Search

Abstract Developing progressive photoelectrochemical (PEC) techniques holds great potential for advancing analytical sensitivity in clinical. However, the low transport and separation of charge carrier efficiency and deficient active sites block efficient and durable PEC analytical performance features. And herein a piezo‐assisted PEC sensing platform for glutathione (GSH) detection are successfully prepared based on S vacancies rich CdS (Sv‐CdS) nanowires. The collaboration of piezoelectric polarization and S vacancies engineering contributed to the boosted PEC performance by accelerating the spatial separation of photogenerated charges and providing abundant active sites. Moreover, the charge transfer efficiency further promoted with the introduction of GSH acted a hole scavenge that effectively suppresses the electron‐hole recombination, giving rise to an amplified photocurrent. As a demonstration, the proposed method presents an outstanding analytical performance toward GSH. Consequently, this work provides an inspirable and convenient route for designing high‐efficiency photoelectrode in PEC sensing in virtue of judicious structural, and defect engineering, and the exploring of an external‐field‐coupling‐enhanced PEC platform.

This paper is the first attempt to fabricate eutectic high entropy alloy (EHEA) using dual-wire arc additive manufacturing (D-WAAM) technology with twisted wire + single wire. Using CoFeNi twisted wire and Al single wire as raw materials, the eutectic point was determined by adjusting the Al content over a wide range by adjusting the speed of the Al single wire. We designed and fabricated Al19Co25Fe25Ni31 hypo-eutectic, Al20Co22Fe30Ni28 eutectic, and Al21Co22Fe29Ni28 hyper-eutectic high entropy alloys, and conducted in-depth research on their mechanical properties and microstructure. With increasing Al content, the microstructural changes from hypo-eutectic to hyper-eutectic, the strength of the alloy increases, and the plasticity of the alloy decreases. The fabricated Al20Co22Fe30Ni28 EHEA shows the best strength-plastic balance. This characteristic is mainly attributed to the eutectic alloy exhibiting a dual-phase lamellar microstructure consisting of an ordered face-centered cubic (FCC) L12 phase with a volume fraction of 56.9% and an ordered body-centered cubic (BCC) B2 phase with a volume fraction of 43.1%. Because the alloy contains both the hard B2 phase and the tough L12 phase, the room temperature tensile strength reaches 1041 MPa, and the plasticity reaches 14.9%, which is higher than those of other EHEAs fabricated by casting and arc melting. The excellent strength and plasticity of these materials show great potential in engineering applications. This approach not only expands the existing additive manufacturing technology but also provides new ideas for the additive manufacturing of EHEAs.

Introduction Acute-on-chronic liver failure (ACLF) is a prevalent and life-threatening liver disease with high short-term mortality. Although recent clinical trials on the use of mesenchymal stem cells (MSCs) for ACLF treatment have shown promising results, multicentre randomised controlled phase II clinical trials remain uncommon. The primary aim of this trial is to assess the safety and efficacy of different MSCs treatment courses for ACLF.Methods and analysis This is a multicentre, double-blind, two-stage, randomised and placebo-controlled clinical trial. In the first stage, 150 patients with ACLF will be enrolled and randomly assigned to either a control group (50 cases) or an MSCs treatment group (100 cases). They will receive either a placebo or umbilical cord-derived MSCs (UC-MSCs) treatment three times (at weeks 0, 1 and 2). In the second stage, 28 days after the first UC-MSCs infusion, surviving patients in the MSCs treatment group will be further randomly divided into MSCs-short and MSCs-prolonged groups at a 1:1 ratio. They will receive two additional rounds of placebo or UC-MSCs treatment at weeks 4 and 5. The primary endpoints are the transplant-free survival rate and the incidence of treatment-related adverse events. Secondary endpoints include international normalised ratio, total bilirubin, serum albumin, blood urea nitrogen, model for end-stage liver disease score and Child-Turcotte-Pugh score.Ethics and dissemination Ethical approval of this study has been obtained from the Fifth Medical Center of the Chinese PLA General Hospital (KY-2023-3-19-1). All results of the study will be submitted to international journals and international conferences for publication on completion of the study.Trial registration number NCT05985863.

