Search

Considering the rising interest in environmental, social, and governance (ESG) globally, various studies have shown that ESG practice increases firm value; however, there is still much debate. This study focuses on the relationship between ESG practice and firm value. Further, we identify the mechanisms constituting this relationship to address relevant research gaps. Specifically, this study examines the connection between ESG practice and corporate valuation, emphasizing the mediating role of a company’s reputation. Using panel analysis of data from 145 Korean firms (2014-2021), the study reveals that ESG practices notably enhance firm value, signaling their significance to stakeholders. Corporate reputation acts as a bridge between ESG efforts and value, with corporate reputation's influence varying across industries. This research presents broad implications for both academic and industrial fields, highlighting the strategic importance of ESG in enhancing firm value.

Achieving historically anticipated improvement in the performance of integrated circuits is challenging, due to the increasing cost and complexity of the required technologies with each new generation. To overcome this limitation, the exploration and development of novel interconnect materials and processes are highly desirable in the microelectronics field. Molybdenum (Mo) is attracting attention as an advanced interconnect material due to its small resistivity size effect and high cohesive energy; however, effective processing methods for such materials have not been widely investigated. Here, we investigate the electrochemical behavior of ions in the confined nanopores that affect the electrical properties and microstructures of nanoscale Mo and Mo–Co alloys prepared via template-assisted electrodeposition. Additives in an electrolyte allow the deposition of extremely pure metal materials, due to their interaction with metal ions and nanopores. In this study, boric acid and tetrabutylammonium bisulfate (TBA) were added to an acetate bath to inhibit the hydrogen evolution reaction. TBA accelerated the reduction of Mo at the surface by inducing surface conduction on the nanopores. Metallic Mo nanowires with a 130 nm diameter synthesized through high-aspect-ratio nanopore engineering exhibited a resistivity of (63.0 ± 17.9) μΩ·cm. We also evaluated the resistivities of Mo–Co alloy nanowires at various compositions toward replacing irreducible conventional barrier/liner layers. An intermetallic compound formed at a Mo composition of 28.6 at%, the resistivity of the Mo–Co nanowire was (58.0 ± 10.6) μΩ·cm, indicating its superior electrical and adhesive properties in comparison with those of conventional barriers such as TaN and TiN. Furthermore, density functional theory and non-equilibrium Green’s function calculations confirmed that the vertical resistance of the via structure constructed from Mo-based materials was 21% lower than that of a conventional Cu/Ta/TaN structure.

This study developed and optimized a novel and cost-effective method for producing AlN particles by heating Al powder in a nitrogen atmosphere at temperatures lower than the melting point of Al. As the size of the initial Al particles decreased, nitridation was accelerated because of the high specific surface area (more sites to initiate nitridation) and porosity (more pathways for nitrogen gas). The nitridation rate was initially slow for larger Al particles because of the time required to achieve a sufficiently low oxygen content, whereas almost complete nitridation of 1 μm Al powder rapidly occurred. The nitridation degree was 95% nitridation) were obtained from the smaller Al particles. Process optimization demonstrated efficient and industrially relevant strategies for producing AlN from Al particles. The use of a mixture of different Al particle sizes greatly increased the degree of nitridation compared to the use of only 10 μm Al particles because of the high specific surface area and limited coarsening of Al by limiting the molten Al phase. The addition of Ar gas regulates the nitridation rate to avoid exhausting the nitrogen supply, which results in a very high degree of nitridation (98.7%). These findings demonstrate the production of high-purity AlN from Al powder at much lower temperatures than those currently used for commercial AlN fabrication. This could significantly reduce the manufacturing cost and promote wider use of AlN to take advantage of its attractive properties for electronics and other applications.

This study explored 141 Korean immigrant parents’ use of local libraries to enhance their families’ social and cultural capital and adjust to the host country. We searched resources in Korean, and multicultural programs planned for the public and immigrants, Asian immigrants in particular, at three libraries before COVID-19 and at two libraries during COVID-19. Parents reported dissatisfaction with library services because of language barriers (38%) and the lack of Korean resources (38%) and cultural programs (25%). Except for 18 books and 24 e-resources, no library resources in Korean were published after 2008. At Branches B and C, before COVID-19, only one multicultural program was offered for children. During COVID-19, hate crimes against Asians increased by 77%. However, at Branches B and C, the number of adult programs related to Asian culture decreased to 0% from 6% and increased to 3% from 0%, respectively, during COVID-19. The respondents’ concerns about the lack of programs supporting their adjustment and fostering multicultural dialog were validated.

Abstract Beyond the general purpose of noble gas ion sputtering, which is to achieve functional defect engineering of two-dimensional (2D) materials, we herein report another positive effect of low-energy (100 eV) He+ ion irradiation: converting n-type MoS2 to p-type by electron capture through the migration of the topmost S atoms. The electron capture ability via He+ ion irradiation is valid for supported bilayer MoS2; however, it is limited at supported monolayer MoS2 because the charges on the underlying substrates transfer into the monolayer under the current condition for He+ ion irradiation. Our technique provides a stable and universal method for converting n-type 2D transition metal dichalcogenides (TMDs) into p-type semiconductors in a controlled fashion using low-energy He+ ion irradiation.

