Search

Numerous efforts have been made to establish three-dimensional (3D) cell cultures that mimic the structure, cell composition, and functions of actual tissues and organs in vitro; however, owing to its intrinsic complexity, precise characterization of 3D differentiation remains challenging and often results in high variations in the resulting differentiated spheroids. This study reports a 3D Raman mapping-based analytical method that helps us to identify the crucial factors responsible for inducing variability in differentiated stem cell spheroids. Human dental pulp stem cell spheroids were generated at various cell densities using the hanging drop (HD) and molded parafilm-based (MP) methods and were then further subjected to odontogenic differentiation. Thereafter, the 3D cellular differentiation in these spheroids was analyzed based on three different Raman peaks, namely, 960, 1156/1528, and 2935 cm-1, which correspond to hydroxyapatite (HA, odontogenic differentiation marker), β-carotene (precursor of HA), and proteins/cellular components (cell reference). By correlating such cell differentiation-related peaks and water/medium peaks (3400 cm-1), we discovered that the diffusion of the medium containing various nutrients and differentiation factors was crucial in determining the variations in 3D differentiation of stem cell spheroids. Odontogenic differentiation was majorly induced at the outer shell of HD spheroids (up to ∼20 μm), whereas odontogenic differentiation was markedly induced in MP spheroids (up to 40-50 μm). Considering the challenges associated with high variations in spheroid and organoid differentiation, we conclude that the proposed Raman-based 3D analysis plays a pivotal role in stem cell-based regenerative therapy and drug screening.

Direct messenger ribonucleic acid (mRNA) delivery to target cells or tissues has revolutionized the field of biotechnology. However, the applicability of regenerative medicine is limited by the technical difficulties of various mRNA-loaded nanocarriers. Herein, we report a new conductive hybrid film that could guide osteogenic differentiation of human adipose-derived mesenchymal stem cells (hADMSCs) via electrically controlled mRNA delivery. To find optimal electrical conductivity and mRNA-loading capacity, the polypyrrole-graphene oxide (PPy-GO) hybrid film was electropolymerized on indium tin oxide substrates. We found that the fluorescein sodium salt, a molecule partially mimicking the physical and chemical properties of mRNAs, can be effectively absorbed and released by electrical stimulation (ES). The hADMSCs cultivated on the PPy-GO hybrid film loaded with pre-osteogenic mRNAs showed the highest osteogenic differentiation under electrical stimulation. This platform can load various types of RNAs thus highly promising as a new nucleic acid delivery tool for the development of stem cell-based therapeutics.Supplementary material (electrochemical and FT-IR analysis on the film, additional SEM, AFM and C-AFM images of the film, optical and fluorescence images of cells, and the primers used for RT-qPCR analysis) is available in the online version of this article at 10.1007/s12274-022-4613-y.

The enhanced growth of Cu oxides underneath graphene grown on a Cu substrate has been of great interest to many groups. In this work, the strain and doping status of graphene, based on the gradual growth of Cu oxides from underneath, were systematically studied using time evolution Raman spectroscopy. The compressive strain to graphene, due to the thermal expansion coefficient difference between graphene and the Cu substrate, was almost released by the nonuniform Cu

2D heterostructures made of transition metal dichalcogenides (TMD) have emerged as potential building blocks for new-generation 2D electronics due to their interesting physical properties at the interfaces. The bandgap, work function, and optical constants are composition dependent, and the spectrum of applications can be expanded by producing alloy-based heterostructures. Herein, the successful synthesis of monolayer and bilayer lateral heterostructures, based on ternary alloys of MoS

Graphene oxide (GO) has proven to be a highly promising material across various biomedical research avenues, including cancer therapy and stem cell-based regenerative medicine. However, creating a uniform GO coating as a thin layer on desired substrates has been considered challenging owing to the intrinsic variability of the size and shape of GO. Herein, a new method is introduced that enables highly uniform GO thin film (UGTF) fabrication on various biocompatible substrates. By optimizing the composition of the GO suspension and preheating process to the substrates, the "coffee-ring effect" is significantly suppressed. After applying a special postsmoothing process referred to as the low-oxygen concentration and low electrical energy plasma (LOLP) treatment, GO is converted to small fragments with a film thickness of up to several nanometers (≈5.1 nm) and a height variation of only 0.6 nm, based on atomic force microscopy images. The uniform GO thin film can also be generated as periodic micropatterns on glass and polymer substrates, which are effective in one-step micropatterning of both antibodies and mouse melanoma cells (B16-F10). Therefore, it can be concluded that the developed UGTF is useful for various graphene-based biological applications.

