Search

In mobile systems with low-altitude vehicles, integrated sensing and communication (ISAC) is considered an effective approach to increase the transmission rate due to limited spectrum resources. To further improve the ISAC performance, this paper proposes a novel method called integrated sensing and communication-movable antenna (ISAC-MA) to optimize the antenna's position. Our goal is to support low-space vehicles by optimizing radar and communication joint beamforming and antenna position in the presence of clutter. This scheme not only guarantees the required signal-to-noise ratio (SNR) for sensing but also further improves the SNR for communication. A successive convex approximation (SCA)-based block coordinate descent (BCD) algorithm is proposed to maximize communication capacity under the condition of sensing SNR. Numerical results show that, compared with the traditional ISAC system and various benchmark schemes, the proposed ISAC-MA system can achieve higher communication capacity under the same sensing SNR constraints.

For millimeter-wave (mmWave) non-orthogonal multiple access (NOMA) communication systems, we propose an innovative near-field (NF) transmission framework based on dynamic metasurface antenna (DMA) technology. In this framework, a base station (BS) utilizes the DMA hybrid beamforming technology combined with the NOMA principle to maximize communication efficiency between near-field users (NUs) and far-field users (FUs). In conventional communication systems, obtaining channel state information (CSI) requires substantial pilot signals, significantly reducing system communication efficiency. We propose a beamforming design scheme based on position information to address with this challenge. This scheme does not depend on pilot signals but indirectly obtains CSI by analyzing the geometric relationship between user position information and channel models. However, in practical applications, the accuracy of position information is challenging to guarantee and may contain errors. We propose a robust beamforming design strategy based on the worst-case scenario to tackle this issue. Facing with the multi-variable coupled non-convex problems, we employ a dual-loop iterative joint optimization algorithm to update beamforming using block coordinate descent (BCD) and derive the optimal power allocation (PA) expression. We analyze its convergence and complexity to verify the proposed algorithm's performance and robustness thoroughly. We validate the theoretical derivation of the CSI error bound through simulation experiments. Numerical results show that our proposed scheme performs better than traditional beamforming schemes. Additionally, the transmission framework exhibits strong robustness to NU and FU position errors, laying a solid foundation for the practical application of mmWave NOMA communication systems.

In future 6G networks, anti-jamming will become a critical challenge, particularly with the development of intelligent jammers that can initiate malicious interference, posing a significant security threat to communication transmission. Additionally, 6G networks have introduced mobile edge computing (MEC) technology to reduce system delay for edge user equipment (UEs). Thus, one of the key challenges in wireless communications is minimizing the system delay while mitigating interference and improving the communication rate. However, the current fixed-position antenna (FPA) techniques have limited degrees of freedom (DoF) and high power consumption, making them inadequate for communication in highly interfering environments. To address these challenges, this paper proposes a novel MEC anti-jamming communication architecture supported by mobile antenna (MA) technology. The core of the MA technique lies in optimizing the position of the antennas to increase DoF. The increase in DoF enhances the system's anti-jamming capabilities and reduces system delay. In this study, our goal is to reduce system delay while ensuring communication security and computational requirements. We design the position of MAs for UEs and the base station (BS), optimize the transmit beamforming at the UEs and the receive beamforming at the BS, and adjust the offloading rates and resource allocation for computation tasks at the MEC server. Since the optimization problem is a non-convex multi-variable coupled problem, we propose an algorithm based on penalty dual decomposition (PDD) combined with successive convex approximation (SCA). The simulation results demonstrate that the proposed MA architecture and the corresponding schemes offer superior anti-jamming capabilities and reduce the system delay compared to FPA.

Movable antennas (MAs), traditionally explored in antenna design, have recently garnered significant attention in wireless communications due to their ability to dynamically adjust the antenna positions to changes in the propagation environment. However, previous research has primarily focused on characterizing the performance limits of various MA-assisted wireless communication systems, with less emphasis on their practical implementation. To address this gap, in this article, we propose several general MA architectures that extend existing designs by varying several key aspects to cater to different application scenarios and tradeoffs between cost and performance. Additionally, we draw from fields such as antenna design and mechanical control to provide an overview of candidate implementation methods for the proposed MA architectures, utilizing either direct mechanical or equivalent electronic control. Simulation results are finally presented to support our discussion.

