Search

This study aimed to develop and evaluate a convolutional neural network for identifying scaphoid fractures on radiographs. A dataset of 1918 wrist radiographs (600 patients) was taken from an orthopaedic referral centre between 2010 to 2020. A YOLOv3 and a MobileNetV3 convolutional neural network were trained for scaphoid detection and fracture classification, respectively. The diagnostic performance of the convolutional neural network was compared with the majority decision of four hand surgeons. The convolutional neural network achieved a sensitivity of 82% and specificity of 94%, with an area under the receiver operating characteristic of 92%, whereas the surgeons achieved a sensitivity of 76% and specificity of 96%. The comparison indicated that the convolutional neural network's performance was similar to the majority vote of surgeons. It further revealed that convolutional neural network could be used in identifying scaphoid fractures on radiographs reliably, and has potential to achieve the expert-level performance. Level of evidence: III [ABSTRACT FROM AUTHOR]

The aim of this study was to present the results of plate and K-wire fixation for type Vb jersey finger. We used a miniplate system combined with a K-wire to treat nine cases of acute type Vb jersey finger injury. The fracture healing time, functional outcomes, and complications were assessed. The follow-up time ranged from 13 to 44 months. All fractures healed within 7 weeks. The mean active range of motion was 70.6° (60° to 80°) for the distal interphalangeal joint and 105° (100° to 110°) for the proximal interphalangeal joint. All affected fingers were able to move actively with no pain, and there was no nail deformity. Two patients with the longest radiographic follow-up showed a congruent joint surface with no degenerative change at 44 months. Miniplate and K-wire fixation offers adequate fixation strength for the early initiation of active exercises so that a good functional result can be achieved. Therapeutic V. [ABSTRACT FROM AUTHOR]

We retrospectively reviewed 12 minimally displaced fractures of the scaphoid waist in 12 patients who developed delayed or nonunions with or without conservative treatment. Mean time between injury and surgery was 6 months (range 3–12). The fractures were stabilized with double screws, which were percutaneously inserted with robot assistance, and without bone grafting. All fractures united at a mean of 8 weeks (range 6–10) after surgery. The patients were followed-up at 6 months and 1 year. The patients recovered good wrist function. No major postoperative complications were reported, and the patients returned to their usual level of activity. Robot assistance gave a high degree of accuracy when placing the cannulated screws since only two attempts were needed for correct placement of the guide wires. We explain the high union incidence by patient selection, good stabilization and not disturbing the vascular supply. Level of evidence: IV [ABSTRACT FROM AUTHOR]

The feasibility and accuracy of robot-assisted bone tunnel construction in the transosseous repair of the triangular fibrocartilaginous complex (TFCC) were compared with those of freehand arthroscopic repair. A total of 20 cadaveric specimens were randomized into robotic-assisted and arthroscopy-guided groups. Three bone tunnels were constructed in the ulnar foveal region in each specimen. The discrepancy between the planned and actual tunnel exits was determined in the robot-assisted group by merging images. The success rate of tunnel construction, time consumption and number of drilling attempts were compared between groups. The median planned/actual exit discrepancy was 0.8 mm in the robot-assisted group, with 90% of tunnel exits successfully placed in the footprint region, compared to 63.3% in the arthroscopy-guided group. The robot-assisted group spent less time and required fewer drilling attempts to construct bone tunnels. These results indicated that the robot-assisted technique can accurately construct multiple bone tunnels in the foveal region and reduce the difficulty of TFCC transosseous repair. Level of evidence: III.

