Search

Colloidal semiconductor nanocrystals (NCs) are used as bright chromatic fluorophores for energy-efficient displays. We focus here on the size-dependent Stokes shift for CsPbBr

Flexible semiconductor materials, where structural fluctuations and transformation are tolerable and have low impact on electronic properties, focus interest for future applications. Two-dimensional thin layer lead halide perovskites are hailed for their unconventional optoelectronic features. We report structural deformations via thin layer buckling in colloidal CsPbBr3 nanobelts adsorbed on carbon substrates. The microstructure of buckled nanobelts is determined using transmission electron microscopy and atomic force microscopy. We measured significant decrease in emission from the buckled nanobelt using cathodoluminescence, marking the influence of such mechanical deformations on electronic properties. By employing plate buckling theory, we approximate adhesion forces between the buckled nanobelt and the substrate to be Fadhesion ∼ 0.12 μN, marking a limit to sustain such deformation. This work highlights detrimental effects of mechanical buckling on electronic properties in halide perovskite nanostructures and points toward the capillary action that should be minimized in fabrication of future devices and heterostructures based on nanoperovskites.

Lead halide perovskite nanoplates support strongly quantum confined excitons, high photoluminescence quantum yield, fast and narrow photoluminescence spectra. Future use of these nanomaterials is s...

The rapid development of solar cells based on lead halide perovskites (LHPs) has prompted very active research activities in other closely-related fields. Colloidal nanostructures of such materials display superior optoelectronic properties. Especially, one-dimensional (1D) LHPs nanowires show anisotropic optical properties when they are highly oriented. However, the ionic nature makes them very sensitive to external environment, limiting their large scale practical applications. Here, we introduce an amphiphilic block copolymer, polystyrene-block-poly(4-vinylpyridine) (PS-P4VP), to chemically modify the surface of colloidal CsPbBr3 nanowires. The resulting core-shell nanowires show enhanced photoluminescent emission and good colloidal stability against water. Taking advantage of the stability enhancement, we further applied a modified Langmuir-Blodgett technique to assemble monolayers of highly aligned nanowires, and studied their anisotropic optical properties.

We present the first observation of superfluorescence triggered by free electrons, shown for superlattices of lead-halide perovskite quantum dots. By controlling the excitation area, the emission is switched between spontaneous to superfluorescence emission.

We demonstrate nanophotonic enhancement of the intrinsic spontaneous emission of X-ray-driven scintillation. By designing a 16-layers nanophotonic scintillator structure, we present the first observation of Purcell-enhanced scintillation, expressed by enhanced angular emission of visible photons.

Correction for ‘Atomically flat semiconductor nanoplatelets for light-emitting applications’ by Bing Bai et al., Chem. Soc. Rev., 2023, 52, 318–360, https://doi.org/10.1039/D2CS00130F.

Lead toxicity has sparked interest into alternative halide nanomaterials with properties similar to CsPbX3 perovskites. A promising alternative suggested from bulk studies is the family of double p...

Biominerals formed by organisms in the course of biomineralization often demonstrate complex morphologies despite their single-crystalline nature. This is achieved owing to the crystallization via a predeposited amorphous calcium carbonate (ACC) phase, a precursor that is particularly widespread in biominerals. Inspired by this natural strategy, we used robocasting, an additive manufacturing three-dimensional (3D) printing technique, for printing 3D objects from novel long-term, Mg-stabilized ACC pastes with high solids loading. We demonstrated, for the first time, that the ACC remains stable for at least a couple of months, even after printing. Crystallization, if desired, occurs only after the 3D object is already formed and at temperatures significantly lower than those of common postprinting sintering. We also examined the effects different organic binders have on the crystallization, the morphology, and the final amount of incorporated Mg. This novel bio-inspired method may pave the way for a new bio-inspired route to low-temperature 3D printing of ceramic materials for a multitude of applications., Graphical abstract Image 1

Amorphous Calcium Carbonate (ACC) is a highly unstable amorphous precursor many organisms utilize for the formation of crystals with intricate morphology and improved mechanical properties. Herein, we report for the first-time high-yield long-term stabilization of ACC, achieved via its co-precipitation in the presence of high amounts of Mg and an acetone-based storage protocol. A novel use of the formed high-Mg ACC paste as an ink for 3D printing techniques allows the formation of bio-inspired intricately shaped calcium carbonate geometries. The obtained ink can dry, though retains its amorphous nature, at a variety of temperatures ranging from 25 to 150˚C enabling various applications such as cultural heritage reconstruction and artificial reefs formation. We also show the on-demand low-temperature crystallization of the 3D printed ACC models, similar to what is achieved by organisms in nature. Using this bio-inspired crystallization route via transient amorphous precursor also enables the presence of high Mg levels within the calcite crystalline lattice, far beyond the thermodynamically stable solubility level. High levels of Mg incorporation, in turns, encompasses a great promise for the enhancement in the mechanical properties of the crystallized calcite 3D objects akin naturally found crystalline CaCO3.