Passenger density is a major factor influencing indoor climate conditions and the corresponding energy consumption in the transfer halls of metro transportation hubs. In this study, passenger flow in a subway transfer hall in Beijing was measured across three typical seasons. A differential equation model was established to account for the characteristics of passenger density. Based on this, a passenger density prediction model was developed and utilized for analysis. The results show that passenger density is primarily affected by operation time and the surrounding population composition, with a relatively weak correlation to outdoor weather conditions. Additionally, passenger density differs significantly between weekdays and weekends, with the weekday peak being 2.5 times higher than that on weekends. During the four peak hours on weekdays, both in the morning and evening, passenger density exceeds the design capacity, resulting in insufficient fresh air supply. However, for most of the weekday hours and for all hours on weekends, passenger density remains below the design capacity. This indicates a substantial potential for energy savings by adjusting the fresh air supply according to actual passenger density.

Abstract Background Hemorrhage is a potential and serious adverse drug reaction, especially for geriatric patients with long-term administration of rivaroxaban. It is essential to establish an effective model for predicting bleeding events, which could improve the safety of rivaroxaban use in clinical practice. Methods The hemorrhage information of 798 geriatric patients (over the age of 70 years) who needed long-term administration of rivaroxaban for anticoagulation therapy was constantly tracked and recorded through a well-established clinical follow-up system. Relying on the 27 collected clinical indicators of these patients, conventional logistic regression analysis, random forest and XGBoost-based machine learning approaches were applied to analyze the hemorrhagic risk factors and establish the corresponding prediction models. Furthermore, the performance of the models was tested and compared by the area under curve (AUC) of the receiver operating characteristic (ROC) curve. Results A total of 112 patients (14.0%) had bleeding adverse events after treatment with rivaroxaban for more than 3 months. Among them, 96 patients had gastrointestinal and intracranial hemorrhage during treatment, which accounted for 83.18% of the total hemorrhagic events. The logistic regression, random forest and XGBoost models were established with AUCs of 0.679, 0.672 and 0.776, respectively. The XGBoost model showed the best predictive performance in terms of discrimination, accuracy and calibration among all the models. Conclusion An XGBoost-based model with good discrimination and accuracy was built to predict the hemorrhage risk of rivaroxaban, which will facilitate individualized treatment for geriatric patients.

In order to explore the most suitable temperature for the preservation of Hu ram semen at room temperature, the semen samples were placed at 15°C, 20°C, and 25°C respectively. Th e energy metabolism of enzyme activity and triphosphate adenosine (ATP) was detected in the process of preservation. Diff erent parameters such as functional integrity, survival time, reactive oxygen species (ROS) content, superoxide dismutase (SOD) activity, and energy metabolism of adenosine triphosphate (ATP) were detected. Th e results showed that within 2 days of storage, the sperm progressive motility stored at 25°C was the highest. Within 3~5 days of storage, sperm stored at 20°C have the highest progressive motility. Within 6~9 days of storage, the sperm progressive motility stored at 15°C was signifi cantly higher than that of the other groups (P

The empty-space-induced depletion region in photoelectrodes severely exacerbates the recombination of electron–hole pairs, thereby reducing the photoelectrochemical (PEC) analytical performance. Herein, the chemical bond that can suppress the potential barrier and overcome the high energy barrier of out-of-plane Ohmic or Schottky contact is introduced into the PEC sensor to eliminate the depletion region and dramatically promote the separation of electron–hole pairs. Specifically, three-dimensional (3D) hierarchically wheatear-like TiO2 (HWT) nanostructures featuring a large surface area to absorb incident light are crafted as the substrate. The facile carbonized strategy is further employed to engineer the Ti-C chemical bond, serving as the touchstone. The average PL lifetime of HWT-C (4.14 ns) is much shorter than that of the 3D HWT (8.57 ns) due to the promoting effect of the chemically bonded structure on carrier separation. Consequently, the 3D HWT-C covalent photoelectrode (600 μA/cm2) exhibits a 3.6-fold increase in photocurrent density compared with the 3D HWT (167 μA/cm2). Ultimately, the model analyte of the tumor marker is detected, and the linear range is 0.02 ng/mL–100 ng/mL with a detection limitation of 0.007 ng/mL. This work provides a basic understanding of chemical bonds in tuning charge separation and insights on strategies for designing high-performance PEC sensors.

