCI (MV-PCI), 21,555 (8.4%) underwent SB-PCI, and 24,862 (9.6%) underwent PCI for both vessels (SB + MV-PCI). The frequencies of primary composite adverse events, defined as in-hospital mortality and procedural complications (i.e., peri-procedural myocardial infarction, tamponade, new-onset cardiogenic shock, stent thrombosis, emergent surgery, and bleeding), and PCI for restenotic lesions were investigated. Their association with institutional frequency of each PCI was also investigated. Results: Fewer drug-eluting stents (66% vs. 86%) and more drug-coated balloons (23% vs. 9%) were used in SB-PCI than in MV-PCI (p

The structural morphology of stents (e.g. expansion, lumen scaffolding, strut apposition, tissue protrusion, side branch jailing, strut fracture), and the local hemodynamic environment after stent deployment in coronary arteries are key determinants of procedural success and subsequent clinical outcomes. High-resolution intracoronary imaging has the potential to enable the geometrically correct 3D reconstruction of coronary stents. The aim of this work was to present a novel algorithm for 3D stent reconstruction of coronary artery stents by OCT and angiography, and test experimentally its accuracy, reproducibility, clinical feasibility and ability to perform CFD studies. Our method has the following steps: 3D lumen reconstruction by OCT and angiography, stent strut segmentation on OCT images, packaging, rotation and straightening of the segmented struts, and planar unrolling of the segmented struts, planar stent wireframe reconstruction, rolling back of the planar stent wireframe to the 3D reconstructed lumen, and stent volume reconstruction. We tested the accuracy and reproducibility of our method in stented patient-specific silicone models using micro computed tomography and stereoscopy as reference. The clinical feasibility and CFD studies were performed in clinically stented coronary bifurcations. Our experimental and clinical studies showed that our proposed algorithm can reproduce the complex stent configuration in space with high precision and reproducibility. Furthermore, our studies showed that the algorithm is feasible in clinical cases with stents deployed in diseased, bifurcated coronary arteries, enabling CFD studies to assess the hemodynamic environment. Notably, the high accuracy of our algorithm was consistent across different stent designs and diameters. Our method coupled with patient-specific CFD studies can facilitate stenting optimization, training in stenting techniques, and stent research and development.

The coronary bifurcation intervention varies among countries due to the differences in assessment of lesion severity and treatment devices. We sought to clarify the difference in basic strategy between South Korea and Japan. A total of 19 and 32 experts from Korean (KBC) and Japanese Bifurcation Clubs (JBC), respectively, answered a survey questionnaire concerning their usual procedure of coronary bifurcation intervention. JBC experts performed less two-stent deployment in the left main (LM) bifurcation compared to KBC experts (JBC vs. KBC: median, 1–10% vs. 21–30%, p p = 0.001) and non-LM bifurcations (30% vs. 5%, p = 0.037). KBC experts more frequently performed proximal optimization technique (POT) in non-LM bifurcation (41–60% vs. 81–99%, p = 0.028) and re-POT in both LM (1–20% vs. 81–99%, p = 0.017) and non-LM bifurcations (1–20% vs. 81–99%, p = 0.0003). JBC experts more frequently performed imaging-guided percutaneous coronary intervention, whereas KBC experts more often used a pressure wire to assess side branch ischemia. JBC experts used a rotablator more aggressively under the guidance of optical coherence tomography. We clarified the difference in the basic strategy of coronary bifurcation intervention between South Korea and Japan for better understanding the trend in each country.

The three-dimensional (3D) representation of the bifurcation anatomy and disease burden is essential for better understanding of the anatomical complexity of bifurcation disease and planning of stenting strategies. We propose a novel methodology for 3D reconstruction of coronary artery bifurcations based on the integration of angiography, which provides the backbone of the bifurcation, with optical coherence tomography (OCT), which provides the vessel shape. Our methodology introduces several technical novelties to tackle the OCT frame misalignment, correct positioning of the OCT frames at the carina, lumen surface reconstruction, and merging of bifurcation lumens. The accuracy and reproducibility of the methodology were tested in n = 5 patient-specific silicone bifurcations compared to contrast-enhanced micro-computed tomography (µCT), which was used as reference. The feasibility and time-efficiency of the method were explored in n = 7 diseased patient bifurcations of varying anatomical complexity. The OCT-based reconstructed bifurcation models were found to have remarkably high agreement compared to the µCT reference models, yielding r2 values between 0.91 and 0.98 for the normalized lumen areas, and mean differences of 0.005 for lumen shape and 0.004 degrees for bifurcation angles. Likewise, the reproducibility of our methodology was remarkably high. Our methodology successfully reconstructed all the patient bifurcations yielding favorable processing times (average lumen reconstruction time

