Search

Molecularly imprinted polymer (MIP)-based electrochemical sensors for the protein α-synuclein (a marker for Parkinson's disease) were developed using a peptide epitope from the protein. MIPs doped with various concentrations and species of transition metal dichalcogenides (TMDs) to enhance conductivity were electropolymerized with and without template molecules. The current during the electropolymerization was compared with that associated with the electrochemical response (at 0.24~0.29 V vs. ref. electrode) to target peptide molecules in the finished sensor. We found that this relationship can aid in the rational design of conductive MIPs for the recognition of biomarkers in biological fluids. The sensing range and limit of detection of TMD-doped imprinted poly(AN-co-MSAN)-coated electrodes were 0.001-100 pg/mL and 0.5 fg/mL (SNR = 3), respectively. To show the potential applicability of the MIP electrochemical sensor, cell culture medium from PD patient-specific midbrain organoids generated from induced pluripotent stem cells was analyzed. α-Synuclein levels were found to be significantly reduced in the organoids from PD patients, compared to those generated from age-matched controls. The relative standard deviation and recovery are less than 5% and 95-115%, respectively. Preparation of TMD-doped α-synuclein (SNCA) peptide-imprinted poly(AN-co-MSAN)-coated electrodes.

Parkinson's disease (PD) is a progressive nervous system disorder that affects movement, whose early signs may be mild and unnoticed. α-Synuclein has been identified as the major component of Lewy bodies and Lewy neurites, which are the characteristic proteinaceous deposits that are the hallmarks of PD. In this work, three alpha-synuclein peptides were synthesized as templates for the molecular imprinting of conductive polymers to enable recognition of alpha-synuclein via ultrasensitive electrochemical measurements. The peptide sequences encompassed specific residues where mutations are known to accelerate PD (though the target sequences, in this study, were wild-type.) The different peptide targets were all successfully imprinted, but with differing imprinting effectiveness, probably owing to differences in target carboxylic acids (which can bind to the aniline (AN) m-aminobenzenesulfonic acid (MSAN) MIP polymers.) Composition of the imprinted polymer, (the mole proportions of AN and MSAN), and the concentrations and sequences of imprinted peptide templates were optimized by measuring the electrochemical responses to target peptides. The imprinted electrode can detect alpha-synuclein at fg/mL levels, and was therefore used to measure alpha-synuclein in the culture medium of human brain organoids generated from normal and idiopathic PD patients., (Copyright © 2020 Elsevier B.V. All rights reserved.)

We introduce a single-grain gate-all-around (GAA) Si nanowire (NW) FET using the location-controlled-grain technique and several innovative low-thermal budget processes, including green nanosecond laser crystallization, far-infrared laser annealing, and hybrid laser-assisted salicidation, that keep the substrate temperature (T sub ) lower than 400 °C for monolithic three-dimensional integrated circuits (3D-ICs). The detailed process verification of a low-defect GAA nanowire and electrical characteristics were investigated in this article. The GAA Si NW FETs, which were intentionally fabricated within the controlled Si grain, exhibit a steeper subthreshold swing (S.S.) of about 65 mV/dec., higher driving currents of 327 µA/µm (n-type) and 297 µA/µm (p-type) @ V th ± 0.8 V, and higher I on /I off (>10 5 @|V d | = 1 V) and have a narrower electrical property distribution. In addition, the proposed Si NW FETs with a GAA structure were found to be less sensitive to V th roll-off and S.S. degradation compared to the omega(Ω)-gate Si FETs. It enables ultrahigh-density sequentially stackable integrated circuits with superior performance and low power consumption for future mobile and neuromorphic applications.

A high-quality HfGeO x interfacial layer (IL) was formed in a HfO₂/Al₂O₃/HfO₂/GeO x gate stack through thermal annealing. The diffusing of GeO into the HfO₂ layer led to the mixing of the GeO x and HfO₂ layers, as identified through energy-dispersive X-ray Spectroscopy (EDX). X-ray photo-electron spectroscopy (XPS) data for HfGeO x IL confirmed the formation of Ge-O-Hf bonds owing to the induced shift of the Ge3d ox spectra to lower binding energies. The electrical and reliability data indicated that the capacitor with HfGeO x IL presented not only lower interface states density (Dit, approximately 7 × 10 11 eV -1 cm -2 ) but also less Dit increment (approximately 3 × 10 11 eV -1 cm -2 ) after stressing than did the capacitor without the HfGeO x IL. Moreover, the Ge p-metal-oxide-semiconductor field-effect transistor HfGeO x IL exhibited a high effective hole mobility (approximately 704 cm2/V s).

We report a low current collapse GaN-based high electron mobility transistor (HEMT) with an excellent thermal stability at 150 °C. The AlN was grown by N 2 -based plasma enhanced atomic layer deposition (PEALD) and shown a refractive index of 1.94 at 633 nm of wavelength. Prior to deposit AlN on III-nitrides, the H 2 /NH 3 plasma pre-treatment led to remove the native gallium oxide. The X-ray photoelectron spectroscopy (XPS) spectroscopy confirmed that the native oxide can be effectively decomposed by hydrogen plasma. Following the in situ ALD-AlN passivation, the surface traps can be eliminated and corresponding to a 22.1% of current collapse with quiescent drain bias (V DSQ ) at 40 V. Furthermore, the high temperature measurement exhibited a shift-free threshold voltage (V th ), corresponding to a 40.2% of current collapse at 150 °C. The thermal stable HEMT enabled a breakdown voltage (BV) to 687 V at high temperature, promising a good thermal reliability under high power operation.

High-frequency operation with ultrathin, lightweight, and extremely flexible semiconducting electronics is highly desirable for the development of mobile devices, wearable electronic systems, and defense technologies. In this work, the experimental observation of quasi-heterojunction bipolar transistors utilizing a monolayer of the lateral WSe 2 -MoS 2 junctions as the conducting p-n channel is demonstrated. Both lateral n-p-n and p-n-p heterojunction bipolar transistors are fabricated to exhibit the output characteristics and current gain. A maximum common-emitter current gain of around 3 is obtained in our prototype two-dimensional quasi-heterojunction bipolar transistors. Interestingly, we also observe the negative differential resistance in the electrical characteristics. A potential mechanism is that the negative differential resistance is induced by resonant tunneling phenomenon due to the formation of quantum well under applying high bias voltages. Our results open the door to two-dimensional materials for high-frequency, high-speed, high-density, and flexible electronics.

