Search

Abstract This project presents a quantitative detection method to identify raccoon‐derived ingredient adulteration in sausage products. The specific copy gene of the raccoon was selected as the target gene. According to the specificity of its primer and probe, the quantitative detection method of raccoon microdrops by droplet digital PCR was established. In addition, the accuracy of the proposed method was verified by artificially mixed samples, and the applicability of this method was tested based on the commercially available products. The experimental results indicate that the raccoon mass (M) and raccoon‐extracted DNA concentration have a good linear relationship when the sample content is 5–100 mg, and there is also a significant linear relationship between DNA content and DNA copy number (C) with R2 = .9982. Therefore, using DNA concentration as the median signal, the conversion equation between raw raccoon mass (M) and DNA copy number (C) could be obtained as follows: M = (C + 177.403)/16.954. The detection of artificially mixed samples and commercial samples shows that the method is accurate and suitable for quantitative adulteration detection of various sausage products in the market.

This paper reported a novel approach to quantification of adulterated fox-derived components in meat products by drop digital polymerase chain reaction (ddPCR). By using the F2 gene as the target gene of fox, a single primer was designed to identify the adulteration that had been added either inadvertently or deliberately during the process. In this paper, the fox meat was used as the experimental materials and a relationship was established between fox mass and copy number by extracting DNA and using DNA concentration as an intermediary. The results that across the dynamic range, the relationships between meat mass and DNA concentration were nearly linear (R2 = 0.9986), as was the relationship between DNA concentration and DNA copy number (R2 = 0.9992). Based on the DNA concentration, the following formulas were developed about the relationship between fox meat mass (Mfox) and DNA copy number (C): Mfox = 0.05C + 2.7.

This study investigates the relationship between Chinese farmers' propensity to adopt environment-friendly practices and their membership in cooperatives. Based on data collected in 2021 from the Fujian China Household Survey, the Endogenous Switching Probit model (ESP) is applied to account for unobserved factors that could simultaneously affect farmers' cooperative membership and their willingness to adopt environment-friendly practices. First, the results indicate that a cooperative membership has a positive impact on the level of farmers' interest in green production practices. Second, there is evidence of some heterogeneity (based on both observable and unobservable characteristics) in the impact of cooperative membership; the higher the farmers' capital returns, the more prominent the role of cooperatives in guiding these farmers. Third, participation in cooperatives is conducive to raising farmers' interest in green production. The overall conclusion is that a cooperative membership raises the Chinese farmers’ willingness to adopt environment-friendly practices.

Master-level postgraduate professional development (PPD) programs have grown rapidly in many parts of the world. Being able to complete written assignments successfully is a significant concern for students pursuing PPD studies. Yet the nature of written assignments in such programs has been under-researched. This paper reports a study conducted in the context of a Master of Education (MEd) program in an English-medium university in Hong Kong. The study addressed the research question "How do MEd written assignments prompt students to engage with academia and the professional world?" Analyses of the documentary data, comprising a collection of written assignment prompts featuring 132 tasks, revealed three categories of assignments: oriented to the professional world, oriented to academia, and connecting academia and the professional world, with the last category being the largest share (75%). The paper illustrates these categories of assignments and considers implications of the study for pedagogy and future research.

As high-capacity anode materials, spinel NiFe2O4 aroused extensive attention due to its natural abundance and safe working voltage. For widespread commercialization, some drawbacks, such as rapid capacity fading and poor reversibility due to large volume variation and inferior conductivity, urgently require amelioration. In this work, NiFe2O4/NiO composites with a dual-network structure were fabricated by a simple dealloying method. Benefiting from the dual-network structure and composed of nanosheet networks and ligament-pore networks, this material provides sufficient space for volume expansion and is able to boost the rapid transfer of electrons and Li ions. As a result, the material exhibits excellent electrochemical performance, retaining 756.9 mAh g−1 at 200 mA g−1 after cycling for 100 cycles and retaining 641.1 mAh g−1 after 1000 cycles at 500 mA g−1. This work provides a facile way to prepare a novel dual-network structured spinel oxide material, which can promote the development of oxide anodes and also dealloying techniques in broad fields.

