Search

Thermal conductive polymer composite prepared by 3D printing technology, which has a highly vertically oriented carbon fiber structure.

Based on a typical project in an altered rock area, this study carried out numerical simulations using the FLAC3D software to calculate the changes in the stress field, deformation field, and plastic zone of the surrounding rock during the unsupported and supported excavation of a water transfer tunnel. The degree of alteration of the surrounding rock was considered as the base point. The following results were obtained: in the unsupported state, the tunnel surrounding rock was affected by different degrees of alteration, and compressive stress concentration appeared within a certain range at the bottom of the chamber. The value of all-directional stress decreased with the deepening of the degree of alteration, while the opposite was the case for the depth of influence. The displacement changes at the bottom and side walls of the chamber were large and increased significantly with the deepening of the degree of alteration; the displacement monitoring points distributed around the tunnel exhibited the same deformation trend. The plastic zone of the surrounding rock obviously expanded as the degree of alteration deepened. The stress, deformation field, and plastic zone of the tunnel surrounding rock were effectively controlled after the adoption of support measures. The results obtained by this study can be used as a reference for similar projects in altered rock areas.

Correction for ‘Ultrahigh thermal conductive polymer composites by the 3D printing induced vertical alignment of carbon fiber’ by Zhenbang Zhang et al., J. Mater. Chem. A, 2023, https://doi.org/10.1039/D3TA01676E.

Water acquisition via the root system of woody species is a key factor governing plant physiology. In order to compare the impact of water acquisition on the hydraulic and photosynthetic characteristics of different-sized Populus euphratic, which is a desert riparian tree species, we quantified leaf hydraulic conductance (KL), stomatal conductance (gs), net photosynthetic rate (PN), predawn and midday leaf water potential (Ψ), and the stem δ18O of the saplings and mature trees. The results showed that the saplings had a lower predawn leaf water potential (Ψpd) and soil-to-leaf water potential gradient (ΔΨ) and a higher KL than the mature trees but had a similar gs and PN to the mature trees. In arid zones, probably due to root limitation, the saplings were more likely to use unreliable topsoil water (80 cm) and groundwater due to having deeper root systems. The unreliability of the water supply might make saplings hold a higher hydraulic conductance to ensure that the water is transported efficiently to the leaves and to satisfy their transpiration need. In contrast, the mature trees, which uptake the more reliable deeper water resources, had a relatively low leaf-specific hydraulic conductance because of the increased path length versus the saplings. However, adult trees can maintain stomatal conductance by upregulating ΔΨ, thereby facilitating their ability to maintain a carbon assimilation rate similar to that of the saplings. This regulating behavior benefits mature trees’ net carbon gain, but it comes at the expense of an increased risk of hydraulic failure. These results imply that the top priority for saplings should be to maintain hydraulic system functioning, whereas, for mature trees, the priority is to assure stable net carbon gain for their growth.

Existing task offloading mechanisms are developed on some single and rigid quality of service (QoS) performance metrics, which is widely apart from satisfying the true intent of a user vehicle (UV), thereby resulting in low quality of experience (QoE), large queuing latency, and poor reliability. There is an unprecedented demand for an intent-aware task offloading strategy that provides improved QoE and guarantees reliability. In this paper, we develop a novel task offloading framework for air-ground integrated vehicular edge computing (AGI-VEC), which is called the learning-based Intent-aware Upper Confidence Bound (IUCB) algorithm. IUCB enables a UV to learn the long-term optimal task offloading strategy while satisfying the long-term ultra-reliable low-latency communication (URLLC) constraints in a best effort way under information uncertainty. IUCB can achieve three-dimension intent awareness including QoE awareness, URLLC awareness, and trajectory similarity awareness. Simulation results demonstrate that IUCB significantly outperforms existing EMM, sleeping-UCB, and UCB mechanisms in terms of QoE, end-to-end delay, queuing delay, throughput, and times of task offloading failure.