Objective: To observe the possibility of hyper selective neurectomy (HSN) of triceps branches combined with partial neurotomy of S 2 nerve root for relieving spastic equinus foot., Methods: Anatomical studies were performed on 12 adult cadaveric specimens. The S 2 nerve root and its branches were exposed through the posterior approach. Located the site where S 2 joined the sciatic nerve and measured the distance to the median line and the vertical distance to the posterior superior iliac spine plane, and the S 2 nerve root here was confirmed to have given off branches of the pelvic splanchnic nerve, the pudendal nerve, and the posterior femoral cutaneous nerve. Between February 2023 and November 2023, 4 patients with spastic equinus foot were treated with HSN of muscle branches of soleus, gastrocnemius medial head and lateral head, and cut the branch where S 2 joined the sciatic nerve. There were 3 males and 1 female, the age ranged from 5 to 46 years, with a median of 26 years. The causes included traumatic brain injury in 2 cases, cerebral hemorrhage in 1 case, and cerebral palsy in 1 case. The disease duration ranged from 15 to 84 months, with a median of 40 months. The triceps muscle tone measured by modified Ashworth scale (MAC) before operation was grade 3 in 2 cases and grade 4 in 2 cases. The muscle strength measured by Daniels-Worthingham manual muscle test (MMT) was grade 2 in 1 case, grade 3 in 1 case, and 2 cases could not be accurately measured due to grade 4 muscle tone. The Holden walking function grading was used to evaluate lower limb function and all 4 patients were grade 2. After operation, triceps muscle tone, muscle strength, and lower limb function were evaluated by the above grading., Results: The distance between the location where S 2 joined the sciatic nerve and median line was (5.71±0.53) cm and the vertical distance between the location and posterior superior iliac spine plane was (6.66±0.86) cm. Before joining the sciatic nerve, the S 2 nerve root had given off branches of the pelvic splanchnic nerve, the pudendal nerve, and the posterior femoral cutaneous nerve. All the 4 patients successfully completed the operation, and the follow-up time was 4-13 months, with a median of 7.5 months. At last follow-up, the muscle tone of the patients decreased by 2-3 grades when compared with that before operation, and the muscle strength did not decrease when compared with that before operation. Holden walking function grading improved by 1-2 grades, and there was no postoperative hypoesthesia in the lower limbs., Conclusion: HSN of triceps branches combined with partial neurotomy of S 2 nerve root can relieve spastic equinus foot without damaging other sacral plexus nerves.

This study aimed to develop and evaluate a convolutional neural network for identifying scaphoid fractures on radiographs. A dataset of 1918 wrist radiographs (600 patients) was taken from an orthopaedic referral centre between 2010 to 2020. A YOLOv3 and a MobileNetV3 convolutional neural network were trained for scaphoid detection and fracture classification, respectively. The diagnostic performance of the convolutional neural network was compared with the majority decision of four hand surgeons. The convolutional neural network achieved a sensitivity of 82% and specificity of 94%, with an area under the receiver operating characteristic of 92%, whereas the surgeons achieved a sensitivity of 76% and specificity of 96%. The comparison indicated that the convolutional neural network's performance was similar to the majority vote of surgeons. It further revealed that convolutional neural network could be used in identifying scaphoid fractures on radiographs reliably, and has potential to achieve the expert-level performance. Level of evidence: III.

Objective: To compare the parameters of screw implantation in capitolunate arthrodesis between the 2nd and 3rd metacarpal bones and via the distal dorsal capitate bone approach based on CT images of the normal wrist, and provide reference for the selection of surgical approaches and planning of screw insertion trajectory., Methods: CT data of 50 patients who met the criteria between February 2022 and April 2022 were selected as the study objects. There were 30 males and 20 females, and the age ranged from 18 to 69 years (mean, 37 years). The normal wrist alignment was conformed in all CT images. All CT data from the unilateral wrist of the patients was imported into Mimics Medical 20.0 software to construct a three-dimensional plane model, in which a virtual 3.5 mm screw was implanted between the 2nd and 3rd metacarpal bones and via the distal dorsal capitate bone approach. The angle between screw and coronal, sagittal, and transverse planes, the total length of the screw, the length of the screw in the lunate bone and the capitate bone were measured. The ratios of the length of the screw in capitate bone to the length of the long axis of the capitate bone, the length of the screw in lunate bone to the length of the long axis of the lunate bone, and the length of screw in lunate bone to the length of the screw in capitate bone were calculated. Assuming that the result of screw implantation between the 2nd and 3rd metacarpal bones was better than that via the distal dorsal capitate bone approach, the difference in length of the screw in the lunate bone between the two approaches was calculated, and the superiority test was performed., Results: Compared with the distal dorsal capitate bone approach, the total length of the screw increased, the length of the screw in the capitate bone decreased, and the length of the screw in the lunate bone increased, the angle between the screw and coronal plane decreased, the angles between screw and sagittal, transverse planes increased after the screw was implanted between the 2nd and 3rd metacarpal bones. And the ratio of the length of the screw in capitate bone to the length of the long axis of capitate bone decreased, the ratio of the length of the screw in lunate bone to the length of the long axis of lunate bone increased, and the ratio of the length of the screw in lunate bone to the length of the screw in capitate bone also increased. All the differences were significant ( P <0.05). The difference in the length of the screw in the lunate bone between the two approaches was 1.86 mm [95% CI (1.54, 2.18) mm], which was greater than the superiority margin (1.35 mm). The superiority hypothesis was supported., Conclusion: Compared with the distal dorsal capitate bone approach, the screws implanted between the the 2nd and 3rd metacarpal bones in the capitolunate arthrodesis are longer in lunate bone and more vertical to the articular surface of the capitolunate joint. Theoretically, the capitolunate joint are more firmly fixed.