Endometriosis is a common gynecological illness in women of reproductive age that significantly decreases life quality and fertility. Paeonol has been shown to play an important part in endometriosis treatments. Understanding the mechanism is critical for treating endometriosis. In this study, autologous transplantation combined with a 28 day ice water bath was used to create a rat model of endometriosis with cold clotting and blood stagnation. The levels of estradiol and progesterone in plasma were detected by ELISA, and the pathological changes of ectopic endometrial tissue were examined by H&E staining, which proved the efficacy of paeonol. For metabolomic analysis of plasma samples, UPLC-Q/TOF-MS was combined with multivariate statistical analysis to identify the influence of paeonol on small molecule metabolites relevant to endometriosis. Finally, the key targets were screened using a combination of network pharmacology and molecular docking approaches. The results showed that the pathological indexes of rats were improved and returned to normal levels after treatment with paeonol, which was the basis for confirming the efficacy of paeonol. Metabolomics results identified 13 potential biomarkers, and paeonol callbacks 7 of them, involving six metabolic pathways. Finally, four key genes were found for paeonol therapy of endometriosis, and the results of molecular docking revealed a significant interaction between paeonol and the four key genes. This study was successful in establishing a rat model of endometriosis with cold coagulation and blood stagnation. GCH1, RPL8, PKLR, and MAOA were the key targets of paeonol in the treatment of endometriosis. It is also demonstrated that metabolomic techniques give the potential and environment for comprehensively understanding drug onset processes.

Metal oxide anode materials are affected by severe volume expansion and cracking in the charging/discharging process, resulting in low capacity and poor cycle stability, which limits their application in lithium-ion batteries (LIBs). Herein, a new strategy is uncovered for a preparing spinel-structured, multi-component transition metal oxide, (Ni,Co,Mn)Fe2O4−x, with oxygen vacancies as an LIB anode material. The as-fabricated material presented excellent reversible capacity and cycling stability, delivering a discharge capacity of 1240.2 mAh g−1 at 100 mA g−1 for 200 cycles and then at 300 mA g−1 for 300 additional cycles. It presented extremely long cycle stability even at 2 A g−1, revealing 650.5 mAh g−1 after 1200 cycles. The good lithium storage capacity can be ascribed to the entropy stabilization effect, the multi-cation synergistic effect, abundant oxygen vacancies and the spinel structure. This study provides a new opportunity to fabricate and optimize conversion-type anodes for LIBs with satisfactory electrochemical performance.

In China, it has been widely recognized that graduate students urgently need to develop capabilities in engaging in academic communication at the international level, above all through writing and publishing their research in English. This educational need has stimulated the growth of EAP and the teaching of English academic writing (EAW) to graduate students across disciplines at Chinese universities. In this paper we report an interview-based study which focused on understanding Chinese emerging EAP teachers’ graduate-level EAW instruction and their endeavors of professional development (PD). Our study adds to the limited existing literature on EAP practitioners’ contextualized teaching practices and their professional development, and generates insights that can be drawn upon by EAP professionals in other contexts

Today, the development of new self-supporting electrode materials with high porosity and excellent degradation properties is of great importance for the removal of dye pollutants. Herein, this work synthesized nanoporous nickel@nickel oxide (np-Ni@NiO) electrode containing an amorphous alloy in the middle interlayer. The nanoporous structure endowed the electrode with more active sites and facilitated the ion/electron transport. The electrochemical active surface area was about 185.5 cm2. The electrochemical degradation of rhodamine B (RhB) using a np-Ni@NiO electrode was systematically investigated. The effects of technology paraments (NaCl concentration, the applied potential and pH) on electro-catalytic degradation were explored. An RhB removal rate of 99.68% was achieved in 30 s at optimized conditions, which was attributed to the unique bicontinuous ligament/pore structure and more active sites on the surface, as well as lower charge transfer resistance. In addition, the degradation mechanism of RhB in electrochemical oxidation was proposed, according to active species capture tests and EPR measurements.