The experimental observation of band-to-band tunneling in novel tunneling field-effect transistors utilizing a monolayer of MoS 2 as the conducting channel is demonstrated. Our results indicate that the strong gate-coupling efficiency enabled by two-dimensional materials, such as monolayer MoS 2 , results in the direct manifestation of a band-to-band tunneling current and an ambipolar transport., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Vertical hot electron transistors incorporating atomically-thin 2D materials, such as graphene or MoS2, in the base region have been proposed and demonstrated in the development of electronic and optoelectronic applications. To the best of our knowledge, all previous 2D material-base hot electron transistors only considered applying a positive collector-base potential (VCB > 0) as is necessary for the typical unipolar hot-electron transistor behavior. Here we demonstrate a novel functionality, specifically a dual-mode operation, in our 2D material-base hot electron transistors (e.g. with either graphene or MoS2 in the base region) with the application of a negative collector-base potential (VCB < 0). That is, our 2D material-base hot electron transistors can operate in either a hot-electron or a reverse-current dominating mode depending upon the particular polarity of VCB. Furthermore, these devices operate at room temperature and their current gains can be dynamically tuned by varying VCB. We anticipate our multi-functional dual-mode transistors will pave the way towards the realization of novel flexible 2D material-based high-density and low-energy hot-carrier electronic applications.

AMP-activated protein kinase (AMPK) serves as an energy-sensing protein kinase that is activated by a variety of metabolic stresses that lower cellular energy levels. When activated, AMPK modulates a network of metabolic pathways that result in net increased substrate oxidation, generation of reduced nucleotide cofactors, and production of ATP. AMPK is activated by a high AMP:ATP ratio and phosphorylation on threonine 172 by an upstream kinase. Recent studies suggest that mechanisms that do not involve changes in adenine nucleotide levels can activate AMPK. Another sensor of the metabolic state of the cell is the NAD/NADH redox potential. To test whether the redox state might have an effect on AMPK activity, we examined the effect of beta-NAD and NADH on this enzyme. The recombinant T172D-AMPK, which was mutated to mimic the phosphorylated state, was activated by beta-NAD in a dose-dependent manner, whereas NADH inhibited its activity. We explored the effect of NADH on AMPK by systematically varying the concentrations of ATP, NADH, peptide substrate, and AMP. Based on our findings and established activation of AMPK by AMP, we proposed a model for the regulation by NADH. Key features of this model are as follows. (a) NADH has an apparent competitive behavior with respect to ATP and uncompetitive behavior with respect to AMP resulting in improved binding constant in the presence of AMP, and (b) the binding of the peptide is not significantly altered by NADH. In the absence of AMP, the binding constant of NADH becomes higher than physiologically relevant. We conclude that AMPK senses both components of cellular energy status, redox potential, and phosphorylation potential.

Beta-amyloid peptides (Abeta) are produced by a sequential cleavage of amyloid precursor protein (APP) by beta- and gamma-secretases. The lack of Abeta production in beta-APP cleaving enzyme (BACE1)(-/-) mice suggests that BACE1 is the principal beta-secretase in mammalian neurons. Transfection of human APP and BACE1 into neurons derived from wild-type and BACE1(-/-) mice supports cleavage of APP at the canonical beta-secretase site. However, these studies also revealed an alternative BACE1 cleavage site in APP, designated as beta', resulting in Abeta peptides starting at Glu11. The apparent inability of human BACE1 to make this beta'-cleavage in murine APP, and vice versa, led to the hypothesis that this alternative cleavage was species-specific. In contrast, the results from human BACE1 transgenic mice demonstrated that the human BACE1 is able to cleave the endogenous murine APP at the beta'-cleavage site. To address this discrepancy, we designed fluorescent resonance energy transfer peptide substrates containing the beta- and beta'-cleavage sites within human and murine APP to compare: (i) the enzymatic efficiency; (ii) binding kinetics of a BACE1 active site inhibitor LY2039911; and (iii) the pharmacological profiles for human and murine recombinant BACE1. Both BACE1 orthologs were able to cleave APP at the beta- and beta'-sites, although with different efficiencies. Moreover, the inhibitory potency of LY2039911 toward recombinant human and native BACE1 from mouse or guinea pig was indistinguishable. In summary, we have demonstrated, for the first time, that recombinant BACE1 can recognize and cleave APP peptide substrates at the postulated beta'-cleavage site. It does not appear to be a significant species specificity to this cleavage.

The Pkc1-mediated cell wall integrity-signaling pathway is highly conserved in fungi and is essential for fungal growth. We thus explored the potential of targeting the Pkc1 protein kinase for developing broad-spectrum fungicidal antifungal drugs through a Candida albicans Pkc1-based high-throughput screening. We discovered that cercosporamide, a broad-spectrum natural antifungal compound, but previously with an unknown mode of action, is actually a selective and highly potent fungal Pkc1 kinase inhibitor. This finding provides a molecular explanation for previous observations in which Saccharomyces cerevisiae cell wall mutants were found to be highly sensitive to cercosporamide. Indeed, S. cerevisiae mutant cells with reduced Pkc1 kinase activity become hypersensitive to cercosporamide, and this sensitivity can be suppressed under high-osmotic growth conditions. Together, the results demonstrate that cercosporamide acts selectively on Pkc1 kinase and, thus, they provide a molecular mechanism for its antifungal activity. Furthermore, cercosporamide and a beta-1,3-glucan synthase inhibitor echinocandin analog, by targeting two different key components of the cell wall biosynthesis pathway, are highly synergistic in their antifungal activities. The synergistic antifungal activity between Pkc1 kinase and beta-1,3-glucan synthase inhibitors points to a potential highly effective combination therapy to treat fungal infections.

