Search

We propose and experimentally validate a joint estimation method for chromatic dispersion and time-frequency offset based on the fractional Fourier transform, which reduces computational complexity by more than 50% while keeping estimation accuracy., Comment: 5 pages, 5 figures, 1 table, ACPIPOC2024 accept

We utilize the Feature Decoupling Distributed (FDD) method to enhance the capability of deep learning to fit the Nonlinear Schrodinger Equation (NLSE), significantly reducing the NLSE loss compared to non decoupling model.

Coherent optics has demonstrated significant potential as a viable solution for achieving 100 Gb/s and higher speeds in single-wavelength passive optical networks (PON). However, upstream burst-mode coherent detection is a major challenge when adopting coherent optics in access networks. To accelerate digital signal processing (DSP) convergence with a minimal preamble length, we propose a novel burst-mode preamble design based on a constant amplitude zero auto-correlation sequence. This design facilitates comprehensive estimation of linear channel effects in the frequency domain, including polarization state rotation, differential group delay, chromatic dispersion, and polarization-dependent loss, providing overall system response information for channel equalization pre-convergence. Additionally, this preamble utilizes the same training unit to jointly achieve three key DSP functions: frame synchronization, frequency offset estimation, and channel estimation. This integration contributes to a significant reduction in the preamble length. The feasibility of the proposed preamble with a length of 272 symbols and corresponding DSP was experimentally verified in a 15 Gbaud coherent system using dual-polarization 16 quadrature amplitude modulation. The experimental results based on this scheme showed a superior performance of the convergence acceleration., Comment: 10 pages, 12 figures

We design and demonstrate the first field trial of LLM-powered AI Agent for ADON. Three operation modes of the Agent are proposed for network lifecycle management. The Agent efficiently processes wavelength add/drop and soft/hard failures, and achieves comparable performance to human-designed algorithms for power optimization., Comment: Version submitted to ECOC PDP 2024 on September 6th

We propose a heuristic-based optimization scheme for reliable optical amplifier reconfiguration process in ADON. In the experiment on a commercial testbed, the scheme prevents a 1.0-dB Q-factor degradation and outperforms 98.5% random solutions.

We propose a n input parameter refinement scheme for the physics-based Raman amplifier model. Experiments over C+L band are conducted. Results show the scheme can lower the physical model's maximum estimation error by 2.13 dB., Comment: Accpted by Optical Fiber Communication Conference(OFC) 2024, session abbreviation: M4K

To enable intelligent and self-driving optical networks, high-accuracy physical layer models are required. The dynamic wavelength-dependent gain effects of non-constant-pump erbium-doped fiber amplifiers (EDFAs) remain a crucial problem in terms of modeling, as it determines optical-to-signal noise ratio as well as the magnitude of fiber nonlinearities. Black-box data-driven models have been widely studied, but it requires a large size of data for training and suffers from poor generalizability. In this paper, we derive the gain spectra of EDFAs as a simple univariable linear function, and then based on it we propose a grey-box EDFA gain modeling scheme. Experimental results show that for both automatic gain control (AGC) and automatic power control (APC) EDFAs, our model built with 8 data samples can achieve better performance than the neural network (NN) based model built with 900 data samples, which means the required data size for modeling can be reduced by at least two orders of magnitude. Moreover, in the experiment the proposed model demonstrates superior generalizability to unseen scenarios since it is based on the underlying physics of EDFAs. The results indicate that building a customized digital twin of each EDFA in optical networks become feasible, which is essential especially for next generation multi-band network operations.

We propose a multicarrier modulation-based digital radio-over-fibre system achieving unequal bit protection by bit and power allocation for subcarriers. A theoretical SNR gain of 16.1 dB is obtained in the AWGN channel and the simulation results show a 13.5 dB gain in the bandwidth-limited case.

As an imperative method of investigating the internal mechanism of femtosecond lasers, traditional femtosecond laser modeling relies on the split-step Fourier method (SSFM) to iteratively resolve the nonlinear Schrodinger equation suffering from the large computation complexity. To realize inverse design and optimization of femtosecond lasers, numerous simulations of mode-locked fiber lasers with different cavity settings are required further highlighting the time-consuming problem induced by the large computation complexity. Here, a recurrent neural network is proposed to realize fast and accurate femtosecond mode-locked fiber laser modeling for the first time. The generalization over different cavity settings is achieved via our proposed prior information feeding method. With the acceleration of GPU, the mean time of the artificial intelligence (AI) model inferring 500 roundtrips is less than 0.1 s. Even on an identical CPU-based hardware platform, the AI model is still 6 times faster than the SSFM method. The proposed AI-enabled method is promising to become a standard approach to femtosecond laser modeling.