Estimation of crop water requirement (CWR) is key to the rational water use and agricultural water conservation in arid regions. Using remote sensing data to obtain long-term CWR over large areas helps water resources management in water-scarce areas. This study, taking the Kaidu-Kongqi River basin in arid northwest China as the study area, investigated the feasibility of synergistically using phenological characteristics, Savitzky-Golay filter, harmonic analysis and decision tree to extract crop planting structures (CPS) from MODIS EVI, and meanwhile analyzed the spatiotemporal variation in the estimated CWR. The results show that the integrated method for CPS identification and extraction is feasible and reliable with the classification accuracy over 80%. The mid-season stage requires the most water and cash crops need more water than cereal crops. Summer accounts for 69% the total growing season water use. The significant increase in the area of high water demand crops such as cotton raised the total CWR of the basin surging from 14.91× 108m3 in 2000 to 34.92×108m3 in 2017. The spatial distribution of CWR was more related to crop types and area than to climatic conditions. Controlling the expansion of arable land and optimizing the agricultural planting structure remain important tasks for the sustainable management of water resources in the basin.

The random distribution of graphene in epoxy matrix hinders the further applications of graphene-epoxy composites in the field of tribology. Hence, in order to fully utilize the anisotropic properties of graphene, highly aligned graphene-epoxy composites (AGEC) with horizontally oriented structure have been fabricated via an improved vacuum filtration freeze-drying method. The frictional tests results indicated that the wear rate of AGEC slowly increased from 5.19×10−6 mm3/(N·m) to 2.87×10−5 mm3/(N·m) with the increasing of the normal load from 2 to 10 N, whereas the friction coefficient (COF) remained a constant of 0.109. Compared to the neat epoxy and random graphene-epoxy composites (RGEC), the COF of AGEC was reduced by 87.5% and 71.2%, and the reduction of wear rate was 86.6% and 85.4% at most, respectively. Scanning electron microscope (SEM) observations illustrated that a compact graphene self-lubricant film was formed on the worn surface of AGEC, which enables AGEC to possess excellent tribological performance. Finally, in light of the excellent tribological properties of AGEC, this study highlights a pathway to expand the tribological applications of graphene-epoxy composites.

For effective heat dissipation in portable electronics, there is a great demand for lightweight and flexible films with superior thermal transport properties. Despite extensive efforts, enhancing the intrinsic low thermal conductivity of polymers while simultaneously maintaining their flexibility is difficult to achieve due to the dilemma of quarrying appropriate filler loading. Herein, a cellulose nanofiber-based film with high in-plane thermal conductivity up to 72.53 W m

As the power density of the electronics is on increasing, improving the heat dissipation performance of electronic packaging materials will play a positive role in promoting the performance of modern electronics. In this work, the three-dimensional carbon fiber (CF)-MXenes foam, in which the vertically aligned CF constructed the heat transport paths, were prepared by simple freeze-drying method. As a result, the thermal conductivity (TC) of CF-M/epoxy composites was improved to an ultra-high level (9.68 W/mK) at 30.2 wt% hybrid fillers, increasing by 4509% enhancement compared with that of neat epoxy. In addition, the thermal properties of composites, such as glass transition temperature (Tg), coefficient of thermal expansion (CTE) were investigated. All the results indicated that the CF-MXenes/epoxy composite was supposed to be a promising heat dissipation material and will be used in the field of electronic packaging.

Highly thermal conductive thermal interface materials are playing an irreplaceable role in modern highly integrated microelectronic devices. A facile method was used to fabricate a highly thermal conductive composite combined with highly thermal conductivity and excellent flexibility. The carbon fiber/polydimethylsiloxane (CF/PDMS) composites were prepared by solution blending with PDMS as matrix and different contents CF as thermal conductive fillers. Thermal conductivity of the PDMS composite is up to 2.73 W/mK with 20 wt% CF filler loading. Otherwise, we have characterized the heat transport performance of composites under various conditions. The results indicate that it has very stable and efficient thermal conductivity, which can meet the heat dissipation requirements under various conditions. Therefore, the CF/PDMS composite is a promising thermal management material that can be used to the heat dissipation of electronic devices in the near future.

Polymerizable deep eutectic monomers (DEMs) were prepared by mixing various molar ratios of acrylamide (AM) and choline chloride (ChCl). 1H NMR and Fourier transform infrared confirmed that there w...

Polymer composites with excellent thermal conductivity and superior mechanical strength are in high demand in the electrical engineering systems. However, achieving superior thermal conductivity and mechanical properties simultaneously at high loading of fillers will still be a challenging issue. In this work, a facile method was proposed to prepare the epoxy composite with carbon fibers (CFs) and alumina (Al2O3). This CF and Al2O3 hybrid structure can effectively reduce the interfacial thermal resistance between the matrix and the CFs. The thermal conductivity of epoxy composite with 6.4 wt % CFs and 74 wt % Al2O3 hybrid filler reaches 3.84 W/(m K), which is increasing by 2096% compared with that of pure epoxy. Meanwhile, the epoxy composite still retains outstanding thermal stability and mechanical performance at high filler loading. A cost-effective avenue to prepare highly thermally conductive and superior mechanical properties of polymer-based composites may enable some prospective application in advanced thermal management.