A gene (mgt) encoding a monofunctional glycosyltransferase (MGT) from Staphylococcus aureus has been identified. This first reported gram-positive MGT shared significant homology with several MGTs from gram-negative bacteria and the N-terminal glycosyltransferase domain of class A high-molecular-mass penicillin-binding proteins from different species. S. aureus MGT contained an N-terminal hydrophobic domain perhaps involved with membrane association. It was expressed in Escherichia coli cells as a truncated protein lacking the hydrophobic domain and purified to homogeneity. Analysis by circular dichroism revealed that secondary structural elements of purified truncated S. aureus MGT were consistent with predicted structural elements, indicating that the protein might exhibit the expected folding. In addition, purified S. aureus MGT catalyzed incorporation of UDP-N-acetylglucosamine into peptidoglycan, proving that it was enzymatically active. MGT activity was inhibited by moenomycin A, and the reaction product was sensitive to lysozyme treatment. Moreover, a protein matching the calculated molecular weight of S. aureus MGT was identified from an S. aureus cell lysate using antibodies developed against purified MGT. Taken together, our results suggest that this enzyme is natively present in S. aureus cells and that it may play a role in bacterial cell wall biosynthesis.

The cyclin D1.CDK4-pRb (retinoblastoma protein) pathway plays a central role in the cell cycle, and its deregulation is correlated with many types of cancers. As a major drug target, we purified dimeric cyclin D1.CDK4 complex to near-homogeneity by a four-step procedure from a recombinant baculovirus-infected insect culture. We optimized the kinase activity and stability and developed a reproducible assay. We examined several catalytic and kinetic properties of the complex and, via steady-state kinetics, derived a kinetic mechanism with a peptide (RbING) and subsequently investigated the mechanistic implications with a physiologically relevant protein (Rb21) as the phosphoacceptor. The complex bound ATP 130-fold tighter when Rb21 instead of RbING was used as the phosphoacceptor. By using staurosporine and ADP as inhibitors, the kinetic mechanism of the complex appeared to be a "single displacement or Bi-Bi" with Mg2+.ATP as the leading substrate and phosphorylated RbING as the last product released. In addition, we purified a cyclin D1-CDK4 fusion protein to homogeneity by a three-step protocol from another recombinant baculovirus culture and observed similar kinetic properties and mechanisms as those from the complex. We attempted to model staurosporine in the ATP-binding site of CDK4 according to our kinetic data. Our biochemical and modeling data provide validation of both the complex and fusion protein as highly active kinases and their usefulness in antiproliferative inhibitor discovery.

The serine hydroxymethyltransferase (SHMT) gene glyA was over-expressed in Escherichia coli and the enzyme was purified to near homogeneity. Reaction conditions for E. coli and rabbit liver SHMTs were optimized using succinic semialdehyde methyl ester (SSAME) and glycine. The catalytic efficiency (kcat/K(m)) of E. coli SHMT for SSAME was 2.8-fold higher than that of rabbit liver enzyme. E. coli SHMT displayed a pH-dependent product distribution different from that of rabbit liver enzyme. For the pyridoxal-5'-phosphate (PLP)-dependent reaction, E. coli and rabbit liver SHMTs showed a high product diastereospecificity. The stoichiometric ratio of PLP to the dimeric E. coli SHMT was 0.5-0.7, indicating a requirement for external PLP for maximal activity. Using SSAME or its analog at a high temperature, E. coli SHMT mediated efficient condensation via a lactone pathway. In contrast, at a low temperature, the enzyme catalyzed efficient conversion of 4-penten-1-al via a non-lactone mechanism. Efficient conversion of either aldehyde type to a desirable diastereospecific product was observed at a pilot scale. E. coli SHMT exhibited a broad specificity toward aldehyde substrates; thus it can be broadly useful in chemo-enzymatic synthesis of a chiral intermediate in the manufacture of an important carbacephem antibiotic.

The case studies focus on two types of enzyme applications for pharmaceutical development. Demethylmacrocin O-methyltransferase, macrocin O-methyltransferase (both putatively rate-limiting) and tylosin reductase were purified from Streptomyces fradiae, characterized and the genes manipulated for increasing tylosin biosynthesis in S. fradiae. The rate-limiting enzyme, deacetoxycephalosporin C (DAOC) synthase/hydroxylase (expandase/ hydroxylase), was purified from Cephalosporium acremonium, its gene over-expressed, and cephalosporin C biosynthesis improved in C. acremonium. Also, heterologous expression of penicillin N epimerase and DAOC synthase (expandase) genes of Streptomyces clavuligerus in Penicillium chrysogenum permitted DAOC production in the fungal strain. Second, serine hydroxymethyltransferase of Escherichia coli and phthalyl amidase of Xanthobacter agilis were employed in chemo-enzymatic synthesis of carbacephem. Similarly, echinocandin B deacylase of Actinoplanes utahensis was used in the second-type synthesis of the ECB antifungal agent.

To understand the biochemical basis of resistance of bacteria to beta-lactam antibiotics, we purified a penicillin-resistant penicillin-binding protein 2x (R-PBP2x) and a penicillin-sensitive PBP2x (S-PBP2x) enzyme of Streptococcus pneumoniae and characterized their transpeptidase activities, using a thioester analog of stem peptides as a substrate. A comparison of the k(cat)/Km values for the two purified enzymes (3,400 M(-1) s(-1) for S-PBP2x and 11.2 M(-1) s(-1) for R-PBP2x) suggests that they are significantly different kinetically. Implications of this finding are discussed. We also found that the two purified enzymes did not possess a detectable level of beta-lactam hydrolytic activity. Finally, we show that the expression levels of both PBP2x enzymes were similar during different growth phases.

A DNA fragment was identified and cloned from Staphylococcus epidermidis (Se) using femA from S. aureus (Sa) as a heterologous hybridization probe. DNA sequence analysis of a portion of this clone revealed two complete ORFs highly related to femA and femB of Sa. The genomic arrangement of the Se femA/B complex was nearly identical to that observed in Sa. Intra- and interspecies relatedness of these genes and conservation of genomic organization were consistent with gene duplication of one of these genes in an ancestral organism. Recombinant FEMA, produced in Escherichia coli (Ec), was purified to near homogeneity. Identity of the purified protein was verified by N-terminal amino acid (aa) sequence analysis.

The gene for bifunctional deacetoxycephalosporin C synthetase/hydroxylase of Cephalosporium acremonium was cloned and overexpressed as an insoluble and inactive enzyme in granules of recombinant Escherichia coli. About 40-60% of expected synthetase activity along with 50-80% protein purity could be recovered directly from granular extracts with only a single empirically optimized refolding step. Further purification to homogeneity was achieved by a single anion-exchange-chromatographic step in the presence of denaturing concentrations of urea. The main obstacle to converting the homogeneous unfolded protein into the active enzyme was a urea-dependent aggregation during refolding that led to irreversible enzyme inactivation. Information obtained from refolding studies using gel-filtration HPLC, fluorescence spectroscopy and disulphide analysis led to an optimal enzyme refolding scheme that resulted in a highly active (i.e. 65-75% of the expected activity) and moderately stable fungal synthetase/hydroxylase.