Dynamic metasurface antennas (DMAs) represent a novel transceiver array architecture for extremely large-scale (XL) communications, offering the advantages of reduced power consumption and lower hardware costs compared to conventional arrays. This paper focuses on near-field channel estimation for XL-DMAs. We begin by analyzing the near-field characteristics of uniform planar arrays (UPAs) and introducing the Oblong Approx. model. This model decouples elevation-azimuth (EL-AZ) parameters for XL-DMAs, providing an effective means to characterize the near-field effect. It offers simpler mathematical expressions than the second-order Taylor expansion model, all while maintaining negligible model errors for oblong-shaped arrays. Building on the Oblong Approx. model, we propose an EL-AZ-decoupled estimation framework that involves near- and far-field parameter estimation for AZ/EL and EL/AZ directions, respectively. The former is formulated as a distributed compressive sensing problem, addressed using the proposed off-grid distributed orthogonal least squares algorithm, while the latter involves a straightforward parallelizable search. Crucially, we illustrate the viability of decoupled EL-AZ estimation for near-field UPAs, exhibiting commendable performance and linear complexity correlated with the number of metasurface elements. Moreover, we design an measurement matrix optimization method with the Lorentzian constraint on DMAs and highlight the estimation performance degradation resulting from this constraint.

Flexible antenna arrays (FAAs), distinguished by their rotatable, bendable, and foldable properties, are extensively employed in flexible radio systems to achieve customized radiation patterns. This paper aims to illustrate that FAAs, capable of dynamically adjusting surface shapes, can enhance communication performances with both omni-directional and directional antenna patterns, in terms of multi-path channel power and channel angle Cram\'{e}r-Rao bounds. To this end, we develop a mathematical model that elucidates the impacts of the variations in antenna positions and orientations as the array transitions from a flat to a rotated, bent, and folded state, all contingent on the flexible degree-of-freedom. Moreover, since the array shape adjustment operates across the entire beamspace, especially with directional patterns, we discuss the sum-rate in the multi-sector base station that covers the $360^\circ$ communication area. Particularly, to thoroughly explore the multi-sector sum-rate, we propose separate flexible precoding (SFP), joint flexible precoding (JFP), and semi-joint flexible precoding (SJFP), respectively. In our numerical analysis comparing the optimized FAA to the fixed uniform planar array, we find that the bendable FAA achieves a remarkable $156\%$ sum-rate improvement compared to the fixed planar array in the case of JFP with the directional pattern. Furthermore, the rotatable FAA exhibits notably superior performance in SFP and SJFP cases with omni-directional patterns, with respective $35\%$ and $281\%$.

Future Terahertz communications exhibit significant potential in accommodating ultra-high-rate services. Employing extremely large-scale array antennas is a key approach to realize this potential, as they can harness substantial beamforming gains to overcome the severe path loss and leverage the electromagnetic advantages in the near field. This paper proposes novel estimation methods designed to enhance efficiency in Terahertz widely-spaced multi-subarray (WSMS) systems. Initially, we introduce three sparse channel representation methods: polar-domain representation (PD-R), multi-angular-domain representation (MAD-R), and two-dimensional polar-angular-domain representation (2D-PAD-R). Each method is meticulously developed for near-field WSMS channels, capitalizing on their sparsity characteristics. Building on this, we propose four estimation frameworks using the sparse recovery theory: polar-domain estimation (PD-E), multi-angular-domain estimation (MAD-E), two-stage polar-angular-domain estimation (TS-PAD-E), and two-dimensional polar-angular-domain estimation (2D-PAD-E). Particularly, 2D-PAD-E, integrating a 2D dictionary process, and TS-PAD-E, with its sequential approach to angle and distance estimation, stand out as particularly effective for near-field angle-distance estimation, enabling decoupled calculation of these parameters. Overall, these frameworks provide versatile and efficient solutions for WSMS channel estimation, balancing low complexity with high-performance outcomes. Additionally, they represent a fresh perspective on near-field signal processing.