Land use change greatly affects groundwater hydrochemical cycling and thereby food and ecosystem security in arid regions. Spatiotemporal distribution of groundwater hydrochemistry is vital to understand groundwater water-salt migration processes in the context of land use change, while it is not well known in the oasis-desert region of arid inland basins. Here, to investigate the influences of land use change on groundwater hydrochemistry and suggest sustainable management, 67 water samples were obtained in the Luntai Oasis, a typical oasis desert of Central Asia. Stable isotopes and chemical components of samples were analyzed. Piper and Gibbs plots were used to elaborate the chemical type and major mechanisms controlling water chemistry, respectively. The results showed that cultivated land area has markedly expanded in the Luntai Oasis over the last 20 years (increasing by 121.8%). Groundwater seasonal dynamics and groundwater–surface water interaction were altered dramatically by farmland expansion and groundwater exploitation. Specifically, the spatial heterogeneity and seasonal variability of groundwater hydrochemistry were significant. Compared with the desert area, the δ18O and TDS of river water and shallow groundwater in the oasis cropland exhibited lower values but greater seasonal variation. Higher TDS was observed in autumn for river water, and in spring for shallow groundwater. The chemical evolution of phreatic water was mainly controlled by the evaporation-crystallization process and rock dominance, with a chemical type of Cl-SO4-Na-Mg. Significant spatiotemporal heterogeneity of groundwater hydrochemistry demonstrated the influence of climatic, hydrogeological, land use, and anthropogenic conditions. Groundwater overexploitation would cause phreatic water leakage into confined water, promoting groundwater quality deterioration due to fresh saltwater mixing. Improving agricultural drainage ditches in conjunction with restricting farmland expansion and groundwater extraction is an effective way to alleviate groundwater environment deterioration and maintain oasis-desert ecosystems in arid regions.

As an essential part of terrestrial ecosystems, convenient and accurate reconstruction of the past carbon sequestration capacity of forests is critical to assess future trends of aboveground carbon storage and ecosystem carbon cycles. In addition, the relationship between climate change and carbon sequestration of forests has been vigorously debated. In this study, dynamic change of carbon sequestration capacity in aboveground biomass of Picea schrenkiana (hereinafter abbreviated as P. schrenkiana) in the Tianshan Mountains, northwestern China, from 1850–2017, were reconstructed using dendrochronology. The main climate drivers that affected carbon sequestration capacity in aboveground biomass of P. schrenkiana were then investigated. The results showed that: (1) tree-ring width and diameter at breast height (DBH) of P. schrenkiana obtained from different altitudes and ages were an effective and convenient estimation index for reconstructing the carbon sequestration capacity of P. schrenkiana. The carbon storage of P. schrenkiana forest in 2016 in the Tianshan Mountains was 50.08 Tg C calculated using tree-ring width and DBH, which was very close to the value determined by direct field investigation data. (2) The annual carbon sequestration potential capacity of P. schrenkiana exhibited an increasing trend from 1850–2017. Temperature, especially minimum temperature, constituted the key climatic driver resulting in increased carbon sequestration capacity. The contribution rates of temperature and minimum temperature to the change of P. schrenkiana carbon sequestration capacity was 75% and 44%, respectively. (3) The significant increase of winter temperature and minimum temperature led to warming in the Tianshan Mountains, resulting in a significant increase in carbon sequestration capacity of P. schrenkiana. The results indicate that, with the continuous increase of winter temperature and minimum temperature, carbon sequestration of P. schrenkiana in the Tianshan Mountains is predicted to increase markedly in the future. The findings of this study provide a useful basis to evaluate future aboveground carbon storage and carbon cycles in mountain systems possessed similar characteristics of the Tianshan Mountains.

Silanized graphene oxide (SiGO) was synthesized and characterized using KH570 as a modifier on graphene oxide (GO). Subsequently, high performance silanized graphene oxide/cardanol based be...

