Search

Directional charge transfer in TiO2 nanosheets is achieved by design of TiO2 lattice-Ti vacancy-interlayered sp2 carbon at the interface.

The spatial n–p homojunction design in TiO2 greatly enhances its photocatalytic H2 production performance owing to the directed charge transfer.

Uncovering an efficient and stable photocatalytic system for seawater splitting is a highly desirable but challenging goal. Herein, Cd0.2Zn0.8S@Silicalite-1 (CZS@S-1) composites, in which CZS is embedded in the hierarchical zeolite S-1, were prepared and show remarkably high activity, stability and salt resistance in seawater.

IntroductionGuidelines for hip fracture care state that patients with hip fracture should be mobilised on the day after surgery and at least once a day thereafter. However, compliance with these guidelines is poor. One approach that would assist physiotherapists to meet mobility guidelines after hip fracture is to delegate the provision of daily mobilisation to allied health assistants under their supervision. Therefore, we plan to conduct a randomised controlled trial to determine the feasibility of an allied health assistant providing daily inpatient rehabilitation to patients with hip fracture.Methods and analysisUsing a parallel group randomised controlled design with one-to-one allocation, participants will be randomly allocated to an experimental group (allied health assistant management) or a comparison group (physiotherapist management). Inclusion criteria are: adult with diagnosis of hip fracture; inpatient in acute hospital; walked independently pre-hip fracture and able to communicate in conversational English. The experimental group will receive routine physiotherapy rehabilitation, including daily mobilisation, from an allied health assistant following initial physiotherapist assessment. The comparison group will receive routine rehabilitation from a physiotherapist. The primary outcome will be the feasibility of allied health assistant management of patients with hip fracture. Feasibility will be determined using the following areas of focus in Bowen’s feasibility framework: acceptability (patient satisfaction), demand (proportion of patients who participate), implementation (time allied health assistant/physiotherapist spends with participant, occasions of service) and practicality (cost, adverse events). Staff involved in the implementation of allied health assistant care will be interviewed to explore their perspectives on feasibility. Secondary outcomes include compliance with daily mobilisation guidelines, discharge destination, hospital readmission, falls, functional activity and length of stay. We aim to recruit 50 participants. Descriptive statistics will be used to describe feasibility and mobilisation rates will be calculated using Cox proportional hazards regression to compare compliance with mobilisation guidelines.Ethics and disseminationEthics approval was obtained from the Peninsula Health human research ethics committee (HREC/63 005/PH-2020). The findings will be disseminated in peer-reviewed journals and conference presentations.Trail registration numberAustralian and New Zealand Clinical Trial Registry; ACTRN12620000877987; Pre-results.

Osteosarcoma (OS) is rare cancer with bimodal age distribution with peaks observed in children and young adults. Typically, OS is treated with pre-surgery neoadjuvant therapy, surgical excision, and post-surgery chemotherapy. However, the efficacy of treatment on disease prognosis and objective response is not currently optimal, often resulting in drug resistance; in turn, highlighting the need to understand mechanisms driving resistance to therapy in OS patients. Using Doxycycline (Dox)-sensitive and resistant variants of OS cells lines KHOS and U2OS, we found that the resistant variants KHOS-DR and U2OS-DR have significantly higher in vitro proliferation. Treating the Dox-sensitive KHOS/U2OS cells with exosomes isolated from KHOS-DR/U2OS-DR made them resistant to treatment with Dox in vitro and in vivo and enhanced tumor growth and progression, while decreasing overall survival. Expression of the long non-coding RNA (lncRNA) ANCR was significantly higher in the KHOS-DR and U2OS-DR variants. SiRNA-mediated knockdown of ANCR decreased in vitro proliferation, while increasing sensitivity to Dox treatment in the KHOS-DR/U2OS-DR cells. Expression of the exosomal lncRNA ANCR was critical for drug resistance and OS tumor progression in xenografts and was correlated to resistance to Adriamycin and overall survival is patients with OS. These results establish lncRNA ANCR as a critical mediator of resistance to therapy in OS patients, highlighting it as a potential therapeutic target in OS patients.