Lead-free double perovskites are studied as an optional replacement to lead halide perovskites in optoelectronic applications. Recently, double-perovskite materials in which two divalent lead cations are replaced with an Ag+ and a trivalent cation have been demonstrated. The presence of a reactive silver cation and observations of metallic silver nanodecorations raised concerns regarding the stability and applicability of these materials. To better understand the nucleation and crystal growth of lead-free double perovskites, we explore the origin and role that metallic silver nanoparticles (NPs) play in the Ag-based Pb-free double-perovskite nanocrystal (NC) systems such as Cs2AgInCl6, Cs2AgSbCl6, Cs2AgBiCl6, and Cs2AgBiBr6. With major focus on Cs2AgInCl6 NCs, we show evidence supporting growth of the NCs through heterogeneous nucleation on preexisting metallic silver seeds. The silver seeds nucleate prior to injection of halide through reduction of the Ag+ ion by the aminic ligand. The presence of preexisting silver NPs is supported by a localized surface plasmon resonance (LSPR). The injection of halide precursor into the reaction mixture step initiates a fast nucleation and growth of the perovskite NC on the silver seed. The change in the dielectric medium at the interface of the silver NP results in a quantifiable red shift of the LSPR peak. In addition, we demonstrate charge transfer from the perovskite to the silver NP through photoinduced electrochemical Ostwald ripening of the silver NPs via UV irradiation. The ripened perovskite-metal hybrid nanocrystal exhibits modified optical properties in the form of quenched emission and enhanced plasmonic absorption. Future development of Ag-based double-perovskite NC applications depends on the ability to control Ag+ reduction at all synthetic stages. This understanding is critical for delivering stability and functionality for silver-based lead-free perovskite nanocrystals.

We in-situ observe the ultrafast dynamics of trapped carriers in organic methyl ammonium lead halide perovskite thin films by ultrafast photocurrent spectroscopy with a sub-25 picosecond time resolution. Upon ultrafast laser excitation, trapped carriers follow a phonon assisted tunneling mechanism and a hopping transport mechanism along ultra-shallow to shallow trap states ranging from 1.72–11.51 millielectronvolts and is demonstrated by time-dependent and independent activation energies. Using temperature as an energetic ruler, we map trap states with ultra-high energy resolution down to, Defect states in perovskites dictate the charge carriers behaviour, thus the ultimate optical and electrical properties. Here, the authors in-situ investigate trapped carrier dynamics in MAPbI3 thin films with ultra-fast temporal and high energetic resolution by means of ultrafast photocurrent spectroscopy.

In this topical review, we have focused on the recent advances made in the studies of lead-free perovskites in the bulk form and as nanocrystals. Substitution of lead in halide perovskites is essential to overcome the toxicity concerns and improve the relatively low stability of these materials. In lead-free double perovskites the unit cell is doubled and two divalent lead cations are replaced by mono and trivalent cations. The current main challenge with the double perovskite metal halides lies in overcoming their inherently indirect and disallowed optical transitions. In this review, we have discussed the recent discoveries made in the synthesis of these materials and highlighted how nanocrystals can serve as model systems to explore the schemes of cationic exchange, doping and alloying for engineering the electronic structure of double perovskites. In nanocrystals, the quantum confinement effects can modify the electronic structure and the resulting optical transition, thus increasing the absorption cross-section and emission, which are important properties for optoelectronic devices. Lastly, the enlarged surface to volume ratio in the nanocrystals adds a surface energy term that may enhance the stability of the metastable crystallographic phases. We have reviewed how the nanocrystal can provide information on phases that are inherently stable and investigated how the facile exchange reactions can help in achieving material compositions that are impossible to achieve by any other way. Finally, based on our recent synthetic experience, we have emphasized the similarities between lead-based and lead-free perovskite nanocrystals; we hope that our insight along with a summary of recent progress in this fast-growing field will help to expand the interest in lead-free perovskites towards a greener and brighter future.