A dual-robust design of beamforming is investigated in an integrated sensing and communication (ISAC) system.Existing research on robust ISAC waveform design, while proposing solutions to imperfect channel state information (CSI), generally depends on prior knowledge of the target's approximate location to design waveforms. This approach, however, limits the precision in sensing the target's exact location. In this paper, considering both CSI imperfection and target location uncertainty, a novel framework of joint robust optimization is proposed by maximizing the weighted sum of worst-case data rate and beampattern gain. To address this challenging problem, we propose an efficient two-layer iteration algorithm based on S-Procedure and convex hull. Finally, numerical results verify the effectiveness and performance improvement of our dual-robust algorithm, as well as the trade-off between communication and sensing performance.

This paper investigates flexible beamforming design in an integrated sensing and communication (ISAC) network with movable antennas (MAs). A bistatic radar system is integrated into a multi-user multiple-input-single-output (MU-MISO) system, with the base station (BS) equipped with MAs. This enables array response reconfiguration by adjusting the positions of antennas. Thus, a joint beamforming and antenna position optimization problem, namely flexible beamforming, is proposed to maximize communication rate and sensing mutual information (MI). The fractional programming (FP) method is adopted to transform the non-convex objective function, and we alternatively update the beamforming matrix and antenna positions. Karush-Kuhn-Tucker (KKT) conditions are employed to derive the close-form solution of the beamforming matrix, while we propose an efficient search-based projected gradient ascent (SPGA) method to update the antenna positions. Simulation results demonstrate that MAs significantly enhance the ISAC performance when employing our proposed algorithm, achieving a 59.8% performance gain compared to fixed uniform arrays.

Reconfigurable Intelligent Surfaces (RIS) show great promise in the realm of 6th generation (6G) wireless systems, particularly in the areas of localization and communication. Their cost-effectiveness and energy efficiency enable the integration of numerous passive and reflective elements, enabling near-field propagation. In this paper, we tackle the challenges of RIS-aided 3D localization and synchronization in multipath environments, focusing on the near-field of mmWave systems. Specifically, our approach involves formulating a maximum likelihood (ML) estimation problem for the channel parameters. To initiate this process, we leverage a combination of canonical polyadic decomposition (CPD) and orthogonal matching pursuit (OMP) to obtain coarse estimates of the time of arrival (ToA) and angle of departure (AoD) under the far-field approximation. Subsequently, distances are estimated using $l_{1}$-regularization based on a near-field model. Additionally, we introduce a refinement phase employing the spatial alternating generalized expectation maximization (SAGE) algorithm. Finally, a weighted least squares approach is applied to convert channel parameters into position and clock offset estimates. To extend the estimation algorithm to ultra-large (UL) RIS-assisted localization scenarios, it is further enhanced to reduce errors associated with far-field approximations, especially in the presence of significant near-field effects, achieved by narrowing the RIS aperture. Moreover, the Cram\'er-Rao Bound (CRB) is derived and the RIS phase shifts are optimized to improve the positioning accuracy. Numerical results affirm the efficacy of the proposed estimation algorithm.

This letter rethinks traditional precoding in multi-user wireless communications with movable antennas (MAs). Utilizing MAs for optimal antenna positioning, we introduce a sparse optimization (SO)-based approach focusing on regularized zero-forcing (RZF). This framework targets the optimization of antenna positions and the precoding matrix to minimize inter-user interference and transmit power. We propose an off-grid regularized least squares-based orthogonal matching pursuit (RLS-OMP) method for this purpose. Moreover, we provide deeper insights into antenna position optimization using RLS-OMP, viewed from a subspace projection angle. Overall, our proposed flexible precoding scheme demonstrates a sum rate that exceeds more than twice that of fixed antenna positions.