This study aimed to investigate the effects of various diluents on the quality of Hu ram sperm stored at 4 °C. Semen samples were collected from three Hu rams and diluted with diluents A (Sodium citrate–Glucose–Egg yolk), B (Sodium citrate–Glucose), C (Fructose–Skimmed milk powder–Soy lecithin), and D (Tris–Fructose–Citric acid–Egg yolk). Total motility (TM), straight-line velocity (VSL), average path velocity (VAP), curvilinear velocity (VCL), average motion degree (MAD), acrosome integrity, membrane integrity, and reactive oxygen species (ROS) were evaluated. The results showed that diluent D had better preservation in terms of the sperm TM, VSL, VCL, VAP, MAD, and membrane and acrosome integrity. On the third day of the storage, the sperm PM of diluent D was higher than that of other diluents (p < 0.05). The ROS level of diluent D was lower than that of other diluents on the fifth day (p < 0.05). On the seventh day of the storage, the sperm TM in diluent D reached 50%, which was the highest in all diluent groups. On the seventh day of the storage, the integrity of the sperm membrane and the integrity of the acrosome of the sperm in diluent D were the highest in all diluent groups (p < 0.05). In conclusion, these results indicated that diluent D improved the semen quality during storage at 4 °C. In this study, diluent D was the best diluent formula for Hu ram semen stored at 4 °C.

Background. There are very few professional recommendations or guidelines on the needle thoracentesis decompression (NTD) for the tension pneumothorax in the elderly. This study aimed to investigate the safety and risk factors of tension pneumothorax NTD in patients over 75 years old based on CT evaluation of the chest wall thickness (CWT). Methods. The retrospective study was conducted among 136 in-patients over 75 years old. The CWT and closest depth to vital structure of the second intercostal space at the midclavicular line (second ICS-MCL) and the fifth intercostal space at the midaxillary line (fifth ICS-MAL) were compared as well as the expected failure rates and the incidence of severe complications of different needles. We also analyzed the influence of age, sex, presence or absence of chronic obstructive pulmonary disease (COPD), and body mass index (BMI) on CWT. Results. The CWT of the second ICS-MCL was smaller than the fifth ICS-MAL both on the left and the right side (P

Spiking Neural Networks (SNNs) are often considered the third generation of Artificial Neural Networks (ANNs), owing to their high information processing capability and the accurate simulation of biological neural network behaviors. Though the research for SNNs has been quite active in recent years, there are still some challenges to applying SNNs to various potential applications, especially for robot control. In this study, a biologically inspired autonomous learning algorithm based on reward modulated spike-timing-dependent plasticity is proposed, where a novel rewarding generation mechanism is used to generate the reward signals for both learning and decision-making processes. The proposed learning algorithm is evaluated by a mobile robot obstacle avoidance task and experimental results show that the mobile robot with the proposed algorithm exhibits a good learning ability. The robot can successfully avoid obstacles in the environment after some learning trials. This provides an alternative method to design and apply the bio-inspired robot with autonomous learning capability in the typical robotic task scenario.

The purpose of this experiment was to determine the eff ects of diff erent extenders on the sperm quality parameters of Hu ram semen preserved at 16ºC. The quality parameters studied include total sperm motility, progressive motility, survival time, plasma membrane integrity, acrosome integrity and some kinematic parameters, such as the curvilinear velocity. Each ram ejaculated approximately twenty times and ejaculates were collected every two days interval during breeding season. Three Hu rams were used in experiments. The ejaculates were pooled and diluted (1:10) with extenders A (Tris-Fructose based), B (Fructose-Sodium Citrate based), C (Glucose based), D (Fructose based) and E (Control, Physiological saline solution) and then stored at 16ºC. The above parameters were detected every 24 h. The total sperm motility, progressive motility, acrosome integrity and some kinematic parameters of extender A were the highest compared to those of other extenders and decreased slowly within 24 to 144 h. The eff ective survival time of sperm preserved in extender A was 74.50±4.82 h, and the total survival time was 412.67±2.52 h, which was significantly higher than those of the other four extenders (P≤0.05). The acrosome integrity of extender A was the highest within 24 to 144 h and significantly higher than those of the other extenders within 48 to 144 h (P≤0.05). Compared with the other extenders, extender A had numerically the highest plasma membrane integrity within 24 to 96 h of preservation (P>0.05). In conclusion, extender A improved the sperm quality of Hu ram semen, which could be used for artificial insemination for up to 144 h of preservation.

