Search

In this letter, we present a design of a linear array of tilted dipoles to achieve radiation patterns with asymmetric angular filtering characteristics. To realize the asymmetric radiation, the dipole elements are spaced by a distance larger than half a wavelength, thus allowing for grating lobes to occur in the visible region. Moreover, the dipoles are loaded with artificial dielectrics to increase the front-to-back ratio and consequently to enable higher gain in certain desired angular regions. Based on the design, a linear array with ten elements is manufactured and tested. The measured results show the ability of such an array to achieve stable gain from broadside up to 90° scanning while implementing a stopband angular filter for negative scanning angles., Tera-Hertz Sensing

In recent years, radar systems and satellite communications require phased array antennas that are capable of incorporating frequency and angular selectivity while maintaining a low profile. Active phased array antennas must comply with stringent requirements in terms of sensitivity to interference caused by other nearby radiating systems, especially in complex platforms, where a multitude of sensors and radiating systems need to co-exist. In such environments, antennas working at different frequencies can interfere with each other and the implementation of frequency filtering functions with a good out-of-band rejection are needed. Moreover, the interference between different systems can be mitigated by reducing the radiation in the direct path between them. For this purpose, angular filtering functions for pattern shaping can be beneficial. However, standard planar printed circuit board technology puts constraints on the possible antenna elements that can be realized to achieve frequency and angular selectivity. Thus, using new methods such as additive manufacturing technology and 3D printing can provide more degrees of freedom to fabricate complex geometries with a desired operation. For these reasons, this work focuses on studying new solutions for frequency selectivity with rejection of higher order harmonics, developing a spectral method of moment to study antennas to achieve angular shaping and finding the guidelines needed to design such antennas, and testing additive manufacturing technology to find its suitability at high frequencies for phased array antennas. A bandpass miniaturize-element frequency selective surface with harmonic rejection properties has been designed and manufactured. The design is based on an equivalent circuit model, taking a 3-pole Chebyshev bandpass filter as a starting point, where the inter-layer interaction is only described with a single transmission line representing the fundamental Floquet wave. The prototype consists of five m, Tera-Hertz Sensing

In this letter, we present a design of a linear array of tilted dipoles to achieve radiation patterns with asymmetric angular filtering characteristics. To realize the asymmetric radiation, the dipole elements are spaced by a distance larger than half a wavelength, thus allowing for grating lobes to occur in the visible region. Moreover, the dipoles are loaded with artificial dielectrics to increase the front-to-back ratio and consequently to enable higher gain in certain desired angular regions. Based on the design, a linear array with ten elements is manufactured and tested. The measured results show the ability of such an array to achieve stable gain from broadside up to 90° scanning while implementing a stopband angular filter for negative scanning angles., Tera-Hertz Sensing

In recent years, radar systems and satellite communications require phased array antennas that are capable of incorporating frequency and angular selectivity while maintaining a low profile. Active phased array antennas must comply with stringent requirements in terms of sensitivity to interference caused by other nearby radiating systems, especially in complex platforms, where a multitude of sensors and radiating systems need to co-exist. In such environments, antennas working at different frequencies can interfere with each other and the implementation of frequency filtering functions with a good out-of-band rejection are needed. Moreover, the interference between different systems can be mitigated by reducing the radiation in the direct path between them. For this purpose, angular filtering functions for pattern shaping can be beneficial. However, standard planar printed circuit board technology puts constraints on the possible antenna elements that can be realized to achieve frequency and angular selectivity. Thus, using new methods such as additive manufacturing technology and 3D printing can provide more degrees of freedom to fabricate complex geometries with a desired operation. For these reasons, this work focuses on studying new solutions for frequency selectivity with rejection of higher order harmonics, developing a spectral method of moment to study antennas to achieve angular shaping and finding the guidelines needed to design such antennas, and testing additive manufacturing technology to find its suitability at high frequencies for phased array antennas. A bandpass miniaturize-element frequency selective surface with harmonic rejection properties has been designed and manufactured. The design is based on an equivalent circuit model, taking a 3-pole Chebyshev bandpass filter as a starting point, where the inter-layer interaction is only described with a single transmission line representing the fundamental Floquet wave. The prototype consists of five m, Tera-Hertz Sensing