(1) Background: Sheath blight is one of the most economically significant rice diseases worldwide. A study was conducted in order to find the relationship and impact of the amount of nitrogen (N) and phosphorus (P) application on the hybrid rice population microclimate and the severity of sheath blight. (2) Methods: Four N and four P application levels were used to determine their impact on plant type, temperature, and humidity variation in different positions of population and the severity of sheath blight in the later stage. (3) Results: We found that N and P application levels could affect the plant type and change the population temperature and humidity by increasing the leaf length and leaf angle. (4) Conclusions: N application had a more significant (p < 0.05) impact on the plant type. High N application caused decreased temperature (hybrid rice population), while increased humidity (especially the population base layer at grain filling stage) resulted in severe sheath blight. High P application had similar impacts; however, P application increased material and nitrogen transport in plants and reduced the severity of sheath blight.

Designing a novel photocatalytic composite for the efficient degradation of organic dyes remains a serious challenge. Herein, the multi-layered Co3O4@NP-CuO photocatalyst with unique features, i.e., the self-supporting, hierarchical porous network as well as the construction of heterojunction between Co3O4 and CuO, are synthesized by dealloying-electrodeposition and subsequent thermal treatment techniques. It is found that the interwoven ultrathin Co3O4 nanopetals evenly grow on the nanoporous CuO network (Co3O4@NP-CuO). The three-dimensional (3D) hierarchical porous structure for the catalyst provides more surface area to act as active sites and facilitates the absorption of visible light in the photodegradation reaction. Compared with the commercial CuO and Co3O4 powders, the newly designed Co3O4@NP-CuO composite exhibits superior photodegradation performance for RhB. The enhanced performance is mainly due to the construction of heterojunction of Co3O4/CuO, greatly promoting the efficient carrier separation for photocatalysis. Furthermore, the possible photocatalytic mechanism is analyzed in detail. This work provides a promising strategy for the fabrication of a new controllable heterojunction to improve photocatalytic activity.

Developing a facile and environmentally friendly approach to the synthesis of nanostructured Ni(OH)2 electrodes for high-performance supercapacitor applications is a great challenge. In this work, we report an extremely simple route to prepare a Ni(OH)2 nanopetals network by immersing Ni nanofoam in water. A binder-free composite electrode, consisting of Ni(OH)2 nanopetals network, Ni nanofoam interlayer and Ni-based metallic glass matrix (Ni(OH)2/Ni-NF/MG) with sandwich structure and good flexibility, was designed and finally achieved. Microstructure and morphology of the Ni(OH)2 nanopetals were characterized. It is found that the Ni(OH)2 nanopetals interweave with each other and grow vertically on the surface of Ni nanofoam to form an “ion reservoir”, which facilitates the ion diffusion in the electrode reaction. Electrochemical measurements show that the Ni(OH)2/Ni-NF/MG electrode, after immersion in water for seven days, reveals a high volumetric capacitance of 966.4 F/cm3 at a current density of 0.5 A/cm3. The electrode immersed for five days exhibits an excellent cycling stability (83.7% of the initial capacity after 3000 cycles at a current density of 1 A/cm3). Furthermore, symmetric supercapacitor (SC) devices were assembled using ribbons immersed for seven days and showed a maximum volumetric energy density of ca. 32.7 mWh/cm3 at a power density of 0.8 W/cm3, and of 13.7 mWh/cm3 when the power density was increased to 2 W/cm3. The fully charged SC devices could light up a red LED. The work provides a new idea for the synthesis of nanostructured Ni(OH)2 by a simple approach and ultra-low cost, which largely extends the prospect of commercial application in flexible or wearable devices.

Purpose: Learning to do research has been understudied in the context of professional development in postgraduate programs. This exploratory study investigated the agency and experiences of five Chinese students who learned to design their research project in a Master of Education program at an English-medium university in Hong Kong SAR. Design/Approach/Methods: We obtained the data from semi-structured interviews and documents to establish data triangulation. Findings: The findings revealed that (1) the students’ agency in research design and proposal writing was associated with their personal/professional backgrounds, (2) their English proficiency affected their agency in the proposal writing, (3) the supervisors’ feedback would stimulate students’ agency in changing/refining their research design, and (4) ineffective supervision and learning resources would impede students’ achievement of agency on their way to creating a robust research design. Originality/Value: This study adds empirical evidence to the field of research training through the lens of learner agency. It demonstrates the applicability of using the ecological framework of agency in theoretically interpreting the contextual facilitators and constraints in making postgraduate students active agents.

