Search

Nanotopographic surfaces are proven to be successful in killing bacterial cells upon contact. This non-chemical bactericidal property has paved an alternative way of fighting bacterial colonization and associated problems, especially the issue of bacteria evolving resistance against antibiotic and antiseptic agents. Recent advancements in nanotopographic bactericidal surfaces have made them suitable for many applications in medical and industrial sectors. The bactericidal effect of nanotopographic surfaces is classically studied under static conditions, but the actual potential applications do have fluid flow in them. In this study, we have studied how fluid flow can affect the adherence of bacterial cells on nanotopographic surfaces. Gram-positive and Gram-negative bacterial species were tested under varying fluid flow rates for their retention and viability after flow exposure. The total number of adherent cells for both species was reduced in the presence of flow, but there was no flowrate dependency. There was a significant reduction in the number of live cells remaining on nanotopographic surfaces with an increasing flowrate for both species. Conversely, we observed a flowrate-independent increase in the number of adherent dead cells. Our results indicated that the presence of flow differentially affected the adherent live and dead bacterial cells on nanotopographic surfaces. This could be because dead bacterial cells were physically pierced by the nano-features, whereas live cells adhered via physiochemical interactions with the surface. Therefore, fluid shear was insufficient to overcome adhesion forces between the surface and dead cells. Furthermore, hydrodynamic forces due to the flow can cause more planktonic and detached live cells to collide with nano-features on the surface, causing more cells to lyse. These results show that nanotopographic surfaces do not have self-cleaning ability as opposed to natural bactericidal nanotopographic surfaces, and nanotopographic surfaces tend to perform better under flow conditions. These findings are highly useful for developing and optimizing nanotopographic surfaces for medical and industrial applications.

Adverse cutaneous reactions are potentially life-threatening skin side effects caused by drugs administered into the human body. The availability of a human-specific

Bacterial colonization on solid surfaces creates enormous problems across various industries causing billions of dollars' worth of economic damages and costing human lives. Biomimicking nanostructured surfaces have demonstrated a promising future in mitigating bacterial colonization and related issues. The importance of this non-chemical method has been elevated due to bacterial evolvement into antibiotic and antiseptic-resistant strains. However, bacterial attachment and viability on nanostructured surfaces under fluid flow conditions has not been investigated thoroughly. In this study, attachment and viability of

Endothelial Cells (ECs) form cohesive cellular lining of the vasculature and play essential roles in both developmental processes and pathological conditions. Collective migration and proliferation of endothelial cells (ECs) are key processes underlying endothelialization of vessels as well as vascular graft, but the complex interplay of mechanical and biochemical signals regulating these processes are still not fully elucidated. While surface topography and biochemical modifications have been used to enhance endothelialization in vitro, thus far such single-modality modifications have met with limited success. As combination therapy that utilizes multiple modalities has shown improvement in addressing various intractable and complex biomedical conditions, here, we explore a combined strategy that utilizes topographical features in conjunction with pharmacological perturbations. We characterized EC behaviors in response to micrometer-scale grating topography in concert with pharmacological perturbations of endothelial adherens junctions (EAJ) regulators. We found that the protein tyrosine phosphatase, PTP1B, serves as a potent regulator of EAJ stability, with PTP1B inhibition synergizing with grating topographies to modulate EAJ rearrangement, thereby augmenting global EC monolayer sheet orientation, proliferation, connectivity, and collective cell migration. Our data delineates the crosstalk between cell-ECM topography sensing and cell-cell junction integrity maintenance and suggests that the combined use of grating topography and PTP1B inhibitor could be a promising strategy for promoting collective EC migration and proliferation.