Background Rhythm control before catheter ablation for persistent atrial fibrillation (PeAF) can improve clinical outcomes. We sought to investigate the efficacy of pretreatment with bepridil prior to cryoballoon ablation (CBA) with respect to clinical outcomes in patients with PeAF. Methods We retrospectively analyzed 65 consecutive patients with PeAF who underwent CBA following pretreatment with bepridil hydrochloride (bepridil). Electrical cardioversion was additionally performed in cases involving failure of pharmacological sinus restoration before CBA. The primary endpoint was survival free from atrial tachyarrhythmia at the one-year follow-up, and the secondary endpoints were changes in P-wave morphology and left atrium diameter (LAD) before CBA. Results At the one-year follow-up, 51 patients (78.5%) achieved the primary endpoint (non-recurrence group). Compared to the P-wave duration (Pdur) and dispersion at the time of sinus restoration, they significantly shortened at the time of CBA in the non-recurrence group, while they did not change in the recurrence group. There were no changes in LAD in both groups. Multivariate analysis revealed that refractoriness of bepridil (p = 0.03, odds ratio = 4.72, 95% confidence interval = 1.18–18.92), and longer Pdur at admission for CBA (p = 0.003, odds ratio = 1.08, 95% confidence interval = 1.01–1.14) were independent predictors of recurrence. Conclusions Rhythm control with bepridil induced electrical reverse remodeling; bepridil may improve clinical outcomes after CBA.

Objective To investigate the impact of diabetes mellitus (DM) on provisional coronary bifurcation stenting under the complete guidance of intravascular-ultrasound (IVUS). Background The efficacy of such intervention has not yet been fully elucidated in the DM patients. Methods A total of 100 DM and 139 non-DM patients in a prospective multi-center registry of IVUS-guided bifurcation stenting were compared in angiographic results at 9 months. Vessel and luminal changes during the intervention were analyzed using the IVUS. Vascular healing at the follow-up was also investigated in 23 lesions in each group using optical coherence tomography (OCT). Results No difference was detected regarding baseline reference vessel diameter and minimum lumen diameter in proximal main vessel (MV), distal MV, and side branch (SB). The rate of everolimus-eluting stent use (78.4% vs. 78.3%), final kissing inflation (60.1% vs. 49.0%), and conversion to 2-stent strategy (2.9% vs. 2.8%) were also similar. In the DM group, late loss was greater in proximal MV (DM 0.23 ± 0.29 vs. non-DM 0.16 ± 0.24 mm, P

Objectives The aim of this prospective multicenter study was to identify the optimal approach for simple and fast fractional flow reserve (FFR) computation from radiographic coronary angiography, called quantitative flow ratio (QFR). Background A novel, rapid computation of QFR pullbacks from 3-dimensional quantitative coronary angiography was developed recently. Methods QFR was derived from 3 flow models with: 1) fixed empiric hyperemic flow velocity (fixed-flow QFR [fQFR]); 2) modeled hyperemic flow velocity derived from angiography without drug-induced hyperemia (contrast-flow QFR [cQFR]); and 3) measured hyperemic flow velocity derived from angiography during adenosine-induced hyperemia (adenosine-flow QFR [aQFR]). Pressure wire-derived FFR, measured during maximal hyperemia, served as the reference. Separate independent core laboratories analyzed angiographic images and pressure tracings from 8 centers in 7 countries. Results The QFR and FFR from 84 vessels in 73 patients with intermediate coronary lesions were compared. Mean angiographic percent diameter stenosis (DS%) was 46.1 ± 8.9%; 27 vessels (32%) had FFR ≤ 0.80. Good agreement with FFR was observed for fQFR, cQFR, and aQFR, with mean differences of 0.003 ± 0.068 (p = 0.66), 0.001 ± 0.059 (p = 0.90), and −0.001 ± 0.065 (p = 0.90), respectively. The overall diagnostic accuracy for identifying an FFR of ≤0.80 was 80% (95% confidence interval [CI]: 71% to 89%), 86% (95% CI: 78% to 93%), and 87% (95% CI: 80% to 94%). The area under the receiver-operating characteristic curve was higher for cQFR than fQFR (difference: 0.04; 95% CI: 0.01 to 0.08; p < 0.01), but did not differ significantly between cQFR and aQFR (difference: 0.01; 95% CI: -0.04 to 0.06; p = 0.65). Compared with DS%, both cQFR and aQFR increased the area under the receiver-operating characteristic curve by 0.20 (p < 0.01) and 0.19 (p < 0.01). The positive likelihood ratio was 4.8, 8.4, and 8.9 for fQFR, cQFR, and aQFR, with negative likelihood ratio of 0.4, 0.3, and 0.2, respectively. Conclusions The QFR computation improved the diagnostic accuracy of 3-dimensional quantitative coronary angiography-based identification of stenosis significance. The favorable results of cQFR that does not require pharmacologic hyperemia induction bears the potential of a wider adoption of FFR-based lesion assessment through a reduction in procedure time, risk, and costs.