We retrospectively reviewed 12 minimally displaced fractures of the scaphoid waist in 12 patients who developed delayed or nonunions with or without conservative treatment. Mean time between injury and surgery was 6 months (range 3-12). The fractures were stabilized with double screws, which were percutaneously inserted with robot assistance, and without bone grafting. All fractures united at a mean of 8 weeks (range 6-10) after surgery. The patients were followed-up at 6 months and 1 year. The patients recovered good wrist function. No major postoperative complications were reported, and the patients returned to their usual level of activity. Robot assistance gave a high degree of accuracy when placing the cannulated screws since only two attempts were needed for correct placement of the guide wires. We explain the high union incidence by patient selection, good stabilization and not disturbing the vascular supply. Level of evidence: IV.

Objective: To study the causes and treatment of postoperative deviation secondary to thumb duplication resection., Methods: Between February 2007 and June 2013, 32 cases (33 thumbs) of postoperative deviation secondary to thumb duplication resection were treated, and the clinical data were retrospectively analyzed. There were 13 males and 19 females, aged 2-34 years (median, 8 years). The left thumbs were involved in 7 cases, the right thumbs in 24 cases, and bilateral thumbs in 1 case. Of 33 thumbs, 2 were rated as type II, 4 as type III, 10 as type IV, 7 as type V, and 10 as type VII according to Wassel classification. The average time between duplicated thumb resection and admission was 6.5 years (range, 1-29 years). Nine thumbs only had ulnar deviation of the metacarpophalangeal (MP) joint; 8 thumbs only had radial deviation of the interphalangeal (IP) joint; 10 thumbs only had ulnar deviation of the IP joint; and 6 thumbs had ulnar deviation of the MP joint combined with radial deviation of the IP joint. The mean deviation degree of the MP joint was 32.3 (range, 20-40*), and the mean deviation degree of the IP joint was 42.5° (range, 30-110°). Operation methods were chosen specially according to the deformity, including remnant bone or cartilage resection, restoring normal alignment, and soft tissue balance., Results: All wounds got first stage healing and there was no complication associated with operation. Postoperative follow-up period ranged from 6 to 70 months (mean, 34 months). The skeleton alignment of the thumbs was improved on the X-ray images; all osteotomy got union at 5-10 weeks (mean, 6 weeks). Deviation was completely corrected in 31 thumbs; the preoperative deviation degree was too large to correct completely in 2 thumbs with a postoperative deviation degree of 10°. The motion degree was similar to that at preoperation in 13 thumbs; the motion degree decreased in 20 thumbs, which did not affect the function of the thumbs. Nineteen cases (20 thumbs) were followed more than 2 years, there was no recurrence of deviation and all thumbs developed well, but the size of affected thumb was smaller than that of the contralateral side in 14 cases (14 thumbs)., Conclusion: Getting good result and preventing postoperative deviation for thumb duplication resection acquires appropriate preoperative design, reconstruction of the insertion of the abductor poll icis brevis, transposition of the flexor and extensor pollicis longus insertion, and essential osteotomy play important roles in preventing postoperative deviation after thumb duplication resection. Individualized treatment plan for deviation should be made according to the degree and the cause of deviation.