Lead halide perovskite nanocrystals (NCs) have emerged as attractive nanomaterials owing to their excellent optical and optoelectronic properties. Their intrinsic instability and soft nature enable a post-synthetic controlled chemical transformation. We studied a ligand mediated transformation of presynthesized CsPbBr3 NCs to a new type of lead–halide depleted perovskite derivative nanocrystal, namely Cs4PbBr6. The transformation is initiated by amine addition, and the use of alkyl-thiol ligands greatly improves the size uniformity and chemical stability of the derived NCs. The thermodynamically driven transformation is governed by a two-step dissolution–recrystallization mechanism, which is monitored optically. Our results not only shed light on a decomposition pathway of CsPbBr3 NCs but also present a method to synthesize uniform colloidal Cs4PbBr6 NCs, which may actually be a common product of perovskite NCs degradation.

We report 3D printing of anisotropically polarized optical devices composed of perovskite nanowire-block copolymer composites., One-dimensional (1D) nanomaterials with highly anisotropic optoelectronic properties are key components in energy harvesting, flexible electronics, and biomedical imaging devices. 3D patterning methods that precisely assemble nanowires with locally controlled composition and orientation would enable new optoelectronic device designs. As an exemplar, we have created and 3D-printed nanocomposite inks composed of brightly emitting colloidal cesium lead halide perovskite (CsPbX3, X = Cl, Br, and I) nanowires suspended in a polystyrene-polyisoprene-polystyrene block copolymer matrix. The nanowire alignment is defined by the programmed print path, resulting in optical nanocomposites that exhibit highly polarized absorption and emission properties. Several devices have been produced to highlight the versatility of this method, including optical storage, encryption, sensing, and full-color displays.

Colloidal cesium lead halide perovskite nanocrystals exhibit unique photophysical properties including high quantum yields, tunable emission colors, and narrow photoluminescence spectra that have marked them as promising light emitters for applications in diverse photonic devices. Randomly oriented transition dipole moments have limited the light outcoupling efficiency of all isotropic light sources, including perovskites. In this report we design and synthesize deep blue emitting, quantum confined, perovskite nanoplates and analyze their optical properties by combining angular emission measurements with back focal plane imaging and correlating the results with physical characterization. By reducing the dimensions of the nanocrystals and depositing them face down onto a substrate by spin coating, we orient the average transition dipole moment of films into the plane of the substrate and improve the emission properties for light emitting applications. We then exploit the sensitivity of the perovskite electronic transitions to the dielectric environment at the interface between the crystal and their surroundings to reduce the angle between the average transition dipole moment and the surface to only 14° and maximize potential light emission efficiency. This tunability of the electronic transition that governs light emission in perovskites is unique and, coupled with their excellent photophysical properties, introduces a valuable method to extend the efficiencies and applications of perovskite based photonic devices beyond those based on current materials.

Colloidal cesium lead halide perovskite nanocrystals exhibit unique photophysical properties including high quantum yields, tunable emission colors, and narrow photoluminescence spectra that have marked them as promising light emitters for applications in diverse photonic devices. Randomly oriented transition dipole moments have limited the light outcoupling efficiency of all isotropic light sources, including perovskites. In this report we design and synthesize deep blue emitting, quantum confined, perovskite nanoplates and analyze their optical properties by combining angular emission measurements with back focal plane imaging and correlating the results with physical characterization. By reducing the dimensions of the nanocrystals and depositing them face down onto a substrate by spin coating, we orient the average transition dipole moment of films into the plane of the substrate and improve the emission properties for light emitting applications. We then exploit the sensitivity of the perovskite electronic transitions to the dielectric environment at the interface between the crystal and their surroundings to reduce the angle between the average transition dipole moment and the surface to only 14° and maximize potential light emission efficiency. This tunability of the electronic transition that governs light emission in perovskites is unique and, coupled with their excellent photophysical properties, introduces a valuable method to extend the efficiencies and applications of perovskite based photonic devices beyond those based on current materials.