We investigated the enzymatic acylation of penicillin-binding protein 2a (PBP 2a) from methicillin-resistant Staphylococcus aureus by beta-lactams. Using a purified, soluble form of the protein (PBP 2a'), we observed beta-lactam-induced in vitro precipitation following first-order kinetics with respect to protein concentration. We used electrospray mass ionization spectrometry to show that the protein precipitate predominantly contained PBP 2a', with the beta-lactam bound to it in a 1:1 molar ratio. Using nitrocefin, a chromogenic beta-lactam, we confirmed the correlation between PBP 2a' precipitation and its beta-lactam-dependent enzymatic acylation by monitoring the absorbance associated with the precipitate. Finally, dissolving the precipitate in urea, we developed a simple in vitro chromogenic assay to monitor beta-lactam-dependent enzymatic acylation of PBP 2a'. This assay represents a significant improvement over the traditional radioactive penicillin-binding assay.

Serine hydroxymethyltransferase (SHMT) expressed in Escherichia coli was analyzed in fermentation broth through the use of capillary electrophoresis (CE), a method which provided advantages over the traditional techniques of slab gel electrophoresis and chromatography. In addition, via CE the difficult resolution and quantitation of SHMT holoenzyme and apoenzyme were achieved. Using this method, a pyridoxal-5'-phosphate (PLP) cofactor/SHMT dimer molar ratio of 0.65 was estimated to be present in holoenzyme in the absence of excess PLP. This determination correlated well with results obtained by other techniques, including electrospray ionization mass spectrometry (ESI-MS). CE and ESI-MS analyses both provided evidence for significant differences between the folded conformations of SHMT holoenzyme and apoenzyme.

A hybrid cefE gene, encoding penicillin N expandase, was constructed by fusing the promoter sequences, Pcp, and terminator sequences, Pct from the Penicillium chrysogenum pcbC gene to the open reading frame (orf), cefEorf, from the Streptomyces clavuligerus cefE gene. The resulting hybrid gene, Pcp/cefE'orf/Pct, differed from a previously reported hybrid cefE gene contained on plasmid pPS65. The latter gene, Pcp/cefE'orf/Sct, contained the Pcp sequences fused to the S. clavuligerus cefE orf still attached to the S. clavuligerus terminator sequences, Sct. The new hybrid gene was transformed into P. chrysogenum on plasmid vector pRH6. Transformants were selected by phleomycin resistance conferred by a hybrid ble gene present on plasmid pRH6. The hybrid ble gene was formed by attaching Pcp sequences to the ble orf. Among transformants obtained with pRH6, one exhibited a 70-fold higher level of activity of penicillin N expandase than the best transformant previously obtained from a 10-fold larger population of pPS65 transformants. The penicillin N expandase activity in pRH6 transformant, 9EN-5-1, was fourfold higher than the activity in the S. clavuligerus strain used as the source of the cefE orf and 75% of the activity observed in an industrial strain of Cephalosporium acremonium. Sequencing of the junctions of the heterologous DNA in Pcp/cefEorf/Pct uncovered a modification of the cefE open reading frame introduced during construction of the hybrid gene; the modified open reading frame is designated cefE'orf.

Intrinsic resistance toward beta-lactams in methicillin-resistant Staphylococcus aureus strains, a major source of nosocomial infections, is believed to be caused mainly by penicillin-binding protein 2a (PBP2a). This protein resembles other penicillin-binding proteins that are involved in bacterial cell wall biosynthesis and are the targets of active site acylation by beta-lactam antibiotics. PBP2a, however, presumably remains active at therapeutic concentrations of beta-lactams. In this paper, we describe a three-step purification of a soluble form of PBP2a (PBP2a') to apparent homogeneity using anion-and cation-exchange, and dye-ligand affinity chromatographies. Purified PBP2a' was a 74-kDa monomeric protein that appeared to be folded. The protein was evaluated for its enzymatic acylation with beta-lactams initially by fluorescence quenching and then kinetically by radioactive labeling. Using a modified 125I-labeled penicillin V-acylation assay, the apparent Km of PBP2a' for penicillin V was 1.2 mM. Three other beta-lactams, each of which exhibited significant fluorescence quenching, acted as strong competitive inhibitors of penicillin V with apparent Ki values of 123.4, 36.1, and 12.4 microM, respectively. By a new beta-lactam preincubation analysis, these compounds could function as substrates with similar Km values. Also, the acylation rates of different beta-lactams could be readily ascertained. The enzymatic acylation data substantiate the major causative role of PBP2a in the bacterial resistance. The quantitative radioactive acylation assays are potentially useful in screening for a potent inhibitor of the enzyme.

A reductase of Streptomyces fradiae was speculated to catalyze reduction of tylosin to relomycin, an industrially undesirable product. The activity of tylosin reductase was closely related to bacterial growth, suggesting involvement of the enzyme in a primary metabolism. The reductase activity was improved significantly in vivo and in vitro. The enzyme was also partially stabilized in vitro. Using a simple five-step chromatographic procedure, the reductase was purified 480-fold to apparent homogeneity. The purified reductase had a molecular mass of 270 kDa and consisted of two different subunits of 26 and 7 kDa at 1:1 ratio. The enzyme exhibited an absorption maximum at 405 nm and was inhibited by exogenous FAD or FMN, indicating a flavin as its prosthetic group. Tylosin reductase was optimally active at pH 7.0-7.2 and 40 degrees C with NADPH as a preferred electron donor. The Km of the enzyme for tylosin was 1.4 mM and that for NADPH was 0.15 mM. The Vmax for the enzymatic reaction was 917 mumol of tylosin formed/min/mg protein. The enzymatic conversion of tylosin to relomycin was coupled to that of NADPH to NADP+ at a stoichiometric ratio of 1:1. Tylosin reductase showed a broad substrate specificity toward all macrolide aldehydes (as normal and shunt metabolites of tylosin biosynthesis) tested. Thus, the enzyme may have a physiological role of macrolide detoxification for the bacterium.