Background. PD-1/PD-L1 inhibitors have made unprecedented progress in the treatment of cancer. Methods. A systemic search was conducted for randomized controlled trials that compared PD-1/PD-L1 inhibitor monotherapy or combination therapy with nonimmunotherapy. Hazard ratios (HRs) of overall survival (OS) according to the sex, age, ECOG PS, smoking status, liver metastasis, PD-L1 expression, EGFR, and KRAS status of patients were analyzed. Results. Totally, 13 studies with monotherapy and 5 with combination regimens were included, and the pooled HRs of OS were 0.74 (P

By virtue of the high theoretical capacity of Si, Si-related materials have been developed as promising anode candidates for high-energy-density batteries. During repeated charge/discharge cycling, however, severe volumetric variation induces the pulverization and peeling of active components, causing rapid capacity decay and even development stagnation in high-capacity batteries. In this study, the Si/Fe2O3-anchored rGO framework was prepared by introducing ball milling into a melt spinning and dealloying process. As the Li-ion battery (LIB) anode, it presents a high reversible capacity of 1744.5 mAh g−1 at 200 mA g−1 after 200 cycles and 889.4 mAh g−1 at 5 A g−1 after 500 cycles. The outstanding electrochemical performance is due to the three-dimensional cross-linked porous framework with a high specific surface area, which is helpful to the transmission of ions and electrons. Moreover, with the cooperation of rGO, the volume expansion of Si is effectively alleviated, thus improving cycling stability. The work provides insights for the design and preparation of Si-based materials for high-performance LIB applications.

Despite growing interest in exploring the application of chatbots in language education, studies on the process of chatbot-assisted language learning are scant. This qualitative study uses activity theory to understand how English as a foreign language students engage with a chatbot, Argumate, when composing argumentative essays. Five Chinese undergraduate students performed an argumentative writing task with the assistance of Argumate. Screen recordings capturing the students' writing processes, chat logs between the students and Argumate, the students' argumentative essays, and their responses to a post-task questionnaire survey were collected and analysed. The results indicated that the students formed a learning community with Argumate in which they used various mediating tools, including online information sources, notes, translation tools, and typing assistants, to facilitate their interaction with the chatbot. Additionally, the student-Argumate collaborative writing was shaped by rules associated with meeting task requirements and following argumentative writing conventions. At the same time, the students' need for additional scaffolds beyond those offered by Argumate posed challenges to their collaboration. Our findings contribute to a better understanding of the complex interplay among students, chatbots, and other key elements in the activity system of chatbot-assisted writing and generate insights into the application of chatbots to writing pedagogy.

Feedback processes are crucial in doctoral supervision but require adaptation to meet the changing nature of the doctorate, and increasing impetus to publish during the candidature. This study builds on concepts of authentic feedback and feedback literacy to chart possibilities for the development of feedback socialization in doctoral education. Semi-structured interviews with twenty doctoral supervisors in a faculty of education in Hong Kong aimed to investigate their understandings of feedback, its enactment within the doctoral process, and broader feedback inputs beyond the supervisor. Data were analyzed through reflexive thematic analysis and trustworthiness was enhanced through a member checking focus group with a sub-set of four of the interviewees. The analysis is informed by sociocultural theory with emphasis on co-construction of insights between supervisors and doctoral students. The findings highlight supervisors' understandings of feedback as comments, interaction and follow-up; and authentic feedback generated from presenting at conferences or submitting to journals. A contribution of the paper lies in bringing to bear conceptual insights from feedback research in undergraduate education to inform feedback in doctoral supervision. We deploy the concept of authentic feedback, practices that resemble those of the relevant workplace, to demonstrate how journal peer review facilitates the socialization of doctoral students into academic publishing norms. Key supervisor roles lie in guiding the enactment of responses to peer review, and supporting the development of resilience. Proposed features of supervisors' feedback literacy include sociocultural-based dialogue and co-construction, emphasis on the enactment of feedback and working with authentic feedback of different forms.