Treatment of InP colloidal quantum dots (QDs) with hydrofluoric acid (HF) has been an effective method to improve their photoluminescence quantum yield (PLQY) without growing a shell. Previous work has shown that this can occur through the dissolution of the fluorinated phosphorus and subsequent passivation of indium on the reconstructed surface by excess ligands. In this article, we demonstrate that very significant luminescence enhancements occur at lower HF exposure though a different mechanism. At lower exposure to HF, the main role of the fluoride ions is to directly passivate the surface indium dangling bonds in the form of atomic ligands. The PLQY enhancement in this case is accompanied by red shifts of the emission and absorption peaks rather than blue shifts caused by etching as seen at higher exposures. Density functional theory shows that the surface fluorination is thermodynamically preferred and that the observed spectral characteristics might be due to greater exciton delocalization over the outermost surface layer of the InP QDs as well as alteration of the optical oscillator strength by the highly electronegative fluoride layer. Passivation of surface indium with fluorides can be applied to other indium-based QDs. PLQY of InAs QDs could also be increased by an order of magnitude via fluorination. We fabricated fluorinated InAs QD-based electrical devices exhibiting improved switching and higher mobility than those of 1,2-ethanedithiol cross-linked QD devices. The effective surface passivation eliminates persistent photoconductivity usually found in InAs QD-based solid films.

Replacing lead in halide perovskites is of great interest due to concerns about stability and toxicity. Recently, lead free double perovskites in which the unit cell is doubled and two divalent lead cations are substituted by a combination of mono- and trivalent cations have been synthesized as bulk single crystals and as thin films. Here, we study stability and optical properties of all-inorganic cesium silver(I) bismuth(III) chloride and bromide nanocrystals with the double perovskite crystal structure. The cube-shaped nanocrystals are monodisperse in size with typical side lengths of 8 to 15 nm. The absorption spectrum of the nanocrystals presents a sharp peak, which we assign to a direct bismuth s-p transition and not to a quantum confined excitonic transition. Using this spectroscopic handle combined with high-resolution transmission electron microscopy (TEM) based elemental analysis, we conduct stoichiometric studies at the single nanocrystal level as well as decomposition assays in solution and observe that Ag+ diffusion and coalescence is one of the pathways by which this material degrades. Drying the nanocrystals leads to self-assembly into ordered nanocrystal solids, and these exhibit less degradation than nanocrystals in solution. Our results demonstrate that Cs2AgBiX6 (X = Cl, Br) nanocrystals are a useful model system to study structure-function relationships in the search for stable nontoxic halide perovskites.

Anisotropic colloidal quasi-two-dimensional nanoplates (NPLs) hold great promise as functional materials due to their combination of low dimensional optoelectronic properties and versatility through colloidal synthesis. Recently, lead-halide perovskites have emerged as important optoelectronic materials with excellent efficiencies in photovoltaic and light-emitting applications. Here we report the synthesis of quantum confined all inorganic cesium lead halide nanoplates in the perovskite crystal structure that are also highly luminescent (PLQY 84%). The controllable self-assembly of nanoplates either into stacked columnar phases or crystallographic-oriented thin-sheet structures is demonstrated. The broad accessible emission range, high native quantum yields, and ease of self-assembly make perovskite NPLs an ideal platform for fundamental optoelectronic studies and the investigation of future devices.

Lead halide perovskite nanocrystals (NCs) have emerged as attractive nanomaterials owing to their excellent optical and optoelectronic properties. Their intrinsic instability and soft nature enable a post-synthetic controlled chemical transformation. We studied a ligand mediated transformation of presynthesized CsPbBr

Quantum confinement effects are observed in transport measurements of Cu2S nanocrystal based devices. Two nanocrystals sizes are studied, 3 nm being in the quantum-confinement regime, and 14 nm, lacking confinement. The effect of ligand length on the charge transport mechanism is studied via conductance temperature dependence measurements. While in the 14 nm nanocrystal based devices unique non-monotonic temperature dependence is observed, the 3 nm based devices show only thermally activated transport for all ligands. The difference is attributed to a cross-over from inter-particle hopping to intra-particle dominated transport as the ligand length increases. In the 3 nm devices the effect of ligand length on the charge-hopping activation energy is also discussed.