Superior-quality brush hair, also called Type III hair, can be obtained only from the cervical spine region of skin tissues of Yangtze River Delta white goats. The formation of superior-quality brush hair is controlled by a series of critical genes and related signaling pathways. Circular RNAs (circRNAs) are ubiquitous endogenous noncoding RNAs that regulate many biological and physiological processes in mammals. However, little is known about the potential regulatory role of circRNAs in superior-quality brush hair formation. Here, we analyzed circRNA sequencing data from cervical spine region skin tissues of normal-quality brush hair goats and superior-quality brush hair goats and then selected and identified the differentially expressed circRNA circCOL1A1. To investigate the regulatory role and mechanism of action of circCOL1A1, goat hair follicle stem cells (gHFSCs) were cultured and treated with a circCOL1A1 overexpression plasmid and small-interfering RNAs (siRNAs). Functional assays showed that circCOL1A1 knockdown promoted the proliferation and differentiation of gHFSCs cultured in vitro but inhibited stem cell apoptosis, whereas overexpression of circCOL1A1 suppressed stem cell proliferation and differentiation and induced apoptosis. Bioinformatics analysis combined with dual-luciferase reporter assays and RNA binding protein immunoprecipitation (RIP) verified that, mechanistically, circCOL1A1 could bind miR-149-5p directly and then relieve its inhibitory effect on CMTM3 to further control the CMTM3/AR axis. Collectively, our results reveal a novel regulatory pathway for the formation of superior-quality brush hair and indicate that circCOL1A1 plays a role in gHFSC growth and superior-quality brush hair formation by targeting the miR-149-5p/CMTM3/AR axis.

An integrated dual-signal bioassay was devised to fulfil thrombin (TB) ultrasensitive detection by integrating visualization with the photoelectrochemical technique based on G-quadruplex/hemin. During the process, branched sheet embedded copper-based oxides prepared with illumination and alkaline condition play a vital role in obtaining the desirable photocurrent. The switchover of photoelectrochemical signal was realized by the adjustable distance between electron acceptor G-quadruplex/hemin and interface materials due to dissociation of the Cu/Mn double-doped cerium dioxide (CuMn@CeO2)/DNA caused by the addition of TB. Then, CuMn@CeO2 transferred onto visual zones triggered catalytic reactions under the existence of 3,3′,5,5′-tetramethylbenzidine and hydrogen peroxide, making a variation in color recognized by the naked eye and providing visual prediction. Under optimized conditions, this bioassay protocol demonstrated wide linear ranges (0.0001–50 nM), high selectivity, stability, and reproducibility. More importantly, the proposed visual/photoelectrochemical transduction mechanism platform exhibits a lower background signal and more reliable detection results, which also offers an effective way for detecting other proteins and nucleic acids.

Herein, a paper-based glucose/air biofuel cell (BFC) was constructed and implemented for self-powered pesticide detection. Our developed paper-based chip relies on a hollow-channel to transport fluids rather than capillarity, which reduces analysis times as well as physical absorption. The gold nanoparticles (Au NPs) and carbon nanotubes (CNTs) were adapted to modify the paper fibers to fabricate the flexible conductive paper anode/cathode electrode (Au–PAE/CNT–PCE). Molecularly imprinted polymers (MIPs) using 2,4-dichlorophenoxyacetic acid (2,4-D) as a template were synthesized on Au–PAE for signal control. In the cathode, bilirubin oxidase (BOD) was used for the oxygen reduction reaction. Based on a competitive reaction between 2,4-D and glucose-oxidase-labeled 2,4-D (GOx-2,4-D), the amount of GOx immobilized on the bioanode can be simply tailored, thus a signal-off self-powered sensing platform was achieved for 2,4-D determination. Meanwhile, the coupling of the paper supercapacitor (PS) with the paper-based chip provides a simple route for signal amplification. Combined with a portable digital multi-meter detector, the amplified signal can be sensitively readout. Through rational design of the paper analytical device, the combination of BFC and PS provides a new prototype for constructing a low-cost, simple, portable, and sensitive self-powered biosensor lab-on-paper, which could be easily expanded in the field of clinical analysis and drug delivery.