Abnormal neuronal networks arising from perturbations during early brain development contribute to neurodevelopmental disorders. Mutations and deletions of human Fasciculation and Elongation Protein Zeta 1 (FEZ1) are found in schizophrenia and Jacobsen syndrome patients. However, its roles in human brain development and manifestation of clinical pathological symptoms remain unknown. Here, using human cerebral organoids (hCOs), we observed that FEZ1 expression is turned on early during brain development and is detectable in both neuroprogenitor subtypes and immature neurons. Deletion of FEZ1 disrupts expression of genes involved in neuronal and synaptic development. Using single-cell RNA sequencing, we further uncovered an abnormal expansion of homeodomain-only protein homeobox (HOPX)− outer radial glia (oRG) in FEZ1-null hCOs, occurring at the expense of HOPX+ oRG. HOPX− oRGs show higher cell mobility as compared to HOPX+ oRGs, which is accompanied by the ectopic localization of the neuroprogenitors to the outer layer of FEZ1-null hCOs. Moreover, abnormal encroachment of TBR2+ intermediate progenitors into CTIP2+ deep layer neurons indicated that cortical layer formation is disrupted in FEZ1-null hCOs. Collectively, our findings highlight the involvement of FEZ1 in early cortical brain development and how it contributes to neurodevelopmental disorders.

Organs-on-chips (OoCs) are systems containing engineered or natural miniature tissues grown inside microfluidic chips. To better mimic human physiology, the chips are designed to control cell microenvironments and maintain tissue-specific functions. Combining advances in tissue engineering and microfabrication, OoCs have gained interest as a next-generation experimental platform to investigate human pathophysiology and the effect of therapeutics in the body. There are as many examples of OoCs as there are applications, making it difficult for new researchers to understand what makes one OoC more suited to an application than another. This Primer is intended to give an introduction to the aspects of OoC that need to be considered when developing an application-specific OoC. The Primer covers guiding principles and considerations to design, fabricate and operate an OoC, as well as subsequent assaying techniques to extract biological information from OoC devices. Alongside this is a discussion of current and future applications of OoC technology, to inform design and operational decisions during the implementation of OoC systems.

This chapter provides an overview of the science, engineering, and design methods required in the development of micro/nanofluidic devices. Section 2 provides the scientific background of fluid mechanics and physical phenomena in micro/nanoscale. Section 3 gives a brief overview of the existing fabrication techniques employed in micro/nanofluidics. The techniques are grouped into three categories: (1) subtractive manufacturing, (2) formative manufacturing, and (3) additive manufacturing. The advantages and disadvantages of each manufacturing technique are also discussed. Implementation of the fluidic devices beyond laboratory demonstrations is not trivial, which requires a good understanding of the problems of interest and the end-users. To that end, Section 4 introduces the design thinking approach and its application to develop micro/nanofluidic devices. Finally, Section 5 concludes the chapter with future outlooks.

Anatomically and biologically relevant vascular models are critical to progress our understanding of cardiovascular diseases (CVDs) that can lead to effective therapies. Despite advances in 3D bioprinting, recapitulating complex architectures (i.e., freestanding, branching, multilayered, perfusable) of a cell-laden vascular construct remains technically challenging, and the development of new techniques that can recapitulate both anatomical and biological features of blood vessels is of paramount importance. In this work, we introduce a unique, microfluidics-enabled molding technique that allows us to fabricate anatomically-relevant, cell-laden hydrogel vascular models. Our approach employed 3D-printed porous molds of poly(ethylene glycol) diacrylate (PEGDA) as templates to cast alginate-containing bioinks. Due to the porous and aqueous nature of the PEGDA mold, the calcium ion (Ca2+) was diffusively released to crosslink the bioinks to create hollow structures. Applying this technique, multiscale, multilayered vascular constructs that were freestanding and perfusable were readily fabricated using cell-compatible bioinks (i.e., alginate and gelatin methacryloyl (GelMA)). The bioinks were also readily customizable to either improve the compatibility with specific vascular cells or tune the mechanical modulus to mimic native blood vessels. Importantly, we successfully integrated smooth muscle cells and endothelial cells in a biomimetic organization within our vessel constructs and demonstrated a significant increase in monocyte adhesion upon stimulation with an inflammatory cytokine, tumor necrosis factor-alpha (TNF-α). We also demonstrated that the fabricated vessels were amenable for testing percutaneous coronary interventions (i.e., drug-eluting balloons and stents) under physiologically-relevant mechanical states, such as vessel stretching and bending. Overall, we introduce a versatile fabrication technique with multi-faceted possibilities of generating biomimetic vascular models that can benefit future research in mechanistic understanding of CVD progression and the development of therapeutic interventions.