The current research develops and tests the theory that beliefs in economic mobility are affected by social capital at the community level, especially for low-income individuals. Integrating concepts from social capital and perceived economic mobility (PEM), this research hypothesizes that members of disadvantaged groups (vs. members of advantaged groups) are more likely to adjust their PEM depending on the social capital at the community level. Using archival data, multilevel analysis is employed to examine whether individual- or community-level social capital increases PEM and the extent to which income moderates this relationship. Consistent with our hypotheses, social capital at the community level is significantly associated with PEM and this relationship is stronger for low-income (vs. high-income) earners. Study 1 shows that individuals in communities with high levels of social relations and participation are more likely to have higher PEM than those in communities with lower levels. Study 2 replicates this finding with a similar dependent variable: negative prospects. Further, the PEM-enhancing and negative prospects-decreasing effects of community-level social capital are consistently stronger for low-income (vs. high-income) earners. This study extends the investigation of PEM and social capital by suggesting social capital as a possible antecedent of PEM.

Though it has passed over 30 years, Korea’s community-based health insurance (CBHI) expansion can provide useful policy implications to developing countries with similar conditions, that is, lack of fiscal resources, health infrastructure, and medical resources to expand coverage to the informal sector. We summarized three groups of success factors through in-depth interviews and narrative analysis: system design, system operation, and public perception of the system. Korean CBHI could expand to the informal sector with the same system design as the formal sector such as mandatory enrolment, compulsory designation of medical service providers along with the low-benefit, low-contribution, and a low-payment system. However, expansion to the informal sector was somewhat different, as the CBHI exercised and operated the scheme with flexibility, semi-autonomy and leadership to fit for local context in terms of operation. Moreover, cultural factors that encouraged public awareness and increased participation significantly contributed in appealing to the informal sector. Overall, the systemic, operational, and cultural factors interacted with each other and created a synergy effect that local members in the informal sector found attractive.

With the prevalence of obesity in adolescents, and its long-term influence on their overall health, there is a large body of research exploring better ways to reduce the rate of obesity. A traditional way of maintaining an adequate body mass index (BMI), calculated by measuring the weight and height of an individual, is no longer enough, and we are in need of a better health care tool. Therefore, the current research proposes an easier method that offers instant and real-time feedback to the users from the data collected from the motion sensors of a smartphone. The study utilized the mHealth application to identify participants presenting the walking movements of the high BMI group. Using the feedforward deep learning models and convolutional neural network models, the study was able to distinguish the walking movements between nonobese and obese groups, at a rate of 90.5%. The research highlights the potential use of smartphones and suggests the mHealth application as a way to monitor individual health.

This open-label study assessed the safety and immunogenicity of two doses (14 days apart) of an indigenously manufactured, killed, bivalent (Vibrio cholerae O1 and O139), whole-cell oral cholera vaccine (SHANCHOL; Shantha Biotechnics) in healthy adults (n = 100) and children (n = 100) in a cholera endemic area (Vellore, South India) to fulfill post-licensure regulatory requirements and post-World Health Organization (WHO) prequalification commitments. Safety and reactogenicity were assessed, and seroconversion rates (i.e. proportion of participants with a ≥ 4-fold rise from baseline in serum vibriocidal antibody titers against V. cholerae O1 Inaba, O1 Ogawa and O139, respectively) were determined 14 days after each vaccine dose. No serious adverse events were reported during the study. Commonly reported solicited adverse events were headache and general ill feeling. Seroconversion rates after the first and second dose in adults were 67.7% and 55.2%, respectively, against O1 Inaba; 47.9% and 45.8% against O1 Ogawa; and 19.8% and 20.8% against O139. In children, seroconversion rates after the first and second dose were 80.2% and 68.8%, respectively, against O1 Inaba; 72.9% and 67.7% against O1 Ogawa; and 26.0% and 18.8% against O139. The geometric mean titers against O1 Inaba, O1 Ogawa, and O139 in both adults and children were significantly higher after each vaccine dose compared to baseline titers (P < 0.001; for both age groups after each dose versus baseline). The seroconversion rates for O1 Inaba, O1 Ogawa, and O139 in both age groups were similar to those in previous studies with the vaccine. In conclusion, the killed, bivalent, whole-cell oral cholera vaccine has a good safety and reactogenicity profile, and is immunogenic in healthy adults and children. Trial Registration: ClinicalTrials.gov NCT00760825; CTRI/2012/01/002354.

This research explored if a social robot would play a role in facilitating the development of friendship between young children while they engage in playful learning. Grounded in child-robot interaction and child development literature, we instantiated four sessions of triadic interaction activities among two children and a robot, where the robot mediated the children's collaborative interactions. There were two types of robot-mediated activities (Conversational and Tablet assisted) with each type having two sessions and each session taking approx. 20 minutes, depending on the children. The activities were deployed with ten children (aged five to six) in an after-school program in a rural public school in the U.S. twice a week for two weeks. We video-recorded the sessions and later annotated these recordings for analysis. The friendship development between the children in a pair was observed in terms of five behavioral categories ("liking, togetherness, parity, agreement, and co-construction"). The results showed that both conversational and tablet-assisted robot mediation contributed complementarily to friendship development among the children.