Search

The number of the Computed Tomography (CT) examinations has increased greatly over the past decade; This has made CT doses the largest source of the individual effective dose from medical exposures worldwide. Evaluation of image quality in CT is an important issue to ensure diagnostic accuracy, while keeping the radiation dose especially to the pediatric patient as low as reasonably possible. The purpose of this study was to assess the physical and psychophysical image quality in pediatric CT for different iterative reconstruction (IR) algorithms. The image quality was measured on each CT system using pediatric QRM abdomen and thorax phantoms for clinical thorax and abdomen examination scanning parameters and using the Catphan 600 phantom for head examination scanning parameters. The performance of each CT systems was evaluated individually using conventional filtered back-projection (FBP) and IR algorithm employed in that system. Noise, contrast-to-noise ratio (CNR), inverse image quality figure (IQFinv), modulation transfer function (MTF) and noise power spectrum (NPS) were assessed for FBP and wide range of iteration level of different IR algorithms. Figure of Merit (FOM) parameter was calculated to characterize the dose efficiency of each CT system. The CTDIvol values were changed from 20.6 to 45.7, 0.9 to 7.4 and 2.4–9.6 mGy for pediatric head, thorax and abdomen scanning protocols between CT systems, respectively. With increasing iteration level, image noise decreased while CNR and IQFinv increased. NPS peak was decreased with increasing iteration level for both two (2D) and three dimensional (3D) NPS and the ratio of the 3D NPS to 2D NPS varied from 4.5 to 8.3 for pediatric head, from 4.6 to 8.7 for pediatric thorax and from 4.0 to 14.0 for pediatric abdomen scanning protocols. For all IR algorithms employed with CT systems used in this study, the FOM values were increased with increasing iteration level. © 2024 Elsevier Ltd, Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, TÜBİTAK: 122F015; Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, TÜBİTAK

The cost of floating wind turbines (FWTs) is currently higher than onshore and bottom fixed offshore wind turbines. An important step towards more cost-efficient FWT structures is understanding the uncertainties and how they affect the design performance. On the path towards developing a fully probabilistic design approach, an important initial step is defining the variables and uncertainties that significantly impact the final design performance. This study aims to conduct a design sensitivity analysis on a FWT system consisting of the VolturnUS Semisubmersible floater coupled with an IEA 15 MW turbine. First, a Python-based design evaluation framework is implemented that computes operational limit states as a function of design input parameters defining the floater design. The system responses and the loads are obtained using Horizontal Axis Wind turbine simulation Code 2nd generation (HAWC2). Time domain outputs of the design evaluation framework are compared to a frequency domain response using Quick Load Analysis of Floating Wind Turbines (QuLAF). Initial results provide that buoyancy column diameter and the floater radius have the highest effects on the general floater response.