Along with the need of the fast development of electric and electronic industries, polymer composites with high thermal conductivity are much more demanded in the field of energy storage systems and electrical devices. In this paper, graphene ball (GB) composed of stacked graphene sheets was selected as filler and introduced into ethylene-propylene-diene monomer (EPDM) for improving its thermal conductivity. Here, a facile method was proposed to make GB uniformly dispersed into EPDM by solution blending and then obtain high thermal conductive EPDM/GB composites through vulcanization. The thermal conductivity of neat EPDM is 0.29 W/(m·K). The addition of the GB leads to the increase of the thermal conductivity of the composites. Thermal conductivity of the EPDM/GB composite with 60 phr GB loading along the in- and through-plane directions are 18.43 and 1.48 W/(m·K), which are approximately to 62 and 4 times higher than that of neat EPDM, respectively. The EPDM/GB composites are expected to play a key role in new-era advanced electronic devices and related applications due to its excellent thermal transport property.

Efficient heat dissipation is a prerequisite for further improving the integration of devices. However, the polymer composites are not satisfying heat dissipation. For that reason, high-thermal-tra...

With the development of wireless communication systems, it is particularly essential to maximize the quality of experience (QoE) of machine-to-machine (M2M) communication. In this paper, we propose a new QoE-oriented uplink rate control and resource allocation scheme for the Internet of Things (IoT) network, by introducing an evaluation model based on mean opinion score (MOS) for different machine-type communication (MTC) devices. The existing works are only dedicated to solving the short-term resource allocation problems by considering the current transmission time slots, which cannot handle long-standing problems. To this end, based on the recently developed Lyapunov optimization, we convert the original long-term optimization problem into the admission rate control subproblem and the resource allocation subproblem in each time slot. To solve the joint power optimization and sub-channel selection subproblems, Gale-Shapley algorithm is utilized to formulate it as a two-dimensional matching problem, and the preference lists are established by the transmission rate and signal to interference plus noise ratio (SINR). In the proposed algorithms, a priority mechanism is employed to ensure fairness. The simulation results demonstrate that without prior knowledge of the data arrivals and sub-channel statistics, the proposed algorithms can significantly improve the overall perceived quality from the users' perspective.

During mechanical processes, violent friction and wear between the friction contact surfaces not only causes wear to mechanical components, reducing the instrument life, but also causes friction heat, reducing the working efficiency of machines during operation. The addition of graphene-reinforced grease to the mechanical friction surface can effectively reduce the friction coefficient and improve the thermal conductivity. In this work, the tribological properties and thermal conductivity of base grease with graphene were investigated systematically. The tribological results showed that the grease with 2 wt% graphene had the best tribological properties among all these greases. The wear scar diameter and average friction coefficient of graphene grease with 2 wt% graphene reached 0.43 mm and 0.10 (the values for base grease are 0.50 mm and 0.118), respectively. In addition, the average friction coefficient and wear scar diameter increased proportionally with the increasing load and frequency. The thermal conductivity of the grease with 4 wt% graphene reached 0.28 W (m K)−1, an increase of 55.5% in comparison with the base grease. It is proposed that the addition of graphene into the base grease effectively enhanced the tribological properties and thermal conductivity.

High thermal conductivity polymer composites at low filler loading are of considerable interest because of their wide range of applications. The construction of three-dimensional (3D) interconnected networks can offer a high-efficiency increase for the thermal conductivity of polymer composites. In this work, a facile and scalable method to prepare graphene foam (GF) via sacrificial commercial polyurethane (PU) sponge templates was developed. Highly thermally conductive composites were then prepared by impregnating epoxy resin into the GF structure. An ultrahigh thermal conductivity of 8.04 W m-1 K-1 was obtained at a low graphene loading of 6.8 wt%, which corresponds to a thermal conductivity enhancement of about 4473% compared to neat epoxy. This strategy provides a facile, low-cost and scalable method to construct a 3D filler network for high-performance composites with potential to be used in advanced electronic packaging.

A tunable Brillouin-Raman multi-wavelength fiber laser has been proposed and demonstrated in a linear cavity configuration, where stimulated Raman scattering and stimulated Brillouin scattering occur simultaneously in the dispersion compensation fiber. The influence of Brillouin pump (BP) and Raman pump (RP) power on the obtained Brillouin Stokes lines has been investigated in detail. The experimental results show that when BP wavelength is 1545 nm, 63 orders of Stokes lines can be obtained at most, and the interval between adjacent lines is about 0.08 nm. Moreover, there are two opposite relations between the number of the generated Stokes lines and the BP power within the whole tunable range of 1520–1575 nm (55 nm), depending on the Raman gain. The proposed laser featuring simple structure will enable promising potentials in optical communications and optical sensor systems.