Post-growth graphene transfer to a variety of host substrates for circuitry fabrication has been among the most popular subjects since its successful development via chemical vapor deposition in the past decade. Fast and reliable evaluation tools for its morphological characteristics are essential for the development of defect-free transfer protocols. The implementation of conventional techniques, such as Raman spectroscopy, atomic force microscopy (AFM), and transmission electron microscopy in production quality control at an industrial scale is difficult because they are limited to local areas, are time consuming, and their operation is complex. However, through a one-shot measurement within a few seconds, phase-shifting interferometry (PSI) successfully scans ≈1 mm2 of transferred graphene with a vertical resolution of ≈0.1 nm. This provides crucial morphological information, such as the surface roughness derived from polymer residues, the thickness of the graphene, and its adhesive strength with respect to the target substrates. Graphene samples transferred via four different methods are evaluated using PSI, Raman spectroscopy, and AFM. Although the thickness of the nanomaterials measured by PSI can be highly sensitive to their refractive indices, PSI is successfully demonstrated to be a powerful tool for investigating the morphological characteristics of the transferred graphene for industrial and research purposes.

Precise characterizations of stem cell differentiation into specific lineages, especially in non-destructive and non-invasive manner, are extremely important for generating patient-specific cells without mass loss of differentiated cells. Here, we report a new method capable of in situ label-free quantification of stem cell differentiation into multiple lineages, even at a single cell level. The human adipose-derived mesenchymal stem cells (hADMSCs) were first differentiated into two different types of cells (osteoblasts and adipocytes) and these differentiated cells were then intensively analyzed by micro-Raman spectroscopy. Interestingly, the Raman peaks assigned to lipid droplets and hydroxyapatite were found to be highly specific to the adipocyte (fat cell) and osteoblast (bone cell) and were thus found to be useful for generating label-free single cell Raman images in combination with CH3 (2935 cm-1) peaks for visualizing cell shape. Remarkably, based on these Raman images, we found that the osteogenesis of hADMSCs could be determined and quantified after 9 days of differentiation, which is a week earlier than with the typical alizarin red staining method. In the case of adipogenesis, the increase of lipid droplets in the cytoplasm at the single cell level could be clearly visualized and detected during the entire period of adipogenesis, which is impossible using any other currently available methods such as Oil Red O and immunostaining. Hence, the new method reported in this study is highly promising as an analytical tool for precise in-situ monitoring of stem cell differentiation, and could facilitate the use of stem cell-based materials for the regenerative therapies.

Graphene derivatives are highly promising materials for use in stem-cell-based regenerative therapies, particularly for bone regeneration. Herein, we report a graphene oxide (GO)-based hybrid platform (GOHP) that is highly effective for guiding the osteogenesis of human adipose-derived mesenchymal stem cells (hAMSCs). A GO-coated indium tin oxide (ITO) substrate was electrochemically modified with Au nanostructures (GNSs), following which a cysteine-modified quadruple-branched arginine-glycine-aspartic acid was self-assembled on the ITO-GO-GNS hybrid via Au-S bonds. The synthesized GOHP, with the highest density of GNSs (deposition time of 120 s), exhibited the highest osteogenic differentiation efficiency based on the osteogenic marker expression level, osteocalcin expression, and osteoblastic mineralisation. Remarkably, although GO is known to be less efficient than the high-quality pure graphene synthesised via chemical vapour deposition (CVD), the fabricated GOHP exhibited an efficiency similar to that of CVD-grown graphene in guiding the osteogenesis of hAMSCs. The total RNA sequencing results revealed that CVD graphene and GOHP induced the osteogenesis of hAMSCs by upregulating the transcription factors related to direct osteogenesis, Wnt activation, and extracellular matrix deposition. Considering that GO is easy to produce, cost-effective, and biocompatible, the developed GOHP is highly promising for treating various diseases/disorders, including osteoporosis, rickets, and osteogenesis imperfecta.

