Search

We demonstrate an environmentally friendly and scalable method to create fluorine-doped diamond-like carbon (F-DLC) coatings using plasma immersion ion implantation plasma-enhanced chemical vapor deposition (PIII-PECVD) with 1,1,1,2-tetrafluoroethane. F-DLC films tend to have low wettability and good mechanical flexibility, which make them suitable for applications in biomedical devices and antibiofouling surfaces. We report on the effects of fluorine incorporation on the surface chemistry, surface energy, and morphology of these coatings, showing that our method is effective in increasing the fluorine content in the F-DLC up to 40%. We show that the addition of fluorine leads to a decrease in surface energy, which is consistent with a reduction in surface wettability.

The dispersive linear optical properties of materials are frequently described using oscillator models, where the oscillators represent interactions between light and various material resonances (vibrational, free-carrier, interband, etc.). The state-of-the-art measurement of the complex refractive index is variable-angle spectroscopic ellipsometry (VASE), where additional measurement angles and the measured depolarization of light provides much more information compared to simpler measurements such as single-angle reflectance and transmittance. Nevertheless, even state-of-the-art VASE data can be hard to uniquely fit using oscillator models, and the resulting models may be hard to interpret physically. Here, we demonstrate the use of an additional degree of freedom, temperature, to improve the accuracy, uniqueness, and physicality of oscillator models of materials. Our approach relies on the well-understood temperature dependence of material resonances, and in particular vibrational resonances in amorphous SiO2, which are expected to change monotonically from room temperature to hundreds of degrees C. We performed VASE measurements at different temperatures, independently fitted the data at each temperature, and then confirmed that our models are unique and physical by monitoring the temperature dependence of the resulting fitting parameters. Using this technique, we generated highly accurate and precise data sets and material models describing the mid-infrared complex refractive index of three different grades of fused SiO2, which can then be used for modeling of mid-infrared optical components such as thermal emitters., Comment: Main text + supplementary (pdf updated to fix figure rendering + added a reference)

We use crystalline silicon (Si) antennas to efficiently extract broadband single-photon fluorescence from shallow nitrogen-vacancy (NV) centers in diamond into free space. Our design features relatively easy-to-pattern high-index Si resonators on the diamond surface to boost photon extraction by overcoming total internal reflection and Fresnel reflection at the diamond-air interface, and providing modest Purcell enhancement, without etching or otherwise damaging the diamond surface. In simulations, ~20 times more single photons are collected from a single NV center compared to the case without the antenna; in experiments, we observe an enhancement of ~4 times, limited by spatial alignment between the NV and the antenna. Our approach can be readily applied to other color centers in diamond, and more generally to the extraction of light from quantum emitters in wide-bandgap materials., Comment: Main text + supplementary

Laser-light sails are a spacecraft concept wherein lightweight "sails" are propelled to high speeds by lasers with high intensities. The sails must comprise materials with low optical loss, to minimize the risk of laser damage. Stoichiometric silicon nitride (Si$_3$N$_4$) is a candidate material with low loss in the near infrared, but the precise absorption coefficient has not been characterized in the membrane form-factor needed for sails. We use photothermal common-path interferometry (PCI), a sensitive pump-probe technique, to measure the absorption coefficient of stoichiometric and nonstoichiometric silicon nitride. To calibrate PCI measurements of membranes, we developed a self-referencing technique where a measurement is performed twice: once on a bare membrane, and a second time with a monolayer of graphene deposited on the membrane. The absorption of the sample with graphene can be measured by both PCI and more-conventional spectroscopic techniques, enabling the calibration of the PCI measurement. We find that with an absorption coefficient of (2.09 $\pm$ 0.76) $\times$ 10$^{-2}$ cm$^{-1}$ at 1064 nm, Si$_3$N$_4$ is a suitable laser-sail material for laser intensities as high as ~10 GW/m$^{2}$, which have been proposed for some laser-sail missions, while silicon-rich SiN$_x$ (x~1), with an absorption coefficient of 7.94 $\pm$ 0.50 cm$^{-1}$, is unlikely to survive such high laser intensities., Comment: Main text + supplementary