The development of antimicrobial nanofibre dressings that can protect the injured tissues from commensal pathogens while promoting tissue regeneration finds enormous potential in plastic and reconstructive surgery practices. To achieve this goal, we investigated the effect of chondroitin sulphate on the morphology, mechanical properties, wettability and biocompatibility of polydopamine crosslinked electrospun gelatin nanofibres containing mineralized magnesium. To extend the durability of dressings, we prepared composite dressings containing polycaprolactone (PCL) and gelatin as blend or core-shell nanofibres. Nanofibre blends presented greater tensile strength and stretchability, while core-shell nanofibres displayed superior photoluminescent properties. In a porcine model of cutaneous burn injury, both the blend and core-shell nanofibre dressings displayed improved re-epithelialization, wound closure and clinical outcome in comparison to untreated burns. Histology of the biopsied tissues indicated smooth regeneration and collagen organization of the burns treated with core-shell nanostructures than untreated burns. This study compared the physico-chemical and biological properties of composite nanofibres that are capable of accelerating burn wound healing and possess antimicrobial properties, highlighting their potential as wound dressings and skin substitutes.

The clinical use of some drugs, such as carbamazepine, phenytoin, and allopurinol, is often associated with adverse cutaneous reactions. The bioactivation of drugs into immunologically reactive metabolites by the liver is postulated to be the first step in initiating a downstream cascade of pathological immune responses. Current mechanistic understanding and the ability to predict such adverse drug cutaneous responses have been partly limited by the lack of appropriate cutaneous drug bioactivation experimental models. Although in vitro human liver models have been extensively investigated for predicting hepatotoxicity and drug–drug interactions, their ability to model the generation of antigenic reactive drug metabolites that are capable of eliciting immunological reactions is not well understood. Here, we employed a human progenitor cell (HepaRG)-derived hepatocyte model and established highly sensitive liquid chromatography-mass spectrometry analytical assays to generate and quantify different reactive metabolite species of three paradigm skin sensitizers, namely, carbamazepine, phenytoin, and allopurinol. We found that the generation of reactive drug metabolites by the HepaRG-hepatocytes was sensitive to the medium composition. In addition, a functional assay based on the activation of U937 myeloid cells into the antigen-presenting cell (APC) phenotype was established to evaluate the immunogenicity potential of the reactive drug metabolites produced by HepaRG-derived hepatocytes. We showed that the reactive drug metabolites of known skin sensitizers could significantly upregulate IL8, IL1β, and CD86 expressions in U937 cells compared to the metabolites from a nonskin sensitizer (i.e., acetaminophen). Thus, the extent of APC activation by HepaRG-hepatocytes conditioned medium containing reactive drug metabolites can potentially be used to predict their skin sensitization potential.

Certain organ-on-a-chip (OoC) systems have been validated to show superior predictive capabilities compared to planar, static cell cultures, and animal models for drug evaluations. One of the ongoing initiatives led by OoC developers is bridging the academia-to-industry gap in hope of gaining wider adoption by end-users: academic biological researchers and industry. In this article, we discuss several recommendations that can help drive the translation of OoC in the market. We first lay out some of the key challenges faced by OoC developers before highlighting some of the existing advances in OoC platforms. Thereafter, we suggest recommendations that OoC developers can deliberate for the translation of OoC into the industry.