One of the top issues in logistics management and related research is to establish an effective distribution system that is adaptive to new retail and capable of lowering the cost of logistics while enhancing consumer satisfaction. Aimed at reversing the weak points of current logistics distribution patterns, a dual-objective bipolar model with optimal logistics cost and consumer satisfaction by restraining distribution time and load is tested in this paper to figure out the proper nodes and vehicle routes. Data from general and front warehouses of PuPu mall, a Fuzhou-based online retail enterprise, are made into a case study. Moreover, the immune algorithm and genetic algorithm are adopted to achieve the model solution. It is found that the immune algorithm is more efficient than the genetic algorithm in searching solutions, thus having better adaptivity and effectiveness, and also that the type of distribution vehicle plays a significant role in determining the total distribution cost.

The Yangtze River Delta white goat is a unique goat species that can produce superior quality brush hair. CKLF-like MARVEL transmembrane domain-containing 3 (CMTM3), which influences the transcriptional activity of androgen receptor (AR), was identified as a candidate gene related to superior-quality brush hair formation. CMTM3 is generally expressed at low levels, but miR-149-5p is highly expressed in the skin tissues of these goats. The mechanism by which CMTM3 regulates the proliferation and apoptosis of goat hair follicle stem cells has not been elucidated. Here, RT-qPCR, western blotting, 5-ethynyl-2′-deoxyuridine (EdU), cell cycle, apoptosis, and dual-luciferase assays were used to investigate the role and regulatory mechanism of CMTM3 and miR-149-5p. Functional studies showed that CMTM3 overexpression inhibited proliferation and induced apoptosis in cultured hair follicle stem cells, whereas silencing CMTM3 markedly facilitated cell proliferation and deterred apoptosis in cultured hair follicle stem cells. Then, using bioinformatic predictions and the aforementioned assays, including dual-luciferase assays, RT-qPCR, and western blotting, we confirmed that miR-149-5p targets CMTM3 and preliminarily investigated the interaction between CMTM3 and AR in goat hair follicle stem cells. Furthermore, miR-149-5p overexpression significantly accelerated the proliferation and attenuated the apoptosis of hair follicle stem cells. Conversely, miR-149-5p inhibition suppressed the proliferation and induced the apoptosis of hair follicle stem cells. These results reveal a miR-149-5p-related regulatory framework for the miR-149-5p/CMTM3/AR axis during superior quality brush hair formation, in which CMTM3 plays a negative role.

Host cell invasion by Toxoplasma gondii is crucial for the survival and proliferation of parasite. The process of T. gondii tachyzoite invasion requires interaction between parasite proteins and receptors on the surface of host cells. Sialic acid is one of the important receptors for host cell invasion by T. gondii. However, the parasite-derived proteins interacting with sialic acid have not been well characterized. In this study, a novel protein named putative TCP-1 chaperonin (TGME49_318410) in T. gondii (TgTCP-1) was targeted and characterized. TgTCP-1 protein colocalized with MIC3 protein, which could be secreted from T. gondii tachyzoites, and this protein showed a specific binding activity to sialic acid, and DC and Vero cells in vitro. The binding of TgTCP-1 protein to DC and Vero cells were inhibited by either pre-incubation with free sialic acid or neuraminidase treatment of the cells. Moreover, a significant reduction of T. gondii invasion in Vero cells was observed after pre-incubation of the cells with recombinant TgTCP-1 protein. These results illustrated that TgTCP-1 is an important molecule involved in sialic acid-dependent host cell invasion by T. gondii.