In this paper we report a study which was aimed to find out how overseas-trained Chinese management academics (CMAs) compare with their home-trained counterparts in English-medium scholarly experience. Our data were drawn from a web-based questionnaire distributed following the conclusion of the biennial conference of the International Association of Chinese Management Research (IACMR) held in 2014, the part of the conference program which featured English sessions, e-mail interviews with some questionnaire respondents, and observation at the conference site. Our findings comparatively illustrate the English-medium scholarly experience of the two cohorts of CMAs in terms of their participation in the English presentation sessions of IACMR2014, their use of English as university academics, and the relationship between English/Chinese-medium research productivity and self-perceived English abilities. Our study highlights heterogeneity among different groups of English as an Additional Language (EAL) scholars and calls for more contextualized investigation of the diversified experiences of EAL scholars across countries and disciplines in this English-dominant academic world.

An AZ80 alloy with ultra-high strength and good ductility has been successfully prepared by a novel processing route of combining extrusion and caliber rolling. The caliber rolled (CRed) AZ80 alloy has a necklace grain structure with ultrafine dynamic recrystallized (DRXed) grains formed around the micro-scale deformed grains, which is remarkably different from the uniform microstructure of as-extruded sample free from caliber rolling. In addition, both the deformed region and the DRXed part in CRed AZ80 alloy exhibit more random basal texture than that of the as-extruded sample. Furthermore, the CRed AZ80 alloy demonstrates an excellent comprehensive mechanical property with the ultimate tensile strength of 446MPa and elongation of 13%, respectively. These good mechanical properties of CRed AZ80 alloy can be attributed to the synthetic effects of necklace bimodal microstructure containing ultra-fine grains, profuse Mg17Al12 precipitates, and the modified texture.

To improve glucose electrocatalytic performance, one efficient manner is to develop a novel Cu-Ag bimetallic composite with fertile porosity and unique architecture. Herein, the self-supported electrode with CuxO/Ag2O (x = 1, 2) nanowires grown in-situ on a nanoporous Cu-Ag network (CuxO/Ag2O@NP-CuAg) has been successfully designed by a facile two-step approach. The integrated hierarchical porous structure, the tip-converged CuxO/Ag2O nanowires combined with the interconnected porous conductive substrate, are favorable to provide more reactive sites and improve ions or electrons transportation. Compared with monometallic Cu2O nanowires integrated with nanoporous Cu matrix (Cu2O@NP-Cu), the bimetallic CuxO/Ag2O@NP-CuAg composites exhibit the enhanced electrocatalytic performance for glucose. Moreover, the higher sensitivity of ~1.49 mA mM−1 cm−2 in conjunction with a wider linear range of 17 mM for the CuxO/Ag2O@NP-CuAg electrode anodized for 10 min are attributed to the synergistic effect of porous structure and bimetallic CuxO/Ag2O nanowires. Particularly, the integrated CuxO/Ag2O@NP-CuAg composites possess good flexibility, which has been reported for the first time. Accordingly, the CuxO/Ag2O@NP-CuAg with excellent glucose electrocatalytic performance and good flexibility is promising to further develop as a candidate electrode material of glucose sensors.

We describe the complete mitochondrial genome of Phiaris dolosana. It is 15,562 bp in length, and contains 13 protein-coding genes (PCGs), 22 transfer RNA genes (tRNAs), 2 ribosomal RNA genes (rRNAs), and a 612 bp D-Loop. All PCGs start with ATN codon except for COI gene, which uses CGA as the initiation codon. Nine of 13 PCGs use a typical stop codon of TAA, the rest use incomplete stop codon of T or TA. Phylogenetic analysis of P. dolosana with other 17 leaf rollers is conducted with neighbor-joining method, the result is consistent with the conventional classification.