In this paper, reconfigurable intelligent surface (RIS) is employed in a millimeter wave (mmWave) integrated sensing and communications (ISAC) system. To alleviate the multi-hop attenuation, the semi-self sensing RIS approach is adopted, wherein sensors are configured at the RIS to receive the radar echo signal. Focusing on the estimation accuracy, the Cramer-Rao bound (CRB) for estimating the direction-of-the-angles is derived as the metric for sensing performance. A joint optimization problem on hybrid beamforming and RIS phaseshifts is proposed to minimize the CRB, while maintaining satisfactory communication performance evaluated by the achievable data rate. The CRB minimization problem is first transformed as a more tractable form based on Fisher information matrix (FIM). To solve the complex non-convex problem, a double layer loop algorithm is proposed based on penalty concave-convex procedure (penalty-CCCP) and block coordinate descent (BCD) method with two sub-problems. Successive convex approximation (SCA) algorithm and second order cone (SOC) constraints are employed to tackle the non-convexity in the hybrid beamforming optimization. To optimize the unit modulus constrained analog beamforming and phase shifts, manifold optimization (MO) is adopted. Finally, the numerical results verify the effectiveness of the proposed CRB minimization algorithm, and show the performance improvement compared with other baselines. Additionally, the proposed hybrid beamforming algorithm can achieve approximately 96% of the sensing performance exhibited by the full digital approach within only a limited number of radio frequency (RF) chains.

In this letter, a weighted minimum mean square error (WMMSE) empowered integrated sensing and communication (ISAC) system is investigated. One transmitting base station and one receiving wireless access point are considered to serve multiple users a sensing target. Based on the theory of mutual-information (MI), communication MI and sensing MI rate are utilized as the performance metrics under the presence of clutters. In particular, we propose an novel MI-based WMMSE-ISAC method by developing a unique transceiver design mechanism to maximize the weighted sensing and communication sum-rate of this system. Such a maximization process is achieved by utilizing the classical method -- WMMSE, aiming to better manage the effect of sensing clutters and the interference among users. Numerical results show the effectiveness of our proposed method, and the performance trade-off between sensing and communication is also validated.

As a promising technique, extremely large-scale (XL)-arrays offer potential solutions for overcoming the severe path loss in millimeter-wave (mmWave) and TeraHertz (THz) channels, crucial for enabling 6G. Nevertheless, XL-arrays introduce deviations in electromagnetic propagation compared to traditional arrays, fundamentally challenging the assumption with the planar-wave model. Instead, it ushers in the spherical-wave (SW) model to accurately represent the near-field propagation characteristics, significantly increasing signal processing complexity. Fortunately, the SW model shows remarkable benefits on sensing and communications (S\&C), e.g., improving communication multiplexing capability, spatial resolution, and degrees of freedom. In this context, this article first overviews hardware/algorithm challenges, fundamental potentials, promising applications of near-field S\&C enabled by XL-arrays. To overcome the limitations of existing XL-arrays with dense uniform array layouts and improve S\&C applications, we introduce sparse arrays (SAs). Exploring their potential, we propose XL-SAs for mmWave/THz systems using multi-subarray designs. Finally, several applications, challenges and resarch directions are identified.

This paper investigates the optimization of reconfigurable intelligent surface (RIS) in an integrated sensing and communication (ISAC) system. \red{To meet the demand of growing number of devices, power domain non-orthogonal multiple access (NOMA) is considered. However, traditional NOMA with a large number of devices is challenging due to large decoding delay and propagation error introduced by successive interference cancellation (SIC). Thus, OMA is integrated into NOMA to support more devices}. We formulate a max-min problem to optimize the sensing beampattern \red{with constraints on communication rate}, through joint power allocation, active beamforming and RIS phase shift design. To solve the non-convex problem with a non-smooth objective function, we propose a low complexity alternating optimization (AO) algorithm, where a closed form expression for the intra-cluster power allocation (intra-CPA) is derived, and penalty and successive convex approximation (SCA) methods are used to optimize the beamforming and phase shift design. Simulation results show the effectiveness of the proposed algorithm in terms of improving minimum beampattern gain (MBPG) compared with other baselines. Furthermore, the trade-off between sensing and communication is analyzed and demonstrated in the simulation results.