Deacetoxycephalosporin C hydroxylase from cell-free extracts of Streptomyces clavuligerus was stabilized partially and purified to near homogeneity by three anion-exchange chromatographies, ammonium sulfate fractionation, and two gel filtrations. The hydroxylase was a monomer with a Mr of 35,000-38,000. alpha-Ketoglutarate, ferrous iron, and molecular oxygen were required for the enzyme activity. The hydroxylase was optimally active between pH 7.0 and 7.4 in a 3-(N-morpholino)propanesulfonic acid buffer and at 29 degrees C. It was stimulated by a reducing agent, particularly dithiothreitol or reduced glutathione, and ATP. The requirement for ferrous ion was specific, and at least one sulfhydryl group was apparently essential for the enzymatic hydroxylation. The Km values of the hydroxylase for deacetoxycephalosporin C and alpha-ketoglutarate were 59 and 10 microM, respectively, and the Ka for ferrous ion was 20 microM. In addition to its known hydroxylation of deacetoxycephalosporin C to deacetylcephalosporin C, the hydroxylase catalyzed effectively an analogous hydroxylation of 3-exomethylenecephalosporin C to deacetoxycephalosporin C. Surprisingly, the hydroxylase also mediated slightly a novel ring-expansion of penicillin N to deacetoxycephalosporin C. The substrate specificity of the hydroxylase is overlapping with but distinguishable from that of deacetoxycephalosporin C synthase, the enzyme which normally mediates the ring-expansion reaction (Dotzlaf, J. E., and Yeh, W. K. (1989) J. Biol. Chem. 264, 10219-10227). Furthermore, the hydroxylase exhibited an extensive sequence similarity to the synthase. Thus, the two enzymes catalyzing the consecutive reactions for cephamycin C biosynthesis in S. clavuligerus represent apparent products from a divergent evolution.

A hybrid cefE gene was constructed by juxtaposing promoter sequences from the Penicillium chrysogenum pcbC gene to the open reading frame of the Streptomyces clavuligerus cefE gene. In S. clavuligerus the cefE gene codes for the enzyme penicillin N expandase [also known as deacetoxycephalosporin C synthetase (DAOCS)]. To insert the hybrid cefE gene into P. chrysogenum the vector pPS65 was constructed; pPS65 contains the hybrid cefE gene and the Aspergillus nidulans amdS gene. The amdS gene encodes acetamidase and provides for dominant selection in P. chrysogenum. Protoplasts of P. chrysogenum were transformed with pPS65 and selected for the ability to grow on acetamide medium. Extracts of cells cultivated in penicillin production medium were analyzed for penicillin N expandase activity. Penicillin N expandase activity was detected in approximately one-third of the transformants tested. Transformants WG9-69C-01 and WG9-61L-03 had the highest specific activities of penicillin N expandase: 4.3% and 10.3%, respectively, relative to the amount of penicillin N expandase in S. clavuligerus. Untransformed P. chrysogenum exhibited no penicillin N expandase activity. Analysis of the penicillin V titer revealed that WG9-61L-03 produced titers equal to that of the recipient strain while the amount of penicillin V produced in WG9-69C-01 was reduced by five fold.

Muconolactone isomerase (EC 5.3.3.4) and beta-ketoadipate enol-lactone hydrolase (EC 3.1.1.24) mediate consecutive catabolic steps in bacteria. Separately inducible beta-ketoadipate enol-lactone hydrolases I and II are formed in representatives of Acinetobacter calcoaceticus. When subjected to DEAE-cellulose chromatography, Acinetobacter enol-lactone hydrolase I displays heterogeneous behavior which, in whole or in part, appears to be due to modifications of sulfhydryl groups in the protein; the enzyme is unusual in that its NH2-terminal amino acid is cysteine. Comparison of the NH2-terminal amino acid sequence of Acinetobacter enollactone hydrolase I, reported here, with the corresponding amino acid sequences of Acinetobacter enollactone hydrolase II and Pseudomonas enol-lactone hydrolase indicates that all three proteins have diverged widely from a common evolutionary origin. Sequence comparisons suggest that divergence of the Acinetobacter enol-lactone hydrolase structural genes was achieved by substitution with DNA derived from an ancestral muconolactone isomerase structural gene.

gamma-Carboxymuconolactone decarboxylase (EC 4.1.1.44) from Azotobacter vinelandii resembled the isofunctional enzymes from Acinetobacter calcoaceticus and Pseudomonas putida. All three decarboxylases appeared to be hexamers formed by association of identical subunits of about 13,300 daltons. The A. vinelandii and P. putida decarboxylases cross-reacted immunologically with each other, and the NH2-terminal amino acid sequences of the enzymes differed in no more than 7 of the first 36 residues. In contrast, the A. calcoaceticus decarboxylase did not cross-react with the decarboxylase from A. vinelandii or P. putida; the NH2-terminal amino acid sequences of these enzymes diverged about 50% from the NH2-terminal amino acid sequence of the A. calcoaceticus decarboxylase.

Muconolactone delta-isomerase (EC 5.3.3.4) and beta-ketoadipate enol-lactone hydrolase (EC 3.1.1.24) mediate consecutive reactions in the beta-ketoadipate pathway of bacteria. An earlier investigation (Yeh, W.K., Davis, G., Fletcher, P., and Ornston, L.N. (1978) J. Biol. Chem. 253, 4920-4923) revealed that the respective NH2-terminal amino acid sequences of Pseudomonas putida muconolactone isomerase and Acinetobacter calcoaceticus beta-ketoadipate enol-lactone hydrolase II are evolutionarily homologous. In this report, we describe the purification of Pseudomonas beta-ketoadipate enol-lactone hydrolase and present evidence indicating that the protein is a trimer composed of identical 11,000-dalton subunits. The NH2-terminal amino acid sequences of Pseudomonas muconolactone isomerase and Pseudomonas enol-lactone hydrolase have diverged widely from each other, yet the two sequences contain different fragments of an ancestral sequence which is represented in Acinetobacter enol-lactone hydrolase II. The widely divergent Pseudomonas muconolactone isomerase and Pseudomonas enol-lactone hydrolase sequences each contain unique sets of repeated peptides. In principle, the repetitive sequences might have been introduced by elongation mutations which occurred early in the evolution of the proteins. However, the divergence of Pseudomonas muconolactone isomerase and Pseudomonas enol-lactone hydrolase is so extreme that the observed sequence repetitions cannot have been conserved from ancestral duplication mutations. Rather, the data favor the interpretation that copies of DNA were substituted into structural genes for the enzymes as they diverged.

