Search

To replace precious Pt-based counter electrodes (CEs) with a low-cost Pt-free catalyst of CEs is still a motivating hotspot to decrease the fabrication cost of dye-sensitized solar cells (DSSCs). Herein, four different V2O3@C composite catalysts were synthesized by pyrolysis of a precursor under N2 flow at 1100 °C and further served as catalytic materials of CEs for the encapsulation of DSSCs. The precursors of V2O3@C composites have been prepared via a sol-gel method using different proportions of V2O5 with soluble starch in a H2O2 solution. Power conversion efficiencies (PCEs) of 3.59, 4.79, 5.15, and 5.06% were obtained from different V2O3@C composites, with soluble starch-to-V2O5 mass ratios (S/V) of 1:2, 1:1, 2:1, and 4:1, respectively, as CEs to reduce iodide/triiodide in DSSCs. The improvement of electrode performance is due to the combined effects on the increased specific surface area and the enhanced conductivity of V2O3@C composite catalysts.

Two-dimensional (2D) phase unwrapping is a key step in the existing advanced metrology technologies such as optical interferometry, optical three-dimensional (3D) measurement, and satellite radar interferometry (SAR). In this paper, the performance of three spatial phase unwrapping algorithms, branch-cut phase unwrapping algorithm (BC), minimum discontinuity algorithm (MD), and fast phase unwrapping algorithm (FPU) were compared in the case of noise pollution. The results show that the MD algorithm has satisfactory behavior in anti-noise, but it is time consuming compared with the other two algorithms. Therefore, two hybrid algorithms, combining the MD algorithm with the BC algorithm and the FPU algorithm, respectively, were proposed in this paper. In these two new algorithms, the merits of fast speed of BC algorithm and FPU algorithm were fully taken into account, and the advantage of the strong anti-noise of MD algorithm was also exploited. The accuracy of the new algorithms is improved compared with the BC and FPU, and the speed of the new algorithms is improved compared with the MD. The effectiveness of two hybrid algorithms is verified by the results of simulation and actual experiments.

To replace precious Pt-based counter electrodes (CEs) with a low-cost Pt-free catalyst of CEs is still a motivating hotspot to decrease the fabrication cost of dye-sensitized solar cells (DSSCs). Herein, four different V2O3@C composite catalysts were synthesized by pyrolysis of a precursor under N2 flow at 1100 °C and further served as catalytic materials of CEs for the encapsulation of DSSCs. The precursors of V2O3@C composites have been prepared via a sol–gel method using different proportions of V2O5 with soluble starch in a H2O2 solution. Power conversion efficiencies (PCEs) of 3.59, 4.79, 5.15, and 5.06% were obtained from different V2O3@C composites, with soluble starch-to-V2O5 mass ratios (S/V) of 1:2, 1:1, 2:1, and 4:1, respectively, as CEs to reduce iodide/triiodide in DSSCs. The improvement of electrode performance is due to the combined effects on the increased specific surface area and the enhanced conductivity of V2O3@C composite catalysts.

The counter electrodes (CEs) as the basic components of dye-sensitized solar cells (DSSCs) mainly use Pt-based catalysts. It is still an urgent need to decrease the assembled cost of DSSCs by designing high-performance and low-cost Pt-free materials to replace the scarce and expensive Pt as CEs catalyst. How particularly striking are that specific precursors were prepared by ball-grinding with polyoxotungstate (H3PW12O40) as metal source and melamine (C3N3(NH2)3) as carbon source and nitrogen source, and then the pyrolysis process of precursors were dynamically controlled along the temperature gradient to make the auxiliary groups leave, so as to obtain the expected N-doped W2C catalytic materials. Herein, four kinds of N-doped W2C materials have derived from polyoxotungstate precursors at the pyrolysis temperatures of 700, 800, 900 and 1000 °C, and further applied to assemble CEs catalysts in DSSCs. The high power conversion efficiencies (PCE) of 6.10, 7.01, 5.95 and 5.34% were obtained for the regeneration of traditional iodide/triiodide (I3−/I−), respectively. The enhanced performance of N-doped W2C materials can be attributed to the larger number of catalytic active sites, which was due to the higher specific surface area provided by pyrolysis and carbonization of organic complex precursor, and the activation and modification of materials by the N-doped and the high temperature.