Under drought stress, desert riparian forest plants are highly self-regulating and have their own unique water use and regulation strategies, which can respond positively in several aspects such as physiology, ecology, and individual phenotypes when coping and adapting to the stresses brought by external environmental changes. In addition, as an important component of arid zone ecosystems, desert riparian forest plants maintain the cycling process of energy and material in desert areas. Therefore, it is of great ecological value to study the role played by desert riparian forest plants in desertification control and biodiversity conservation in arid zones. The purpose of this study is to provide basic data and scientific basis for the conservation, and restoration of desert riparian forests in the inland river basin of arid zone. In this paper, the physiological and ecological responses of desert riparian plants under drought stress were analyzed by reviewing the literature and focusing on the key scientific issues such as drought avoidance mechanisms, water use, and water redistribution, and the relationship between interspecific water competition and resource sharing of desert riparian plants. The results showed that: (1) In the inland river basin of arid zone, desert riparian plants show a mutual coordination of increasing soluble sugars, proline, malondialdehyde (MDA), and decreasing peroxidase (POD), to form a unique drought avoidance mechanism, and improve their drought tolerance by changing leaf stomatal conductance resulted from regulating abscisic acid (ABA) and cytokinin (CTK) content. (2) Desert riparian forest plants have their own unique water use and regulation strategies. When the degree of drought stress increased, Populus euphratica enhanced the water flow of dominant branches by actively sacrificing the inferior branches to ensure and improve the overall survival chances of the plant, while Tamarix ramosissima weaken hydraulic conductance, and increase subsurface material inputs by reducing plant height to cope with drought stress. (3) The root systems of desert riparian plants have hydraulic uplift and water redistribution functions, and, in the hydraulic uplift process of P. euphratica and T. ramosissima root systems, there is a possibility of assisting with other species in water utilization and the existence of a resource sharing mechanism.

Apelin has been shown to be a novel angiogenic factor in various cancers. However, there is limited information regarding the role of apelin in breast cancer. The aim of the present study is to examine associations between apelin, clinicopathological variables, and clinical outcome in breast cancer patients.In this study, we began by investigating the apelin expression in breast cancer with long-term follow-up using immunohistochemistry. We then analyzed the relationship between apelin expression and microvessel density (MVD), lymphatic vessel density (LVD), lymph node status as well as other established clinicopathological parameters. The relationship between apelin expression and prognosis was also studied. In addition, we compared the apelin and its ligant APJ expression between 30 breast cancer samples and normal breast tissues adjacent to the breast tumors using western blot (WB) and RT-PCR.Apelin protein expression was detected in the cytoplasm of the breast carcinoma cells at various intensities. Apelin expression was positive in 59.2% (84/142) of the breast cancer patients and apelin expression was significantly correlated with tumor size (p = 0.030), stage (p = 0.000), histological type (p = 0.009), MVD (p = 0.000), LVD (p = 0.000), and lymph node metastasis (p = 0.041). Survival curves determined by the Kaplan-Meier method and univariate analysis demonstrated that high expression of apelin was associated with both worse disease-free survival (p 0.001) and overall survival (p 0.001). Interestingly, a significant difference in apelin and APJ expression by WB as well as RT-PCR was observed between normal breast tissues adjacent to the breast tumors and breast cancer tissues.Our results showed apelin expression was associated with tumor size, stage, histological type, MVD, LVD, lymph node metastasis and poor prognosis. The presence of apelin may be a new prognostic factor and potential therapeutic target for breast cancer.

Owing to its excellent thermal and mechanical properties of graphene, graphene-based composites have attracted tremendous research interest in recent years. In particular, graphene with high thermal conductivity becomes an important and promising filler in composites for thermal management. This critical review focus on the recent advances in graphene-based composites with high thermal conductivity. After the introduction of thermal conductive mechanisms of graphene-based composites, the fabrication methods of graphene-based composites are summarized. Then we also discuss currently researches of various graphene-based composites such as graphene/thermoplastic composites and graphene/thermoset composites. Herein, the mechanisms, preparation, and properties of graphene-based composites are discussed along with detailed examples from the scientific literature and the guidance are provided on the fabrication of composites with high thermal conductivity.