The generation of structurally standardized human pluripotent stem cell (hPSC)‐derived neural embryonic tissues has the potential to model genetic and environmental mediators of early neurodevelopmental defects. Current neural patterning systems have so far focused on directing cell fate specification spatio‐temporally but not morphogenetic processes. Here, the formation of a structurally reproducible and highly‐organized neuroepithelium (NE) tissue is directed from hPSCs, which recapitulates morphogenetic cellular processes relevant to early neurulation. These include having a continuous, polarized epithelium and a distinct invagination‐like folding, where primitive ectodermal cells undergo E‐to‐N‐cadherin switching and apical constriction as they acquire a NE fate. This is accomplished by spatio‐temporal patterning of the mesoendoderm, which guides the development and self‐organization of the adjacent primitive ectoderm into the NE. It is uncovered that TGFβ signaling emanating from endodermal cells support tissue folding of the prospective NE. Evaluation of NE tissue structural dysmorphia, which is uniquely achievable in the model, enables the detection of apical constriction and cell adhesion dysfunctions in patient‐derived hPSCs as well as differentiating between different classes of neural tube defect‐inducing drugs., This paper reports the generation of a reproducible and highly organized neuroepithelial (NE) tissue by combining human pluripotent stem cell (hPSC) micropatterning and a temporally sequenced induction protocol to specify NE cells in spatial juxtaposition to mesoendoderm cells. By evaluating NE tissue structural dysmorphia in the micropatterned NE model, we can successfully model gene‐ and drug‐induced neurodevelopmental defects.

Most craniofacial bones are derived from the ectodermal germ layer via neural crest stem cells, which are distinct from mesoderm-derived long bones. However, current craniofacial bone tissue engineering approaches do not account for this difference and utilize mesoderm-derived bone marrow mesenchymal stem cells (BM-MSCs) as a paradigm cell source. The effect of the embryonic origin (ontogeny) of an MSC population on its osteogenic differentiation potential and regenerative ability still remains unresolved. To clarify the effects of MSC ontogeny on bone regenerative ability, we directly compared the craniofacial bone regenerative abilities of an ecto-mesenchymal stem cell (eMSC) population, which is derived from human embryonic stem cells via a neural crest intermediate, with mesodermal adult BM-MSCs. eMSCs showed comparable osteogenic and chondrogenic ability to BM-MSCs in 2-D in vitro culture, but lower adipogenic ability. They exhibited greater proliferation than BM-MSCs and comparable construct mineralization in a well-established 3-D polycaprolactone-tricalcium phosphate (PCL-TCP) scaffold system in vitro. eMSC-derived 3D osteogenic constructs were maintained for longer in a proliferative osteoblast state and exhibited differential levels of genes related to fibroblast growth factor (FGF) signaling compared to BM-MSCs. Although both eMSC and BM-MSC-seeded scaffold constructs could promote bone regeneration in a rat calvarial defect model, eMSC-derived osseous constructs had significantly higher cellularity due to increased number of proliferative (Ki67+) cells than those seeded with BM-MSCs, and exhibited enhanced new bone formation in the defect area as compared to untreated controls. Overall, our study demonstrates the potential of human eMSCs for future clinical use in craniofacial regeneration applications and indicates the importance of considering MSC origin when selecting an MSC source for regenerative applications.

Microfluidic 3D tissue culture systems are attractive for in vitro drug testing applications due to the ability of these platforms to generate 3D tissue models and perform drug testing at a very small scale. However, the minute cell number and liquid volume impose significant technical challenges to perform quantitative cell viability measurements using conventional colorimetric or fluorometric assays, such as MTS or Alamar Blue. Similarly, live-dead staining approaches often utilize metabolic dyes that typically label the cytoplasm of live cells, which makes it difficult to segment and count individual cells in compact 3D tissue cultures. In this paper, we present a quantitative image-based cell viability (QuantICV) assay technique that circumvents current challenges of performing the quantitative cell viability assay in microfluidic 3D tissue cultures. A pair of cell-impermeant nuclear dyes (EthD-1 and DAPI) were used to sequentially label the nuclei of necrotic and total cell populations, respectively. Confocal microscopy and image processing algorithms were employed to visualize and quantify the cell nuclei in the 3D tissue volume. The QuantICV assay was validated and showed good concordance with the conventional bulk MTS assay in static 2D and 3D tumor cell cultures. Finally, the QuantICV assay was employed as an on-chip readout to determine the differential dose responses of parental and metastatic 3D oral squamous cell carcinoma (OSCC) to Gefitinib in a microfluidic 3D culture device. This proposed technique can be useful in microfluidic cell cultures as well as in a situation where conventional cell viability assays are not available.