The leaf roller, Eudemis lucina, is a potential pest of Quercus in East Asia. In this study, we described the complete mitochondrial genome of this species by high-throughput sequencing. The mitochondrial genome is found to be a circular molecule of 16,056 bp in length, which consisted of 13 protein-coding genes (PCGs), 22 tRNA genes, 2 rRNA genes, and a non-coding control region (A + T-rich region). The A + T content is 80.5% for the whole mitogenome. All PCGs are initiated by ATN codons, except for COI which is initiated by the CGA codon. Eight PCGs use a typical stop codon of TAA, whereas the remaining PCGs use incomplete stop codon of T–– or TA–. The non-coding control region is 1013 bp and located between s-rRNA and Met-tRNA.

In this paper I discuss some constraints and implications in accessing fellow academics as research participants, a topic that has rarely been addressed thus far in the literature. I will point out that a lack of cooperation from fellow academics may defeat our research purposes, and will survey some studies involving U.S., European, and Chinese academics as research participants to illustrate education researchers’ efforts to work with fellow academics against the odds. By referencing my personal experience of engaging with Chinese academics, I will then discuss the role of personal contacts in research and reflect upon various constraints in accessing fellow academics as research participants. I will suggest that, when we do participate in a fellow researcher’s project, the incentive is a desire to support our peers in the spirit of “academic citizenship.”

In this conceptual paper, we address the problem that novice scholars in social sciences sometimes have in constructing conceptual or theoretical frameworks for their dissertations and papers for publication. In the first part of the paper, we discuss why the topic is important in the high pressure environment that novice scholars face, in which finishing a doctoral degree and getting published can make a difference in career success or failure, and explain our understanding of theoretical/conceptual framing, including provisionally defining some key terms. We then elucidate ten problems that novice scholars have with theoretical/conceptual framing, using our own experiences as manuscript reviewers and writers as examples. The paper concludes with ways that novice scholars can address the task of framing their scholarly work conceptually and theoretically, on the understanding that the struggles continue over the lifetime of a scholarly career.

China’s medical research has been growing in visibility at the international level in recent years. Contributing to this development is the English-publishing policy now often found in the country’s major hospitals. In this paper, I report a study conducted at the Orthopedics Department of a major hospital in east China. Based on interviews with eleven orthopedic surgeons who are expected to publish both Chinese and English (SCI) papers (with the latter privileged), I describe their reactions to the publication policy and their approaches to fulfilling the publication requirement. The paper will end by calling for more contextualized research that brings forth the voices of English as an Additional Language (EAL) researchers in various academic and professional contexts.

In this paper we report a study which was aimed to find out how overseastrained Chinese management academics (CMAs) compare with their hometrained counterparts in English-medium scholarly experience. Our data were drawn from a web-based questionnaire distributed following the conclusion of the biennial conference of the International Association for Chinese Management Research (IACMR) held in 2014, the part of the conference program which featured English sessions, e-mail interviews with some questionnaire respondents, and observation at the conference site. Our findings comparatively illustrate the English-medium scholarly experience of the two cohorts of CMAs in terms of their participation in the English presentation sessions of IACMR2014, their use of English as university academics, and the relationship between English/Chinese-medium research productivity and self-perceived English abilities. Our study highlights heterogeneity among different groups of English as an Additional Language (EAL) scholars and calls for more contextualized investigation of the diverse experiences of EAL scholars across countries and disciplines in this Englishdominant academic world

Free dealloying of Cu-Hf-Al metallic glasses in HCl electrolytes are studied in this paper. The results show that the electrolyte concentration and dealloying time strongly influence the type of dealloying products. A superficial dealloying happens in diluted HCl electrolytes while a complete dealloying occurs in concentrated HCl electrolytes. The results present that Cu2O microparticles with regular morphology can be tailored on glassy surfaces in 0. 05 M HCl solution by controlling the dealloying time. Furthermore, the designable products of nanoporous Cu, Cu2O nanoplates and CuO microwires can be fabricated in 1. 2 M HCl electrolyte with the dealloying time. Due to a big difference of examined Cu-Hf-Al alloys in the electrolyte concentration and dealloying time, one or mixed dealloying products (Cu, Cu2O and CuO), which depend on the progress of relative chemical reactions and the different dealloying route, will finally be produced.