In this work, antenna arrays with tilted dipoles are investigated in terms of radiation and impedance properties. A spectral method of moments (MoM) was developed for the analysis of doubly-periodic arrays (i.e. periodic in both x and ydirections) with arbitrarily tilted dipole elements, in free space or in the presence of a backing reflector. By the aid of this analysis method, the radiation characteristics of arrays of stacked dipoles over a ground plane are studied, highlighting the variation of the patterns as a function of the inter-element distance and the angle of inclination of the elements., Tera-Hertz Sensing

Antenna arrays located on airplanes or other mobile platforms for satellite communication applications are typically required to support very large scan angles (close to end-_re). How- ever, planar antenna arrays are typically characterized by scan loss. To increase the scan range conformal arrays and multi-panel configuration can be found in literature, but the height of the structures is still too large to be installed on airplanes without significant impact on the aircraft drag. To obtain wide-scan capability while still maintaining a low antenna profile, hybrid scanning mechanism are currently implemented (F. Tiezzi et al., Eu- CAP, 2010). The idea is to scan the beam electronically from broadside to a positive, as high as possible, angle and then to achieve the full coverage by mechanical rotation of the array along the azimuth. In this work we present a study to determine the parameters affecting the power radiated in specific directions by antenna arrays with tilted elements. We developed an efficient Method of Moments (MoM) for the analysis of linear arrays with arbitrarily tilted dipole elements, in free space or in the presence of a backing reflector. By using this analysis method, we study the radiation characteristics of arrays of stacked dipoles over a ground plane, highlighting the variation of the patterns as a function of the inter-element distance and the angle of inclination of the element. For half wavelength inter-element distance the array pattern is rather symmetric even for tilted elements, as expected from the Floquet theory (A.K. Bhattacharyya et al., IEEE TAP, 51, 1572-1581, 2003). However, when the elements are tilted by positive angles and for inter-element distance larger than half wavelength, a null and a reduction in directivity in the radiation pattern is achieved for negative scanning angles. Grating lobes in the visible region are weighted by element pattern. The minimum of the radiation pattern is not necessarily aligned with the d, Tera-Hertz Sensing

We present the design of an array of tilted dipoles loaded with artificial dielectrics, to achieve asymmetric radiation patterns. First, a simplified array element consisting of skewed stacked dipoles in the presence of a backing reflector is studied, by means of a dedicated spectral periodic method of moments (MoM). The analysis of the stacked dipoles provides guidelines to design arrays with certain radiation characteristics, by varying the tilt angle and the inter-element spacing. Based on the findings of numerical analysis, we then propose a tilted dipole element design with artificial dielectric loading to implement the pattern asymmetry. The design includes the feeding structure and the balun transition to a 50-Ohm coaxial line., Tera-Hertz Sensing

We propose a systematic approach to describe planar slot antennas, embedded in generic stratified media. An equivalent transmission line model for the slot is proposed, based on a spectral domain analysis. First, we introduce a method of moments solution to model semi-infinite slots, fed by a deltagap excitation. The solution entails only two basis functions, one located at the feed and the other at the termination. The latter basis function is chosen to properly account for the field diffractive behavior at the antenna end point. An approximate circuit model is then introduced, which describes the main mode propagating along the slot as an equivalent transmission line. Lumped impedances are extracted to accurately describe the source and the end point. This procedure can be used to derive the input impedance of planar antennas with arbitrary length in generic layered media or the interaction between multiple feeds within the same slot., Tera-Hertz Sensing

Antenna arrays located on airplanes or other mobile platforms for satellite communication applications are typically required to support very large scan angles (close to end-_re). How- ever, planar antenna arrays are typically characterized by scan loss. To increase the scan range conformal arrays and multi-panel configuration can be found in literature, but the height of the structures is still too large to be installed on airplanes without significant impact on the aircraft drag. To obtain wide-scan capability while still maintaining a low antenna profile, hybrid scanning mechanism are currently implemented (F. Tiezzi et al., Eu- CAP, 2010). The idea is to scan the beam electronically from broadside to a positive, as high as possible, angle and then to achieve the full coverage by mechanical rotation of the array along the azimuth. In this work we present a study to determine the parameters affecting the power radiated in specific directions by antenna arrays with tilted elements. We developed an efficient Method of Moments (MoM) for the analysis of linear arrays with arbitrarily tilted dipole elements, in free space or in the presence of a backing reflector. By using this analysis method, we study the radiation characteristics of arrays of stacked dipoles over a ground plane, highlighting the variation of the patterns as a function of the inter-element distance and the angle of inclination of the element. For half wavelength inter-element distance the array pattern is rather symmetric even for tilted elements, as expected from the Floquet theory (A.K. Bhattacharyya et al., IEEE TAP, 51, 1572-1581, 2003). However, when the elements are tilted by positive angles and for inter-element distance larger than half wavelength, a null and a reduction in directivity in the radiation pattern is achieved for negative scanning angles. Grating lobes in the visible region are weighted by element pattern. The minimum of the radiation pattern is not necessarily aligned with the d, Tera-Hertz Sensing