The mechanical properties and biocompatibility of nanocomposites composed of Acrylated Epoxidized Soybean Oil (AESO), nano-Hydroxyapatite (nHA) rods and either 2-Hydroxyethyl Acrylate (HEA) or Polyethylene Glycol Diacrylate (PEGDA) and 3D printed using extrusion-based additive manufacturing methods were investigated. The effects of addition of HEA or PEGDA on the rheological, mechanical properties and cell-biomaterial interactions were studied. AESO, PEGDA (or HEA), and nHA were composited using an ultrasonic homogenizer and scaffolds were 3D printed using a metal syringe on an extrusion-based 3D printer while simultaneously UV cured during layer-by-layer deposition. Nanocomposite inks were characterized for their viscosity before curing, and dispersion of the nHA particles and tensile mechanical properties after curing. Proliferation and differentiation of human bone marrow-derived mesenchymal stem cells (BM-MSCs) were studied by seeding cells onto the scaffolds and culturing in osteogenic differentiation medium for 7, 14 and 21 days. Overall, each of the scaffolds types demonstrated controlled morphology resulting from the printability of nanocomposite inks, well-dispersed nHA particles within the polymer matrices, and were shown to support cell proliferation and osteogenic differentiation after 14 and 21 days of culture. However, the nature of the functional groups present in each ink detectably affected the mechanical properties and cytocompatibility of the scaffolds. For example, while the incorporation of HEA reduced nHA dispersion and tensile strength of the final nanocomposite, it successfully enhanced shear yield strength, and printability, as well as cell adhesion, proliferation and osteogenic differentiation, establishing a positive effect perhaps due to additional hydrogen bonding.

Drug-induced skin sensitization is prevalent worldwide and can trigger life-threatening health conditions, such as Stevens Johnson Syndrome. However, existing in vitro skin models cannot adequately predict the skin sensitization effects of drugs administered into the systemic circulation because dermal inflammation and injury are preceded by conversion of parent drugs into antigenic reactive metabolites in the liver and subsequent activation of the immune system. Here, we demonstrate that recapitulation of these early tandem cellular processes in a compartmentalized liver-immune coculture array is sufficient to predict the skin sensitization potential of systemic drugs. Human progenitor cell (HepaRG)-derived hepatocyte spheroids and U937 myeloid cells, a representative antigen presenting cell (APC), can maintain their respective functions in 2 concentric micro-chambers, which are connected by a diffusion microchannel network. Paradigm drugs that are reported to cause severe cutaneous drug reactions (i.e. carbamazepine, phenytoin and allopurinol) can be metabolized into their reactive metabolites, which diffuse efficiently into the adjoining immune compartment within a 48 hour period. By measuring the extent of U937 activation as indicated by IL8, IL1β and CD86 upregulation upon drug administration, we show that the liver-immune coculture array more consistently and reliably distinguish all 3-paradigm skin sensitizing drugs from a non-skin sensitizer than conventional bulk Transwell coculture. Given its miniaturized format, design simplicity and prediction capability, this novel in vitro system can be readily scaled into a screenable platform to identify the skin sensitization potential of systemically-administered drugs.