Objectives Significant variability exists in physical rehabilitation modalities and dosage used in the ICU. Our objective was to investigate the effect of physical rehabilitation in ICU on patient outcomes, the impact of task-specific training, and the dose-response profile. Data sources A systematic search of Ovid MEDLINE, Cochrane Library, EMBASE, and CINAHL plus databases was undertaken on the May 28, 2020. Study selection Randomized controlled trials and controlled clinical trials investigating physical rehabilitation commencing in the ICU in adults were included. Outcomes included muscle strength, physical function, duration of mechanical ventilation, ICU and hospital length of stay, mortality, and health-related quality of life. Two independent reviewers assessed titles, abstracts, and full texts against eligibility criteria. Data extraction Details on intervention for all groups were extracted using the template for intervention description and replication checklist. Data synthesis Sixty trials were included, with a total of 5,352 participants. Random-effects pooled analysis showed that physical rehabilitation improved physical function at hospital discharge (standardized mean difference, 0.22; 95% CI, 0.00-0.44), reduced ICU length of stay by 0.8 days (mean difference, -0.80 d; 95% CI, -1.37 to -0.23 d), and hospital length of stay by 1.75 days (mean difference, -1.75 d; 95% CI, -3.03 to -0.48 d). Physical rehabilitation had no impact on the other outcomes. The intervention was more effective in trials where the control group received low-dose physical rehabilitation and in trials that investigated functional exercises. Conclusions Physical rehabilitation in the ICU improves physical function and reduces ICU and hospital length of stay. However, it does not appear to impact other outcomes.

Activin A is a potent negative regulator of muscle mass elevated in critical illness. It is unclear whether muscle strength and physical function in critically ill humans are associated with elevated activin A levels.The objective of this study was to investigate the relationship between serum activin A levels, muscle strength, and physical function at discharge from the intensive care unit (ICU) and hospital.Thirty-six participants were recruited from two tertiary ICUs in Melbourne, Australia. Participants were included if they were mechanically ventilated for48 h and expected to have a total ICU stay of5 days. The primary outcome measure was the Six-Minute Walk Test distance at hospital discharge. Secondary outcome measures included handgrip strength, Medical Research Council Sum Score, Physical Function ICU Test Scored, Six-Minute Walk Test, and Timed Up and Go Test assessed throughout the hospital admission. Total serum activin A levels were measured daily in the ICU.High peak activin A was associated with worse Six-Minute Walk Test distance at hospital discharge (linear regression coefficient, 95% confidence interval, p-value: -91.3, -154.2 to -28.4, p = 0.007, respectively). Peak activin A concentration was not associated with the secondary outcome measures.Higher peak activin A may be associated with the functional decline of critically ill patients. Further research is indicated to examine its potential as a therapeutic target and a prospective predictor for muscle wasting in critical illness.ACTRN12615000047594.