Graphene, a typical two-dimensional (2D) material, is known to affect a variety of stem cell behaviors including adhesion, spreading, growth, and differentiation. Here, we report for the first time the effects of four different emerging 2D materials on human adipose-derived mesenchymal stem cells (hADMSCs). Graphene oxide (GO), molybdenum sulfide (MoS2), tungsten sulfide (WS2), and boron nitride (BN) were selected as model two-dimensional materials and were coated on cell-culture substrates by a drop-casting method. Acute toxicity was not observed with any of the four different 2D materials at a low concentration range (

Stem cell-based therapies have recently emerged to treat various incurable diseases and disorders. Types of stem cell-derived cells and their functions should be intensively analyzed before therapy. However, current pre-treatment steps for biological analysis are mostly destructive. Here, we report a novel optical method that enables ultra-fast and label-free characterization of cells, eliminating invasive, destructive steps. The technique, referred to as “autofluorescence-Raman mapping integration (ARMI)” analysis uses cell autofluorescence (AF) to reveal cellular morphology and cytosolic microstructures, while Raman mapping allows site-specific intensive analysis of target molecules, which enables ultra-fast identification of cell types. We used human mesenchymal stem cells (MSCs) as a model and induced adipogenesis. Lipid droplets in cells appeared as “blanks” in three-dimensional AF images and site-specific Raman mapping guided by AF identified the structure and components of the CH2 stretch. Adipogenesis could be rapidly and precisely analyzed, not only for the same batch but also for different batches. Therefore, the developed tool is highly useful for the accurate screening of stem cell differentiation and implementation in biomedical and clinical applications.

Research on the 3D culturing of cancer cells that better mimic in vivo solid tumors is important for efficient drug screening. Herein, a new platform that effectively facilitates the formation of cancer spheroids for anticancer drug screening is reported. Cytophilic graphene oxide (GO), when selectively coated on the sidewalls of micro-wells fabricated from a cell-adhesion-resistive polymer, is found to efficiently initiates distinct donut-like formation of cancer cell spheroids. Scanning electron microscopy and Raman mapping are used to analyze vertically coated GO micropatterns (vGO-MPs) of different sizes (100-250 µm) on polymer platforms, and human liver cancer cells (HepG2), as a model cancer, are seeded on these platforms. Remarkably, the 150 µm-sized platform is found to easily and rapidly generate 3D spheroids in the absence of cell-adhesion proteins. In addition, owing to the unique characteristics of GO, vGO-MPs are highly stable for long periods of time (≈1 month), even under harsh conditions (>70 °C). Moreover, the anticancer effects of two drugs (hydroxyurea and cisplatin) and the potential anticancer compound (curcumin) on HepG2 cells are demonstrated by simply measuring decreases in spheroid sizes. Hence, this new platform is highly promising as a cancer spheroid-forming material for rapid drug screening.

Graphene derivatives have immense potential in stem cell research. Here, we report a three-dimensional graphene/arginine-glycine-aspartic acid (RGD) peptide nanoisland composite effective in guiding the osteogenesis of human adipose-derived mesenchymal stem cells (ADSCs). Amine-modified silica nanoparticles (SiNPs) were uniformly coated onto an indium tin oxide electrode (ITO), followed by graphene oxide (GO) encapsulation and electrochemical deposition of gold nanoparticles. A RGD–MAP–C peptide, with a triple-branched repeating RGD sequence and a terminal cysteine, was self-assembled onto the gold nanoparticles, generating the final three-dimensional graphene–RGD peptide nanoisland composite. We generated substrates with various gold nanoparticle–RGD peptide cluster densities, and found that the platform with the maximal number of clusters was most suitable for ADSC adhesion and spreading. Remarkably, the same platform was also highly efficient at guiding ADSC osteogenesis compared with other substrates, based on gene expression (alkaline phosphatase (ALP), runt-related transcription factor 2), enzyme activity (ALP), and calcium deposition. ADSCs induced to differentiate into osteoblasts showed higher calcium accumulations after 14–21 days than when grown on typical GO-SiNP complexes, suggesting that the platform can accelerate ADSC osteoblastic differentiation. The results demonstrate that a three-dimensional graphene–RGD peptide nanoisland composite can efficiently derive osteoblasts from mesenchymal stem cells.