Search

Disodium phosphate dodecahydrate was hybrid with n-octadecane as the phase change material (PCM) by reversed-phase emulsification. The cellulose sponge obtained based on cellulose nanocrystals was used as the support material to fabricate a shape-stable composite phase change material (CPCM) through impregnation. It was laminated with cotton fabric to obtain a sandwich structure thermal insulation fabric. An infrared spectrometer, scanning electron microscope, differential thermal scanning calorimeter, and other equipment were used to characterize the morphology, chemical groups, and latent heat properties of CPCMs and thermal insulation fabrics. The results displayed that the cellulose sponge had a porosity of 99.03%, a density of 0.012 g/cm3, and could withstand 1900 times its weight. When the mass proportion of PCM in the composite system was 67.5%, its latent heat energy was 84.44 J/g, which also revealed optimal shape stability. Compared to the original fabric, the thermal insulation efficiency of the sandwich structured fabric was increased by 17.7%∼18.2%, and the photothermal conversion rate reached 25.88%, with good application performance. [ABSTRACT FROM AUTHOR]

Oxygen plasma etching followed with spraying of hydrophobic suspension containing SiO2 nanoparticles were used to construct superhydrophobic cotton fabric, and the adhesion behavior of the superhydrophobic surface to deionized water, dye liquor, sterile defibrinated sheep blood, and simulated blood solutions was studied and evaluated in focus. Results of the present study showed the water contact and water slip angles of the superhydrophobic cotton fabric were 158.6° and 7.3° with 5 wt% of hexadecyltrimethoxysilane (HDTMS). The plasma etching imparted uniform strip grooves on the fiber, which together with the deposition of SiO2 nanoparticles constituted a dual-scale rough structure on the fabric surface. FTIR analysis showed the successful combination of HDTMS and SiO2 nanoparticles and covering on the cotton surface. This superhydrophobic surface possessed hydrophobic effect even after 35 times of abrasion and immersion in strong acid or alkali solutions for 8 h. The surface tension and viscosity of simulated blood and sterile defibrinated sheep blood (SDSB) were similar, with a contact angle of only 139.7° and a slip angle above 20°. And their adhesion forces were calculated by the Cassie-Baxter equation to be 30.93 and 37.88 μN. Moreover, the droplets placement of simulated blood and SDSB on the superhydrophobic surface for 2 h caused trace adhesion but no penetration. This indicated that the superhydrophobic surface had anti-adhesion performance to the liquids. In conclusion, it was evident that the superhydrophobic fabric has good application prospects in the field of textiles for daily life and medical protection. [ABSTRACT FROM AUTHOR]