Based on the physical features of Raman amplification, we propose a three-step modelling scheme based on neural networks (NN) and linear regression. Higher accuracy, less data requirements and lower computational complexity are demonstrated through simulations compared with the pure NN-based method.

We propose a physics-informed EDFA gain model based on the active learning method. Experimental results show that the proposed modelling method can reach a higher optimal accuracy and reduce ~90% training data to achieve the same performance compared with the conventional method.

The modeling and prediction of the ultrafast nonlinear dynamics in the optical fiber are essential for the studies of laser design, experimental optimization, and other fundamental applications. The traditional propagation modeling method based on the nonlinear Schr\"odinger equation (NLSE) has long been regarded as extremely time-consuming, especially for designing and optimizing experiments. The recurrent neural network (RNN) has been implemented as an accurate intensity prediction tool with reduced complexity and good generalization capability. However, the complexity of long grid input points and the flexibility of neural network structure should be further optimized for broader applications. Here, we propose a convolutional feature separation modeling method to predict full-field ultrafast nonlinear dynamics with low complexity and high flexibility, where the linear effects are firstly modeled by NLSE-derived methods, then a convolutional deep learning method is implemented for nonlinearity modeling. With this method, the temporal relevance of nonlinear effects is substantially shortened, and the parameters and scale of neural networks can be greatly reduced. The running time achieves a 94% reduction versus NLSE and an 87% reduction versus RNN without accuracy deterioration. In addition, the input pulse conditions, including grid point numbers, durations, peak powers, and propagation distance, can be flexibly changed during the predicting process. The results represent a remarkable improvement in the ultrafast nonlinear dynamics prediction and this work also provides novel perspectives of the feature separation modeling method for quickly and flexibly studying the nonlinear characteristics in other fields., Comment: 15 pages,9 figures

The modeling of optical wave propagation in optical fiber is a task of fast and accurate solving the nonlinear Schr\"odinger equation (NLSE), and can enable the optical system design, digital signal processing verification and fast waveform calculation. Traditional waveform modeling of full-time and full-frequency information is the split-step Fourier method (SSFM), which has long been regarded as challenging in long-haul wavelength division multiplexing (WDM) optical fiber communication systems because it is extremely time-consuming. Here we propose a linear-nonlinear feature decoupling distributed (FDD) waveform modeling scheme to model long-haul WDM fiber channel, where the channel linear effects are modelled by the NLSE-derived model-driven methods and the nonlinear effects are modelled by the data-driven deep learning methods. Meanwhile, the proposed scheme only focuses on one-span fiber distance fitting, and then recursively transmits the model to achieve the required transmission distance. The proposed modeling scheme is demonstrated to have high accuracy, high computing speeds, and robust generalization abilities for different optical launch powers, modulation formats, channel numbers and transmission distances. The total running time of FDD waveform modeling scheme for 41-channel 1040-km fiber transmission is only 3 minutes versus more than 2 hours using SSFM for each input condition, which achieves a 98% reduction in computing time. Considering the multi-round optimization by adjusting system parameters, the complexity reduction is significant. The results represent a remarkable improvement in nonlinear fiber modeling and open up novel perspectives for solution of NLSE-like partial differential equations and optical fiber physics problems., Comment: 8 pages, 5 figures, 1 table, 30 references

In this paper, we propose a scheme that utilizes the optimization ability of artificial intelligence (AI) for optimal transceiver-joint equalization in compensating for the optical filtering impairments caused by wavelength selective switches (WSS). In contrast to adding or replacing a certain module of existing digital signal processing (DSP), we exploit the similarity between a communication system and a neural network (NN). By mapping a communication system to an NN, in which the equalization modules correspond to the convolutional layers and other modules can been regarded as static layers, the optimal transceiver-joint equalization coefficients can be obtained. In particular, the DSP structure of the communication system is not changed. Extensive numerical simulations are performed to validate the performance of the proposed method. For a 65 GBaud 16QAM signal, it can achieve a 0.76 dB gain when the number of WSSs is 16 with a -6 dB bandwidth of 73 GHz.

We propose a degenerated hierarchical look-up table (DH-LUT) scheme to compensate component nonlinearities. For probabilistically shaped 64-QAM signals, it achieves up to 2-dB SNR improvement, while the size of table is only 8.59% compared to the conventional LUT method.