This paper investigates the potential of near-field localization using widely-spaced multi-subarrays (WSMSs) and analyzing the corresponding angle and range Cram\'er-Rao bounds (CRBs). By employing the Riemann sum, closed-form CRB expressions are derived for the spherical wavefront-based WSMS (SW-WSMS). We find that the CRBs can be characterized by the angular span formed by the line connecting the array's two ends to the target, and the different WSMSs with same angular spans but different number of subarrays have identical normalized CRBs. We provide a theoretical proof that, in certain scenarios, the CRB of WSMSs is smaller than that of uniform arrays. We further yield the closed-form CRBs for the hybrid spherical and planar wavefront-based WSMS (HSPW-WSMS), and its components can be seen as decompositions of the parameters from the CRBs for the SW-WSMS. Simulations are conducted to validate the accuracy of the derived closed-form CRBs and provide further insights into various system characteristics. Basically, this paper underscores the high resolution of utilizing WSMS for localization, reinforces the validity of adopting the HSPW assumption, and, considering its applications in communications, indicates a promising outlook for integrated sensing and communications based on HSPW-WSMSs.

Near-field communications present new opportunities over near-field channels, however, the spherical wavefront propagation makes near-field signal processing challenging. In this context, this paper proposes efficient near-field channel estimation methods for wideband MIMO mmWave systems with the aid of extremely large-scale reconfigurable intelligent surfaces (XL-RIS). For the wideband signals reflected by the analog RIS, we characterize their near-field beam squint effect in both angle and distance domains. Based on the mathematical analysis of the near-field beam patterns over all frequencies, a wideband spherical-domain dictionary is constructed by minimizing the coherence of two arbitrary beams. In light of this, we formulate a two-dimensional compressive sensing problem to recover the channel parameter based on the spherical-domain sparsity of mmWave channels. To this end, we present a correlation coefficient-based atom matching method within our proposed multi-frequency parallelizable subspace recovery framework for efficient solutions. Additionally, we propose a two-dimensional oracle estimator as a benchmark and derive its lower bound across all subcarriers. Our findings emphasize the significance of system hyperparameters and the sensing matrix of each subcarrier in determining the accuracy of the estimation. Finally, numerical results show that our proposed method achieves considerable performance compared with the lower bound and has a time complexity linear to the number of RIS elements.

Millimeter wave (mmWave) full-duplex (FD) is a promising technique for improving capacity by maximizing the utilization of both time and the rich mmWave frequency resources. Still, it has restrictions due to FD self-interference (SI) and mmWave's limited coverage. Therefore, this study dives into FD mmWave MIMO with the assistance of reconfigurable intelligent surfaces (RIS) for capacity improvement. First, we demonstrate the angular-domain reciprocity of FD antenna arrays under the far-field planar wavefront assumption. Accordingly, a strategy for joint downlink-uplink (DL-UL) channel estimation is presented. For estimating the SI channel, the direct channel, and the cascaded channel, the Khatri-Rao product-based compressive sensing (KR-CS), distributed CS (D-CS), and two-stage multiple measurement vector-based D-CS (M-D-CS) frameworks are proposed, respectively. Additionally, we propose a passive beamforming optimization solution based on the angular-domain cascaded channel. With hybrid beamforming architectures, a novel hybrid weighted minimum mean squared error method for SI cancellation (H-WMMSE-SIC) is proposed. Simulations have revealed that joint DL-UL processing significantly improves estimation performance in comparison to separate DL/UL channel estimation. Particularly, when the interference-to-noise ratio is less than 35 dB, our proposed H-WMMSE-SIC offers spectral efficiency performance comparable to fully-digital WMMSE-SIC. Finally, the computational complexity is analyzed for our proposed methods.

Double-reconfigurable intelligent surface (RIS) is a promising technique, achieving a substantial gain improvement compared to single-RIS techniques. However, in double-RIS-aided systems, accurate channel estimation is more challenging than in single-RIS-aided systems. This work solves the problem of double-RIS-based channel estimation based on active RIS architectures with only one radio frequency (RF) chain. Since the slow time-varying channels, i.e., the BS-RIS 1, BS-RIS 2, and RIS 1-RIS 2 channels, can be obtained with active RIS architectures, a novel multi-user two-timescale channel estimation protocol is proposed to minimize the pilot overhead. First, we propose an uplink training scheme for slow time-varying channel estimation, which can effectively address the double-reflection channel estimation problem. With channels' sparisty, a low-complexity Singular Value Decomposition Multiple Measurement Vector-Based Compressive Sensing (SVD-MMV-CS) framework with the line-of-sight (LoS)-aided off-grid MMV expectation maximization-based generalized approximate message passing (M-EM-GAMP) algorithm is proposed for channel parameter recovery. For fast time-varying channel estimation, based on the estimated large-timescale channels, a measurements-augmentation-estimate (MAE) framework is developed to decrease the pilot overhead.Additionally, a comprehensive analysis of pilot overhead and computing complexity is conducted. Finally, the simulation results demonstrate the effectiveness of our proposed multi-user two-timescale estimation strategy and the low-complexity Bayesian CS framework.