Patients with ischemic heart disease are administered a dual antiplatelet therapy after percutaneous coronary intervention. This consists of aspirin and thienopyridine, which can be switched from prasugrel to clopidogrel. However, the impact of switching is unknown. This study aimed to determine the efficacy and safety of switching from prasugrel to clopidogrel in Japanese patients. One-hundred and thirty-six patients with acute coronary syndrome scheduled to undergo percutaneous coronary intervention and patients with coronary artery disease requiring elective coronary stenting were enrolled. Patients were randomly assigned into the following groups: prasugrel for 6 weeks at loading/maintenance doses of 20/3.75 mg (Continued Group; n = 68) or prasugrel at 20/3.75 mg for 2 weeks followed by clopidogrel at 75 mg for 4 weeks (Switched Group; n = 68). Aspirin (loading dose/maintenance dose 324/81–100 mg/day) was coadministered in both groups. The primary endpoint was the mean P2Y12 reaction unit (PRU) at week 6 and the secondary endpoint was the PRU in groups subdivided based on the presence of CYP2C19 gene polymorphisms. At week 6, the PRU was significantly lower in the Continued Group relative to the Switched Group (140.7 and 183.0, respectively; P < 0.001), which was also evident after correction with the baseline values (144.1 vs. 176.6, respectively; P = 0.005). Extensive and poor metabolizers in the Switched Group, based on CYP2C19 gene polymorphisms, had significantly higher PRU values than those in the Continued Group. Thus, switching treatments from prasugrel to clopidogrel significantly increased the PRU in patients receiving antiplatelet therapy subsequent to percutaneous coronary intervention.

Background We aimed to clarify the differences in vessel healing after stenting of bifurcation lesions using sirolimus-eluting stents (SESs) or everolimus-eluting stents (EESs). Methods J apanese R egistry Study in Comparison Between Ever olimus-Eluting Stent and S irolimus- E luting Stent for the Bifurcation Lesion (J-REVERSE) is a prospective multicentre registry of 303 bifurcation lesions that were treated with provisional SES or EES with or without final kissing inflation. The first 115 lesions at selected study sites were predefined for inclusion in the optical coherence tomography (OCT) substudy, and 9-month follow-up OCT was conducted in 64 lesions (SES, n = 18; EES, n = 46). In addition to standard OCT parameters, stent eccentricity index (SEI; minimum divided by the maximum stent diameter), neointimal unevenness score (NUS; maximum neointimal thickness in the cross-section [CS] divided by the average neointimal thickness [NIT] of the same CS; uniformity of the neointima suppression) were averaged for each segment (proximal, bifurcation, and distal segments). Results Overall, the average stent and luminal area, NIT, and frequency of uncovered struts were similar. The frequency of malapposed struts and SEI were significantly lower in the EES group than in the SES group. The EES group had a significantly smaller NUS in the proximal and distal segments. Conclusions EESs offer homogeneous vessel healing with less malapposition in the treatment of bifurcation lesions.