The purpose of this study was to investigate whether the addition of chlorogenic acid (CGA) to a sheep semen extender could improve the quality of chilled sheep sperm. Ejaculates (n = 80) were collected from five Hu rams with an artificial vagina. The ejaculates were mixed and divided into five equal parts, diluted with a CGA-free Tris–egg yolk extender (control), or supplemented with 0.2, 0.4, 0.8, and 1.2 mg/mL. The sperm kinematic parameters (viability, progressive motility), functional integrity of plasma membrane and acrosome, adenosine triphosphate (ATP) concentration and antioxidant parameters (Catalase (CAT), Superoxide dismutase (SOD) activity, total antioxidant capacity (T-AOC), ROS level and Malondialdehyde (MDA) content) were evaluated during storage of the semen. The results indicated that: PM, plasmatic membrane integrity and acrosomal integrity in 0.8 mg/mL CGA were higher (p < 0.05) from day 1 to 5. The ROS level in CGA groups was lower than the control (p < 0.05). CAT, SOD, ATP, and T-AOC were highest at 0.8 mg/mL concentration within 1 to 5 days. The above results indicated that the right concentration of CGA improved the quality of Hu ram sperm during chilling storage.

The present study aimed to investigate whether the presence of Tau protected Hu sheep sperm from ROS stress during storage at room temperature. The semen was diluted with extender (Tris-based) at room temperature, supplemented with different concentrations of Tau (0, 10, 20, 40, 80, or 100 mM), and stored at 15 °C. Sperm quality parameters (sperm progressive motility, kinetic parameters, plasma membrane integrity rate, acrosome integrity rate, and MMP) and antioxidant parameters (ROS, MDA, SOD, CAT, and T-AOC) were evaluated during the preservation of semen. The addition of Tau, especially at a concentration of 20 mM, exerted positive effects on sperm quality parameters and antioxidant parameters compared to the sperm without Tau treatment (control group). The addition of Tau, especially at a concentration of 100 mM, exerted negative effects on sperm quality parameters and antioxidant parameters compared to the control group. Interestingly, the results indicated that the sperm acrosome integrity rate did not change during storage time. In conclusion, the addition of Tau to sperm preserved at room temperature can enhance the antioxidant ability of sperm, reduce the LPO on the 5th day, and improve the quality of semen preserved at room temperature. These results implied that Tau had potential to enhance Hu sheep sperm reproductive performance.

Recent research showed that the chaotic maps are considered as alternative methods for generating pseudo-random numbers, and various approaches have been proposed for the corresponding hardware implementations. In this work, an efficient hardware pseudo-random number generator (PRNG) is proposed, where the one-dimensional logistic map is optimised by using the perturbation operation which effectively reduces the degradation of digital chaos. By employing stochastic computing, a hardware PRNG is designed with relatively low hardware utilisation. The proposed hardware PRNG is implemented by using a Field Programmable Gate Array device. Results show that the chaotic map achieves good security performance by using the perturbation operations and the generated pseudo-random numbers pass the TestU01 test and the NIST SP 800-22 test. Most importantly, it also saves 89% of hardware resources compared to conventional approaches.

Large-scale matrix determinants and linear equations are two basic computational tools in science and engineering fields. However, it is difficult for a resource-constrained client to solve large-scale computational tasks. Cloud computing service provides additional computing resources for resource-constrained clients. To solve the problem of large-scale computation, in this article, a secure and efficient framework is proposed to outsource large-scale matrix determinants and linear equations to a cloud. Specifically, the proposed framework contains two protocols, which solve large-scale matrix determinant and linear equations, respectively. In the outsourcing protocols of large-scale matrix determinants and linear equations, the task matrix is encrypted and sent to the cloud by the client. The encrypted task matrix is directly computed by using LU factorization in the cloud. The computed result is returned and verified by the cloud and the client, respectively. The computed result is decrypted if it passes the verification. Otherwise, it is returned to the cloud for recalculation. The framework can protect the input privacy and output privacy of the client. The framework also can guarantee the correctness of the result and reduce the local computational complexity. Furthermore, the experimental results show that the framework can save more than 70% of computing resources after outsourcing computing. Thus, this article provides a secure and efficient alternative for solving large-scale computational tasks. [ABSTRACT FROM AUTHOR]