A new approach for doping of Cu2S nanocrystal arrays using thermal treatment at moderate temperatures (T < 400 K) is presented. This thermal doping process yields conductance enhancement by 6 orders of magnitude. Local probe measurements prove this doping is an intraparticle effect and, moreover, tunneling spectroscopy data signify p-type doping. The doping mechanism is attributed to Cu vacancy formation, resulting in free holes. Thermal-doping temperature dependence exhibits an Arrhenius-like behavior, providing the vacancy formation energy of 1.6 eV. The moderate temperature conditions for thermal doping unique to these nanocrystals allow patterned doping of nanocrystal films through local heating by a focused laser beam, toward fabrication of nanocrystal-based electronic devices.

Metal decoration on the edges of highly faceted Cu2S semiconductor nanocrystals yields a family of nano-inorganic caged (NICed) hybrid semiconductor–metal nanoparticles. We present the growth of rhodium and of ruthenium–rhodium mixture to give Rh–Cu2S and RuRh–Cu2S hybrid nanoparticle cages, respectively. Transmission electron microscopy affirms the growth of the metals selectively on the nanocrystal edges within a narrow temperature window. The oxidation level of the metal frame could also be controlled during the reaction stages as characterized by X-ray photoelectron spectroscopy, providing additional variation for the hybrid nanoparticle cages. The synergistic electronic properties of the hybrid nanocages were observed on a single particle level using scanning tunneling spectroscopy. The various cage nanoparticles are also of interest as possible catalysts for metal and metal-oxide catalyzed reactions.

© 2016 American Chemical Society. The radiation-sensitive nature of halide perovskites has hindered structural studies at the atomic scale. We overcome this obstacle by applying low dose-rate in-line holography, which combines aberration-corrected high-resolution transmission electron microscopy with exit-wave reconstruction. This technique successfully yields the genuine atomic structure of ultrathin two-dimensional CsPbBr3 halide perovskites, and a quantitative structure determination was achieved atom column by atom column using the phase information of the reconstructed exit-wave function without causing electron beam-induced sample alterations. An extraordinarily high image quality enables an unambiguous structural analysis of coexisting high-temperature and low-temperature phases of CsPbBr3 in single particles. On a broader level, our approach offers unprecedented opportunities to better understand halide perovskites at the atomic level as well as other radiation-sensitive materials.

Lead halide perovskites hold promise for photonic devices, due to their superior optoelectronic properties. However, their use is limited by poor stability and toxicity. We demonstrate enhanced water and light stability of high-surface-area colloidal perovskite nanocrystals by encapsulation of colloidal CsPbBr3 quantum dots into matched hydrophobic macroscale polymeric matrices. This is achieved by mixing the quantum dots with presynthesized high-molecular-weight polymers. We monitor the photoluminescence quantum yield of the perovskite-polymer nanocomposite films under water-soaking for the first time, finding no change even after >4 months of continuous immersion in water. Furthermore, photostability is greatly enhanced in the macroscale polymer-encapsulated nanocrystal perovskites, which sustain >1010 absorption events per quantum dot prior to photodegradation, a significant threshold for potential device use. Control of the quantum dot shape in these thin-film polymer composite enables color tunability via strong quantum-confinement in nanoplates and significant room temperature polarized emission from perovskite nanowires. Not only does the high-molecular-weight polymer protect the perovskites from the environment but also no escaped lead was detected in water that was in contact with the encapsulated perovskites for months. Our ligand-passivated perovskite-macroscale polymer composites provide a robust platform for diverse photonic applications.

Highly uniform single crystal ultrathin CsPbBr3 nanowires (NWs) with diameter of 2.2 ± 0.2 nm and length up to several microns were successfully synthesized and purified using a catalyst-free colloidal synthesis method followed by a stepwise purification strategy. The NWs have bright photoluminescence (PL) with a photoluminescence quantum yield (PLQY) of about 30% after surface treatment. Large blue-shifted UV-vis absorption and PL spectra have been observed due to strong two-dimensional quantum confinement effects. A small angle X-ray scattering (SAXS) pattern shows the periodic packing of the ultrathin NWs along the radial direction, demonstrates the narrow radial distribution of the wires, and emphasizes the deep intercalation of the surfactants. Despite the extreme aspect ratios of the ultrathin NWs, their composition and the resulting optical properties can be readily tuned by an anion-exchange reaction with good morphology preservation. These bright ultrathin NWs may be used as a model system to study strong quantum confinement effects in a one-dimensional halide perovskite system.