AIMS Our aim was to investigate the efficacy of the kissing balloon technique (KBT) in the provisional stenting of bifurcation lesions guided by intravascular ultrasound. METHODS AND RESULTS In the J-REVERSE registry, 300 non-left main bifurcation lesions in 299 patients were divided into two groups, KBT (n=163) and non-KBT (n=137). Patient and lesion characteristics were similar except for a higher prevalence of diabetic patients in the non-KBT group. The major adverse cardiac events (MACE) incidence at nine-month follow-up, including target lesion revascularisation, myocardial infarction, stent thrombosis, and death, was 6.3% in the KBT group versus 9.1% in the non-KBT group (p=0.47). Regardless of more SB dissection (10.5% vs. 1.5%, p=0.001), the KBT group obtained a greater luminal volume in the proximal main vessel (MV) (7.8±2.3 vs. 7.0±2.0 mm3/mm, p=0.006), maintained larger minimal lumen diameter at follow-up (2.73±0.43 vs. 2.63±0.39 mm, p=0.04), and demonstrated less binary side branch (SB) restenosis (9.7% vs. 21.0%, p=0.0004), which was beneficial for both true and non-true bifurcation lesions. Multivariate analysis showed the efficacy of KBT on SB restenosis (OR 0.28, 95% CI: 0.12-0.62, p=0.002). CONCLUSIONS Although the KBT increased SB dissection, it provided greater luminal gain in the proximal MV and SB with a similar MACE rate to non-KBT treatment up to nine-month follow-up.

Objectives To investigate the mechanisms of residual stenosis (RS) at side branch ostium (SBO) after final kissing balloon inflation (FKI) and clarify the impact of carina- and plaque-shifts on RS. Background Carina- and plaque-shift induce SBO compromise. FKI is an effective technique to treat this complication; however, RS often persist, and are associated with restenosis at SBO. Methods We performed serial volumetric analysis of 91 bifurcations in which crossover-stenting with FKI and pre-/post-intravascular ultrasounds (IVUS) were completed in both branches. The plaque- and carina-shifts were defined as an increase in the plaque-volume and a decrease in the vessel-volume at the SBO, respectively. RS at the SBO, defined as area stenosis >50% on IVUS, was identified in 19 lesions. Results After FKI, the plaque volume- significantly increased at the SBO, with its reduction in the proximal main vessel (MV). However, at the SBO, the volumetric lumen change correlated with vessel change (ρ = 0.690, P

The advantage of final kissing balloon technique (FKI) after 1-stenting is still under debate. We reported in 3-dimensional optical coherence (3D-OCT) bifurcation registry that the condition of “stent-link free on carina and guidewire re-crossing into the distal cell (LFD)” led to a smaller

Treatment of coronary bifurcation lesions remains an ongoing challenge for interventional cardiologists. Stenting of coronary bifurcations carries higher risk for in-stent restenosis, stent thrombosis, and recurrent clinical events. This review summarizes the current evidence regarding application and use of biomechanical modeling in the study of stent properties, local flow dynamics, and outcomes after percutaneous coronary interventions in bifurcation lesions. Biomechanical modeling of bifurcation stenting involves computational simulations and in vitro bench testing using subject-specific arterial geometries obtained from in vivo imaging. Biomechanical modeling has the potential to optimize stenting strategies and stent design, thereby reducing adverse outcomes. Large-scale clinical studies are needed to establish the translation of pre-clinical findings to the clinical arena.

This study aimed at comparing the mid-term clinical outcome of everolimus-eluting (EES) with sirolimus-eluting (SES) stents in the provisional bifurcation stenting guided by intravascular ultrasound (IVUS). We compared the clinical outcome up to 9-month follow-up results of the prospective J-REVERSE registry of 300 non-left main bifurcation lesions in 298 patients treated with EES (n = 240) and SES (n = 60). The SB dilation with the kissing balloon technique (KBT) was performed in 54 %. The patient and lesion characteristics of the groups were similar. The incidences of SB dissections, occlusions, stenting, and slow flow were similar. A greater luminal volume gain was achieved in the proximal MV after KBT compared in non-KBT treated lesions in the EES group (7.9 ± 2.4 versus 7.0 ± 2.0 mm(3)/mm, p = 0.002), though not in the SES group. The SB diameter stenosis in the non-KBT treatment at 9 months was greater than the KBT in both groups. The incidence of target lesion revascularisation (TLR) was 5.0 % in the EES versus 8.3 % in the SES group (p = 0.35), and the incidence of major adverse cardiac events, including TLR, myocardial infarction, stent thrombosis, and death was 5.4 % in the EES versus 11.7 % in the SES group (p = 0.15). IVUS-guided provisional stenting with EES achieved a greater luminal gain after than without KBT, and similar clinical outcomes as with SES up to 9-month follow-up.