Search

A new cascaded hexagonal ring-shaped metamaterial element is designed, which is arranged periodically and placed on the top of a traditional microstrip antenna to optimize the performance of the traditional antenna. The simulation results show that the new metamaterial microstrip antenna works at near 10 GHz, the impedance bandwidth is extended by 0.25 GHz and the gain is increased by 113.6% compared with a traditional microstrip antenna. Cross-shaped slots are etched on the ground plate of the microstrip antenna to widen the impedance bandwidth. It is shown that the impedance bandwidths at the resonant frequencies of 10 GHz and 14 GHz are broadened by 0.06 GHz and 0.56 GHz, respectively, and the gain of the slot-etched antenna is 13.454 dB. After the metamaterial unit structure is optimized, a nested double-hexagon ring-shaped electromagnetic metamaterial unit structure is proposed. The metamaterial slot microstrip antenna operates in two frequency bands of 10 GHz and 14 GHz; the relative bandwidths are increased to 16.9% and 19.4% with two working bandwidths of 1.74 GHz and 4.98 GHz, respectively; and the gain and directivity are also improved compared with the traditional microstrip antenna. The metamaterial unit structure proposed in this paper is of certain reference value for the variety of metamaterial and the application of metamaterial in traditional microstrip antennas.

Owing to the non-maintainability and service continuity requirement of space power in earth orbit, this paper proposes a fault tolerant operation of push-pull current-fed converter under open and short circuit switch fault. Based on voltage and current time domain threshold, a fast fault detection algorithm is proposed which is essential to avoid fault propagation to the whole system. Besides, a fault tolerant topology and operation strategy are introduced. Thus, the studied converter can be reconfigured under both type of switch failures. Moreover, redundant switches are used for converter reconfiguration in post-fault operation. To confirm the validity of the proposed process, the results of Hardware-In-the-Loop (HIL) are presented and discussed, which all in excellent agreement with the good performances of the theoretical analysis.

Traditional metal chelators, such as ethylenediaminetetraacetic acid (EDTA), have been gradually replaced due to their poor biodegradability in soil and high risk of heavy metal leaching into groundwater, which pose high environmental risks to the health of humans and animals. In this study, a liquid amino acid fertilizer (LAAF, waste proteins from hydrolysates of animal carcasses) and polyaspartate (PASP) were used as additives to enhance the phytoextraction of cadmium (Cd) and lead (Pb) from contaminated soil. We conducted pot experiments to investigate the phytoextraction capacity of Solanum nigrum, a Cd accumulator, grown on soil highly contaminated with Cd and Pb in the absence (as controls) or presence of PASP and LAAF. Both PASP and LAAF significantly improved plant growth, Cd accumulation, and total Cd and Pb content in S. nigrum shoots and roots. PASP and LAAF application promoted Cd translocation from roots to shoots in S. nigrum and Cd bio-accessibility in rhizosphere soils, but this was not the case for Pb. Both PASP and LAAF increased Cd and Pb phytoextraction by S. nigrum plants, and Cd phytoextraction was more effective in LAAF-assisted S. nigrum than in PASP-assisted S. nigrum. These findings demonstrate that the low cost and ecofriendly features of recycled waste proteins make them good candidates for chelant-enhanced phytoextraction from heavy metal-contaminated soils.