To assess the effectiveness and safety of Traditional Chinese patent medicines (TCPMs) for managing impaired glucose tolerance (IGT).Seven databases were searched to identify eligible trials published from incepting to May 1, 2016. Randomized controlled trials (RCTs) involving TCPM for IGT with a minimum follow-up duration of 6 months were included for analysis. Data extraction and quality assessment were performed by two reviewers independently. Data synthesis was analyzed using Review Manager 5.3 software. Subgroup analysis was carried out to assess the robustness of results of meta-analysis.Eighteen trials with a total of 3172 participants met the inclusion criteria. The methodological quality of the RCTs was variable. Comparing with receiving lifestyle modification (LM) alone, TCPM plus LM was significantly better at reducing the incidence of diabetes (risk ratio [RR] 0.45; 95% confidence interval [CI] 0.36-0.57, p 0.00001) and normalizing the blood glucose (RR 0.72; 95% CI 0.64-0.82, p 0.00001). TCPM plus LM was superior in decreasing the levels of 2hPG, body mass index (BMI), fasting insulin, and 2 h insulin compared with LM alone (2hPG: mean difference [MD] -1.13; 95% CI -1.68 to -0.58, p 0.0001; BMI: MD -0.42; 95% CI -0.71 to -0.14, p = 0.004; fasting insulin: MD -2.44; 95% CI -3.79 to -1.09, p = 0.0004; and 2 h insulin: MD -8.26; 95% CI -8.47 to -8.05, p 0.00001). Compared with placebo plus LM, TCPM plus LM was superior in reducing diabetes (RR 0.54; 95% CI 0.42-0.69, p 0.00001) and normalizing blood glucose (RR 0.55; 95% CI 0.41-0.73, p 0.00001; the interventions were also associated with a decline in the two-hour postprandial blood glucose (2hPG) levels (MD -1.45; 95% CI -2.11 to -0.79, p 0.0001) and BMI levels (MD -1.12; 95% CI -2.00 to -0.24, p 0.0001). There were no significant differences in adverse events between two groups. Subgroup analysis found no significant difference in overall effects among all study characteristics, indicating that the overall effects were stable.The study indicated that TCPM combined with moderate lifestyle modification had significant effect on IGT. Further studies are needed to provide more reliable evidence. The PROSPERO registration is No. CRD42016039312.

Hosted by volcaniclastics of the Carboniferous Dahalajunshan Formation, the Songhu iron deposit is located in the central segment of the Awulale metallogenic belt, Chinese Western Tianshan. Mineralization and alteration are structurally controlled by orogen-parallel NWW-striking faults. Integrating with mineralogical and stable isotopic analyses based on paragenetic relationships, two types of iron mineralization have been identified. The deuteric mineralization (Type I) represented by brecciated, banded, and disseminated-vein ores juxtaposed with potassic–calcic alteration in the inner zone, which was formed from a magmatic fluid generated during the late stages of regional volcanism. In contrast, the volcanic-hydrothermal mineralization (Type II) is characterized by hydrothermal features occurring in massive and agglomerated ores with abundant sulfides, and was generated from the magmatic fluid with seawater contamination. Two volcaniclastic samples from the hanging and footwall of the main orebody yield zircon U–Pb ages of 327.8 ± 3.1 and 332.0 ± 2.0 Ma, respectively, which indicate Middle Carboniferous volcanism. Timing for iron mineralization can be broadly placed in the same epoch. By reviewing geological, mineralogical, and geochemical features of the primary iron deposits in the Awulale metallogenic belt, we propose that the two types of iron mineralization in the Songhu iron deposit are representative regionally. A summary of available geochronological data reveals Middle–Late Carboniferous polycyclic ore-related volcanism, and nearly contemporaneous iron mineralization along the belt. Furthermore, petro-geochemistry of volcanic–volcaniclastic host rocks indicates that partial melting of a metasomatized mantle wedge under a continental arc setting could have triggered the continuous volcanic activities and associated metallogenesis.

Purpose To investigate the usefulness of three-dimensional (3D) printing in complex spinal surgery. Methods The study was conducted from October 2014 to March 2015 in Shenzhen Second Peoples' Hospital and 4 cases of complex severe spinal disorders were selected from our department. Among them one patient combined with congenital scoliosis, one with atlas neoplasm, one with atlantoaxial dislocation, and the rest one with atlantoaxial fracture-dislocation. The data of the diseased region was collected from computerized tomography scans for 3D digital reconstruction and rapid prototyping to prepare photosensitive resin models, which were applied in the treatment of these cases. Results The use of 3D models reduced operating time and intraoperative blood loss as well as the risk of postoperative complications. Furthermore, no pedicle penetrations or screw misplacement occurred according to the postoperative planar radiographic images. Conclusion The tactile models from 3D printing allow direct observation and measurement, helping the orthopedists to have accurate morphometric information to provide personalized surgical planning and better communication with the patient and coworkers. Moreover, the photosensitive resin models can also guide the actual surgery with the drilling of pedicle screws and safe resection of tumor.