High-entropy alloys (HEAs) present excellent mechanical properties. However, the exploitation of chemical properties of HEAs is far less than that of mechanical properties, which is mainly limited by the low specific surface area of HEAs synthesized by traditional methods. Thus, it is vital to develop new routes to fabricate HEAs with novel three-dimensional structures and a high specific surface area. Herein, we develop a facile approach to fabricate nanoporous noble metal quasi-HEA microspheres by melt-spinning and dealloying. The as-obtained nanoporous Cu30Au23Pt22Pd25 quasi-HEA microspheres present a hierarchical porous structure with a high specific surface area of 69.5 m2/g and a multiphase approximatively componential solid solution characteristic with a broad single-group face-centered cubic XRD pattern, which is different from the traditional single-phase or two-phase solid solution HEAs. To differentiate, these are named quasi-HEAs. The synthetic strategy proposed in this paper opens the door for the synthesis of porous quasi-HEAs related materials, and is expected to promote further applications of quasi-HEAs in various chemical fields.

Mg-Zn-Ca amorphous alloys are considered as potential bone implants. A large number of works have focused on the alloys under free corrosion environment. However, the real service environment of bone implants is a kind of chemistry-mechanics interactive environment in which the materials not only suffer corrosion by body fluids but also bear applied force induced by body movement. In order to imitate the real service environment, surface morphologies and mechanical properties of Mg-Zn-Ca amorphous alloys were studied under different chemistry-mechanics interactive environments in this paper. It was found that cracks and Ca/Mg phosphates formed on the surface of amorphous alloys. The compressive strength of the alloys decreased seriously but could still reach an acceptable value to avoid material failure. Fan-shaped patterns found on all the samples implied that brittle fracture was the main fracture form. Moreover, vein-like patterns could still be found in some areas, showing a locally plastic deformation. This was the reason why the alloy could maintain a high compressive strength after severe and interactive treatments. The study could guide related works in the establishment of experimental environments in the future, which will facilitate a more accurate biomedical evaluation of bone implants.

Dr Patrick O’Connor is a scientist based in Adelaide, Australia [...]

In the literature on academic publishing, little attention has been paid to the needs and concerns of non-English-speaking researchers in professional contexts. This paper addresses the gap in that literature by providing insights into the situation with medical doctors in China. Following an overview of the broad picture, I will report a case study, which was conducted at a major hospital in East China and which aimed at exploring how a group of orthopedic surgeons access the English medical literature and to what extent they seek the support of editorial services and training in academic writing/publication skills. The results of the study show that the participant doctors tend to rely on their students or overseas personal connections for access to full-text medical literature, and they have generally had limited experience with language editorial services and academic writing/publication skills seminars. The paper ends by discussing some challenges while proposing recommendations for enhancing Chinese doctors’ access to the full-text medical literature, as well as their understanding of the kind of support that can be provided by editorial services and training in publication skills.

Mg‒Zn‒Ca metallic glasses are regarded as promising biodegradable materials. Previous studies on this alloy system have mostly focused on the composition regions with a large critical size (Dc) for the formation of metallic glasses, while this paper investigates the composition regions with a small Dc, which has been overlooked by researchers for a long time. The effects of the addition of Ag, Nd, and Yb elements on the microstructure and mechanical properties of Mg‒Zn‒Ca metallic glasses were studied. It was found that the Mg‒Zn‒Ca metallic glass exhibits a single and uniform amorphous structure with a compressive strength of 590 MPa. After the addition of a small amount of Ag into the alloy, the amorphous matrix is retained and new precipitate phases that lead to the decrease of the compressive strength are formed. The addition of the rare earth elements Nd and Yb changes the microstructure from a single amorphous matrix to a large number of quasicrystal phases, which results in an increase in compressive strength. The compressive strength of the Mg‒Zn‒Ca‒Yb alloy increases to 606.2 MPa due to the formation of multi-layered swirling solidified structure and a large number of small quasicrystals with high microhardness. Moreover, this study can be considered as a useful supplement to the existing studies on the Mg‒Zn‒Ca alloy system; it also provides new ideas for designing the microstructure and spatial structure of quasicrystal containing alloys with high performances.