Search

Electrodeposited composite coatings consisting of reinforcement, solid lubricant and tough metallic matrix usually exhibit excellent tribological properties, including high resistance to wear and corrosion, low coefficient of friction, and other desired properties. However, if the distribution of the reinforcement is not homogeneous due to particle agglomeration, especially for fine or nano-sized particles, the performance of the coatings could be largely deteriorated. In the work, Cu-Sn-PTFE- TiO 2 composite coatings were made using a pulse electroplating process. Homogeneous distribution of TiO 2 particles in the coatings was achieved using highly homogeneous dispersion of nano TiO 2 Sol in the plating solution rather than directly dispersing the TiO 2 nanoparticles in the solution. Such fabricated Cu-Sn-PTFE- TiO 2 coatings showed smooth surface, refined grains and high micro-hardness, leading to excellent tribological properties and corrosion resistance. However, too much TiO 2 Sol led to changes in the solution's pH value, accompanied with agglomeration of the TiO 2 Sol, lowering the quality of the coatings with decreased resistance to failure during sliding wear tests. This study demonstrates that application of nanoparticle sol in a proper concentration range is an effective new approach to achieve homogeneous distribution of reinforcing nanoparticles in electrodeposited composite coatings for high wear resistance, low friction and corrosion resistance. • Homogeneous dispersion of TiO 2 nanoparticle in TiO 2 Sol containing plating solution resulted in Cu-Sn-PTFE-TiO2 composite coatings with homogeneously distributed nanoparticles in a fine-grained matrix. • With an appropriate TiO 2 Sol concentration, the Cu-Sn-PTFE-TiO 2 coating shows refined crystalline grain and high hardness, leading to improved tribological properties. • Too much TiO 2 Sol however promoted agglomeration of the TiO 2 Sol, thus deteriorating the coating. • The Sol is a new and effective method of making homogeneous nano-composite coatings with higher mechanical strength and improved tribological properties. [ABSTRACT FROM AUTHOR]