Ion-exchange transformations allow access to nanocrystalline materials with compositions that are inaccessible via direct synthetic routes. However, additional mechanistic insight into the processes that govern these reactions is needed. We present evidence for the presence of two distinct mechanisms of exchange during anion exchange in CsPbX3 nanocrystals (NCs), ranging in size from 6.5 to 11.5 nm, for transformations from CsPbBr3 to CsPbCl3 or CsPbI3. These NCs exhibit bright luminescence throughout the exchange, allowing their optical properties to be observed in real time, in situ. The iodine exchange presents surface-reaction-limited exchanges allowing all anionic sites within the NC to appear chemically identical, whereas the chlorine exchange presents diffusion-limited exchanges proceeding through a more complicated exchange mechanism. Our results represent the first steps toward developing a microkinetic description of the anion exchange, with implications not only for understanding the lead halide perovskites but also for nanoscale ion exchange in general.

© 2016 American Chemical Society. Here, we demonstrate the successful synthesis of brightly emitting colloidal cesium lead halide (CsPbX3, X = Cl, Br, I) nanowires (NWs) with uniform diameters and tunable compositions. By using highly monodisperse CsPbBr3NWs as templates, the NW composition can be independently controlled through anion-exchange reactions. CsPbX3alloy NWs with a wide range of alloy compositions can be achieved with well-preserved morphology and crystal structure. The NWs are highly luminescent with photoluminescence quantum yields (PLQY) ranging from 20% to 80%. The bright photoluminescence can be tuned over nearly the entire visible spectrum. The high PLQYs together with charge transport measurements exemplify the efficient alloying of the anionic sublattice in a one-dimensional CsPbX3system. The wires increased functionality in the form of fast photoresponse rates and the low defect density suggest CsPbX3NWs as prospective materials for optoelectronic applications.

We have previously shown that heart-shaped balloons have a different explosion mechanism than spherical balloons in which the former splits into two rubber parts still attached to the balloon base with a backward whiplash motion. This backward whiplash motion may cause significant blunt ocular trauma if the balloon is inflated by mouth. In this article, the energy of the blunt ocular trauma is estimated by the high speed camera photos analysis of the balloon burst. Furthermore, we describe the followup of eight patients with ocular trauma following inflation of heart-shaped balloons.

Colloidal nanocrystal synthesis provides a powerful approach for creating unique nanostructures of relevance for applications. Here, we report that wurtzite ZnSe nanorod couples connected by twinning structures can be synthesized by means of a self-limited assembly process. Unlike for individual nanorods, the band-edge states calculated for the nanorod couples are predominantly confined to the short edges of the structure and this leads to low photoluminescence polarization anisotropy, as confirmed by single-particle fluorescence. Through a cation-exchange approach, the composition of nanorod couples can be readily expanded to additional materials, such as CdSe and PbSe. We anticipate that this family of nanorod-couple structures with distinct compositions and controlled properties will constitute an ideal system for the investigation of electronic coupling effects between individual nanorod components on the nanoscale, with relevance to applications in optics, photocatalysis and optoelectronic devices.

Hybrid inorganic nanoparticles, comprising a semiconducting Cu(2)S quantum-dot (QD) core encapsulated by a metallic Ru cage-like shell, and each of their individual components, are studied via scanning tunneling spectroscopy. Bare Cu(2)S QDs show nearly identical semiconducting-like I-V characteristics while the empty Ru cages exhibit single electron tunneling effects-the Coulomb blockade and staircase. Surprisingly, in some cases negative differential conductance features, with periodicity that correlates to the Coulomb staircase, were observed. The tunneling spectra measured on the hybrid QDs varies greatly along a single particle, manifesting synergetic electrical properties that originate from this unique semiconducting-metallic interface.

We observe that different growth conditions and resulting morphologies of CsPbBr3 nanocrystals yield opposite stokes shift size-dependent trends. This emphasizes the different photo-physics for quantum-confined nanoplate and nanocube morphologies.

Infrared absorption measurements of amorphous and crystalline nanoparticles of GeTe reveal a localized surface plasmon resonance (LSPR) mode in the crystalline phase that is absent in the amorphous phase. The LSPR mode emerges upon crystallization of amorphous nanoparticles. The contrasting plasmonic properties are elucidated with scanning tunneling spectroscopy measurements indicating a Burstein-Moss shift of the band gap in the crystalline phase and a finite density of electronic states throughout the band gap in the amorphous phase that limits the effective free carrier density.