gamma-Carboxymuconolactone decarobxylase (EC 4.1.1.44) and muconolactone isomerase (EC 5.3.3.4) mediate chemically analogous reactions in bacteria. The enzymes are inducible, and different metabolites trigger the respective syntheses of the decarboxylases in Acinetobacter calcoaceticus and Pseudomonas putida. The decarobxylases share similar oligomeric structures in which identical subunits of about 13,300 daltons appear to be self-associated into hexamers. Identical residues are found in 18 of the first 36 positions of the enzymes' NH2-terminal amino acid sequences. Thus, genetic rearrangements appear to have placed homologous structural genes for the decarboxylases under different transcriptional control in the two bacterial species. The NH2-terminal amino acid sequences of the decarboxylases and muconolactone isomerases are similar, suggesting that a common ancestral protein gave rise to the enzymes with different (albeit analogous) activities. In addition, the NH2-terminal amino acid sequences of the decarboxylases appear to have been conserved at a second region within the primary structure of the muconolactone isomerases. As has been observed with the two enol-lactone hydrolases (EC 3.1.3.24) of Acinetobacter, the structural genes for the decarboxylases and the isomerases appear to have diverged widely as they were co-selected within a single cell line, In part the divergence appears to have been achieved by mutations in which fragments of DNA within structural genes are replaced with fragments of DNA derived from a co-evolving sequence.

Comparison of the amino acid compositions of purified proteins indicates the presence of overlapping evolutionary affinities among enzymes of the beta-ketoadipate pathway. Isofunctional enzymes from different bacterial genera share a common evolutionary origin. Moreover, enzymes that mediate isofunctional or chemically analogous reactions within an organism appear to be evolutionarily homologous. Most remarkably, closely similar amino acid compositions are found in enzymes that mediate the following consecutive metabolic steps: lactonization, decarboxylation, hydrolysis, and transfer of a thioester bond.

A high-performance liquid chromatographic (HPLC) procedure was developed to assay S-adenosyl-L-methionine: macrocin O-methyltransferase. This enzyme catalyzes the rate-limiting terminal reaction of tylosin biosynthesis in Streptomyces fradiae. HPLC analysis was improved by resin treatment of cell-free extracts to remove endogenous tylosin and related compounds. Relomycin was selected as an internal standard and the enzymatic reaction conditions were optimized. The reaction mixture was extracted with ethyl acetate to recover the substrate, product and the internal standard. Efficient separation of the macrolide antibiotics was provided by ion-pair reversed-phase HPLC. An average relomycin recovery was 90%. The O-methyltransferase activity could be routinely and reproducibly determined by monitoring tylosin formation at 285 nm.

Cells of Pseudomonas putida, after growth with toluene, contain a multicomponent enzyme system that oxidizes toluene to (+)-1(S),2(R)-dihydroxy-3-methyl-cyclohexa-3,5-diene. One of these components has been purified to homogeneity and shown to be a flavoprotein that contains FAD as the only detectable prosthetic group. Fad was removed from the enzyme during purification. However, equilibrium dialysis experiments showed that the enzyme can bind one mol of FAD/mol of enzyme protein. The apparent molecular weight of the enzyme is 46,000, as judged by gel filtration and polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate and mercaptoethanol. The latter result suggests the presence of a single polypeptide chain. The amino acid composition of the enzyme reveals a relatively high content of the hydrophobic amino acids leucine, isoleucine, and valine and is remarkably similar in composition to the flavoproteins that function in certain monooxygenase enzyme systems. The purified enzyme catalyzes the reduction of dichloroindophenol, nitrobluetetrazolium, ferricyanide, and ferredoxinTOL. Its ability to reduce cytochrome c and to function in the toluene dioxygenase enzyme system is absolutely dependent on the presence of ferredoxinTOL.

beta-Ketoadipate enol-lactone hydrolase (EC 3.1.1.24) and succinyl CoA: beta-ketoadipate transferase (EC 2.8.3.6) catalyze consecutive metabolic reactions in bacteria. The enzymes appear to be members of different families of related proteins. Enzymes within the enol-lactone hydrolase family appear to have diverged so extensively that common ancestry sometimes is not directly evident from comparison of NH2-terminal amino acid sequences of the proteins. Amino acid sequences at or near the active sites of the enzymes are likely to have been conserved, and hence a chemical proble that reacted specifically near the active sites of the enzymes might identify regions of amino acid sequence in which evolutionary affinities among widely divergent proteins could be identified. p-Chloromercuribenzoate appears to be such a probe because enol-lactone hydrolases and CoA transferases from Acinetobacter calcoaceticus and Pseudomonas putida were completely inhibited by stoichiometric quantities of the compound which appears to modify selectively cysteinyl side chains at or near the active sites of the enzymes. Stoichiometric inhibition of P. putida enol-lactone hydrolase was observed in the presence of excess dithiothreitol; therefore the reactive cysteinyl residue in this enzyme appears to be nucleophilic. The hydrolase is inhibited by beta-ketoadipate, but the compound must be supplied at 10 mM concentrations in order to achieve 50% inhibition, so the product inhibition is unlikely to be significant under physiological conditions.

Deacetoxycephalosporin C synthetase (expandase), which catalyzes ring expansion of penicillin N to deacetoxycephalosporin C (DAOC), has been stabilized in vitro and purified to near homogeneity from the industrially important fungus Cephalosporium acremonium. Throughout the purification, the expandase activity remained physically associated with and in a constant ratio of 7:1 to DAOC hydroxylase activity. The latter activity mediates hydroxylation of DAOC to deacetylcephalosporin C (DAC). The copurified expandase/hydroxylase appeared to be monomeric, with a molecular weight of 41,000 +/- 2,000 and an isoelectric point of 6.3 +/- 0.3. Both catalytic activities required alpha-ketoglutarate, Fe2+, and O2 and were stimulated by ascorbate, dithiothreitol, and ATP. The Fe2+ requirement was specific, and sulfhydryl groups in the purified protein were apparently essential for both ring expansion and hydroxylation. The kinetics and stoichiometry of DAOC/DAC formation from the expandase/hydroxylase-catalyzed reactions suggested that ring expansion of penicillin N preceded hydroxylation of DAOC.