For further improving the capacity and reliability of optical networks, a closed-loop autonomous architecture is preferred. Considering a large number of optical components in an optical network and many digital signal processing modules in each optical transceiver, massive real-time data can be collected. However, for a traditional monitoring structure, collecting, storing and processing a large size of data are challenging tasks. Moreover, strong correlations and similarities between data from different sources and regions are not properly considered, which may limit function extension and accuracy improvement. To address abovementioned issues, a data-fusion-assisted telemetry layer between the physical layer and control layer is proposed in this paper. The data fusion methodologies are elaborated on three different levels: Source Level, Space Level and Model Level. For each level, various data fusion algorithms are introduced and relevant works are reviewed. In addition, proof-of-concept use cases for each level are provided through simulations, where the benefits of the data-fusion-assisted telemetry layer are shown.

In this work, a new data-driven fiber channel modeling method, generative adversarial network (GAN) is investigated to learn the distribution of fiber channel transfer function. Our investigation focuses on joint channel effects of attenuation, chromic dispersion, self-phase modulation (SPM), and amplified spontaneous emission (ASE) noise. To achieve the success of GAN for channel modeling, we modify the loss function, design the condition vector of input and address the mode collapse for the long-haul transmission. The effective architecture, parameters, and training skills of GAN are also displayed in the paper. The results show that the proposed method can learn the accurate transfer function of the fiber channel. The transmission distance of modeling can be up to 1000 km and can be extended to arbitrary distance theoretically. Moreover, GAN shows robust generalization abilities under different optical launch powers, modulation formats, and input signal distributions. Comparing the complexity of GAN with the split-step Fourier method (SSFM), the total multiplication number is only 2% of SSFM and the running time is less than 0.1 seconds for 1000-km transmission, versus 400 seconds using the SSFM under the same hardware and software conditions, which highlights the remarkable reduction in complexity of the fiber channel modeling.

Mode-locked lasers exhibit complex nonlinear dynamics. Precise observation of these dynamics will aid in understanding of the underlying physics and provide new insights for laser design and applications. The starting dynamics, from initial noise fluctuations to the mode-locking regime, have previously been observed directly by time-stretched transform-based real-time spectroscopy. However, the regime transition dynamics, which are essential processes in mode-locked lasers, have not yet been resolved because regime transition process tracking is very challenging. Here we demonstrate the first insight into the regime transition dynamics enabled by our design of a real-time programmable mode-locked fibre laser, in which different operating regimes can be achieved and switched automatically. The regime transition dynamics among initial noise fluctuations, Q-switching, fundamental mode-locking and harmonic mode-locking regimes have been observed and thoroughly analysed by both temporal and spectral means. These findings will enrich our understanding of the complex dynamics inside mode-locked lasers., Comment: 9 pages, 4 figures

Nonlinear polarized evolution-based passively mode-locked fiber lasers with ultrafast and high peak power pulses are a powerful tool for engineering applications and research. However, their sensitivity to polarization limits their widespread application. To address this, automatic mode-locking immune to environmental disturbances is attracting more concerns. An experimental demonstration of the first real-time programmable mode-locked fiber laser is presented, which is enabled by our proposed human-like algorithm. It combines human logic with a machine's speed, computing capability, and precision. The laser automatically locks onto multiple operation regimes such as fundamental mode-locking, harmonic mode-locking, Q-switching, and even Q-switched mode-locking without physically altering its structure. The average initial mode-locking times (with randomly-assigned original polarization states and recover time from detachment under 10 successive experiments) are only 3.1 s and 58.9 ms. We believe this intelligent laser's superior performance can find practical applications in engineering and scientific research., Comment: 14 pages, 7 figures

A watt-level ultrahigh optical signal-to-noise ratio (OSNR) single-longitudinal-mode (SLM) tunable Brillouin fiber laser (BFL) has been demonstrated.By optimizing the length of the single mode fiber (SMF) cavity at 11m and its output ratio at sixty percent, 1.04 W output power, as well as stable SLM operation is obtained at 2.24 W pump power. The single pass cavity BFL has the advantage that Brillouin pump frequency doesn't need to match the cavity mode, thus the stability is greatly improved. As only SMF is used in the cavity, the operate wavelength can be tunable without the restriction from self lasing cavity mode. Furthermore, it proves that core-pumped single frequency fiber laser is able to generate watt-level power. The laser has excellent performance in terms of noise, linewidth, and stability., Comment: 3 pages, 5 figures. To be published on Optics Letters