Search

With the rapid development of modern robotics and medical industry, the use of rehabilitation robots for the treatment of patients with lower limb sports injuries has become one of the research hotspots at home and abroad. In order to achieve better rehabilitation treatment effect, trajectory planning of a three-degree-of-freedom lower limb rehabilitation robot is studied, and the motion law of healthy ankle joint is simulated to optimize the trajectory design of the lower limb rehabilitation robot. Based on the rehabilitation, injury mechanism, and motion form of the ankle joint, a comparative analysis of several low degree of freedom planar symmetric parallel mechanisms is conducted, and a design prototype using a 2UU-UPU mechanism as the rehabilitation actuator is determined; research on trajectory planning for lower limb rehabilitation training of lower limb rehabilitation robots, trajectory planning motion formulas for cycloidal motion laws and superimposed cycloidal motion laws are derived, and the rationality of trajectory under different rehabilitation training conditions is verified. In order to further explore a more reasonable rehabilitation trajectory, the optical motion capture system is used to collect the ankle joint movement trajectory in the sitting position, establish the rehabilitation trajectory constraints, improve the similarity between the planned trajectory and the human movement, and achieve better rehabilitation effect.

Objective To investigate the clinicopathological features and survival rate of oral squamous cell carcinoma patients in China. Methods The clinicopathological characteristics, stage, treatment modality, and 5-year disease-specific survival (DSS) rate of 1 915 OCSCC patients who received initial treatment at the Sun Yat-sen University Cancer Center from 1990 to 2013 were collected and analyzed. The clinicopathological characteristics, stage, treatment modality, and 5-year disease-specific survival (DSS) rate of OCSCC patients treated during the successive decades of 1990-1999, 2000-2009, and 2010-2013 were analyzed retrospectively to show the trends over time. Results The average age of all OCSCC patients who received initial treatment at this cancer center from 1990 to 2013 was 54.8 years (SD, 12.6 years). The sex ratio was approximately 2:1. The oral tongue was the site most prone for OCSCC, accounting for 63.6% of all cases. The proportions of early-stage (Ⅰ-Ⅱ) and advanced-stage (Ⅲ-Ⅳ) cases were approximate. Regarding the treatment modality, surgery-based treatment accounted for 80.4%. Survival analysis showed that the 5-year DSS rate of all cases was 57%. Survival decreased with age. The survival of females, nonsmokers, and nondrinkers was higher than that of males, smokers, and drinkers. The 5-year DSS rates of patients with squamous cell carcinoma of the lips, oral tongue, and other sites of the oral cavity were 81%, 63%, and 42%, respectively. The 5-year DSS rates of patients who received surgery-based treatment and nonsurgical treatment were 66% and 19%, respectively. The analysis of trends over time showed that in the period of 1990-1999 and 2010-2013, the age and sex ratio were relatively stable. The proportion of patients with squamous cell carcinoma of the lips and oral tongue gradually decreased, while the proportion of those with squamous cell carcinoma of the other sites of the oral cavity gradually increased. The proportion of surgery-based treatment increased from 77.7% to 91.3%. The 5-year DSS rate gradually increased from 53% in 1990-1999 to 64% in 2010-2013. The 5-year DSS rate of female patients increased significantly from 55% to 78%. However, the 5-year DSS rate of male patients was relatively stable. The 5-year DSS rate of patients who received surgery-based treatment gradually increased from 62% to 69%. Conclusion The 5-year DSS rate has steadily improved for OCSCC patients at this cancer center from 1990-2013, especially in female patients. The 5-year DSS rate of patients with squamous cell carcinoma of the oral tongue has reached the rate in developed countries worldwide. The proportion and survival rate of patients who received surgery-based treatment gradually increased. The survival rate of patients with squamous cell carcinoma of the other sites of the oral cavity was significantly lower than that of patients with squamous cell carcinoma of the lips and oral tongue, suggesting that more effort should be put into the treatment of patients with squamous cell carcinoma of the other sites of the oral cavity to improve the survival rate in the future.

Assessing the remanufacturability of used parts is a crucial basis for determining their value and optimal utilization methods. Due to the uncertain quality of used parts and the varying processing capacity of enterprises, coupled with the continuous expansion of the scale of the remanufacturing industry, the traditional weighted-analysis model, which considers all indicators at the same level, is inefficient for decision-making. In order to evaluate the remanufacturability of used parts more efficiently, a decision tree-based method is proposed, which hierarchically processes the evaluation criteria to enhance decision-making efficiency and adaptability. First, using a data platform, the remaining value of used parts reflected in the failure degree is analyzed and predicted, with the aid of artificial neural networks and the Weibull model, providing an initial remanufacturability assessment. Then, remanufacturability is assessed sequentially from the technical, economic, and environmental feasibility aspects, based on the enterprise's processing capabilities. Finally, the effectiveness of the proposed method is validated through a case study on the remanufacturing of used blades. [ABSTRACT FROM AUTHOR]

In recent years, optical fibers have found extensive use in special environments, including high-energy radiation scenarios like nuclear explosion diagnostics and reactor monitoring. However, radiation exposure, such as X-rays, gamma rays, and neutrons, can compromise fiber safety and reliability. Consequently, researchers worldwide are focusing on radiation-resistant fiber optic technology. This paper examines optical fiber radiation damage mechanisms, encompassing ionization damage, displacement damage, and defect centers. It also surveys the current research on radiation-resistant fiber optic design, including doping and manufacturing process improvements. Ultimately, it summarizes the effectiveness of various approaches and forecasts the future of radiation-resistant optical fibers. [ABSTRACT FROM AUTHOR]