A putatively rate-limiting synthase (expandase) of Streptomyces clavuligerus was stabilized in vitro and purified 46-fold from cell-free extracts; a major enriched protein with a Mr of 35,000 was further purified by electrophoretic elution. Based on a 22-residue amino-terminal sequence of the protein, the synthase gene of S. clavuligerus was cloned and expressed in Escherichia coli (Kovacevic, S., Weigel, B.J., Tobin, M.B., Ingolia, T.D., and Miller, J. R. (1989) J. Bacteriol. 171, 754-760). The synthase protein was detected mainly from granules of recombinant E. coli. The recombinant synthase was solubilized from the granules by urea, and for the first time a highly active synthase was purified to near homogeneity. The synthase was a monomer with a Mr of 34,600 and exhibited two isoelectric points of 6.1 and 5.3. Its catalytic activity required alpha-ketoglutarate, Fe2+, and O2, was stimulated by dithiothreitol or ascorbate but not by ATP, and was optimal at pH 7.0 in 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid buffer and at 36 degrees C. The Fe2+ requirement was specific, and at least one sulfhydryl group in the purified enzyme was apparently essential for the ring expansion. The Km values of the enzyme for penicillin N and alpha-ketoglutarate were 29 and 18 microM, respectively, and the Ka for Fe2+ was 8 microM. The recombinant synthase was indistinguishable from the native synthase of S. clavuligerus by those biochemical properties. In addition to the enzymic ring expansion of penicillin N to deacetoxycephalosporin C, the recombinant synthase catalyzed a novel hydroxylation of 3-exomethylenecephalosporin C to deacetylcephalosporin C.

Recurring patterns of primary structure have been observed in enzymes that mediate sequential metabolic reactions in bacteria. The enzymes, muconolactone Delta-isomerase [(+)-4-hydroxy-4-carboxymethylisocrotonolactone Delta(2)-Delta(3)-isomerase, EC 5.3.3.4] and beta-ketoadipate enol-lactone hydrolase [4-carboxymethylbut-3-enolide(1,4)enol-lactone-hydrolase, EC 3.1.1.24], have been coselected in bacterial populations because the isomerase can confer no nutritional advantage in the absence of the hydrolase. Similar amino acid sequences recur within the structure of the isomerase, and the amino-terminal amino acid sequence of the isomerase from Pseudomonas putida appears to be evolutionarily homologous with the corresponding sequence of a beta-ketoadipate enol-lactone hydrolase from Acinetobacter calcoaceticus. One interpretation of the sequence repetitions is that they reflect tandem duplication mutations that took place early in the evolution of the proteins. According to this view, the mutations caused elongation of structural genes and the creation of duplicated genes as the metabolic pathways evolved. A review of the sequence data calls attention to a different hypothesis: repeated amino acid sequences were introduced in the course of the proteins' evolution by substitution of copies of DNA sequences into structural genes. Our observations are interpreted on the basis of a model proposing genetic exchange between misaligned DNA sequences. The model predicts that misalignments in one chromosomal region can influence the nature of mutations in another region. Thus, as often has been observed, the mutability of a base pair will be determined by its location in a DNA sequence. Furthermore, the intrachromosomal recombination of DNA sequences may account for complex genetic modifications that occur as new pathways evolve. The model provides an interpretation of an apparent paradox, the rapid creation of new metabolic traits by bacterial genomes that are remarkably resistant to genetic drift.

Toluene dioxygenase oxidizes toluene to (+)-cis-1(S),2(R)-dihydroxy-3-methylcyclohexa-3,5-diene. This reaction is catalyzed by a multienzyme system that is induced in cells of Pseudomonas putida F1 during growth on toluene. One of the components of toluene dioxygenase has been purified to homogeneity and shown to be an iron-sulfur protein that has been designated ferredoxinTOL. The molecular weight of ferredoxinTOL was calculated to be 15,300, and the purified protein was shown to contain 2 g of atoms each of iron- and acid-labile sulfur which appear to be organized as a single [2Fe-2S]cluster. Solutions of ferredoxinTOL were brown in color and showed absorption maxima at 277, 327, and 460 nm. A shoulder in the spectrum of the oxidized protein was discernible at 575 nm. Reduction with sodium dithionite or NADH and ferredoxinTOL reductase resulted in a decrease in visible absorbance at 460 and 575 nm, with a concomitant shift in absorption maxima to 382 and 438 nm. The redox potential of ferredoxinTOL was estimated to be -109 mV. In the oxidized state, the protein is diamagnetic. However, upon reduction it exhibited prominent electron paramagnetic resonance signals with anisotropy in g values (gx = 1.81, gy = 1.86, and gz = 2.01). Anaerobic reductive titrations revealed that ferredoxinTOL is a one-electron carrier that accepts electrons from NADH in a reaction that is mediated by a flavoprotein (ferredoxinTOL reductase). The latter is the first component in the toluene dioxygenase system. Reduced ferredoxinTOL can transfer electrons to cytochrome c or to a terminal iron-sulfur dioxygenase (ISP-TOL) which catalyzes the incorporation of molecular oxygen into toluene and related aromatic substrates.

gamma-Carboxymuconolactone decarboxylase (EC 4.1.1.44) and beta-ketoadipate succinyl coenzyme A transferase (EC 2.8.3.6) mediate different steps in the beta-ketoadipate pathway. Antisera prepared against the Pseudomonas putida transferase cross-reacted immunologically with the decarboxylase from the same organism. The transferase is formed by association of two nonidentical protein subunits. The NH2-terminal amino acid sequences of the two nonidentical transferase subunits resembled each other and also were similar to the NH2-terminal amino acid sequence of the decarboxylase.