Due to the growing needs of thermal management in modern electronics, high thermal conductive polymer composites are increasingly demanded. Boron nitride nanosheet (BNNS) was prepared through molten hydroxide assisted liquid exfoliation of hexagonal boron nitride (h-BN) powder and used as thermally conductive filler. The poly(vinylidene fluoride) (PVDF)/BNNS films were obtained through solution blend and hot pressing. With only 4 wt% BNNS, the in-plane thermal conductivity of PVDF/BNNS composite achieved 4.69 W/mK, with a thermal conductivity enhancement of 2297% compared to neat PVDF. However, the through-plane thermal conductivity of the composites is only 0.23 W/mK, which shows a high thermal conductive anisotropy over 20. The thermal conductive anisotropy and the high in-plane thermal conductivity can be attributed to the formation of thermally conductive network in PVDF matrix. Thus, the BNNS reinforced PVDF films are promising for use as an efficient heat spreader for electronic cooling applications.

Agricultural water use accounts for more than 95% of the total water consumption in the extreme arid region of the Tarim River Basin. Understanding the variation of agricultural water demand (AWD) and its attributions is therefore vital for irrigation management and water resource allocation affecting the economy and natural ecosystems in this high water-deficit region. Here spatial–temporal variations of AWD based on weighted crop water requirement (ETc) were estimated using the Penman–Monteith equation and the crop coefficient approach. Then the contributions of meteorological factors and planting structure (i.e. proportions of crop acreages) to AWD variations were quantified based on traditional methods and numerical experiment (i.e. a series calculation of AWD based on different input data). Results indicated that AWD decreased during 1960–1988 at a rate of 2.76 mm/year and then started to increase at a high rate of 9.47 mm/year during 1989–2015. For the first period (1960–1988), wind speed (uz), maximum humidity (RHmax) and sunshine duration (n) were the most important factors leading to decreased AWD, while for the second period the evolution of planting structure was the most significant factor resulting in the rapid increase of AWD, followed by the minimum temperature (Tmin), uz and RHmax. The evolution of planting structure alone would lead to an increase rate for AWD of 7.1 mm/year while the climatic factor would result in an increase rate of 1.9 mm/year during 1989–2015.

Epoxy composites with ZnO powders characterized by different structures as inclusion are prepared and their thermal properties are studied. The experimental results demonstrate that the epoxy resins filled by tetrapod-shaped ZnO (T-ZnO) whiskers have the superior thermal transport property in comparison to ZnO micron particles (ZnO MPs). The thermal conductivity of ZnO/epoxy and T-ZnO/epoxy composites in different mass fraction (10, 20, 30, 40, 50 wt%) are respectively investigated and the suitable models are compared to explain the enhancement effect of thermal conductivity. The thermal conductivity of T-ZnO/epoxy composites with 50 wt% filler reaches 4.38 W m−1 K−1, approximately 1816% enhancement as compared to neat epoxy. In contrast, the same mass fraction of ZnO MPs are incorporated into epoxy matrix showed less improvement on thermal conduction properties. This is because T-ZnO whiskers act as a thermal conductance bridge in the epoxy matrix. In addition, the other thermal properties of T-ZnO/epoxy composites are also improved. Furthermore, the T-ZnO/epoxy composite also presents a much reduced coefficient of thermal expansion (∼28.1 ppm K−1) and increased glass transition temperature (215.7 °C). This strategy meets the requirement for the rapid development of advanced electronic packaging.

Thermal management materials with high thermal conductivity and good flexibility are needed for the next generation of flexible electronics. Herein, a flexible graphene/cellulose nanofiber (CNFG) composite film with high thermal conductivity was fabricated via simple vacuum-assisted filtration. The highly ordered hierarchical stacked layer structure of the graphene nanosheets endows the CNFG composite films with excellent heat-spreader performance and good flexibility. The in-plane thermal conductivity of the CNFG composite film loaded with 50 wt% graphene reached 164.7 W m−1 K−1, and the through-plane thermal conductivity reached 5.0 W m−1 K−1. More importantly, the thermal conductivities of the CNFG composite films in both the axial and radial directions barely changed after 1000 bending cycles. In addition to the good flexibility, the CNFG composite films exhibited superior mechanical properties compared to common graphene papers and neat cellulose nanofibers. The tensile strength of the CNFG composite film containing 50 wt% graphene was 72.3 ± 5.4 MPa. All these qualities make the CNFG composite films ideal heat spreaders for flexible electronic devices.