The surface hydroxyl groups in TiO2 are crucial to many of its practical applications, but their controlled synthesis represents still a challenge. Herein, nanostructured TiO2 with rich surface hydroxyl species groups and high crystallinity (TiO2-OH) by high-temperature calcination have been developed by using the ionic liquid. Experimental measurements and theoretical calculations show a strong surface hydroxyl signal of two-dimensional 1H TQ-SQ MAS NMR, as well as clear changes of the charge density of TiO2 with the rich surface hydroxyl species. Moreover, the rich surface hydroxyl species groups in TiO2 not only significantly enhance its performances involving photogenerated current, photocatalysis and energy strorage but also show a bright future on marine applications because of its high activity and stability in simulation seawater. The characteristics and mechanism have been proposed to clarify the generation of surface hydroxyl species of TiO2 and the correponding directed hole-trapping at an atomic-/nanoscale.

Hierarchical structured mesoporous Co3O4/SiO2 composites have been fabricated by the in-situ transformation of cobalt nanocrystals in the mesoporous silica. The hierarchical porous composites show good structural stability during the thermal treating process and demonstrate high crystallinity after phase transformation. The highly crystalline Co3O4/SiO2 composite has uniform mesopores and exhibits good adsorption ability. This method offers a promising way to the design of hierarchical structured mesoporous materials with highly crystalline framework.

Website architecture model is introduced in this paper as a whole, it mainly illuminates design process of three layer architecture model, states characteristics and advantages of layer architecture, demonstrates main points and difficulties of every layer design in detail. The model of website design can be reused by applicating object-oriented concept to website design.

Objective: To assess the early curative effect of epidural or intravenous administration of steroids during a percutaneous endoscopic lumbar discectomy (PELD). Methods: 28 consecutive patients who underwent PELD due to large lumbar disc herniation between November 2014 and January 2016 were followed up for 6 months. These patients were divided into two groups according to the treatment they received after PELD. 14 patients (Group A) were treated by PELD and epidural steroids, while the other 14 patients (Group B) were treated by PELD and intravenous steroids. We evaluated the effectiveness by the preoperative and postoperative visual analogue scale (VAS) scores for back and leg pain, and the postoperative Oswestry disability index (ODI) at 3 weeks after surgery via the clinical charts and telephone interview. Postoperative hospital stay and time return to work were investigated as well. Results: There is a significant decrease in VAS (back, leg), ODI, and time return to work (p

Introduction Despite studies demonstrating benefit, patients with femoral vascular catheters placed for continuous renal replacement therapy are frequently restricted from mobilization. No researchers have reported filter pressures during mobilization, and it is unknown whether mobilization is safe or affects filter lifespan. Our objective in this study was to test the safety and feasibility of mobilization in this population. Methods A total of 33 patients undergoing continuous renal replacement therapy via femoral, subclavian or internal jugular vascular access catheters at two general medical-surgical intensive care units in Australia were enrolled. Patients underwent one of three levels of mobilization intervention as appropriate: (1) passive bed exercises, (2) sitting on the bed edge or (3) standing and/or marching. Catheter dislodgement, haematoma and bleeding during and following interventions were evaluated. Filter pressure parameters and lifespan (hours), nursing workload and concern were also measured. Results No episodes of filter occlusion or failure occurred during any of the interventions. No adverse events were detected. The intervention filters lasted longer than the nonintervention filters (regression coefficient = 13.8 (robust 95% confidence interval (CI) = 5.0 to 22.6), P = 0.003). In sensitivity analyses, we found that filter life was longer in patients who had more position changes (regression coefficient = 2.0 (robust 95% CI = 0.6 to 3.5), P = 0.007). The nursing workloads between the intervention shift and the following shift were similar. Conclusions Mobilization during renal replacement therapy via a vascular catheter in patients who are critically ill is safe and may increase filter life. These findings have significant implications for the current mobility restrictions imposed on patients with femoral vascular catheters for renal replacement therapy. Trial registration Australian and New Zealand Clinical Trials Registry ACTRN12611000733976 (registered 13 July 2011) Electronic supplementary material The online version of this article (doi:10.1186/cc14001) contains supplementary material, which is available to authorized users.