Similar amino acid sequences were found in portions of bacterial enzymes that mediate different biochemical transformations. Reaction catalyzed by the enzymes include oxygenation, decarboxylation, isomerization, and hydrolysis. The proteins share a common evolutionary history because they participate in an overall catabolic process known as the beta-ketoadipate pathway. One interpretation of the sequence similarities might be that duplication of a single gene gave rise to ancestral genes for the enzymes with different catalytic activities. According to this view, homologous sequences from the ancestral gene were conserved as the proteins diverged to assume different functions. This hypothesis is vitiated by comparison of the NH2-terminal amino acid sequences of sets of enzymes that mediate identical or analogous metabolic reactions within an organism. Gene duplications giving rise to the enzymes within each set must have followed duplication of a putative ancestral gene for all the sets. Yet the amino acid sequences of the proteins within each set have diverged widely, and against this background of divergence the conservation of sequences from an ancestor common to all the enzymes is unlikely. Rather, it appears that most regions of sequence similarity shared by enzymes from different sets were acquired subsequent to their divergence from any common ancestor. In some cases it appears that relatively short regions of sequence homology were achieved by mutations causing the transfer of sequence information from one set of structural genes to structural genes in another set. Alignment of homologous amino acid sequences within any single set requires the introduction of few gaps. Because gaps are required to align sequences that have been altered by the insertion of genetic material, the evidence indicates that copies of oligonucleotides were exchanged by genetic substitution among different structural genes as they coevolved.

Homogeneous beta-ketoadipate succinyl-CoA transferase (EC 2.8.3.6) preparations were obtained from extracts of Acinetobacter calcoaceticus and Pseudomonas putida. Gel filtration indicated that the respective transferases have similar molecular weights of 108,000 and 109,000; each transferase appears to have an alpha 2 beta 2 oligomeric structure formed by association of nonidentical subunits with a molecular weight of about 25,000. The subunits were separated by sodium dodecyl sulfate-gel electrophoresis, and differences in their primary structures were revealed by determination of the NH2-terminal amino acid sequences of the oligomers. The transferases cross-react immunologically and possess similar amino acid compositions. These are remarkably similar to the amino acid compositions of gamma-carboxymuconolactone decarboxylases (EC 4.1.1.44) and beta-ketoadipate enol-lactone hydrolases (EC 3.1.1.24), enzymes that mediate consecutive reactions preceding the transferase step in the beta-ketoadipate pathway.

Macrocin-O-methyltransferase (MacOMeTase) catalyzes the final enzymatic step in the biosynthesis of tylosin in Streptomyces fradiae. A 44-base mixed oligonucleotide probe containing only guanosine and cytidine in the third position of degenerate codons was synthesized based on the amino acid sequence of the amino terminus of MacOMeTase. Plaque blot hybridization to a bacteriophage lambda library and colony blot hybridization to a cosmid library of S. fradiae DNA identified recombinants that contained overlapping fragments of chromosomal DNA. The nucleotide sequence of the cloned DNA verified that the DNA contained the coding sequence for MacOMeTase. Recombinant plasmids transformed mutants blocked in tylosin biosynthesis and complemented tylF (the structural gene for MacOMeTase) and tyl mutations of eight other classes.

S-Adenosyl-L-methionine:macrocin O-methyltransferase catalyzes conversion of macrocin to tylosin, the terminal and main rate-limiting step of tylosin biosynthesis in Streptomyces fradiae. The O-methyltransferase was stabilized in vitro and purified to electrophoretic homogeneity. The purified enzyme had a molecular weight of 65,000 and consisted of two identical subunits of 32,000 with an isoelectric point of 4.5. The enzyme required Mg2+, Mn2+, or Co2+ for maximal activity and was catalytically optimal at pH 7.5-8.0 and 31 degrees C. The O-methyltransferase catalyzed the conversion of macrocin to tylosin at a stoichiometric ratio of 1:1. The enzyme also mediated conversion of lactenocin----desmycosin. The corresponding Vmax/Km ratios for the two analogous conversions were similar, and both enzymic conversions were susceptible to extensive competitive and noncompetitive inhibitions by macrolide metabolites. Steady-state kinetic studies for initial velocity, substrate analogue, and product inhibitions have allowed formulation of Ordered Bi Bi as the reaction mechanism for macrocin O-methyltransferase.

S-Adenosyl-L-methionine:demethylmacrocin O-methyltransferase catalyzes the conversion of demethylmacrocin to macrocin as the penultimate step of tylosin biosynthesis in Streptomyces fradiae. The O-methyltransferase was purified to electrophoretic homogeneity by a conventional chromatographic procedure. The purified enzyme appears to be trimeric with a molecular weight of 122,000-126,000 and a subunit size of 42,000. Its isoelectric point was 6.0. The enzyme required Mg2+ for maximal activity and was catalytically optimal at pH 7.8-8.5 and 42 degrees C. The O-methyltransferase catalyzed conversion of demethylmacrocin to macrocin at a stoichiometric ratio of 1:1. The O-methyltransferase also mediated conversion of demethyllactenocin----lactenocin. The corresponding Vmax/Km ratios for the two analogous conversions varied only slightly. Both enzymic conversions were susceptible to an extensive and identical range of metabolic inhibitions. Steady-state kinetic studies for initial velocity, substrate analogue, and product inhibitions are consistent with Ordered Bi Bi as the reaction mechanism of demethylmacrocin O-methyltransferase. Except for an identical kinetic mechanism, demethylmacrocin O-methyltransferase can be readily differentiated from macrocin O-methyltransferase by its physical and catalytic properties as well as metabolic inhibitions.

A substantial amount of information on the biosynthesis of tylosin has been obtained over the past ten years. Physiological studies and experiments with tylosin-blocked (tyl) mutants have suggested the probable pathway by which tylactone is converted to tylosin. The development of recombinant DNA methodology for streptomycetes in general, and for Streptomyces fradiae in particular, has allowed us to apply gene cloning techniques in further studies of tylosin biosynthesis in S. fradiae. The macrocin O-methyltransferase (MOMT), which catalyzes the last step in tylosin biosynthesis, was purified, and the sequence of the 35 amino acids at its amino-terminus was determined. A synthetic 44 base oligonucleotide probe was constructed on the basis of the amino acid sequence. The probe was used to identify sequences containing the MOMT structural gene in bacteriophage and cosmid libraries of S. fradiae DNA. Complementation of tyl mutants with the cloned DNA sequences identified nine tyl biosynthetic genes (tylC, D, E, F, H, J, K, L, and M) in a 42 kb stretch of DNA. Genes complementing four mutant classes, tylA, B, G, and I were not found. A tylosin-resistance gene, tlrB, was located just left of the tyl gene cluster. Tylosin-sensitive mutants of S. fradiae, which were isolated from regenerated protoplasts and which have pleiotropic deficiencies in tylosin biosynthesis, contained deletions which included at least some of the identified tyl loci and one or both of two tylosin-resistance genes, tlrB and tlrC. Possible schemes for the functional organization of the tyl region of the S. fradiae genome are discussed.