Reconfigurable intelligent surface (RIS) is an attractive technology to improve the transmission rate of millimetre-wave (mmWave) communication systems. The previous {research} on RIS technology mainly focused on improving the transmission rate and security rate of the mmWave communication systems. Since the emergence of RIS technology creates the conditions for generating an intelligent radio environment, it also has potential advantages on improving the localization accuracy of the mmWave communication systems. Deployed on walls and objects, RISs are capable of significantly improving communications and positioning coverage by controlling the multi-path reflection. This paper considers the RIS-aided mmWave localization system and proposes a joint beamforming and localization problem. However, since the objective function depends on the unknown UE's position and instantaneous channel state information (CSI), this beamforming and localization technology based on RIS assistance is challenging. To solve this problem, we propose a new joint localization and beamforming optimization (JLBO) algorithm, and give the proof of its convergence. The simulation results show that the RIS can improve the user localization accuracy of the system and the proposed scheme has a significant performance improvement compared with the traditional schemes.

In this letter, we investigate a cell-free network aided by hybrid reconfigurable intelligent surfaces (RISs), which consists of a mixture of passive and active elements that are capable of amplifying and reflecting the incident signal. To maximize the energy efficiency (EE) of the system, we formulate a joint transmit beamforming and RIS coefficients optimization problem. To deal with the fractional objective function, Dinkelbach transform, Lagrangian dual reformulation, and quadratic transform are utilized, with a block coordinate descent (BCD) based algorithm proposed to decouple the variables. In addition, successive convex approximation (SCA) method is applied to iteratively to tackle the non-convexity of the sub-problems. Simulation results illustrate the effectiveness and convergence of the proposed algorithm through analyzing the EE and sum rate performance with varying parameter settings. The proposed hybrid RISs schemes can achieve 92% of the sum rate but 188% of EE of active RISs schemes. As compared with passive RISs, 11% gain in sum rate can be achieved with comparable EE.

Given the high degree of computational complexity of the channel estimation technique based on the conventional one-dimensional (1-D) compressive sensing (CS) framework employed in the hybrid beamforming architecture, this study proposes two low-complexity channel estimation strategies. One is two-stage CS, which exploits row-group sparsity to estimate angle-of-arrival (AoA) first and uses the conventional 1-D CS method to obtain angle-of-departure (AoD). The other is two-dimensional (2-D) CS, which utilizes a 2-D dictionary to reconstruct the 2-D sparse signal. To conduct a meaningful comparison of the three CS frameworks, i.e., 1-D, two-stage and 2-D CS, the orthogonal match pursuit (OMP) algorithm is employed as the basic algorithm and is expanded to two variants for the proposed frameworks. Analysis and simulations demonstrate that when the 1-D CS method is compared, two-stage CS has somewhat lower performance but significantly lower computational complexity, while 2-D CS is not only the same as 1-D CS in terms of performance but also slightly lower in computational complexity than two-stage CS.

A novel sparse array synthesis method for non-uniform planar arrays is proposed, which belongs to compressive sensing (CS)-based systhesis. Particularly, we propose an off-grid refinement technique to simultaneously optimize the antenna element positions and excitations with a low complexity, in response to the antenna position optimization problem that is difficult for standard CS. More importantly, we take into account the minimum inter-element spacing constraint for ensuring the physically realizable solution. Specifically, the off-grid Orthogonal Match Pursuit (OMP) algorithm is first proposed with low complexity and then off-grid Look Ahead Orthogonal Match Pursuit (LAOMP) is designed with better synthesis performance but higher complexity. In addition, simulation results have shown the proposed schemes have more advantages in computational complexity and synthesis performances compared with the related method.