We present the design of an array of tilted dipoles loaded with artificial dielectrics, to achieve asymmetric radiation patterns. First, a simplified array element consisting of skewed stacked dipoles in the presence of a backing reflector is studied, by means of a dedicated spectral periodic method of moments (MoM). The analysis of the stacked dipoles provides guidelines to design arrays with certain radiation characteristics, by varying the tilt angle and the inter-element spacing. Based on the findings of numerical analysis, we then propose a tilted dipole element design with artificial dielectric loading to implement the pattern asymmetry. The design includes the feeding structure and the balun transition to a 50-Ohm coaxial line., Tera-Hertz Sensing

We propose a systematic approach to describe planar slot antennas, embedded in generic stratified media. An equivalent transmission line model for the slot is proposed, based on a spectral domain analysis. First, we introduce a method of moments solution to model semi-infinite slots, fed by a deltagap excitation. The solution entails only two basis functions, one located at the feed and the other at the termination. The latter basis function is chosen to properly account for the field diffractive behavior at the antenna end point. An approximate circuit model is then introduced, which describes the main mode propagating along the slot as an equivalent transmission line. Lumped impedances are extracted to accurately describe the source and the end point. This procedure can be used to derive the input impedance of planar antennas with arbitrary length in generic layered media or the interaction between multiple feeds within the same slot., Tera-Hertz Sensing

In this work, antenna arrays with tilted dipoles are investigated in terms of radiation and impedance properties. A spectral method of moments (MoM) was developed for the analysis of doubly-periodic arrays (i.e. periodic in both x and ydirections) with arbitrarily tilted dipole elements, in free space or in the presence of a backing reflector. By the aid of this analysis method, the radiation characteristics of arrays of stacked dipoles over a ground plane are studied, highlighting the variation of the patterns as a function of the inter-element distance and the angle of inclination of the elements., Tera-Hertz Sensing

A five-layer frequency selective surface (FSS) composed of subwavelength elements with large harmonic rejection bandwidth is presented. The FSS design is based on an equivalent circuit model, where the interlayer interaction is only described with a single transmission line representing the fundamental Floquet wave. A prototype of the designed FSS is fabricated, and the measured response exhibits good stability over a wide conical incidence range up to 45°. The FSS is combined with a wide-scanning connected array of dipoles to implement a phased array with integrated filtering properties. A dispersion analysis is performed to define the distance between the array and the FSS that avoids the propagation of surface waves between the combined structures, allowing to maximize the radiation efficiency. The performance of the array combined with the FSS is experimentally characterized, showing high-order harmonic rejection better than 17 dB over a large bandwidth., Accepted Author Manuscript, Tera-Hertz Sensing

A five-layer frequency selective surface (FSS) composed of subwavelength elements with large harmonic rejection bandwidth is presented. The FSS design is based on an equivalent circuit model, where the interlayer interaction is only described with a single transmission line representing the fundamental Floquet wave. A prototype of the designed FSS is fabricated, and the measured response exhibits good stability over a wide conical incidence range up to 45°. The FSS is combined with a wide-scanning connected array of dipoles to implement a phased array with integrated filtering properties. A dispersion analysis is performed to define the distance between the array and the FSS that avoids the propagation of surface waves between the combined structures, allowing to maximize the radiation efficiency. The performance of the array combined with the FSS is experimentally characterized, showing high-order harmonic rejection better than 17 dB over a large bandwidth., Accepted Author Manuscript, Tera-Hertz Sensing