The practical application of microfluidic liver models for in vitro drug testing is partly hampered by their reliance on human primary hepatocytes, which are limited in number and have batch-to-batch variation. Human stem cell-derived hepatocytes offer an attractive alternative cell source, although their 3D differentiation and maturation in a microfluidic platform have not yet been demonstrated. We develop a pump-free microfluidic 3D perfusion platform to achieve long-term and efficient differentiation of human liver progenitor cells into hepatocyte-like cells (HLCs). The device contains a micropillar array to immobilize cells three-dimensionally in a central cell culture compartment flanked by two side perfusion channels. Constant pump-free medium perfusion is accomplished by controlling the differential heights of horizontally orientated inlet and outlet media reservoirs. Computational fluid dynamic simulation is used to estimate the hydrostatic pressure heads required to achieve different perfusion flow rates, which are experimentally validated by micro-particle image velocimetry, as well as viability and functional assessments in a primary rat hepatocyte model. We perform on-chip differentiation of HepaRG, a human bipotent progenitor cell, and discover that 3D microperfusion greatly enhances the hepatocyte differentiation efficiency over static 2D and 3D cultures. However, HepaRG progenitor cells are highly sensitive to the time-point at which microperfusion is applied. Isolated HepaRG cells that are primed as static 3D spheroids before being subjected to microperfusion yield a significantly higher proportion of HLCs (92%) than direct microperfusion of isolated HepaRG cells (62%). This platform potentially offers a simple and efficient means to develop highly functional microfluidic liver models incorporating human stem cell-derived HLCs. Biotechnol. Bioeng. 2017;114: 2360-2370. © 2017 Wiley Periodicals, Inc.

Human pluripotent stem cell (hPSC) is a great resource for generating cell derivatives for drug efficiency testing. Metabolites of nutraceuticals can exert anti-inflammatory effects on blood vessels. However, the concentration of nutraceutical metabolites produced in hPSC-derived hepatocytes (hPSC-HEPs) is usually low. To enable the detection of these metabolites under the in vitro environment, we have developed a co-culture model consisting of parallel co-culture chambers and a recirculating microfluidic system with minimum fluid volume, optimal cell culture environment. The model allows cells to be exposed continuously to nutraceutical metabolites. In this perfused culturing model, hPSC-derived endothelial cells and hPSC-HEPs are co-cultured without physical contact. When an anti-inflammatory nutraceutical, quercetin, was administrated to the co-culture, higher levels of quercetin metabolites were detected on-chip compared with static control. We further induced inflammation with Interleukin-1β in the co-culture model and measured interleukin 8 (IL-8) generation. The IL-8 level was suppressed more significantly by quercetin metabolites in the perfusion co-culture, as compared to static culture. This is due to enhanced metabolites production on-chip. This microfluidic co-culture model enables in vitro screening of nutraceuticals using hPSC-derived cells. Agency for Science, Technology and Research (A*STAR) Ministry of Education (MOE) Nanyang Technological University National Medical Research Council (NMRC) National Research Foundation (NRF) Published version This work was supported in part by IBN, grants from JCO, A*STAR and MBI (NRF and MOE), NMRC-CBRG, SMART-BioSyM, NUHS to H.Y. C.C.'s research is supported by the School of Medicine, NTU Nanyang Assistant Professorship Grant and A*STAR JCO Grant.