Recent research has focused on reconfigurable intelligent surface (RIS)-assisted cell-free systems with the goal of enhancing coverage and lowering the cost of cell-free networks. However, current research makes the assumption that the perfect channel state information is known. Channel acquisition is, certainly, a difficulty in this case. This work is aimed at investigating RIS-assisted cell-free channel estimation. Toward this end, two unique characteristics are pointed out: 1) For all users, a common channel exists between the base station (BS) and the RIS; and 2) For all BSs, a common channel exists between the RIS and the user. Based on these two characteristics, cascaded and two-timescale channel estimation concerns are studied. Subsequently, two solutions for tackling with the two issues are presented respectively: a three-dimensional multiple measurement vector (3D-MMV)-based compressive sensing technique and a multi-BS cooperative pilot-reduced methodology. Finally, simulations illustrate the effectiveness of the schemes we have presented.

Due to the very narrow beam used in millimeter wave communication (mmWave), beam alignment (BA) is a critical issue. In this work, we investigate the issue of mmWave BA and present a novel beam alignment scheme on the basis of a machine learning strategy, Bayesian optimization (BO). In this context, we consider the beam alignment issue to be a black box function and then use BO to find the possible optimal beam pair. During the BA procedure, this strategy exploits information from the measured beam pairs to predict the best beam pair. In addition, we suggest a novel BO algorithm based on the gradient boosting regression tree model. The simulation results demonstrate the spectral efficiency performance of our proposed schemes for BA using three different surrogate models. They also demonstrate that the proposed schemes can achieve spectral efficiency with a small overhead when compared to the orthogonal match pursuit (OMP) algorithm and the Thompson sampling-based multi-armed bandit (TS-MAB) method.

In this letter, we analyze a terrestrial wireless communication network assisted by an aerial intelligent reflecting surface (IRS). We consider a packet scheduling problem at the ground base station (BS) aimed at improving the information freshness by selecting packets based on their AoI. To further improve the communication quality, the trajectory of the unmanned aerial vehicle (UAV) which carries the IRS is optimized with joint active and passive beamforming design. To solve the formulated non-convex problem, we propose an iterative alternating optimization problem based on a successive convex approximation (SCA) algorithm. The simulation results shows significant performance improvement in terms of weighted sum AoI, and the SCA solution converges quickly with low computational complexity.

Although Terahertz communication systems can provide high data rates, it needs high directional beamforming at transmitters and receivers to achieve such rates over a long distance. Therefore, an efficient beam training method is vital to accelerate the link establishment. In this study, we propose a low-complexity beam training scheme of terahertz communication system which uses a low-cost small-scale hybrid architecture to assist a large-scale array for data transmission. The proposed scheme includes two key stages: (1) coarse AoAs/AoDs estimation for beam subset optimization in auxiliary array stage, and (2) accurate AoAs/AoDs estimation by exploiting channel sparsity in data transmission array stage. The analysis shows that the complexity of the scheme is linear with the number of main paths, and thus greatly reduces the complexity of beam training. Simulation results have verified the better performance in spectral efficiency of the proposed scheme than that of the related work., Comment: 5 pages 3 figure3

With the increasing popularity of large-scale antenna arrays, the subarraying technology becomes more attractive. In this paper, we propose two effective subarraying methods right after formulating the subarray synthesis as a compressive sensing (CS) problem: i) Orthogonal matching pursuit based subarray synthesis (OMP-SS), a common CS approach which can be used for the subarray synthesis to attain the subarray information (the subarray number, the number of elements per subarray and corresponding excitation coeffcients) and ii) Off-grid orthogonal matching pursuit based subarray synthesis (OGOMP-SS), an advanced approach for optimizing antenna elements positions and the subarray information mentioned above simultaneously. In addition, two user-defined modes are designed for different application scenarios, wherein, mode-1 is to optimize the pattern synthesis performance for the given the number of subarrays, and mode-2 is to obtain the minimum number of subarrays for the cases when the pattern synthsis accuracy is satisfied. Finally, our simulation results reveal that it is of paramount significance to optimize antenna elements positions for the subarray synthesis performance on the one hand and demonstrate the excellent performances of proposed schemes in comparison with other competitive state-of-the-art subarray synthesis methods on the other hand., Comment: 10 pages, 20 figures