A finite element algorithm based on characteristic based split (CBS) scheme, in combination with arbitrary Lagrangian-Eulerian (ALE) framework, is presented to deal with numerical oscillation and mesh moving, and the complicated flow patterns are given, as studying the flow around oscillating circular cylinders, which are the typical fluid-structure interaction and encountered frequently in the engineering. Following this method, the two-dimensional incompressible Navier-Stokes equations (NSEs) are derived under the ALE reference frame, and consequently the CBS scheme in ALE configuration is given to approach the NSEs in some details. After such transformation, the convective terms can be removed from the original NSEs and the resulting equations become simple diffusion equations, which can be efficiently approached by the standard finite element method. Then, the finite element method is applied to the governing equations obtained, with the aid of an improved moving mesh technique implemented by the modified spring analogy to deal with the coupling between fluid and structure surfaces. Finally, some numerical examples related to flows around stationary and oscillating circular cylinders are simulated with the presented method, in comparison with existing numerical and experimental results. Additionally, the flow patterns of the oscillating cylinder wake are analyzed tentatively to study the evolution of unsteady vortices, which can induce the oscillation of the structures. The results show that the presented algorithm is feasible and efficient for flow around moving bodies, which includes two main typical problems, namely, the numerical oscillation and mesh moving.

To establish the level of research activity in physiotherapy departments of Australian tertiary hospitals.Prospective cross-sectional survey.Physiotherapy managers from 37 principal referral hospitals and specialist women's and children's hospitals as identified from the Australian Institute of Health and Welfare (2011).A purpose-designed predominantly open-response questionnaire investigating site demographics, research activity and research support was developed, piloted and administered.Thirty-seven surveys were completed (54% response rate). Median [IQR] respondent equivalent full-time staffing was 23.8 (19-39). Respondents represented a median [IQR] 6.5 (3-20) publication output in the past 2 years. Twelve respondents (32%) reported that staff had completed a doctorate in the past 5 years and 49% of respondents reported no staff had completed higher degrees. A total of 71 grants had been received and 73% of respondents indicated they had no allocated staffing for research activity. The most common indicators of research culture were organization-led research dissemination events and research training (i.e. manager attending research events and celebrating research achievements).This is the first study to report on research activity in hospital-based Australian physiotherapy departments. Few sites allocate staff to conduct or support research. Despite this, physiotherapy departments regularly publish and present research results. Future studies could investigate how hospital-based physiotherapy departments can optimize research culture and output.

The Bulong gold deposit, located in Akqi County, Southwest Tianshan, China, is hosted in Upper Devonian fine-grained clastic rocks. Gold mineralization is controlled by a series of gently- dipping fracture zones. The δ34S values of pyrite range from 14.6 to 19.2‰ and those of barite from 35.0 to 39.6‰, indicating that the sulfur was probably derived from the surrounding sedimentary rocks. The 3He/4He ratios of fluid inclusions in pyrite are 0.24–0.82 R/Ra, the 40Ar/36Ar ratios vary from 338 to 471, and the 40Ar/4He ratios range from 0.015 to 0.412, indicating that the ore fluids of the Bulong gold deposit were mainly derived from the crust. The δ13CPDB values of fluid inclusions in vein quartz define a narrow range of −4.6 to −1.4‰. The δ18Ofluid values of 6.7 to 14.7‰, and δD values of fluid inclusions of between −70 and −55‰. The combined isotopic data imply that the ore-forming fluids of the Bulong gold deposit were mainly derived from basinal fluids, with some minor contributions from magmatic fluids and meteoric water.