RationaleFailure of small synthetic vascular grafts is largely due to late endothelialization and has been an ongoing challenge in the treatment of cardiovascular diseases.ObjectivePrevious strategies developed to promote graft endothelialization include surface topographical modulation and biochemical modifications. However, these have been met with limited success. Importantly, although the integrity of Endothelial Cell (EC) monolayer is crucial for endothelialization, the crosstalk between surface topography and cell-cell connectivity is still not well understood. Here we explored a combined strategy that utilizes both topographical features and pharmacological perturbations.Methods and resultWe characterized EC behaviors in response to micron-scale grating topography in conjunction with pharmacological perturbations of endothelial adherens junctions (EAJ) regulators. We studied the EA.hy 926 cell-cell junctions and monolayer integrity using the junctional markers upon the inhibitory effect of EAJ regulator on both planar and grating topographies substrates.We identified a protein tyrosine phosphatase, PTP1B, as a potent regulator of EAJ stability. Next, we studied the physiologically relevant behaviors of EC using primary human coronary arterial endothelial cells (HCAEC). Our results showed that PTP1B inhibition synergized with grating topographies to modulate EAJ rearrangement, thereby controlling global EC monolayer sheet orientation, connectivity and collective cell migration to promote endothelialization.Our results showed that PTP1B inhibition synergized with grating topographies to modulate EAJ rearrangement, thereby controlling global EC monolayer sheet orientation, connectivity and collective cell migration and proliferation.ConclusionThe synergistic effect of PTP1B inhibition and grating topographies could be useful for the promotion of endothelialization by enhancing EC migration and proliferation.

Mesenchymal stem cells (MSCs) are multipotent stromal cells, with the ability to differentiate into mesodermal (e.g., adipocyte, chondrocyte, hematopoietic, myocyte, osteoblast), ectodermal (e.g., epithelial, neural) and endodermal (e.g., hepatocyte, islet cell) lineages based on the type of induction cues provided. As compared to embryonic stem cells, MSCs hold a multitude of advantages from a clinical translation perspective, including ease of isolation, low immunogenicity and limited ethical concerns. Therefore, MSCs are a promising stem cell source for different regenerative medicine applications. The in vitro differentiation of MSCs into different lineages relies on effective mimicking of the in vivo milieu, including both biochemical and mechanical stimuli. As compared to other biophysical cues, such as substrate stiffness and topography, the role of fluid shear stress (SS) in regulating MSC differentiation has been investigated to a lesser extent although the role of interstitial fluid and vascular flow in regulating the normal physiology of bone, muscle and cardiovascular tissues is well-known. This review aims to summarise the current state-of-the-art regarding the role of SS in the differentiation of MSCs into osteogenic, cardiovascular, chondrogenic, adipogenic and neurogenic lineages. We will also highlight and discuss the potential of employing SS to augment the differentiation of MSCs to other lineages, where SS is known to play a role physiologically but has not yet been successfully harnessed for in vitro differentiation, including liver, kidney and corneal tissue lineage cells. The incorporation of SS, in combination with biochemical and biophysical cues during MSC differentiation, may provide a promising avenue to improve the functionality of the differentiated cells by more closely mimicking the in vivo milieu.

Multi-organ perfusion systems offer the unique opportunity to mimic different physiological systemic interactions. However, existing multi-organ culture platforms have limited flexibility in specifying the culture conditions, device architectures, and fluidic connectivity simultaneously. Here, we report a modular microfluidic platform that addresses this limitation by enabling easy conversion of existing microfluidic devices into tissue and fluid control modules with self-aligning magnetic interconnects. This enables a 'stick-n-play' approach to assemble planar perfusion circuits that are amenable to both bioimaging-based and analytical measurements. A myriad of tissue culture and flow control TILE modules were successfully constructed with backward compatibility. Finally, we demonstrate applications in constructing recirculating multi-organ systems to emulate liver-mediated bioactivation of nutraceuticals and prodrugs to modulate their therapeutic efficacies in the context of atherosclerosis and cancer. This platform greatly facilitates the integration of existing organs-on-chip models to provide an intuitive and flexible way for users to configure different multi-organ perfusion systems.

In article number 2001100, Yi‐Chin Toh and co‐workers combine hPSC micropatterning and a temporally‐sequenced induction protocol to specify neuroepithelial (NE) cells in spatial juxtaposition to mesoendoderm cells. This results in the formation of a reproducible and highly‐organized NE tissue. By evaluating NE tissue structural dysmorphia in the micropatterned NE model, gene‐ and drug‐induced neurodevelopmental defects can be successfully modelled. [Image: see text]